Answer:
Sense the current leakage
Trip the circuit
Cut off the electricity
Explanation:
The correct order is -
Sense the current leakage
Trip the circuit
Cut off the electricity
Reason -
First step has to be taken to sense the electric current leakage without it being detected, it cant be dealt with.
The second step consists of tripping the circuit so at to remove the flow of electricity.
The third step is to Cut the electricity off so to stop the leakage and be safe.
Assuming the vertical sensitivity control is set to 0.5 volts per division, and the timebase control is set to 2.5 ms per division, calculate the amplitude of this sine wave in volts peak
Answer:
Amplitude of sine wave in volts peak = 2.25 V
Explanation:
Given:
Vertical sensitivity control = 0.5 volts per division
Time base control = 2.5 ms per division
Find:
Amplitude of sine wave in volts peak
Computation:
Amplitude of sine wave in volts peak = 4¹/₂[volts per division]
Amplitude of sine wave in volts peak = 4¹/₂[0.5]
Amplitude of sine wave in volts peak = 4.5[0.5]
Amplitude of sine wave in volts peak = 2.25 V
What reading will a digital multimeter indicate, when set to the 4A scale, if the actual current flow is 200mA?0.002 A
0.020 A
0.200 A
2.000 A
Answer:
Current flow in ampere according to 4A scale = 0.2 Ampere
Explanation:
Given;
Current flow = 200 milliampere
Find:
Current flow in ampere according to 4A scale
Computation:
We know that
1 ampere = 1,000 milliampere
So,
1 milliampere = 1/1,000 ampere
Current flow = 200 milliampere
Current flow = 200[1/1,000]
Current flow = 200[0.001]
Current flow = 0.2
Current flow in ampere according to 4A scale = 0.2 Ampere
define the branches of engineering with work field?
In broad terms, engineering can be divided into four main categories – chemical, civil, electrical and mechanical engineering
Question 150 (1 point)
The only difference between an isometric drawing and an isometric projection is the
O terminology
representation
Size
both a and 6
(0)
none of the above
Previous Page
Next Page
Answer:
terminology
is the right answer
hope this is helpful
Which of the following factors put you at risk for injury?
Select the 3 answer options that apply.
Repetitive motions
Prolonged exposure to vibration
Long periods of localized pressure
Neutral postures
Answer:
repetitive motion prolonged exposure long periods of pressure
28. What is the value of a resistor in a series circuit if you measure 0.5 amps flowing through it and 15 volts
across it?
29
A lightbulb using 120 V and 1 A is using how many watts?
hing
tarm with the correct definition