Answer:
the answer is b........
I'm having trouble balancing these. Can you help me
Answer:
Oh Okay
I hope u have a better rest of ur day
2Mg + O2 → 2Mgo
What is the greatest amount of MgO (in moles) that can be made with 7.8 moles of Mg and 4.7
moles of O,? Which is the limiting reactant? Which reactant is in excess, and how many moles
of it are left over?
Answer:
it would be 4.5 mole left over
Explanation:
The greatest amount of MgO will be 7.8 mole and Mg will be limiting reagent.
What is limiting reagent?The substance that would be entirely absorbed in the end of the chemical process is called as the limiting reagent.
What is mole?A mole would be defined as the quantity of a material that includes precisely 6.02214076 X [tex]10^{23}[/tex] of the particular chemical elementary entities.
Calculation of amount of MgO
The balanced chemical equation is 2 Mg + [tex]O_{2}[/tex] → 2MgO
It can be seen that 2 mole of Mg reacts with 1 mole of oxygen.
So, 7.8 mole of Mg = 7.8 / 2 = 3.9 mole of [tex]O_{2}[/tex].
Since, [tex]O_{2}[/tex] will be added in given reaction vessel will be 4.7 moles.
So, (4.7 - 3.9) = 0.8 moles of [tex]O_{2}[/tex] left but in this case Mg will be finished. Therefore, Mg will be limiting reagent.
It can be understood that 2 moles of Mg will give 2 mole of MgO.
That's why , 7.8 moles of Mg = 2 × 7.8 / 2 = 7.8 moles of MgO.
Therefore, 7.8 mole of magnesium oxide (MgO) could be generated and Mg will be limiting reagent.
To know more about limiting reagent
https://brainly.com/question/11848702
#SPJ2
How
many moles of hydrogen gas will form if 0.35 moles of Na reacts with an
excess of water?
Answer:
0.8 moles
Explanation:
2H2+O2 —›2H2O
Since , from given balanced chemical Equation.
2moles of H2 produce 2 moles of Water
So,
2moles H2= 2moles H2O
1moles H2= 1 mole of H2O
For 0.8 mole of H2O, multiply both sides by 0.8
0.8 H2=0.8 H2O
0.8 mole of H2= 0.8 mole H2O
So answer is 0.8 moles
A flat plain of cooled lava is created by
Balance the following chemical equation:
i need F
Answer:
L2 add a for NAL add a 2 then for the first NA2 put a 4 and then the second NA2 put a 2 and it should be good
Explanation:
Electrons, protons and which other sub-atomic particle were discovered in the 19th and early 20th century?
Answer: The electron, discovered in 1897 by J. J. Thomson, was the first subatomic particle to be observed. The nucleus of ordinary hydrogen was understood to be a single proton after the nucleus of the atom was discovered in 1911 by Ernest Rutherford. In 1932, a neutron was detected.
What is the rate of acceleration caused by gravity?
Answer:
The numerical value for the acceleration of gravity is most accurately known as 9.8 m/s/s.
I really need help I'm not good with science
Answer:
A!!!!!!!!
Explanation:
Which statement describes the Richter scale?
A. It cannot account for fault movement during an earthquake.
B. It measures large earthquakes far from the seismograph.
C. It estimates the total energy released from an earthquake.
D. It increases in magnitude as amount of damage increases.
Answer:
D. It increases in magnitude as amount of damage increases.
Explanation:
I took the test and chose A got it wrong and it said it was D
Answer:
D
Explanation:
two difference between simple cell and dry cell
Explanation:
Simple cell has liquid chemicals and it is difficult to carry from one place to another. Dry cell has no solution. So, it is easier to carry it from one place to another and there is no risk of spilling acid from the dry cell.
What two ways you can increase the frictional force between two objects?
( 8th grade )
Frictional force between two objects can be increased by:
i) making the surfaces rough
ii) increasing the mass of the object that ks moving.
Hope it helps you.
How many grams of oxygen are in 4.50x10^25 formula units of potassium sulfate?
Potassium Sulfate = K2SO4 = 174.252 g/mol
K2 = 78.196 g/mol
S = 32.06 g/mol
O4 = 63.996 g/mol
Answer:
4777.09grams
Explanation:
To find the mass of oxygen, we first need to find the mass of potassium sulfate (K2SO4).
Since there are 4.50 x 10^25 formula units of potassium sulfate, we can find the number of moles in K2SO4 by dividing by Avagadros number (6.02 × 10^23 units). That is;
number of moles of K2SO4 (n) = 4.50 x 10^25 ÷ 6.02 × 10^23
= 0.747 × 10^ (25-23)
= 0.747 × 10^2
= 7.47 × 10^1 moles
Mass in grams of K2SO4 can be calculated thus: molar mass of K2SO4 × moles
= 174.252 g/mol × 7.47 × 10^1 moles
= 13016.62grams.
Since mass of oxygen in 1 mol of K2SO4 = O4 = 63.996 g/mol
We find the percentage by mass of oxygen in K2SO4 as follows:
= 63.996/174.252 × 100
= 0.367 × 100
= 36.7% by mass of oxygen.
This means that in 1gram of K2SO4, there are 0.367gram of Oxygen. Hence, in 13016.62grams (4.50 x 10^25 units) of K2SO4, there will be;
0.367 × 13016.62
= 4777.09grams of oxygen.
22. A student carefully measures a certain quantity of four different substances
into trays that will be used in a laboratory exercise. Which of these trays would
contain the largest number of atoms?
Sample
Mass of tray
with sample
Water
Mass of
empty tray
37.86g
36.59g
37.418
55.88g
Table Salt (NaCl)
Copper Wire
95.03g
100.96g
245.20g
Lead Shot
38.08g
Answer:
Water
Explanation:
The substance that has the highest number of moles also has the highest number of atoms.
The number of atoms of a substance can be calculated using the Avogadro's number. This number gives the number of elementary entities such as atoms, molecules and ions in one mole of a substance.
All you need to do is to find out which substance has the highest number of moles. This substance will also have the highest number of atoms present.
Learn more about Avogadro's number: https://brainly.com/question/1445383
Rusting of nail are chemical change or physical change and say why
Answer:
Explanation:
‘it’s a chemical change because this may seem like a decomposition reaction because it seems like the nail is decomposing and falling apart.
Answer:
the rusting of iron is a chemical change because it is two substance reacting together to make a new substance.
Explanation:
Substances that are good conductors of heat and electricity at room temperature usually
have delocalized electrons moving freely from atom to atom. Which type of bonding
occurs in these substances?
O covalent
electric
ionic
metallic
ASAP PLEASEE
Answer:
the answer is electric
Explanation:
i think so
Question 3 of 10
How does air pressure affect the boiling point of a liquid?
A. Air pressure lowers the temperature of the liquid molecules.
B. Air pressure keeps liquid molecules from escaping as a gas.
c. Air pressure decreases the kinetic energy of the liquid molecules.
D. Air pressure prevents diffusion from happening in a gas.
SUBMIT
Air pressure keeps liquid molecules from escaping as a gas, affect the boiling point of a liquid. Therefore, option B is correct.
Why does the boiling point decrease as air pressure decreases?A liquid's boiling point changes depending on the pressure being applied; the normal boiling point is the temperature at which the vapour pressure is equal to the average atmospheric pressure at sea level (760 mm [29.92 inches] of mercury). Water boils at sea level at 100° C (212° F).
The boiling point of a liquid is influenced by the pressure of gas above it. This is referred to as atmospheric pressure in an open system. The higher the boiling point and the more energy is needed to bring liquids to a boil, the higher the pressure.
Thus, option B is correct.
To learn more about the boiling point, follow the link;
https://brainly.com/question/2153588
#SPJ1
Mass of the Graduated Cylinder
(only air)(g) Mass of the Graduated Cylinder with
Water (g) Calculated Mass of Water (g)
73.7 73.7 0.0
A student collected the above data for this experiment. What error did he make? Explain.
Answer:
If there is water in the graduated cylinder and what is required is the exact amount of water, then the instrument used to measure the mass is not that accurate. Having only one decimal place is not enough to detect the mass of water in the cylinder.
Explanation:
Initially, the chalk had a mass of 323.5 grams but upon completion, its mass had dropped to 301.2 grams. What is the change in mass?
how do I balance these
Ahh, help me I don’t know what to pick
Answer:
for what? is there supposed to be a picture?
Explanation:
??
HELP ASAP!!!!!!!
Nieko purchases a box of granola cereal that has a mass of 0.312 kg. When he gets
home, he sorts the cereal into groups: oats, raisins, and nuts. Next, he measures the
mass of each group. What will Nieko find when he adds together the mass of each
group?
Answer:
girlll we got da same question we need help
Nieko purchases a box of granola cereal that has a mass of 0.312 kg, then according to law of conservation of mass, the mass of each group is 0.312 kg.
What is law of conservation of mass?According to law of conservation of mass the mass in isolated system can neither be created nor destroyed by chemical reaction and physical transformation but it transfer from one form to another.
When wood burn the mass of soot, gases and ashes is equal to the original mass of charcoal and the oxygen when it first created is one of the best example of law of conservation of mass.
Thus, Nieko purchases a box of granola cereal that has a mass of 0.312 kg, then according to law of conservation of mass, the mass of each group is 0.312 kg.
To learn more about law of conservation of mass, refer to the link below:
https://brainly.com/question/13383562
#SPJ5
4 Al + 3 O2 -> 2 Al2O3 How much aluminum would be needed to completely react with 45 grams of Oz?
Answer:
50.6g Al would be needed
Explanation:
Based on the reaction:
4Al + 3O₂ → 2Al₂O₃
4 moles of aluminium react with 3 moles of oxygen to produce 2 moles of Al₂O₃
To solve this question we need to find the moles of 45g of O₂. Then using the chemical equation find the moles of Al and its mass:
Moles O₂ -Molar mass: 32g/mol-:
45g O₂ * (1mol / 32g) = 1.41 moles O₂
Moles Al:
1.41 moles O₂ * (4mol Al / 3mol O₂) = 1.875 moles Al
Mass Al -Molar mass: 26.98g/mol-:
1.875 moles Al * (26.98g / mol) =
50.6g Al would be needed
The amount of aluminum that would be required to completely react with 45 grams of O2 would be 50.59 grams.
From the balanced equation of the reaction:
[tex]4 Al + 3 O_2 ---> 2 Al_2O_3[/tex]
The mole ratio of Al to O2 is 4:3.
Mole of 45 grams of O2 = mass/molar mass
= 45/32
= 1.4063 moles
Equivalent mole of Al: 4 x 1.4063/3
= 1.875 moles
mass of Al = mole x molar mass
= 1.875 x 26.98
= 50.59 grams
More on stoichiometry calculations can be found here: https://brainly.com/question/22288091?referrer=searchResults
Which gas is given out during burning process
Answer:
Carbon dioxide
I hope it helps
#captainpower
pls make me brainliest
what is the percent of just the oreo(out of 100%) from the total mass of these 3 cookies combined
Answer:
Percent mass of oreo = 35.11%
Explanation:
Given:
Mass of oreo = 17.1
Mass of 1st cookie = 16.2
Mass of 3rd cookie = 15.4
Find:
Percent mass of oreo
Computation:
Total mass = Mass of oreo + Mass of 1st cookie + Mass of 3rd cookie
Total mass = 17.1 + 16.2 + 15.4
Total mass = 48.7
Percent mass of oreo = [Mass of oreo/Total mass]100
Percent mass of oreo = [17.1 / 48.7]100
Percent mass of oreo = 35.11%
Write a net ionic equation for the neutralization reaction of acid with a hydroxide base. (Include phase symbols)
Answer:
salt + water. It is called the ionic equation for neutralisation. the acid to form a salt solution.
Explanation:
So what you end up with is you always end up H+ plus OH- yields H2O, because HCl, and NaOH, since they're strong, they fully dissociate. So the Na+, and the Cl - are spectator ions. So with a strong acid and strong base, the net ion equation is always H+ plus OH- yields H2O.
Explain how Newton's idea about inertia has helped in astronomy?
o We can learn that objects in space like asteroid will keep its path unless a different force is applied to it
The Law of Inertia will help us discover distant galaxies
Inertia is used to help identify distance planets.
o We can figure out the size of far away planet through the Law of Inertia.
NEXT QUESTION
ASK FOR HELP
Answer:
the answer is A because when something is going straight it wont change unless its acted upon by a force
Explanation:
Describe how the calcium atom and the oxygen atop form calcium oxide
Explanation: Formula and structure: Calcium oxide chemical formula is CaO and its molar mass in 56.0774 g mol-1. The molecule is formed by the calcium cation Ca+2 and the oxygen anion O-2, which form a ionic bond. The calcium oxide ionic lattice is cubic and similar to NaCl lattice, with an ion surrounded by 6 opposite charge-ion.
Does transfer RNA perform its function in the nucleus or cytoplasm? Explain.
Answer:
Explanation:
Although tRNAs participate in the essential function of protein translation in the cytoplasm, tRNA transcription and numerous processing steps occur in the nucleus.
Transfer RNA carries amino acids to the ribosome and adds them to the growing protein, copies the coded message from the DNA in the nucleus and carries the message to the ribosome in the cytoplasm.
A small amount of liquid bromine is added to a container which is then sealed.
Br2 (l) " Br2 (g)
35. 124.31 g of silver nitrate reacts with 52.89 g of sodium chloride.
g
a. What is the mass of the products?
Answer: Thus mass of products is 177.2 g
Explanation:
According to the law of conservation of mass, mass can neither be created nor be destroyed. Thus the mass of products has to be equal to the mass of reactants. The number of atoms of each element has to be same on reactant and product side. Thus chemical equations are balanced.
The balanced chemical reaction is:
[tex]AgNO_3+NaCl\rightarrow NaNO_3+AgCl[/tex]
mass of silver nitrate [tex](AgNO_3)[/tex] = 124.31 g
mass of sodium chloride [tex](NaCl)[/tex] = 52.89 g
mass of reactants = mass of silver nitrate [tex](AgNO_3)[/tex] +
mass of sodium chloride [tex](NaCl)[/tex] = 124.31 g + 52.89 g = 177.2 g
Thus mass of products = mass of reactants = 177.2 g