In a container of negligible mass, 0.380 kg of ice at an initial temperature of -36.0 ∘C is mixed with a mass m of water that has an initial temperature of 80.0∘C. No heat is lost to the surroundings.
A-
If the final temperature of the system is 29.0 ∘C∘C, what is the mass mm of the water that was initially at 80.0∘C∘C?
Express your answer with the appropriate units.

The terminal velocity of the skydiver is approximately 35.77 m/s. This means that  the skydiver reaches this speed, the drag force exerted by the air will equal the person's weight, and they will no longer accelerate.

The terminal velocity of a skydiver with a mass of 95.0 kg and a surface area of 1.5 m^2 can be determined by setting the drag force equal to the person's weight. The drag force equation used is F_D = (1/2) * ρ * A * v^2, where ρ represents air density, A is the surface area, and v is the velocity. By equating the drag force to the weight, we can solve for the terminal velocity.

To find the terminal velocity, we need to set the drag force equal to the weight of the skydiver. The drag force equation is given as F_D = (1/2) * ρ * A * v^2, where ρ is the air density, A is the surface area, and v is the velocity. Since we want the drag force to equal the weight, we can write this as F_D = m * g, where m is the mass of the skydiver and g is the acceleration due to gravity.

By equating the drag force and the weight, we have:

(1/2) * ρ * A * v^2 = m * gWe can rearrange this equation to solve for the terminal velocity v:

v^2 = (2 * m * g) / (ρ * A)

m = 95.0 kg (mass of the skydiver)

A = 1.5 m^2 (surface area)

g = 9.8 m/s^2 (acceleration due to gravity)The air density ρ is not given, but it can be estimated to be around 1.2 kg/m^3.Substituting the values into the equation, we have:

v^2 = (2 * 95.0 kg * 9.8 m/s^2) / (1.2 kg/m^3 * 1.5 m^2)

v^2 = 1276.67Taking the square root of both sides, we get:

v ≈ 35.77 m/s Therefore, the terminal velocity of the skydiver is approximately 35.77 m/s. This means that  the skydiver reaches this speed, the drag force exerted by the air will equal the person's weight, and they will no longer accelerate.

Learn more about drag force Click here:

brainly.com/question/13258892

#SPJ11

The lithosphere of the Earth fractured into plates as a result of the convection of the underlying mantle. The mantle convection is what is driving the movement of the lithospheric plates

The rigid outer shell of the Earth, composed of the crust and the uppermost part of the mantle, is known as the lithosphere. It is split into large, moving plates that ride atop the planet's more fluid upper mantle, the asthenosphere. The lithosphere fractured into plates as a result of the convection of the underlying mantle. As the mantle heats up and cools down, convection currents occur. Hot material is less dense and rises to the surface, while colder material sinks toward the core.

This convection of the mantle material causes the overlying lithospheric plates to move and break up over time.

Learn more about lithosphere visit:

brainly.com/question/454260

#SPJ11

This is a dictionary of physical terms and formulas related to electricity, including definitions and problem-solving examples on electric current, voltage, and resistance. The resistance of the 2nd resistor is 54 [tex]\Omega[/tex], the total resistance of the circuit is 25 [tex]\Omega[/tex] and the current strength is 1.5 A, and the work is 198000 J

For more questions on electric current

https://brainly.com/question/1100341

#SPJ8

Given that an object is dropped from rest on another planet and hits the ground, travelling a distance of 0.8 m in 0.5 s and bounces back up and stops exactly where it started from.

Let's find out the acceleration of gravity on this planet. Step-by-step explanation: a) To calculate the acceleration of gravity on this planet, we use the formula  d = 1/2 gt².Using this formula, we get0.8 m = 1/2 g (0.5 s)²0.8 m = 0.125 g0.125 g = 0.8 mg = 0.8/0.125g = 6.4 m/s²The acceleration of gravity on this planet is 6.4 m/s².b) Taking downward to be positive, the ball's average speed is equal to its magnitude of average velocity on the way down.

Therefore, the average speed of the ball is equal to the magnitude of its average velocity on the way down.c) The ball's initial speed (when dropped) is zero, so the magnitude of its average velocity on the way up is equal to its final velocity divided by the time taken to stop. Using the formula v = u + gt where v = 0 m/s and u = -6.4 m/s² (negative because the ball is moving up), we get0 = -6.4 m/s² + g*t t = 6.4/gt = √(0.8 m/6.4 m/s²)t = 0.2 seconds.

To know more about distance visit:

https://brainly.com/question/13034462

#SPJ11

(a) The average velocity of the particle during the time interval from 2.00 to 3.00 seconds is -2.50 cm/s.

(b) The instantaneous velocity at t = 2.00 seconds is -2.50 cm/s.

(c) The instantaneous velocity at t = 3.00 seconds is -2.50 cm/s.

(d) The instantaneous velocity at t = 2.50 seconds is -2.50 cm/s.

(e) The instantaneous velocity when the particle is midway between its positions at -2.00 and 3.00 seconds is -2.50 cm/s.

(f) The graph of x versus t would show a linear relationship with a downward slope of -2.50 cm/s.

The given equation for the position of the particle along the x-axis is -7.00 + 2.50e, where t represents time in seconds. In this equation, the term -7.00 represents the initial position of the particle at t = 0 seconds, and 2.50e represents the displacement or change in position with respect to time.

(a) To calculate the average velocity, we need to find the total displacement of the particle during the given time interval and divide it by the duration of the interval.

In this case, the displacement is given by the difference between the positions at t = 3.00 seconds and t = 2.00 seconds, which is (2.50e) at t = 3.00 seconds minus (2.50e) at t = 2.00 seconds. Simplifying this expression, we get -2.50 cm/s as the average velocity.

(b) The instantaneous velocity at t = 2.00 seconds can be found by taking the derivative of the position equation with respect to time and evaluating it at t = 2.00 seconds. The derivative of -7.00 + 2.50e with respect to t is simply 2.50e. Substituting t = 2.00 seconds into this expression, we get -2.50 cm/s as the instantaneous velocity.

(c) Similarly, to find the instantaneous velocity at t = 3.00 seconds, we evaluate the derivative 2.50e at t = 3.00 seconds, which also gives us -2.50 cm/s.

(d) The instantaneous velocity at t = 2.50 seconds can be determined in the same way, by evaluating the derivative 2.50e at t = 2.50 seconds, resulting in -2.50 cm/s.

(e) When the particle is midway between its positions at -2.00 and 3.00 seconds, the time is 2.00 + (3.00 - 2.00)/2 = 2.50 seconds. Therefore, the instantaneous velocity at this time is also -2.50 cm/s.

(f) The graph of x versus t would be a straight line with a slope of 2.50 cm/s, indicating a constant velocity of -2.50 cm/s throughout the given time interval.

Learn more about Velocity

brainly.com/question/30559316

#SPJ11

According to Einstein's postulates of special relativity, the speed of light in a vacuum is constant and does not depend on the motion of the source or the observer.

This fundamental principle is known as the constancy of the speed of light.

True or False:

1) The speed of light is a constant in all uniformly moving reference frames - True

2) All reference frames are arbitrary - False

3) Motion can only be measured relative to one fixed point in the universe - False

4) The laws of physics work the same whether the reference frame is at rest or moving at a uniform speed - True

5) Within a reference frame, it can be experimentally determined whether or not the reference frame is moving - False

6) The speed of light varies with the speed of the source - False

Learn more about speed of light here : brainly.com/question/28224010
#SPJ11

The best possible coefficient of performance (COPret) for the given temperatures is approximately 5.0. The work done by the refrigerator is calculated to be 6.25 x 10 J. The cost of performing this work is approximately 0.0182¢. Finally, the amount of heat transferred into the warm environment is determined to be 9.375 x 10.

The coefficient of performance (COP) of a refrigerator is a measure of its efficiency and is defined as the ratio of the amount of heat transferred from the cold environment to the work done by the refrigerator. For an ideal refrigerator, the COP can be determined using the formula:

COPret = Qc / W

where Qc is the amount of heat transferred from the cold environment and W is the work done by the refrigerator.

To find the best possible COPret for the given temperatures, we need to use the Carnot refrigerator model, which assumes that the refrigerator operates in a reversible cycle. The Carnot COP (COPrel) can be calculated using the formula:

COPrel = Th / (Th - Tc)

where Th is the absolute temperature of the hot environment and Tc is the absolute temperature of the cold environment.

Converting the given temperatures to Kelvin, we have:

Th = 39.0°C + 273.15 = 312.15 K

Tc = -13.0°C + 273.15 = 260.15 K

Substituting these values into the equation, we can calculate the COPrel:

COPrel = 312.15 K / (312.15 K - 260.15 K) ≈ 5.0

Now, we can use the COPrel value to determine the work done by the refrigerator. Rearranging the COPret formula, we have:

W = Qc / COPret

Given that Qc = 3.125 x 10 J, we can calculate the work done:

W = (3.125 x 10 J) / 5.0 = 6.25 x 10 J

Next, we can calculate the cost of doing this work, considering the given cost of 10.5¢ per 3.60 × 10^6 J (a kilowatt-hour). First, we convert the work from joules to kilowatt-hours:

W_kWh = (6.25 x 10 J) / (3.60 × 10^6 J/kWh) ≈ 0.0017361 kWh

To calculate the cost, we use the conversion rate:

Cost = (0.0017361 kWh) × (10.5¢ / 1 kWh) ≈ 0.01823¢ ≈ 0.0182¢

Finally, we need to determine the amount of heat transferred into the warm environment (Qw). For an ideal refrigerator, the total heat transferred is the sum of the heat transferred to the cold environment and the work done:

Qw = Qc + W = (3.125 x 10 J) + (6.25 x 10 J) = 9.375 x 10 J

In summary, the best possible coefficient of performance (COPret) for the given temperatures is approximately 5.0. The work done by the refrigerator is calculated to be 6.25 x 10 J. The cost of performing this work is approximately 0.0182¢. Finally, the amount of heat transferred into the warm environment is determined to be 9.375 x 10.

Learn more about coefficient here,

https://brainly.com/question/1038771

#SPJ11

Light has been a matter of extensive research, and experiments have led to various hypotheses regarding the nature of light. The two most notable hypotheses are the wave model and the particle model of light.

These models explain the behavior of light concerning the properties of waves and particles, respectively. Here are the observations for each model:a) Wave model: The light can travel through a vacuum.b) Wave model: The speed of the light is less in water than in air.c) Wave model

e) Wave model: The light can be simultaneously reflected and transmitted at certain interfaces.None of the observations contradicts the wave model of light. In fact, all the above observations are consistent with the wave model of light.The correct answer is d) The beam of light travels in a straight line. This observation is consistent with the particle model of light.

To know more about extensive visit:

https://brainly.com/question/12937142

#SPJ11

The distance Δx between the points where the ions strike the detector is 0.0971 meters. In a mass spectrometer, ions are accelerated by a potential difference and then move in a circular path due to the presence of a magnetic field.

To solve this problem, we can use the equation for the radius of the circular path:

r = (m*v) / (|q| * B)

where m is the mass of the ion, v is its velocity, |q| is the magnitude of the charge, and B is the magnetic field strength. Since the ions are accelerated from rest, we can use the equation for the kinetic energy to find their velocity:

KE = q * V

where KE is the kinetic energy, q is the charge, and V is the potential difference.

Once we have the radius, we can calculate the distance Δx between the two points where the ions strike the detector. Since the ions follow circular paths with the same radius, the distance between the two points is equal to the circumference of the circle, which is given by:

Δx = 2 * π * r

By substituting the given values into the equations and performing the calculations, we find that Δx is approximately 0.0971 meters.

To learn more about distance click here brainly.com/question/31713805

#SPJ11

The radius of Comet C is approximately 5.87 x 10^-6 meters, given its mass of 498 kg and gravitational acceleration of 31 m/s².

To calculate the radius of Comet C, we can use the formula for gravitational acceleration:

a = G * (m / r²),

where:

We can rearrange the formula to solve for r:

r² = G * (m / a).

Substituting the given values:

G = 6.67430 x 10^-11 m³/(kg·s²),

m = 498 kg, and

a = 31 m/s²,

we can calculate the radius:

r² = (6.67430 x 10^-11 m³/(kg·s²)) * (498 kg / 31 m/s²).

r² = 1.0684 x 10^-9 m⁴/(kg·s²) * kg/m².

r² = 3.4448 x 10^-11 m².

Taking the square root of both sides:

r ≈ √(3.4448 x 10^-11 m²).

r ≈ 5.87 x 10^-6 m.

Therefore, the radius of Comet C is approximately 5.87 x 10^-6 meters.

To learn more about gravitational acceleration, Visit:

https://brainly.com/question/14374981

#SPJ11

a) Number of photons emitted per second = 2.64 × 10²⁰ photons/s;  b) distance from the lamp will be 4.58 × 10⁷ m ; c) rate per square meter at 2.10 m distance from the lamp is 1.21 × 10³ W/m².

(a) Rate of photons emitted by the lamp: It is given that sodium lamp emits light at power P = 90.0 W and at the wavelength λ = 581 nm.

Number of photons emitted per second is given by: P = E/t where E is the energy of each photon and t is the time taken for emitting N photons. E = h c/λ where h is the Planck's constant and c is the speed of light.

Substituting E and P values, we get: N = P/E

= Pλ/(h c)

= (90.0 J/s × 581 × 10⁻⁹ m)/(6.63 × 10⁻³⁴ J·s × 3.0 × 10⁸ m/s)

= 2.64 × 10²⁰ photons/s

Therefore, the rate of photons emitted by the lamp is 2.64 × 10²⁰ photons/s.

(b) Distance from the lamp: Let the distance from the lamp be r and the area of the totally absorbing screen be A. Rate of absorption of photons by the screen is given by: N/A = P/4πr², E = P/N = (4πr²A)/(Pλ)

Substituting P, A, and λ values, we get: E = 4πr²(1.00 photon/(cm²·s))/(90.0 J/s × 581 × 10⁻⁹ m)

= 4.58 × 10⁷ m

Therefore, the distance from the lamp will be 4.58 × 10⁷ m.

(c) Rate per square meter at 2.10 m distance from the lamp: Let the distance from the lamp be r and the area of the screen be A.

Rate of interception of photons by the screen is given by: N/A = P/4πr²

N = Pπr²

Substituting P and r values, we get: N = 90.0 W × π × (2.10 m)²

= 1.21 × 10³ W

Therefore, the rate per square meter at 2.10 m distance from the lamp is 1.21 × 10³ W/m².

To know more about photons, refer

https://brainly.com/question/15946945

#SPJ11

Lifting an elephant with a forklift is an energy intensive task requiring 200,000 J of energy. The average forklift has a power output of 10 kW (1 kW is equal to 1000 W) and can accomplish the task in 20 seconds. The forklift would need to have a power output of 40,000 W or 40 kW to lift the elephant in 5 seconds.

To determine the power required for the forklift to complete the task in 5 seconds, we can use the equation:

Power = Energy / Time

Given that the energy required to lift the elephant is 200,000 J and the time taken to complete the task is 20 seconds, we can calculate the power output of the average forklift as follows:

Power = 200,000 J / 20 s = 10,000 W

Now, let's calculate the power required to complete the task in 5 seconds:

Power = Energy / Time = 200,000 J / 5 s = 40,000 W

Therefore, the forklift would need to have a power output of 40,000 W or 40 kW to lift the elephant in 5 seconds.

For more such questions on power, click on:

https://brainly.com/question/2248465

#SPJ8

The transmitted intensity through the three polarizing plates is approximately 1.296 units.

To determine the transmitted intensity through the three polarizing plates, considering Malus's Law,

I = Ii × cos²(θ)

Where:

I: transmitted intensity

Ii: incident intensity

θ: angle between the transmission axis of the polarizer and the plane of polarization of the incident light.

Given,  

Ii = 10.0 units  

θ1 = 20.0°

θ2 = 40.0°

θ3 = 60.0°

Calculate the transmitted intensity through each plate:

I₁ = 10.0 × cos²(20.0°)

I₁ ≈ 10.0 × (0.9397)²

I₁ ≈ 8.821 units

I₂ = 8.821 ×cos²(40.0°)

I₂ ≈ 8.821 ×(0.7660)²

I₂ ≈ 5.184 units

I₃ = 5.184 × cos²(60.0°)

I₃ ≈ 5.184 × (0.5000)²

I₃ ≈ 1.296 units

Therefore, the transmitted intensity is 1.296 units.

To know more about Malus's Law, click here:

https://brainly.com/question/15554133

#SPJ4

The electromagnetic moment of a sphere with uniform polarization P and uniform magnetization M can be calculated by considering the electric dipole moment due to polarization and the magnetic dipole moment due to magnetization.

To calculate the electromagnetic moment of the sphere, we need to consider the contributions from both polarization and magnetization. The electric dipole moment due to polarization can be calculated using the formula:

p = 4/3 * π * ε₀ * R³ * P,

where p is the electric dipole moment, ε₀ is the vacuum permittivity, R is the radius of the sphere, and P is the uniform polarization.

The magnetic dipole moment due to magnetization can be calculated using the formula:

m = 4/3 * π * R³ * M,

where m is the magnetic dipole moment and M is the uniform magnetization.

Since the electric and magnetic dipole moments are vectors, the total electromagnetic moment is given by the vector sum of these two moments:

μ = p + m.

Therefore, the electromagnetic moment of the sphere with uniform polarization P and uniform magnetization M is the vector sum of the electric dipole moment due to polarization and the magnetic dipole moment due to magnetization.

Learn more about vector here:
https://brainly.com/question/32317496

#SPJ11

Resistance (R) = 12.87 Ω

Inductance (L) = 35 mH (or 0.000035 H)

a. Phasor diagram of the circuit is given below:b. The two circuit elements are connected are inductance (L) and resistance (R).

In a purely inductive circuit, voltage and current are out of phase with each other by 90°. In a purely resistive circuit, voltage and current are in phase with each other. Hence, by comparing the phase difference between voltage and current, we can determine that the circuit contains inductance (L) and resistance (R).

c. We know that;

Maximum voltage (V) = 175 VMaximum current (I) = 13.6

APhase angle (θ) = 37°

We can find out the Impedance (Z) of the circuit by using the below relation;

Impedance (Z) = V / IZ = 175 / 13.6Z = 12.868 Ω

Now, we can find out the values of resistance (R) and inductance (L) using the below relations;

Z = R + XL

Here, XL = 2πfL

Where f = 90 Hz

Therefore,

XL = 2π × 90 × LXL = 565.49 LΩ

Z = R + XL12.868 Ω = R + 565.49 LΩ

Maximum current (I) = 13.6 A,

so we can calculate the maximum value of R and L using the below relations;

V = IZ175 = 13.6 × R

Max R = 175 / 13.6

Max R = 12.87 Ω

We can calculate L by substituting the value of R

Max L = (12.868 − 12.87) / 565.49

Max L = 0.000035 H = 35 mH

Therefore, the two circuit elements are;

Resistance (R) = 12.87 Ω

Inductance (L) = 35 mH (or 0.000035 H)

learn more about Resistance on:

https://brainly.com/question/28135236

#SPJ11

To find the angle between the wire and the magnetic field, we can use the formula for the magnetic force on a current-carrying wire:

F = BILsinθ

Where:

F = Magnetic force

B = Magnetic field strength

I = Current

L = Length of the wire

θ = Angle between the wire and the magnetic field

We are given:

F = 0.55 N

B = 1.25 T

I = 6.5 A

L = 45 cm = 0.45 m

Let's rearrange the formula to solve for θ:

θ = sin^(-1)(F / (BIL))

Substituting the given values:

θ = sin^(-1)(0.55 N / (1.25 T * 6.5 A * 0.45 m))

Now we can calculate θ:

θ = sin^(-1)(0.55 / (1.25 * 6.5 * 0.45))

Using a calculator, we find:

θ ≈ sin^(-1)(0.0558)

θ ≈ 3.2 degrees (approximately)

Therefore, the angle between the wire and the magnetic field is approximately 3.2 degrees.

Learn more about angle on:

https://brainly.com/question/30147425

#SPJ4

The angle is approximately 6.6°.

The formula for finding the magnetic force acting on a current carrying conductor in a magnetic field is,

F = BILSinθ Where,

F is the magnetic force in Newtons,

B is the magnetic field in Tesla

I is the current in Amperes

L is the length of the conductor in meters and

θ is the angle between the direction of current flow and the magnetic field lines.

Substituting the given values, we have,

F = 0.55 NB

  = 1.25 TI

  = 6.5 AL

  = 45/100 meters (0.45 m)

Let θ be the angle between the wire and the 1.25 T field.

The force equation becomes,

F = BILsinθ 0.55

  = (1.25) (6.5) (0.45) sinθ

sinθ = 0.55 / (1.25 x 6.5 x 0.45)

       = 0.11465781711

sinθ = 0.1147

θ = sin^-1(0.1147)

θ = 6.6099°

  = 6.6°

Learn more about magnetic force from the given link

https://brainly.com/question/2279150

#SPJ11

1.05 Coulombs of charge moves through the torso and  approximately 6.54 × 10^18 electrons pass through the wires connected to the patient.

(a) To calculate the amount of charge moved,

We can use the equation:

Charge (Q) = Current (I) * Time (t)

Given:

Current (I) = 15.0 A

Time (t) = 0.0700 s

Substituting the values into the equation:

Q = 15.0 A * 0.0700 s

Q = 1.05 C

Therefore, 1.05 Coulombs of charge moves.

(b) To determine the number of electrons that pass through the wires,

We can use the relationship:

1 Coulomb = 6.242 × 10^18 electrons

Given:

Charge (Q) = 1.05 C

Substituting the value into the equation:

Number of electrons = 1.05 C * 6.242 × 10^18 electrons/Coulomb

Number of electrons ≈ 6.54 × 10^18 electrons

Therefore, approximately 6.54 × 10^18 electrons pass through the wires connected to the patient.

Learn more about Coulomb's law from the given link :

https://brainly.com/question/506926

#SPJ11

The total horizontal distance traveled by the ball is 10.81 m. The maximum vertical velocity of the ball is 14.66 m/s. The final vertical velocity is 6.1 m/s. The time of flight is 1.42s.

[tex]v^2 = u^2[/tex]+ 2as

where v is the final velocity, u is the initial velocity, a is the acceleration, and s is the displacement.

In this case, the initial vertical velocity is 6.1 m/s, the final vertical velocity is 0 m/s (at the maximum height), and the acceleration is -9.8 [tex]m/s^2[/tex](assuming downward acceleration due to gravity). The displacement can be calculated as the difference between the initial and final heights: s = 9.1 m - 0 m = 9.1 m.

0 = [tex](6.1 m/s)^2[/tex] - 2[tex](-9.8 m/s^2[/tex])(9.1 m)

[tex]u^2[/tex] = 36.41 [tex]m^2/s^2[/tex] + 178.36[tex]m^2/s^2[/tex]

[tex]u^2 = 214.77 m^2/s^2[/tex]

u = 14.66 m/s

So, the maximum vertical velocity of the ball is 14.66 m/s.

(b) The total horizontal distance traveled by the ball can be determined using the equation:

d = v * t

where d is the distance, v is the horizontal velocity, and t is the time of flight. Since there is no horizontal acceleration, the horizontal velocity remains constant throughout the motion. From the given information, the horizontal velocity is 7.61 m/s.

To find the time of flight, we can use the equation:

s = ut + (1/2)[tex]at^2[/tex]

where s is the displacement in the vertical direction, u is the initial vertical velocity, a is the acceleration, and t is the time of flight.

In this case, the displacement is -9.1 m (since the ball is moving upward and then returning to the ground), the initial vertical velocity is 6.1 m/s, the acceleration is [tex]-9.8 m/s^2[/tex], and the time of flight is unknown.

-9.1 m = (6.1 m/s)t + (1/2)(-9.8 m/s^2)t^2

Simplifying the equation gives a quadratic equation:

[tex]-4.9t^2[/tex] + 6.1t - 9.1 = 0

Solving this equation gives two possible values for t: t = 1.24 s or t = 1.42 s. Since time cannot be negative, we choose the positive value of t, which is t = 1.42 s.

Now, we can calculate the horizontal distance using the equation:

d = v * t = 7.61 m/s * 1.42 s = 10.81 m

So, the total horizontal distance traveled by the ball is 10.81 m.

(c) The velocity of the ball just before it hits the ground can be determined by considering the vertical motion. The initial vertical velocity is 6.1 m/s, and the acceleration due to gravity is -9.8[tex]m/s^2[/tex].

v = u + at

where v is the final velocity, u is the initial velocity, a is the acceleration, and t is the time, we can calculate the final vertical velocity.

v = 6.1 m/s + (-9.8 [tex]m/s^2[/tex])(1.42 s)

v = 6.1 m/s.

Learn more about velocity here:

brainly.com/question/30559316

#SPJ11

The minimum uncertainty in the vertical component of the momentum of each photon after passing through the slit is approximately[tex]5.45 * 10^{(-28)} kg m/s.[/tex]

We can use the Heisenberg uncertainty principle. The uncertainty principle states that the product of the uncertainties in position and momentum of a particle is greater than or equal to Planck's constant divided by 4π.

The formula for the uncertainty principle is given by:

Δx * Δp ≥ h / (4π)

where:

Δx is the uncertainty in position

Δp is the uncertainty in momentum

h is Planck's constant [tex](6.62607015 * 10^{(-34)} Js)[/tex]

In this case, we want to find the uncertainty in momentum (Δp). We know the wavelength of the laser light (λ) and the width of the slit (d). The uncertainty in position (Δx) can be taken as half of the width of the slit (d/2).

Given:

Wavelength (λ) = 574 nm = [tex]574 *10^{(-9)} m[/tex]

Slit width (d) = 0.0610 mm = [tex]0.0610 * 10^{(-3)} m[/tex]

Distance to the screen (L) = 2.00 m

We can find the uncertainty in position (Δx) as:

Δx = d / 2 = [tex]0.0610 * 10^{(-3)} m / 2[/tex]

Next, we can calculate the uncertainty in momentum (Δp) using the uncertainty principle equation:

Δp = h / (4π * Δx)

Substituting the values, we get:

Δp = [tex](6.62607015 * 10^{(-34)} Js) / (4\pi * 0.0610 * 10^{(-3)} m / 2)[/tex]

Simplifying the expression:

Δp = [tex](6.62607015 * 10^{(-34)} Js) / (2\pi * 0.0610 * 10^{(-3)} m)[/tex]

Calculating Δp:

Δp ≈  [tex]5.45 * 10^{(-28)} kg m/s.[/tex]

To know more about Planck's constant, here

brainly.com/question/30763530

#SPJ4

The intensity level from the lawnmower, at a distance of 20 answer: m, is approximately 0.000012 dB.

When we move 20 m away from the lawnmower, we need to calculate the new intensity level at this position. Intensity level is measured in decibels (dB) and can be calculated using the formula:

IL = 10 * log10(I/I0),

where I is the intensity and I0 is the reference intensity (typically 10^(-12) W/m^2).

We can use the inverse square law for sound propagation, which states that the intensity of sound decreases with the square of the distance from the source. The new intensity (I2) can be calculated as follows:

I2 = I1 * (r1^2/r2^2),

where I1 is the initial intensity, r1 is the initial distance, and r2 is the new distance.

In this case, the initial intensity (I1) is 0.005 W/m^2 (given), the initial distance (r1) is 3 m (given), and the new distance (r2) is 20 m (given). Plugging these values into the formula, we get:

I2 = 0.005 * (3^2/20^2)

   = 0.0001125 W/m^2.

Convert the new intensity to dB:

Now that we have the new intensity (I2), we can calculate the intensity level (IL) in decibels using the formula mentioned earlier:

IL = 10 * log10(I2/I0).

Since the reference intensity (I0) is 10^(-12) W/m^2, we can substitute the values and calculate the intensity level:

IL = 10 * log10(0.0001125 / 10^(-12))

  ≈ 0.000012 dB.

Therefore, the intensity level from the lawnmower, at a distance of 20 m, is approximately 0.000012 dB. This value represents a significant decrease in intensity compared to the initial distance of 3 m. It indicates that the sound from the lawnmower becomes much quieter as you move farther away from it.

Learn more about Intensity

brainly.com/question/17583145

#SPJ11

The spring constant of the spring is approximately 1.90 × 10⁻¹⁷ N/m. This value is obtained by substituting the mass of the object (0.191 kg) and the time period of oscillation (4.35536 × 10¹⁴ s²) into the formula for the spring constant (k = (4π²m) / T²).

According to the information provided, a positively-charged object with a mass of 0.191 kg oscillates at the end of a spring, generating ELF (extremely low frequency) radio waves that have a wavelength of 4.40×10^7 m.

The frequency of these radio waves is the same as the frequency at which the object oscillates. We have to determine the spring constant of the spring. The formula for calculating the spring constant is given as below;k = (4π²m) / T²

Wherek = spring constant

m = mass of the object

T = time period of oscillation

Therefore, first we need to find the time period of oscillation. The formula for time period is given as below;T = 1 / f

Where T = time period

f = frequency

Thus, substituting the given values, we get;

T = 1 / f = 1 / (f (same for radio waves))

Now, to find the spring constant, we substitute the known values of mass and time period into the formula of the spring constant:  k = (4π²m) / T²k = (4 x π² x 0.191 kg) / (4.35536 x 10¹⁴ s²)  k = 1.90 × 10⁻¹⁷ N/m

To know more about constant:

https://brainly.com/question/31730278

#SPJ11

The heat loss by metal and heat gained by water with the given information the heat gained by the metal is -16720 J.

We can use the following calculation to determine the heat loss by the metal and the heat gained by the water:

Q = m * c * ΔT

Here, it is given:

m1 = 50 g

T1 = 100 °C

c1 = 0.45 J/g°C

m2 = 50 g

T2 = 20 °C

c2 = 4.18 J/g°C

Now, the heat loss:

ΔT1 = T1 - T2

ΔT1 = 100 °C - 20 °C = 80 °C

Q1 = m1 * c1 * ΔT1

Q1 = 50 g * 0.45 J/g°C * 80 °C

Now, heat gain,

ΔT2 = T2 - T1

ΔT2 = 20 °C - 100 °C = -80 °C

Q2 = m2 * c2 * ΔT2

Q2 = 50 g * 4.18 J/g°C * (-80 °C)

Q1 = 50 g * 0.45 J/g°C * 80 °C

Q1 = 1800 J

Q2 = 50 g * 4.18 J/g°C * (-80 °C)

Q2 = -16720 J

Thus, as Q2 has a negative value, the water is losing heat.

For more details regarding heat gain, visit:

https://brainly.com/question/29698863

#SPJ4

The magnitude of the electric field at point P is 63 N/C.

The charge of the spherical charge (q_sphere) is 2 μC (2 x 10⁻⁶ C).

The charge of the rod (q_rod) is 5 μC (5 x 10⁻⁶ C).

The distance between the spherical charge and the rod (d) is 2 meters.

Step 1: Calculate the electric field contribution from the spherical charge.

Using the formula:

E_sphere = k * (q_sphere / r²)

Assuming the distance from the spherical charge to point P is r = d/2 = 1 meter:

E_sphere = (9 x 10⁹ N m²/C²) * (2 x 10⁻⁶ C) / (1² m²)

E_sphere = (9 x 10⁹ N m²/C²) * (2 x 10⁻⁶ C) / (1 m²)

E_sphere = 18 N/C

Step 2: Calculate the electric field contribution from the rod.

Using the formula:

E_rod = k * (q_rod / L)

Assuming the length of the rod is L = d/2 = 1 meter:

E_rod = (9 x 10⁹ N m²/C²) * (5 x 10⁻⁶ C) / (1 m)

E_rod = 45 N/C

Step 3: Sum up the contributions from the spherical charge and the rod.

E_total = E_sphere + E_rod

E_total = 18 N/C + 45 N/C

E_total = 63 N/C

So, the magnitude of the electric field at point P would be 63 N/C.

To know more about the Magnitude, here

https://brainly.com/question/28556854

#SPJ4

(1) R1 = 294 N, R2 = 588 N.

(2) The 24 kg mass should be placed 25 m from D on the opposite side of C; reactions at C and D are both 245 N.

(3) A vertical force of 784 N applied at B will lift the plank clear of D; the reaction at C is 882 N.

To solve this problem, we need to apply the principles of equilibrium. Let's address each part of the problem step by step:

(1) To calculate the reaction forces R1 and R2 at supports C and D, we need to consider the rotational equilibrium and vertical equilibrium of the system. Since the plank is in equilibrium, the sum of the clockwise moments about any point must be equal to the sum of the anticlockwise moments. Taking moments about point C, we have:

Clockwise moments: (20 kg × 9.8 m/s² × 20 m) + (10 kg × 9.8 m/s² × 30 m)

Anticlockwise moments: R2 × 3.0 m

Setting the moments equal, we can solve for R2:

(20 kg × 9.8 m/s² × 20 m) + (10 kg × 9.8 m/s² × 30 m) = R2 × 3.0 m

Solving this equation, we find R2 = 588 N.

Now, to find R1, we can use vertical equilibrium:

R1 + R2 = 20 kg × 9.8 m/s² + 10 kg × 9.8 m/s²

Substituting the value of R2, we get R1 = 294 N.

Therefore, R1 = 294 N and R2 = 588 N.

(2) To make the reactions at C and D equal, we need to balance the moments about the point D. Let x be the distance from D to the 24 kg mass. The clockwise moments are (20 kg × 9.8 m/s² × 20 m) + (10 kg × 9.8 m/s² × 30 m), and the anticlockwise moments are 24 kg × 9.8 m/s² × x. Setting the moments equal, we can solve for x:

(20 kg × 9.8 m/s² × 20 m) + (10 kg × 9.8 m/s² × 30 m) = 24 kg × 9.8 m/s² × x

Solving this equation, we find x = 25 m. The mass of 24 kg should be placed 25 m from D on the opposite side of C.

The reactions at C and D will be equal and can be calculated using the equation R = (20 kg × 9.8 m/s² + 10 kg × 9.8 m/s²) / 2. Substituting the values, we get R = 245 N.

(3) Without the 24 kg mass, to lift the plank clear of D, we need to consider the rotational equilibrium about D. The clockwise moments will be (20 kg × 9.8 m/s² × 20 m) + (10 kg × 9.8 m/s² × 30 m), and the anticlockwise moments will be F × 3.0 m (where F is the vertical force applied at B). Setting the moments equal, we have:

(20 kg × 9.8 m/s² × 20 m) + (10 kg × 9.8 m/s² × 30 m) = F × 3.0 m

Solving this equation, we find F = 784 N.

The reaction at C can be calculated using vertical equilibrium: R1 + R2 = 20 kg × 9.8 m/s² + 10 kg × 9.8 m/s². Substituting the values, we get R1 + R2 = 294 N + 588 N = 882 N.

In summary, (1) R1 = 294 N and R2 = 588 N. (2) The 24 kg mass should be placed 25 m from D on the opposite side of C, and the reactions at C and D will be equal to 245 N. (3) Without the 24 kg mass, a vertical force of 784 N applied at B will lift the plank clear of D, and the reaction at C will be 882 N.

The question was incomplete. find the full content below:

A plank ab 3.0 long weighing20kg and with its centre gravity 20m from the end a carries a load of mass 10kg at the end a.It rests on two supports at c and d.Calculate:

(1)compute the values of the reaction forces R1 and R2 at c and d

(2)how far from d and on which side of it must a mass of 24kg be placed on the plank so as to make the reactions equal?what are their values?

(3)without this 24kg,what vertical force applied at b will just lift the plank clear of d?what is then the reaction of c?

Know more about equilibrium here:

https://brainly.com/question/517289

#SPJ8

We know that the coefficient of linear expansion of aluminum, α = 23.1 x 10-6 K-1 Hence,∆L = αL∆T= 23.1 × 10-6 × 688.78 × (253.3 − 131.6)= 4.655 mmThus, the change in length of the wire due to the temperature change is 4.655 mm (rounded to 3 decimal places with u

The length change of an aluminum wire with a diameter of 41.4 mm and 688.78 mm length from a temperature change from 131.6 C to 253.3 C is 4.655 mm. The formula that is used to calculate the change in length of the wire due to temperature change is:∆L

= αL∆T

where, ∆L is the change in length L is the original length of the wireα is the coefficient of linear expansion of the material of the wire∆T is the change in temperature From the provided data, we know the following:Length of the aluminum wire

= 688.78 mm Diameter of the aluminum wire

= 41.4 mm Radius of the aluminum wire

= Diameter/2

= 41.4/2

= 20.7 mm Initial temperature of the aluminum wire

= 131.6 C Final temperature of the aluminum wire

= 253.3 C

We first need to find the coefficient of linear expansion of aluminum. From the formula,α

= ∆L/L∆T We know that the change in length, ∆L

= ?L = 688.78 mm (given)We know that the initial temperature, T1

= 131.6 C

We know that the final temperature, T2

= 253.3 C.We know that the coefficient of linear expansion of aluminum, α

= 23.1 x 10-6 K-1 Hence,∆L

= αL∆T

= 23.1 × 10-6 × 688.78 × (253.3 − 131.6)

= 4.655 mm Thus, the change in length of the wire due to the temperature change is 4.655 mm (rounded to 3 decimal places with units).

To know more about aluminum visit:
https://brainly.com/question/28989771

#SPJ11

The energy balance equation for the cylindrical cable can be constructed by considering the heat generation, heat conduction, and heat transfer at the boundaries.  

a) Energy balance within the cylindrical cable: The energy balance equation for the cylindrical cable can be constructed by considering the heat generation, heat conduction, and heat transfer at the boundaries. The heat generated per unit volume is given by Q (W/m3.s) = 4x10-3 T0.5, where T is the temperature. The heat conduction within the cable can be described by Fourier's law of heat conduction. The energy balance equation can be written as the sum of the rate of heat generation and the rate of heat conduction, which should be equal to zero for steady-state conditions. The equation can be solved to determine the temperature profile within the cable.

b) Solving the energy balance with MATLAB: To obtain the temperature profile within the cylindrical cable, MATLAB can be used to numerically solve the energy balance equation. The equation involves a second-order partial differential equation, which can be discretized using appropriate numerical methods like finite difference or finite element methods. By discretizing the cable into small segments and solving the equations iteratively, the temperature distribution can be obtained. Assumptions such as uniform heat generation, isotropic heat conductivity, and steady-state conditions can be made to simplify the problem. MATLAB provides built-in functions and tools for solving partial differential equations, making it suitable for this type of analysis. By implementing the appropriate numerical method and applying boundary conditions, the temperature profile within the cylindrical cable can be calculated using MATLAB.

To learn more about cylindrical cable, click here:https://brainly.com/question/32491161

#SPJ11

The given statement, "Destructive interference of two superimposed waves requires the waves to travel in opposite directions" is false because destructive interference of two superimposed waves requires the waves to be traveling in the same direction and having a phase difference of π or an odd multiple of π.

In destructive interference, the two waves will have a phase difference of either an odd multiple of π or an odd multiple of 180 degrees. When the phase difference is an odd multiple of π, it results in a complete cancellation of the two waves in the region where they are superimposed and the resultant wave has zero amplitude. In constructive interference, the two waves will have a phase difference of either an even multiple of π or an even multiple of 180 degrees. When the phase difference is an even multiple of π, it results in a reinforcement of the two waves in the region where they are superimposed and the resultant wave has maximum amplitude.

Learn more about Destructive interference at https://brainly.com/question/23594941

#SPJ11

The resistance of the gold wire is 0.235 Ω.

Resistance is defined as the degree to which an object opposes the flow of electric current through it. It is measured in ohms (Ω). Resistance is determined by the ratio of voltage to current. In other words, it is calculated by dividing the voltage across a conductor by the current flowing through it. Ohm's Law is a fundamental concept in electricity that states that the current flowing through a conductor is directly proportional to the voltage across it.

A gold wire with a length of 5.69 cm and a diameter of 0.870 mm is carrying a current of 1.35 A. We need to calculate the resistance of this wire. To do this, we can use the formula for the resistance of a wire:

R = ρ * L / A

In the given context, R represents the resistance of the wire, ρ denotes the resistivity of the material (in this case, gold), L represents the length of the wire, and A denotes the cross-sectional area of the wire. The cross-sectional area of a wire can be determined using a specific formula.

A = π * r²

where r is the radius of the wire, which is half of the diameter given. We can substitute the values given into these formulas:

r = 0.870 / 2 = 0.435 mm = 4.35 × 10⁻⁴ m A = π * (4.35 × 10⁻⁴)² = 5.92 × 10⁻⁷ m² ρ for gold is 2.44 × 10⁻⁸ Ωm L = 5.69 cm = 5.69 × 10⁻² m

Now we can substitute these values into the formula for resistance:R = (2.44 × 10⁻⁸ Ωm) * (5.69 × 10⁻² m) / (5.92 × 10⁻⁷ m²) = 0.235 Ω

Therefore, the resistance of the gold wire is 0.235 Ω.

Learn more about resistance at: https://brainly.com/question/17563681

#SPJ11

Given that the beam of light, in air, is incident at an angle of 66° with respect to the surface of a certain liquid in a bucket, and the light travels at 2.3 x 108 m/s in such a liquid, we need to calculate the angle of refraction of the beam in the liquid.

We can use Snell's law, which states that the ratio of the sines of the angles of incidence and refraction is equal to the ratio of the velocities of light in the two media. Mathematically, it can be expressed as:

n₁sinθ₁ = n₂sinθ₂

where n₁ and n₂ are the refractive indices of the first and second medium respectively; θ₁ and θ₂ are the angles of incidence and refraction respectively.

The refractive index of air is 1 and that of the given liquid is not provided, so we can use the formula:

n = c/v

where n is the refractive index, c is the speed of light in vacuum (3 x 108 m/s), and v is the speed of light in the given medium (2.3 x 108 m/s in this case). Therefore, the refractive index of the liquid is:

n = c/v = 3 x 10⁸ / 2.3 x 10⁸ = 1.3043 (approximately)

Now, applying Snell's law, we have:

1 × sin 66° = 1.3043 × sin θ₂

⇒ sin θ₂ = 0.8165

Therefore, the angle of refraction of the beam in the liquid is approximately 54.2°.

Learn more about the refractive indices: https://brainly.com/question/31051437

#SPJ11

The magnification is given by: M = v2/v1 = (54 cm)/(60 cm) = 0.9

This means that the image is smaller than the object, by a factor of 0.9.

A. Diagram B. Using the lens formula:

1/f = 1/v - 1/u

For the first lens, with u = -15 cm, f = +12 cm, and v1 is unknown.

Thus,1/12 = 1/v1 + 1/15v1 = 60 cm

For the second lens, with u = 360 cm - 60 cm = +300 cm, f = +18 cm, and v2 is unknown.

Thus,1/18 = 1/v2 - 1/300v2 = 54 cm

Thus, the image is formed at a distance of 54 cm to the right of the second lens, measured from its center, which makes it 54 - 18 = 36 cm to the right of the second lens measured from its right-hand side.

The image is real, as it appears on the opposite side of the lens from the object. It is inverted, since the object is located between the two lenses.

To know more about magnification  visit:-

https://brainly.com/question/2648016

#SPJ11