ii. Which of these has a heating element with a low melting point?
a, electric bell
c. electric iron
b. fuse
d. all of these

Answers

Answer 1
The answer is Fuse, the Fuse has a low melting point
Answer 2
Letter B (Fuse) is the answer

Related Questions

The Doppler technique for planet detection has found Earth-like planets around nearby Sun-like stars. (True or False) ____________________

Answers

Answer: false

Explanation:

why does the earth get more energy from the sun than from all the other stars in the universe combined

Answers

Answer:

Explanation:

The sun is much closer than the other stars

Two students are sitting on a see-saw. The length of the board is 2 meters with the
pivot point being in the very center. One student sitting on the end of the left side
has a mass of 34 kg. If the student sitting on the right has a mass of 42.5 kg, where
should she sit for the see-saw to be in equilibrium?

Answers

To solve the problem it is necessary to apply the concepts of Torque and equilibrium.

The Torque is defined as:

Where

F= Force

d = Distance

In this particular case, the force is caused by the weight of both children.

In turn, when there is equilibrium, the two torques must be equal therefore

Replacing with our values

Re-arrange to find  

Therefore the distance that the second kid should sit to balance the see-saw is 1.8m from the pivot.

During which time does Jamal have the greatest momentum?

Answers

Answer:

Momentum Packet Answer KEY - Science Online

YOU WILL SEE THE PDF

what is the energy (in j) of a photon required to excite an electron from n = 2 to n = 8 in a he⁺ ion? submit an answer to three signficant figures.

Answers

Answer:

Approximately [tex]5.11 \times 10^{-19}\; {\rm J}[/tex].

Explanation:

Since the result needs to be accurate to three significant figures, keep at least four significant figures in the calculations.

Look up the Rydberg constant for hydrogen: [tex]R_{\text{H}} \approx 1.0968\times 10^{7}\; {\rm m^{-1}[/tex].

Look up the speed of light in vacuum: [tex]c \approx 2.9979 \times 10^{8}\; {\rm m \cdot s^{-1}}[/tex].

Look up Planck's constant: [tex]h \approx 6.6261 \times 10^{-34}\; {\rm J \cdot s}[/tex].

Apply the Rydberg formula to find the wavelength [tex]\lambda[/tex] (in vacuum) of the photon in question:

[tex]\begin{aligned}\frac{1}{\lambda} &= R_{\text{H}} \, \left(\frac{1}{{n_{1}}^{2}} - \frac{1}{{n_{2}}^{2}}\right)\end{aligned}[/tex].

The frequency of that photon would be:

[tex]\begin{aligned}f &= \frac{c}{\lambda}\end{aligned}[/tex].

Combine this expression with the Rydberg formula to find the frequency of this photon:

[tex]\begin{aligned}f &= \frac{c}{\lambda} \\ &= c\, \left(\frac{1}{\lambda}\right) \\ &= c\, \left(R_{\text{H}}\, \left(\frac{1}{{n_{1}}^{2}} - \frac{1}{{n_{2}}^{2}}\right)\right) \\ &\approx (2.9979 \times 10^{8}\; {\rm m \cdot s^{-1}}) \\ &\quad \times (1.0968 \times 10^{7}\; {\rm m^{-1}}) \times \left(\frac{1}{2^{2}} - \frac{1}{8^{2}}\right)\\ &\approx 7.7065 \times 10^{14}\; {\rm s^{-1}} \end{aligned}[/tex].

Apply the Einstein-Planck equation to find the energy of this photon:

[tex]\begin{aligned}E &= h\, f \\ &\approx (6.6261 \times 10^{-34}\; {\rm J \cdot s}) \times (7.7065 \times 10^{14}\; {\rm s^{-1}) \\ &\approx 5.11 \times 10^{-19}\; {\rm J}\end{aligned}[/tex].

(Rounded to three significant figures.)

Look at the diagram of two trains. Calculate the relative speed.

Answers

Answer:speed difference

Explanation:

0. Kedija walked 300m from A to B and returned back and walked 200m and then stopped at 'C', what
is her change in position from A to in the figure below
300m
200m
A
С
B
C/-500m
D 100m
B/ -100m
A Soom

Answers

Answer:

100

Explanation:

Displacement is the shortest line between the starting point and the ending point

so , the starting point is "A"

,the ending point is "C"

so "AC" = AB - CB = 300 - 200 = "100"

In an inelastic collision:

I. only momentum is conserved

II. only kinetic energy is conserved

III. momentum and kinetic energy are both conserved.

IV. neither momentum nor kinetic energy are conserved.

Answers

Hi there!

I. Only momentum is conserved.

An inelastic collision means that there is a LOSS in the KINETIC ENERGY of the system.

However, momentum is ALWAYS conserved for every type of collision unless there is an external force acting on the system.

I think it’s I.
Hope this will help.

Define the following:
Potential energy
Kinetic energy
Mechanical energy
Chemical energy
Sound energy
Light energy
Nuclear energy

Answers

Define the following:
Potential energy: In physics, potential energy is the energy held by an object because of its position relative to other objects, stresses within itself, its electric charge, or other factors.
Kinetic energy: In physics, the kinetic energy of an object is the energy that it possesses due to its motion. It is defined as the work needed to accelerate a body of a given mass from rest to its stated velocity. Having gained this energy during its acceleration, the body maintains this kinetic energy unless its speed changes.
Mechanical energy:
Chemical energy: chemical energy, Energy stored in the bonds of chemical compounds. Chemical energy may be released during a chemical reaction, often in the form of heat; such reactions are called exothermic. Reactions that require an input of heat to proceed may store some of that energy as chemical energy in newly formed bonds
Sound energy: In physics, sound energy is a form of energy that can be heard by living things. Only those waves that have a frequency of 16 Hz to 20 kHz are audible to humans. However, this range is an average and will slightly change from individual to individual.
Light energy: Light energy is a kind of kinetic energy with the ability to make types of light visible to human eyes. Light is defined as a form of electromagnetic radiation emitted by hot objects like lasers, bulbs, and the sun. Light contains photons which are minute packets of energy.
Nuclear energy: Nuclear power is the use of nuclear reactions to produce electricity. Nuclear power can be obtained from nuclear fission, nuclear decay and nuclear fusion reactions. Presently, the vast majority of electricity from nuclear power is produced by nuclear fission of uranium and plutonium in nuclear power plants

Answer

potential energy is the energy that is stored in an object due to its position relative to some zero position. An object possesses gravitational potential energy if it is positioned at a height above (or below) the zero height.

Kinetic energy is a form of energy that an object or a particle has by reason of its motion. ... Kinetic energy is a property of a moving object or particle and depends not only on its motion but also on its mass.

The energy of an object due to its motion or position; the sum of an object's kinetic energy and potential energy is called mechanical energy.

Energy stored in the bonds of chemical compounds. Chemical energy may be released during a chemical reaction, often in the form of heat; such reactions are called exothermic

Sound energy is defined as the movement of vibrations through matter. Sound energy is produced when an object vibrates, which results in noise. The sound vibrations cause waves of pressure that travel through a medium, such as air, water, wood, or metal.

Light energy is a kind of kinetic energy with the ability to make types of light visible to human eyes. Light is defined as a form of electromagnetic radiation emitted by hot objects like lasers, bulbs, and the sun. Light contains photons which are minute packets of energy.

Nuclear energy is energy in the nucleus (core) of an atom. ... It can be released from atoms in two ways: nuclear fusion and nuclear fission. In nuclear fusion, energy is released when atoms are combined or fused together to form a larger atom. This is how the sun produces energy.

I need it in the next hour or so!

A sports car with a mass of 650 kg is accelerating at +3 m/s2. The force of friction is 200 N, the forward force from the engine is 3100 N. What must the force of air resistance on the car be? - Show your work - Include a unit with your answer​

Answers

The car is accelerating at 3 m/s² in the positive direction (to the right). By Newton's second law, the net force on the car in this direction is

∑ F = F[a] - F[f] - F[air] = ma

3100 N - 200 N - F[air] = (650 kg) (3 m/s²)

Solve for F[air] :

F[air] = 3100 N - 200 N - (650 kg) (3 m/s²)

F[air] = 3100 N - 200 N - 1950 N

F[air] = 950 N

If the mass of a substance having its volume 80 cm is 68 g. Calculate the density of the substance​

Answers

[tex]\text{Given that,}\\\\\text{Mass}~ m = 68 ~\text{g} = 68 \times 10^{-3}~ \text{kg}\\\\\text{Volume}~ V = 80 ~ \text{cm}^3 = 80 \times 10^{-6}~ \text{m}^3 = 8\times 10^{-5}~ \text{m}^3\\\\\\\text{Density} ~\rho = \dfrac mV = \dfrac{68\times 10^{-3}}{8 \times 10^{-5}} = 8.5 \times 10^2 = 850 ~ \text{kg}~\text{m}^{-3}[/tex]

Draw a nitrogen cycle and explain in short.
please help me ​

Answers

Answer:   biogeochemical process

Explanation:

An instrument made of brass is an example of which of these?

solid–liquid solution

solid solution

liquid–liquid solution

gas–liquid solution

Answers

Answer:

a solid made of liquid solution

Explanation:

a trumpet for example has intrcuite valves , the only way to do this is by creating a liquid form of the metal to be able to create the solid formed instrument.

Answer:

a solid made of liquid solution

Explanation:

domne

how long does it take a man to travel 6 km if his speed is 3km/h?

Answers

why did my answer get deleted??

oh yeah i put a link on there- oopsies.

I wont this time!

I got 30!

What happens to all light bulbs in a series circuit when one burns out? How would the situation change when the lights are hooked up in parallel?

Answers

In a series circuit if one light bulb burns out then all of the light bulb would burn out. In a parallel the light bulbs are put in their own pathways so if one burns out the others won't

Please HELP
6. A 3.4-kg bucket of water is attached to a 1.0-m rope. The bucket is swung in a circle at a speed
of 10.0-m/s.


a.
If the rope can only tolerate 400-N of force, what is the maximum speed the bucket can
experience before the rope snaps? {Hint: Let the centripetal force be 400-N and solve for the speed)

Answers

Answer:

Explanation:

hope this helps

The maximum speed of the bucket can experience before the rope snaps if A 3.4-kg bucket of water is attached to a 1.0-m rope. The bucket is swung in a circle at a speed of 10.0-m/s is 10.85 m / s.

What is force?

Force is the influence of either pull or pushes in the body. Basically, gravitation forces, nuclear forces, and friction forces are the types of forces. For e.g. when the wall is hit by a hand then a force is exerted by the hand on the wall as well as the wall also exerts a force on the hand. There are different laws given to Newton to understand force.

Newton is a unit of force used by physicists that is part of the International System (SI). The force required to move a body weighing one kilogram one meter per second is known as a newton.

Given:

The mass of the bucket, m = 3.4 kg,

The length of the rope, r = 1 m,

The speed of the bucket, v = 10 m / s,

The force of the rope, F = 400 N,

Calculate the maximum speed by the formula given below,

[tex]F_c = mv^2 / r[/tex]

400 = 3.4 v² / 1

v² = 400 / 3.4

v² = 117.6

v = 10.85 m / s

Therefore, the maximum speed of the bucket can experience before the rope snaps if A 3.4-kg bucket of water is attached to a 1.0-m rope. The bucket is swung in a circle at a speed of 10.0-m/s is 10.85 m / s.

To know more about Force:

https://brainly.com/question/13191643

#SPJ2

PLZ HELP ME FAST A relationship between two variables is called:
A.
observable
.B.
correlation
.C.
causation
D.
finite.

Answers

Answer:

B- Correlation

Explanation:

Answer:

correlation

Explanation:

A wave has wavelength of 10 m and a speed of 340 m/s. What is the frequency of the wave?
I need the Formula,Known,Substitute & Solve Answer with Units

Answers

Answer:

This is the answer that I got.

Explanation:

Hope it is right.

a swimmer experiences a total (absolute) pressure of 117,500 pa in a pool. how far below the surface are they located?

Answers

Answer:

Explanation:

We know that the pressure can be calculated in the following way:

p = d·g·h

with d being the density of the water, g the gravitational acceleration and h the depth.

Also d of the water = 1000 kg/m^3 circa and g = 9.8 m/s^2 circa

117,500 Pa = 1000kg/m³ · 9.8m/s² · h

Therefore h = 11,9 m

Before Collision:
2,000 kg 4 m/s 4,000kg 0 m/s

After collision: 2,000 kg + 4,000kg Vt = ?

I will give Brainliest to the first person. Please show work

Answers

Answer:

  4/3 m/s

Explanation:

Assuming momentum is conserved, the sum of products of mass and speed before the collision is the same as after:

  (2000 kg)(4 m/s) +(4000 kg)(0 m/s) = (2000 +4000 kg)(Vt)

  Vt = (8000 kg·m/s)/(6000 kg) = 4/3 m/s

The speed of the combined objects after the collision is 4/3 m/s.

When the mass of the cylinder increased from 3. 0 kg to 6. 0 kg, what happened to the amount of heat generated in the system? It decreased by a factor of 3. It decreased by a factor of 2. It increased by a factor of 2. It increased by a factor of 3.

Answers

When the mass of the cylinder increases from 3. 0 kg to 6. 0 kg, the amount of heat generated in the system increases by a factor of 2.

The given parameters:

Initial mass of the cylinder, m₁ = 3.0 kgFinal mass of the cylinder, m₂ = 6.0 kg

The amount of heat generated in the system is calculated as follows;

Q = mcΔT

where;

m is the massc is the specific heat capacityΔT is the change in temperature

If we keep every other parameters constant and change the mass from 3.0 kg to 6.0 kg, the increase in the heat generated is calculated as follows;

[tex]Q_1 = 3c \Delta T\\\\Q_2 = 6c\Delta T\\\\Q_2 = 2(3c \Delta T)\\\\Q_2 = 2Q_1[/tex]

Thus, when the mass of the cylinder increases from 3. 0 kg to 6. 0 kg, the amount of heat generated in the system increases by a factor of 2.

Learn more about heat capacity here: https://brainly.com/question/16559442

A car takes off from rest takes of from rest and covers a distance of 80m on a straight road in 10s.Calculate the magnitude of its acceleration.​

Answers

Initial velocity (u) = 0 m/s [the car was at rest]Distance (s) = 80 mTime (t) = 10 sLet the magnitude of acceleration be a.By using the equation of motion, [tex]s = ut + \frac{1}{2} a {t}^{2} [/tex]we get,[tex]80 = 0 \times 10 + \frac{1}{2} \times a \times {10}^{2} \\ = > 80 = \frac{1}{2} \times 100a \\ = > 80 = 50a \\ = > a = \frac{80}{50} \\ = > a = 1.6[/tex]

Answer:

The magnitude of its acceleration is 1.6 m/s^2.

Hope you could get an idea from here.

Doubt clarification - use comment section.

what led scientists to the discovery of the strong nuclear force?

Answers

Answer:

Explanation:

The concept of a new strong nuclear force was introduced. In 1935, the first theory for this new force was developed by the Japanese physicist Hideki Yukawa, who suggested that the nucleons would exchange particles between each other and this mechanism would create the force.

a plane mirror forms a virtual image why​

Answers

Light rays from the object strike the mirror and reflect according to the law of reflection. This image is called a virtual image because the light does not actually pass through the image. Because the rays of light never meet at a real focus and the image cannot be obtained on a screen

2. Think about an activity you may have learned that involves muscle memory. Consider when you first learned the activity, how easy or difficult it was the first time, and if you can do it now without thinking. What happened in your brain during practices that resulted in muscle memory for you?

Answers

Answer:

Muscle memory is found in many everyday activities that become automatic and improve with practice, such as riding bicycles, driving motor vehicles, playing ball sports, typing on keyboards, entering PINs, playing musical instruments, poker, martial arts, and dancing.

Explanation:

Elliot jumps up and down on a pogo stick. He weighs 600.N, and his pogo stick has a spring with spring constant 1100N/m. What is the height he will reach when he has gravitational potential energy 250J? m

Answers

From conservation of energy, the height he will reach when he has gravitational potential energy 250J is 0.42 meters approximately

The given weight of Elliot is 600 N

From conservation of energy, the total mechanical energy of Elliot must have been converted to elastic potential energy. Then, the elastic potential energy from the spring was later converted to maximum potential energy P.E of Elliot.

P.E = mgh

where mg = Weight = 600

To find the height Elliot will reach, substitute all necessary parameters into the equation above.

250 = 600h

Make h the subject of the formula

h = 250/600

h = 0.4167 meters

Therefore, the height he will reach when he has gravitational potential energy 250J is 0.42 meters approximately

Learn more about energy here: https://brainly.com/question/24116470

Which are the most likely products for the following reaction? Zn + CuSO4 --> ?

Answers

Answer:

It's going to be a single displacement reaction

So we'll get ZnSO4 + Cu for the following reaction Zn + CuSO4

Equation:

Zn + CuSO4 ------> Cu + ZnSO4

A diffraction grating is 1.50 cm wide and contains 2000 lines. When used with light of a certain wavelength, a third-order maximum is formed at an angle of 20.0°. What is the wavelength (in nm)?

Answers

Answer:

because of the gravity of the earth

what's the mass of the star rasalas?

Answers

Answer: The Rasalas's solar mass is 1.50 times that of our star, the Sun. The Sun's Mass is 1,989,100,000,000,000,000,000 billion kg.

Explanation:

Answer:

The Rasalas's solar mass is 1.50 times that of our star, the Sun. The Sun's Mass is 1,989,100,000,000,000,000,000 billion kg. which to calculate using this website is too large. To give idea of size, the Sun is 99.86% the mass of the solar system.

Explanation:

what is the horse power of an electric motor which can do by 1250 joule of work in 5 seconds​

Answers

1250 J in 5 sec= 250 Joule(s) per second (1250/5 0

250 Joules per second = 250 Watts ( 1J/s = 1 Watt per definition)

250 Watts output = 250/0.65 efficiency = 384 Watts input

1 Horsepower = 732 Watts

Motors 1 Horsepower and under are made in certain step sizes like

3/4 , 1/2 , 1/3, 1/4, 1/16 1/20 of a Horsepower.

3/4 Horsepower is 549 Watts

1/2 Horsepower is 366 Watts

so you need to 3/4 horsepower motor to achieve 1250 J of work in 5 seconds.
Other Questions
4. Why should main points be limited in a speech? determine the moments of inertia of the quartercircular area about the x- and y- axes, and find the polar radius of gyration about point o. 1) According to section six of the passage, the easiest way to assemble the quilt is by using the reverse bag method. Based on thisinformation, you can tell that the authorA) invented the reverse bag method.B) dislikes the final steps in assemblyhas trouble assembling her own quilts.D) has used the reverse bag method before. X/2 = Y/3 = Z/4. prove that :2X-Y+5Z / 3Y-X =3. note :: (/) is for a fraction aka divide. help pls I've been stuck on it for a few days The element phosphorus is located to the right of the element magnesium along the same period in the periodic table.Which best describes the relationship of the elements?Magnesium has a larger atomic number. Phosphorus has a larger atomic mass.Magnesium is in the same category as phosphorus. Phosphorus has similar chemical properties as magnesium. based on the excerpt, the westward migration by the mormons in the 1830s and 1840s was most likely motivated by the what is equivalent to 1 and 5/6?? and what is 3 and 1/6 equivalent to? A 100 MHz generator with Vg= 10/00 v and internal resistance 50 ohms air line that is 3.6m and terminated in a 25+j25 ohm load What is the inverse operation of subtract 6?O A. multiply by 6O B. add 6O C. subtract 6O D. divide by 6 Complete the given equation and mention whether heat is absorbed or evolved during the chemical reaction. NaOH + HCl . + . need help !! :) no unwanted ans ... 8 (x minus 2) = 64. 8 x minus 16 = 64. 8 x = 80. x = 10.Which property is used in the last step to find that x = 10? what is language features? How many types of windows does Python use?a.fourb.fivec.oned.two volume ofaconeareTheand a cylinderin 9the ratio 1:9 respectively. The height and diameterof16cm and 14cm. The diameter ofthe28cm. Find the height of the cylinkes.theconeare15cylinder te consideras un mejor lder en tu empresa o que crees que puedes trabajar para lograr serlo o ser un mejor lder Can someone please help me with this one? :D ty! last week, dave predicted his weight at his physical would be 164 lbs. At the doctors his actual weight was 175 lbs. what was the percent of error in Daves estimate? What do u get after dividing the sum of 352 and 698 by 5 2 ways tendons play an important role in a muscles ability to make the body move? Be thorough! Explain four reasons of preserving farm produce