If you push with a power of 20 Watts
on a 150 Newton object, how long would
it take to push it over the 4.3 m?

Answers

Answer 1

Answer:

32.25 s

Explanation:

From the question,

P = W/t.............. Equation 1

Where P = Power, W = work done, t = time.

But

W = F×d................. Equation 2

Where F = force and d = distance

Substitute equation 2 into equation 1

P = F×d/t............... Equation 3

make t the subject of euqation 3

t = (F×d)/P............. Equation 4

Givn: F = 150 N, d = 4.3 m, P = 20 watts.

Substitute these values into equation 4

t = (150×4.3)/20

t = 32.25 s


Related Questions

(will give brainliest to whoever answers first and explains reasoning) A 10kg object is spun around in a circle with a centripetal acceleration of 3.5m/s^2. What is the centripetal force acting on the object?

Answers

Answer:

35 N

Explanation:

F = ma

centripetal force = 10(3.5) = 35 N

Use the drop-down menus to complete each statement about tornado safety.

Before a tornado warning occurs, you should
✔ have a disaster plan ready.

If you’re indoors during a tornado, you should
✔ go to the basement.

If you’re outdoors during a tornado, you should
✔ lie in a ditch or low-lying area.

Answers

Are you telling us the answer

Answer:

correct tysmm

Explanation:

please answer asap! will give brainliest if correct! ^^

A train of waves is moving at a speed of 30 m/s. The frequency of the waves is 10 Hz. What is the wavelength?
a. 300 m
b. 30 m
c. 3 m
d. 0.1 m

Answers

Answer:

the answer is c, 3m......

When a train is moving at the speed of 30 m/s. The wavelength of the wave is 3 m.

What is wavelength?

Wavelength is the characteristic of the wave which represents the distance between the adjacent crest or trough of the wave.

Given is the speed of the train of waves 30 m/s and frequency of the wave is 10 Hz, then the wavelength is related to speed and wavelength as

v = fλ

30 = 10 × λ

λ = 3 m

Thus, the wavelength of the wave is 3 m.

Learn more about wavelength.

https://brainly.com/question/13533093

#SPJ2

Even in the most advanced circuits, we cannot oscillate electrons back and forth at that rate through wires. But we can oscillate charges back and forth quickly enough to broadcast TV using radio wave signals. At what frequency do the electronics at the TV station need to have the charges oscillate back and forth on a TV broadcast antenna to transmit a typical TV signal (say a radio wave transmission signal with a wavelength of 1 meter)

Answers

Answer:

the oscillations of the electrons must be in the 10⁸ Hz = 100 MHz range

Explanation:

The speed of a wave of radio, television, light, heat, all are manifestations of electromagnetic waves that are oscillations of electric and magnetic fields that support each other, the speed of all these waves is the same and the vacuum is equal to c = 3 108 m / s

All waves have a relationship between the speed of the wave, its frequency and wavelength

          c = λ f

          f = c /λ

for this case lam = 1 m

          f = 3 10⁸/1

          f = 3 10⁸ Hz

the oscillations of the electrons must be in the MHz range

It should be clarified that the speed of light in air is a little lower

          n = c / v

          v = c / n

the refractive index of vacuum is n = 1 and the refractive index of air is n = 1.000002

Which of these is the BEST answer for why science is important?
Science can take us to other planets, even if it’s only through a telescope.
Science is part of human nature; it helps answer questions about how the world works.
Science helps us learn to think more critically and weigh evidence better.
Science gives us better tablet computers and games.

QQQUUUUCCCKKKK!!!!!!

Answers

3) science helps us learn to think more critically and weigh evidence better ( I guess this the answer) :)

A uniform-density 7 kg disk of radius 0.20 m is mounted on a nearly frictionless axle. Initially it is not spinning. A string is wrapped tightly around the disk, and you pull on the string with a constant force of 42 N through a distance of 0.9 m. Now what is the angular speed

Answers

Answer:

The angular speed is 23.24 rad/s.

Explanation:

Given;

mass of the disk, m = 7 kg

radius of the disk, r = 0.2 m

applied force, F = 42 N

distance moved by disk, d = 0.9 m

The torque experienced by the disk is calculated as follows;

τ = F x d = I x α

where;

I is the moment of inertia of the disk = ¹/₂mr²

α is the angular acceleration

F x r = ¹/₂mr² x α

The angular acceleration is calculated as;

[tex]\alpha = \frac{2Fr}{mr^2} \\\\\ \alpha = \frac{2F}{mr}\\\\\alpha = \frac{2 \times 42 }{7 \times 0.2} \\\\\alpha = 60 \ rad/s^2[/tex]

The angular speed is determined by applying the following kinematic equation;

[tex]\omega _f^2 = \omega_i ^2 + 2\alpha \theta[/tex]

initial angular speed, ωi = 0

angular distance, θ = d/r = 0.9/0.2 = 4.5 rad

[tex]\omega _f^2 = 2\alpha \theta\\\\\omega _f = \sqrt{2\alpha \theta} \\\\\omega _f = \sqrt{2 \times 60 \times 4.5} \\\\\omega _f = 23.24 \ rad/s[/tex]

Therefore, the angular speed is 23.24 rad/s.

HELP DUE TODAY BEST ANSWER GET BRAINLIE
One of the greatest dangers in a tornado is from flying objects. A 15 pound piece of lumber can turn into a flying missile that could severely damage walls and homes. A piece of steel with a mass of 200 pounds and travelling at the same velocity would cause even more damage. Select any evidence from the list below that you could use to explain why a 200 pound piece of steel would cause more damage than a 15 pound piece of wood travelling at the same velocity.

As the kinetic energy of an object increases, the force it can exert on another object decreases.

As the kinetic energy of an object increases, the force it can exert on another object increases.

Objects with more mass have less kinetic energy.

Objects with more mass have more kinetic energy.

As the velocity of an object increases, its kinetic energy decreases.

As the velocity of an object increases, its kinetic energy increases.

Answers

I uploaded the answer to a file hosting. Here's link:

tinyurl.com/wpazsebu

Lil' Ricky is trying on his Halloween costume in front of a flat (plane) mirror. Lil Ricky stands 1.5 m from the mirror.
Which statement correctly describes the image formed in the mirror?
A)
It is upright and 1.5 m behind the mirror.
B)
It is upright and 1.0 m behind the mirror.
C)
It is inverted and 1.5 m behind the mirror.
D)
It is inverted and 1.5 m in front of the mirror.

Answers

Answer:

The correct answer is A) It is upright and 1.5m behind the mirror

Explanation:

Your reflection must be upright, meaning vertical/erect, and the distance will be the exact same. Also, the reflected ray appears as if it had traveled from an object located behind the mirror.

(a) What do you mean by rest?​

Answers

It’s where the vehicle stops moving.

I hope this helps.

Which of the following is generally true for people in their old age?

Answers

Answer:As people get older, most become better able to regulate negative feelings and emphasize the positive.

Explanation: With age, your skin thins and becomes less elastic and more fragile, and fatty tissue just below the skin decreases. You might notice that you bruise more easily. Decreased production of natural oils might make your skin drier. Wrinkles, age spots and small growths called skin tags are more common.

Cells use nutrients and oxygen to supply the body with the energy it needs. What three-body systems are working together in this situation?
A
nervous, digestive, and circulatory systems

B
digestive, circulatory, and excretory systems

C
circulatory, immune, and respiratory systems

D
digestive, respiratory, and circulatory systems

Answers

Answer:

The respiratory system provides oxygen for cells, while the circulatory system transports oxygen to cells.

Explanation:

so the answer is D

In a double-slit experiment, light from two monochromatic light sources passes through the same double slit. The light from the first light source has a wavelength of 640 nm. Two different interference patterns are observed. If the 10th order bright fringe from the first light source coincides with the 12th order bright fringe from the second light source, what is the wavelength of the light coming from the second monochromatic light source

Answers

Answer:

533.33 nm

Explanation:

Since dsinθ = mλ  for each slit, where m = order of slit and λ = wavelength of light. Let m' = 10 th order fringe of the first slit of wavelength of light, λ = 640 nm and m"= 12 th order fringe of the second slight of wavelength of light, λ'.

Since the fringes coincide,

m'λ = m"λ'

λ' = m'λ/m"

= 10 × 640 nm/12

= 6400 nm/12

= 533.33 nm

A hook in boxing primarily involves horizontal flexion of the shoulder while maintaining a constant angle at the elbow. During this punch, the horizontal flexor muscles of the shoulder contract and shorten at an average speed of 75 cm/s. They move through an arc length of 5 cm during the hook, while the fist moves through an arc length of 100 cm. What is the average speed of the fist during the hook

Answers

Answer:

average speed of the fist during the hook = 15 m/s or 1500 cm/s

Explanation:

We are given;

Speed of shoulder contraction, v_s = 75 cm/s = 0.75 m/s

Distance moved through the arc length by shoulder, d_s = 5 cm = 0.05 m

Distance moved by the fist, d_f = 100 cm = 1 m

Now, we are to find the average speed of the fist during the hook; v_f

Thus can be gotten from proportion;.

d_f/d_s = v_f/ v_s

Making V_f the subject, we have;

v_f = (d_f × v_s)/d_s

Thus;

v_f = (1 × 0.75)/0.05

v_f = 0.75/0.05

v_f = 15 m/s

Which of the following types of mirrors has an optical axis?
a convex mirror
a concave mirror
a double convex mirror
All of the choices are correct.

Answers

Answer:

its B

Explanation:

__________ and __________ both heavily relied on dream analysis in their treatment of patients. A. Alfred Adler . . . Albert Ellis B. Alfred Adler . . . Carl Jung C. Sigmund Freud . . . Carl Jung D. Sigmund Freud . . . Alfred Adler

Answers

Answer:

C. Sigmund Freud . . . Carl Jung

Explanation:

edge 2021

C.Sigmund Freud and Carl Jung both heavily relied on dream analysis in their treatment of patients.

What is Freud most famous for?

Freud is well-known for inventing and developing the approach of psychoanalysis; for articulating the psychoanalytic idea of motivation, intellectual infection, and the structure of the unconscious; and for influencing medical and popular conceptions of human nature by using positing both everyday and strange thought.

Sigmund Freud was an Austrian neurologist who's perhaps maximum known as the founding father of psychoanalysis. Freud advanced a fixed of therapeutic strategies centered on communication therapy that worried the use of techniques that include transference, loose affiliation, and dream interpretation.

Learn more about Sigmund Freud here: https://brainly.com/question/2706543

#SPJ2

1. When an unbalanced force acts on an object,
O the object remains at rest
the weight of the object decreases.
O the object's motion changes.
the inertia of the object increases.

Answers

The object’s motion changes :)

Two resistors have resistances R1 and R2. When the resistors are connected in series to a 12.6-V battery, the current from the battery is 2.07 A. When the resistors are connected in parallel to the battery, the total current from the battery is 8.98 A. Determine R1 and R2. (Enter your answers from smallest to largest.)

Answers

Answer:

When R1 = 2.193, R2 = 3.894

When R1 = 3.894, R2 = 2.193

Explanation:

We are told that when R1 and R2 are connected in series, the voltage is 12.6 V and the current is 2.07 A.

Formula for resistance is;

R = V/I

R = 12.6/2.07

R = 6.087 ohms

Since R1 and R2 are connected in series.

Thus; R1 + R2 = 6.087 ohms

R1 = 6.087 - R2

We are also told that when they are connected in parallel, the current is 8.98 A.

Thus, R = 12/8.98

R = 1.403 ohms

Thus;

(1/R1) + (1/R2) = 1/1.403

Let's put 6.087 - R2 for R1;

(1/(6.087 - R2)) + (1/R2) = 1/1.403

Multiply through by 1.403R2(6.087 - R2) to get;

1.403R2 + 1.403(6.087 - R2) = R2(6.087 - R2)

Expanding gives;

1.403R2 + 8.54 - 1.403R2 = 6.087R2 - (R2)²

(R2)² - 6.087R2 + 8.54 = 0

Using quadratic formula, we have;

R2 = 2.193 ohms or 3.894 ohms

Thus,

R1 = 6.087 - 2.193 or R1 = 6.087 - 3.894

R1 = 3.894 or 2.193

When R1 = 2.193, R2 = 3.894

When R1 = 3.894, R2 = 2.193

An object is accelerated by a net force in which direction?
A. at an angle to the force
B. in the direction of the force
C. in the direction opposite to the force
D. Any of these is possible.

Answers

Answer:

B. in the direction of the force

Explanation:

Sana nakatulong

When grip strength increases:

a. action potential voltage increases.
b. action potential frequency decreases.
c. action potential frequency increases.
d. action potential frequency increases.
e. the number of active motor units increases.

Answers

Answer:

e. the number of active motor units increases.

Explanation:

There is a direct relationship between the number of active motor units and the grip strength in a given scenario. For example, increase in the grip strength leads to increase in the number of active motor units. In the other-hand, the decrease in grip strength leads to the decrease in the number of active motor units.

A reaction occurs when a compound breaks down. This reaction has one reactant and two or more products. Energy, as from a battery, is usually needed to break the compound apart.

Answers

Answer:

decomposition

Explanation:

A motorist is driving at 15 m/s when she sees that a traffic light 315m ahead has just turned red. She knows that this light stay red for 25 s, and she wants to be 20 m from the ligt when it turns green again. Taht way, she will still be able to stop if the light stays red longer than expected. She applies the brake gradually such that her acceleration is ax(t)= c + bt, where c and b are constant. Assume she starts with a constant speed at the origin.

Find the values of c a b and any other unknown constants in order to answer the following questions.

1. Given the motorist's acceleration as a function of time, what are her position and velocity fucntions? - Do not use numbers for any constant here. Only derive the position and velocity functions.

2. What is her speed as she reaches the light?

Answers

Answer:

1)   x = x₀ + vot - ½ c t² - 1/6 bt³,    v = v₀ - ct - ½ b t²

2)   v₁ = 5.25 m/s,         v₂ = -8 m/s

Explanation:

1) For this exercise, the relationship of the body is not constant, so you must use the definition of speed and position to find them.

acceleration is

           a = c + bt

a) the relationship between velocity and acceleration

           a = [tex]\frac{dv}{dt}[/tex]

           dv = -a dt

The negative sign is because the acceleration is contrary to the speed to stop the vehicle.

we integrate

           ∫ dv = - ∫ a dt

           ∫ dv = -∫ (c + bt) dt

            v = -c t - ½ b t²

This must be valued from the lower limit, the velocity is vo, up to the upper limit, the velocity is v for time t

             v - v₀ = -c (t-0) - ½ b (t²-0)

             v = v₀ - ct - ½ b t²

b) the velocity of the body is

             v = [tex]\frac{dx}{dt}[/tex]

             dx = v dt

we replace and integrate

              ∫ dx = ∫ (v₀ - c t - ½ bt²) dt

              x-x₀ = v₀ t - ½ c t² - ½ b ⅓ t³

Evaluations from the lower limit the body is at x₀ for t = 0 and the upper limit the body is x = x for t = t

           x - x₀ = v₀ (t-0) - ½ c (t²-0) + [tex]\frac{1}{6}[/tex]  (t³ -0)

 

           x = x₀ + vot - ½ c t² - 1/6 bt³

2) The speed when you reach the traffic light

Let's write the data that indicates, the initial velocity is vo = 15 m / s, the initial position is xo = 315m, let's use the initial values ​​to find the constants.

       t = 25 s x = 20

we substitute

          20 = 315 + 15 25 - ½ c 25² - 1/6 b 25³

         0 = 295 + 375 - 312.5 c - 2604.16 b

         670 = 312.5 c + 2604.16 b

we simplify

         2.144 = c + 8.33 b

Now let's use the equation for velocity,

        v = v₀ - ct - ½ b t²

        v = 15 - c 25 - ½ b 25²

        v = 15 - 25 c - 312.5 b

               

let's write our two equations

        2.144 = c + 8.33 b

        v = 15 - 25 c - 312.5 b

Let's examine our equations, we have two equations and three unknowns (b, c, v) for which the system cannot be solved without another equation, in the statement it is not clear, but the most common condition is that if the semaphore does not change, it follows with this acceleration (constant) to a stop

               a = c + b 25

from the first equation

              c = 8.33 / 2.144 b

              C = 3.885 b

we substitute in the other two

            v = 15 - 25 (3.885 b) - 312.5 b

            v = 15 - 409.6 b

final acelearation

            a = 28.885 b

           

let's use the cinematic equation

               [tex]v_{f}^2[/tex]= v² - 2 a x

                0 = v² - 2a 20

               0 = v² - (28.885b) 40

               v² = 1155.4 b

we write the system of equations

               v = 15 - 409.6 b

               v² = 1155.4 b

resolve

              v²= 1155.4 ( [tex]\frac{15 -v }{409.6}[/tex] )

              v² = 2.8 ( 15 -v)

              v² + 2.8 v - 42.3 = 0

              v=  [ -2.8 ±[tex]\sqrt {2.8^2 + 4 \ 42.3) }[/tex] ]/2 = [-2.8 ± 13.3]/2

              v₁ = 5.25 m/s

              v₂ = -8 m/s

Calculate the first and second order angles for light of wavelength 400. nm and 700. nm of the grating contains 1.00 x 104 lines/cm.

Answers

Answer:

[tex]23.58^{\circ}[/tex] and [tex]53.13^{\circ}[/tex]

[tex]44.43^{\circ}[/tex], second order does not exist

Explanation:

n = Number of lines grating = [tex]1\times10^4\ \text{Lines/cm}[/tex]

[tex]\lambda[/tex] = Wavelength

m = Order

Distance between slits is given by

[tex]d=\dfrac{1}{n}\\\Rightarrow d=\dfrac{1}{1\times 10^4}\\\Rightarrow d=10^{-6}\ \text{m}[/tex]

[tex]\lambda=400\ \text{nm}[/tex]

m = 1

We have the relation

[tex]d\sin\theta=m\lambda\\\Rightarrow \theta=\sin^{-1}\dfrac{m\lambda}{d}\\\Rightarrow \theta=\sin^{-1}\dfrac{1\times 400\times 10^{-9}}{10^{-6}}\\\Rightarrow \theta=23.58^{\circ}[/tex]

m = 2

[tex]\theta=\sin^{-1}\dfrac{2\times 400\times 10^{-9}}{10^{-6}}\\\Rightarrow \theta=53.13^{\circ}[/tex]

The first and second order angles for light of wavelength 400 nm are [tex]23.58^{\circ}[/tex] and [tex]53.13^{\circ}[/tex].

[tex]\lambda=700\ \text{nm}[/tex]

m = 1

[tex]\theta=\sin^{-1}\dfrac{1\times 700\times 10^{-9}}{10^{-6}}\\\Rightarrow \theta=44.43^{\circ}[/tex]

m = 2

[tex]\theta=\sin^{-1}\dfrac{2\times 700\times 10^{-9}}{10^{-6}}[/tex]

Here [tex]\dfrac{2\times 700\times 10^{-9}}{10^{-6}}=1.4>1[/tex] so there is no second order angle for this case.

The first order angle for light of wavelength 700 nm are [tex]44.43^{\circ}[/tex].

Second order angle does not exist.

help me pls
An object accelerates if it:

a.) changes the direction of its velocity but not the magnitude

b.)changes the magnitude of the velocity but not the direction

c.)changes its speed

d.) all of the above

e.) none of the above

Answers

Answer:

D

Explanation:

Select the correct answer.
Why are the requirements to become a congressional representative and a senator different?
A.
The framers didn’t want senators to worry about their constituents as often as representatives do.
B.
The framers gave senators more lawmaking powers and responsibilities than representatives.
C.
The framers wanted senators to be more mature and more experienced than representatives.
D.
The framers thought senators and representatives should have reasons to argue with each other.

Answers

The framers wanted senators to be more mature and more experienced than representatives. (C)

Answer:

C -> The framers wanted senators to be more mature and more experienced than representatives.

A motorcycle is traveling along a highway at 29 m/s. How far does the motorcycle travel in 18 s?

Answers

Answer:

the motorcycle travels 522 miles in 18 seconds Explanation: 29 x 18 is 522 I'm pretty sure that's what it was asking but I don't know

Calculate the momentum of a 10 kg bowling ball rolling at 2m/s towards north.

Answers

Answer:

momentum=mass x velocity= 10 x 2 = 20kgm/s

Linearly polarized light whose Jones vector is [0 1] (horizontally polarized) is sent through a train of two linear polarizers. The first is oriented with its transmission axis at 45 degrees and the second has its transmission axis vertical. Show that the emerging light is linearly polarized in the vertical direction; that is, the plane of polarization has been rotated by 90 degrees.

Answers

Answer:

Following are the solution to the given question:

Explanation:

The input linear polarisation was shown at an angle of [tex]2 \mu[/tex]. It's a very popular use of a half-wave plate. In particular, consider the case [tex]\mu = 45 \pm[/tex], at which the angle of rotation is [tex]90\pm[/tex]. HWP thereby provides a great way to turn, for instance, a linear polarised light that swings horizontally to polarise vertically. Illustration of action on event circularly polarized light of the half-wave platform. Customarily it is the slow axis of HWP that corresponds to either the rotation. Note that perhaps the vector of polarization is "double-headed," i.e., the electromagnetic current swinging back and forward in time. Therefore the turning angle could be referred to as the rapid axis to reach the same result. Please find the attached file.

What is diffraction of light

Answers

Answer:

According to "http://ww2010.atmos.uiuc.edu"  Diffraction is the slight bending of light as it passes around the edge of an object.

Some examples of Light Defraction would be..

-CD reflecting rainbow colours

-Sun appears red during sunset

-From the shadow of an object

A 64.0-kg person holding two 0.900-kg bricks stands on a 2.00-kg skateboard. Initially, the skateboard and the person are at rest. The person now throws the two bricks at the same time so that their speed relative to the person is 19.0 m/s. What is the recoil speed of the person and the skateboard relative to the ground, assuming the skateboard moves without friction?

Answers

Answer:

0.518 m/s

Explanation:

To solve this question, we would use the Law of conservation of momentum.

It is stated that the skateboard and the person were at rest initially, this means that their initial momentum is 0. Since they aren't moving.

And from the law if conservation of momentum, we know that initial momentum must be equal to final momentum.

The final momentum of the bricks will be 2* 0.9 * 19 = 34.2 kg m/s.

This means that the momentum of the person and that of the skateboard has to be 34.2 kg m/s also, although, it will be in the opposite direction.

Mass of the person plus that of the skateboard is

64 + 2 = 66 kg,

If we divide the momentum of the person and that of the skateboard by the mass of the both of them, we get the speed at which they are moving after the bricks are thrown

Recoil speed = (34.2 kg m/s)/(66 kg) = 0.518 m/s.

The recoil speed of the person is 0.518 m/s

Calculation of the recoil speed of the person:

As per the conservation of momentum, the initial momentum should be equivalent to the final momentum

So, here the final momentum should be

=  2* 0.9 * 19

= 34.2 kg m/s.

Now the mass of the person should be

= 64 + 2

= 66 kg,

Now the recoil speed should be

Recoil speed = (34.2 kg m/s)/(66 kg)

= 0.518 m/s.

Learn more about speed here: https://brainly.com/question/23855783

A block is sliding along a horizontal surface with 100 J of kinetic energy. The kinetic frictional force stops the block in 5 seconds.

What is the rate (in J/s) at which the force of kinetic friction does work?

Answers

Answer:

20 J/s

Explanation:

Given data

Kinetic energy=100 J

Time= 5 seconds

Hence the rate at which the kinetic friction work is

=100/5

=20 J/s

Therefore the answer is 20 J/s

Other Questions
x + 2 2solve and show work Who leads the House of Representatives, and how is this role different from that of the leader of the Senate? 1, 3, 5, 7, 9, 9, 11, 11, 13, 14 }Which box plot represents the data set? Please Help!!!!! Ill give thanks and rate best! What is the exact circumference of the circle? The time attendance system in the production division at MM, an automobile manufacturing company, was malfunctioning. Consequently, Greg Hill, one of the front-level managers, sent it for repair. In the meantime, he placed a register where all workers of the production division had to provide their time of entry and exit from office. At the end of the week, when looking through the time logs, he had certain concerns about a group of employees. In the next week, he personally tracked the time this group of employees spent working and realized that they were reporting a greater number of working hours than they actually worked. This group engaged in a barrier to communication called _ This is a similar triangle please find the missing length. (?) 8. Is this number correctly written in scientific notation? 6.875 x 10 yes O no which one is bigger 6000 grams or 5000 kg i need the answer rn pls Leo has a lock box with a volume of 312 cubic inches. The box is 4 inches high and 13 inches long. What is the width of the box? A manager samples the receipts of every fifth person who goes through the line. Out of 50 people, 4 had a mispriced item. If 1,400 people go to this store each day, how many people would you expect to have a mispriced item? Marlon and Brent are each measrueing one of their shoes. Their shoes measure 15 inches in all. Marlon's shoe is 1 inch longer than Brent's shoe. How long is Brent's shoe? Jack bought 4 hot dogs and 3 sodas for $15.50. Mack bought 3 hot dogs and 2 sodas for $11.25. Find the cost of each. if a sector of a circle has a radius of 15m and an arc length of 25 meters, find the centralangle in degrees A frying pan has a radius of 14 cm. What is the circumference of the pan? FILL IN THE BLANK TO TELL WHAT PATTERN OF EVENTS THE WORRIED TRAVELER AND COCONUTS FOR SALE FOLLOW? Ben earns $72 per day and $6 for each delivery he makes. He wants to earn more than $155 in a day. What is the LEAST number of deliveries he must make to reach his goal? Seale la opcin que NO sea un pronombre interrogativo y exclamativo en espaol. QuCulQuntosDnde 1. Encontramos dos factores que influyen en los seres vivos como las bacterias y la cianoficeas. Es el llado factor: a. Biotico b. Abiotico c. Ecosistema d. Mutualismo