Answer:
13,basic would be your answer!
Explanation:
Explain this method (Froth floatation method)..........
Answer:
froth flotation is a technique commonly used in the mining industry. In this technique, particles of interest are physically separated from a liquid phase as a result of differences in the ability of air bubbles to selectively adhere to the surface of the particles, based upon their hydrophobicity.
Explanation:
Froth floatation method is commonly used to concentrate sulphide ore such as galena (PbS), zinc blende (ZnS) etc. (ii) In this method, the metaalic ore particles which are perferentially wetted by oil can be separated from gangue. (iii) In this method, the crushed ore is suspended in water and mixed with frothing agent such as pine oil, eucalyptus oil etc. (iv) A small quantity of sodium ethyl xanthate which act as a collector is also added. (v) A froth is generated by blowing air through this mixture. (vi) The collector molecules attach to the ore particles and make them water repellent. (vii) As a result, ore parrticles, wetted by the oil, rise to the surface along with the froth. (viii) The froth is skimmed off and dried to recover the concentration ore. (ix) The gangue particles that are preferentially wetted by water settle at the bottom.
If 3 moles of NaOH is dissolved in 4L of water, what is the
molarity of the solution?
Answer:
0.75mol/LNaOH
Explanation:
Data: Soln:
M= ? M= n/ V(l)
n= 3moles. M= 3mol/ 4L
V= 4L. M = 0.75 mol/LNaOH
1) This rock is made out of cooled magma.
A) Igneous
B) Sedimentary
C) Metamorphic
D) Sandstone
2) This type of rock is made through the processes of heat and pressure.
A) Igneous
B) Sedimentary
C) Metamorphic
D) Sand
3) Sandstone is a sedimentary rock. How does sandstone form?
A) It melted and cooled.
B) It broke into sediment and then compacted.
C) It was heated and put under pressure.
D) Rocks don’t form; they stay as they are.
4) What type of rock can be broken down into sediment through weathering?
A) Igneous
B) Sedimentary
C) Metamorphic
D) All types of rocks
5) How does rock from a mountain turn into small pieces of rock?
A) Wind and rain break the rock into small pieces.
B) Earthquakes and natural disasters break the rock.
C) The sun's rays break the rock.
D) Everything breaks into pieces if you leave it out.
6) Can igneous rock underneath Earth’s outer layer change into sedimentary rock?
A) Yes, but it must be subducted first.
B) Yes, but it must be weathered first.
C) Yes, but it must be uplifted first.
D) No, igneous rock can never become sedimentary.
7) This energy source creates magma, which is melted rock that will turn into igneous rock.
A) Sun
B) Air
C) Earth's Interior
D) Water
8) This energy source helps create weather, which creates sediment to form sedimentary rocks.
A) Air
B) Sun
C) Water
D) Earth's Interior
9) What is the difference between magma and lava?
A) Magma is very hot, lava is cool.
B) Magma is molten rock within the earth; lava is molten rock on the earth's surface.
C) Magma is molten rock on the earth's surface; lava is molten rock within the earth.
D) Magma is cool, lava is very hot.
1. a) Igneous.
2. c) Metamorphic.
3. b) It broke into sediment and then compacted.
4. d) All types of rocks.
5. a) Wind and rain break down the rock into small pieces.
6. a) Yes, but it should be subtuced first.
7. c) Earth's interior.
8. c) Water.
9. b) Magma is molten rock within the Earth; lava is molten rock on the Earth's surface.
A compound accepts electrons from another substance to form a covalent bond. Which term best describes this
compound's behavior?
-Lewis acid
-Arrhenius base
-Bronsted-Lowry acid
-Bronsted-Lowry base
Answer:
A). Lewis Acid
Explanation:
deez
The term that best describes the compound that accepts electrons from another substance to form a covalent bond is Lewis acid.
What is Lewis acid?Lewis acid is a compound or ionic species which can accept an electron pair from a donor compound while a Lewis base is a compound such as the OH- ion, that can donate a pair of non-bonding electrons.
According to this question, a compound accepts electrons from another substance to form a covalent bond.
Therefore, the term that best describes the compound that accepts electrons from another substance to form a covalent bond is Lewis acid.
Learn more about Lewis acid at: https://brainly.com/question/15570523
#SPJ2
Which is a similarity between a fish embryo and a bird embryo in the early stages of development?
Gill slits
forelimbs
jaw bones
hindlimbs
Answer:
Gill Slits
Explanation:
For the one who asked what hind limbs are they are back legs :)
The action of a tree stump splitting bedrock depicts what type of process?
А. chemical weathering
B. physical weathering
С. deposition
D. erosion
Answer: Physical Weathering
Explanation: It is physical weathering because it is caused by natural elements causing the rock to break. It is not chemical weathering because it is not using any chemical reaction to break the rock. It is not erosion or deposition because it is still not finished with the process with breaking the rock. Think of it this way:
Step 1: Weathering - Breaks rock/stone
Step 2: Erosion - Taking the small bits of rock
Step 3: Deposition - Dropping the rock
- Explain why the term greenhouse effect is used to describe the theory of global
warming.
Does the greenhouse effect affect life on Earth? If yes, explain how?
What are the possible effects of a buildup of greenhouse gases in our atmosphere?
What do scientists mean when they refer to population
population is the number of species living in a given area if this is regarding biology or earth studies :)
2.0M Propionic Acid HC3H5O2 Dissolves In Distilled Water. If It Has A Ka Of 1.3*10-5, What Is The Final PH?
The base ethylamine C2H5NH2 has a Kb of 5.6*10-4. What will the pH be in .53 molar solution?
Answer: first you have to calculate the amount ionized. We will say it is x mol / L
then % ionization = (amount ionized / initial concentration) * 100%
x can be calculated using an ice chart
HC3H5O2 -----> H+ + C3H5O2-
Initial HC3H5O2 = 0.250
change = -x
equilibrium = 0.250 - x
initial H+ = 0
change = +x
equilibrium = x
C3H5O2- initial = 0
change = +x
equilibrium = x
Ka = [H=][C3H5O2-] / HC3H5O2]
1.3 * 10 ^ -5 = [x][x] / (0.250 - x)
So 1.3 * 10 ^ -5 * (0.250 - x) = x ^ 2
3.25 * 10^ -6 - (1.3 * 10^-5)x = x^2 now this is a quadratic equation and you have to rearrange it and solve for x
x^2 + 1.3 * 10^-5)x - 3.25 * 10^ -6 = 0
use the equation x = {-b (+ or -)[b^2 - 4.a.c] ^ 1/2} / 2a
you should get x = 1.80 * 10 ^ -3 or x = -1.80* 10^-3
but x can not be negative..
so x = 1.80 * 10 ^ -3
so percent ionization = (1.80 * 10 ^ -3 / 0.250) * 100%
=0.72 %
the other way which is more easier is
assuming that x is very small and therefore 0.250 - x is approximately equals to 0.250
then 1.3 * 10^-5 = x^2 / 0.250
so x^2 = 1.3 * 10^-5 * 0.250
x = 1.80 * 10 ^-3
then percent ionization is = (1.80 * 10 ^ -3 / 0.250) * 100%
=0.72 %
if the percent ionization is > 5 % you can not do that approximation. in such a case you have to solve the quadratic equation. that is why I showed both methods.
now you can do the parts b and c
b answer : percent ionization = 1.27 %
c answer : 2.54%
good luck
what does pen mean?.
Answer:
P = protons
E = electrons
N = neutrons
remember protons and neutrons (protons are positive and neutrons are neutral as you can already tell by their names) are found at the centre of the nucleus (positive mass). Whilst the electrons (negative) orbit around the shells
Which general equation represents an endothermic reaction?
A. reactants - energy - products + energy
B. reactants
products + energy
C. reactants + products - energy
D. reactants + energy
products
Explanation:
The general equation for an endothermic reaction is: Reactants + Energy → Products.
Hope it helps :)❤
The equation represents an endothermic reaction is reactants + energy
products.
What is an endothermic reaction?
Endothermic reactions are chemical reactions in which the reactants soak up warm strength from the surroundings to form products.
net energy is not released.heat is not evolved with the product.heat is required to start the reaction.increase with the increase in temperature.decrease with a decrease in temperature.Learn more about the endothermic reaction here:-https://brainly.com/question/6506846
#SPJ2
The cell wall regulates what enters and exits the cell? True or False
Answer:
True
Explanation:
Answer:No, the Cell Membrane does I'm pretty sure
Explanation:
Neutralization Reactions
5. Acids and bases go to completion via neutralization reactions, thus titrations are applicable. Refer to educational resources and provide an example of the chemical reactions for the solutions in a–c.
a. A mixture between a strong acid and a strong base.
b. A strong base mixed with a weak acid.
c. A strong acid mixed with weak base.
Answer:
its a option neutralization takes place between acid and base plz mark me branliest
Calculate the molarity of a solution that contains 3.00x10-2 mol NH4Cl in exactly 450 cm3 of solution.
Answer:
0.06moles/litres
Explanation:
molarity = no of moles / volume in litres = 3.00*10^-2/(450/1000)=0.06 moles/litres
Answer:
0.07mol/dm^3
Explanation:
Please mark as brainliest
five good habit to clean our surrounding
Answer:
Explanation:
Invest in a reusable water bottle. ...
Bring your own reusable cup. ...
Refuse single-use items. ...
Avoid products with microbeads. ...
Shop in bulk
what career field/job would utilize ppm units
A environmental jobs
B Medical fields
C Jobs at the brewery
D Jobs in analytical chemistry
The heat of a reaction may be found with the equation q=mc triangle T. A 951 g sample of carbon steel with a specific heat capacity of 0.49 J/(g*K) is heated to 673K and quenched in oil. The steel cools to 523K. Assuming there is no heat lost to the surroundings, calculate the heat absorbed by the oil. A) -69.9kj B) -31.5kj C) 69.9 kJ D) 71.2 kj
Answer:b
Explanation:
Answer:
C.
Explanation:
I took the quiz and made a 100
32 g of a metal, M, reacts with 8 g of oxygen to form an oxide. The formula of the oxide is MO. What is the atomic mass of M in g mol-?
Answer: M= 128 g/mol (Te is quite close)
Explanation: number of Oxygen moles is n = 8 g / 32 g/mol = 0,25 mol.
Because formula of oxide is MO, thus amount of metal is also 0,25 mol.
Because n = m/M , Molar mass of the metal M = m/n = 32 g /0.25 mol = 128 g/ mol
what is heterogenous mixture
Answer:
heterogeneous mixture is a mixture that is non-uniform and contains smaller component parts.
Answer:
heterogenous mixture is type of mixture
Explanation:
it is one type of mixture involve in the mixture of different or hetro substance and can also easely separated or seen by naked eye example mixture of water and sand
how do you melt water FREE 100 POINTS
Answer:
by adding heat
Explanation:
Adding heat can cause ice (a solid) to melt to form water (a liquid). Removing heat causes water (a liquid) to freeze to form ice (a solid).
by adding heat
when water was changes to soild or a gas , we say change to a different state of the matter. Even though the waters physical from change its molecular stay the same
Advise a friend who responds to conflict by using the strategies below on why
each (strategy) is not healthy for sustaining positive relationships.
a. Confrontation
Answer:
When there is a conflict and if a friend responding to conflict with confrontation it may affect positively or negatively both ways depend how he responds or confront the other person he has a conflict with. But normally people alienate with the person being confrontational. A friend should try to resolve the conflict by making an amicable solution.
if it is used correctly it could help in making the relationship strong, however, confronting by attacking them verbally, insult them, or talking loudly among the group of people can escalate the conflict.
I will advise him to be cautious of the approach as it may positively or negatively affect the situation.
What is Confrontation?This is the process which involves directly engaging one another in the course of a dispute between them.
This method however could either resolve the conflict or worsen it which is why special approach should be taken by being calm and being respectful to the other party involved.
Read more about Confrontation here https://brainly.com/question/1004819
In a neutralization reaction, bases donate.
*☆*――*☆*――*☆*――*☆*――*☆*――*☆*――*☆*――*☆**☆*――*☆*――*☆*――*☆
Answer: I think it is hydroxide ion but im not sure
Explanation:
I hope this helped!
<!> Brainliest is appreciated! <!>
- Zack Slocum
*☆*――*☆*――*☆*――*☆*――*☆*――*☆*――*☆*――*☆**☆*――*☆*――*☆*――*☆
How many moles is equal 82.4 grams of CO,?
Answer:
1 mole = 28.0101
Hence,
82.4 = around 2.8 mole
Have a great day <3
ionization of sodium dichromate
Explanation:
this is the answer of your question .
hope it helped you
Use the following balanced reaction to solve 1-3:
P4 (s) + 6H2 (g) → 4PH3 (g)
How many grams of phosphorus trihydride will be formed by reacting 60 L of Hydrogen gas with an excess of P4?
Answer:
60.86 g of PH₃
Explanation:
We'll begin by calculating the number of mole of H₂ that will occupy 60 L. This can be obtained as follow:
22.4 L = 1 mole of H₂
Therefore,
60 L = 60 / 22.4
60 L = 2.68 mole of H₂.
Next, we shall determine the number of mole of PH₃ produced by the reaction of 60 L (i.e 2.68 mole) of H₂. This can be obtained as follow:
P₄ + 6H₂ –> 4PH₃
From the balanced equation above,
6 moles of H₂ reacted to produce 4 moles of PH₃.
Therefore, 2.68 moles of H₂ will react to to produce = (2.68 × 4)/6 = 1.79 moles of PH₃.
Finally, we shall determine the mass of 1.79 moles of PH₃. This can be obtained as follow:
Mole of PH₃ = 1.79 moles
Molar mass of PH₃ = 31 + (3×1)
= 31 + 3 = 34 g/mol
Mass of PH₃ =?
Mass = mole × molar mass
Mass of PH₃ = 1.79 × 34
Mass of PH₃ = 60.86 g
Thus, 60.86 g of PH₃ were obtained from the reaction.
Simone is helping her mom cook. She takes a glass casserole dish directly from the refrigerator and put it in the oven. Which best explains the result of putting the cold dish in the hot oven?
Group of answer choices
The dish stays cool and will not warm.
The dish quickly changes color.
The dish cracks or breaks.
The dish contracts and shrinks.
Answer:
I think the dish contracts and shrinks
Answer:
The dish cracks or breaks.
Explanation:
When glass changes temperature rapidly, it may undergo thermal shock. This is stress that is produced by a sudden change in temperature.
An unknown concentration of sodium thiosulfate, Na2S2O3, is used to titrate a standardized solution of KIO3 with excess KI present. Suppose 15.65 mL of the Na2S2O3 solution is required to titrate the iodine formed from 21.55 mL of 0.0131 M KIO3. What is the molarity of the Na2S2O3 solution
Answer: The molarity of [tex]Na_2S_2O_3[/tex] is 0.108 M
Explanation:
[tex]KIO_3+5KI+3H_2SO_4\rightarrow 3K_2SO_4+3H_2O+3I_2[/tex]
[tex]2Na_2S_2O_3+I_2\rightarrow Na_2S_4O_6+2NaI[/tex]
To calculate the number of moles for given molarity, we use the equation:
[tex]\text{Molarity of the solution}=\frac{\text{Moles of solute}}{\text{Volume of solution (in L)}}[/tex]
[tex]\text{Moles of }KIO_3=\frac{0.0131mol/L\times 21.55}{1000}=2.8\times 10^{-4}mol[/tex]
1 mole of [tex]KIO_3[/tex] produces = 3 moles of [tex]I_2[/tex]
[tex]2.8\times 10^{-4}[/tex] moles of [tex]KIO_3[/tex] produces = [tex]\frac{3}{1}\times 2.8\times 10^{-4}=8.4\times 10^{-4}[/tex] moles of [tex]I_2[/tex]
Now 1 mole of [tex]I_2[/tex] uses = 2 moles of [tex]Na_2S_2O_3[/tex]
[tex]8.4\times 10^{-4}[/tex] moles of [tex]I_2[/tex] uses = [tex]\frac{2}{1}\times 8.4\times 10^{-4}=1.69\times 10^{-3}[/tex] moles of [tex]Na_2S_2O_3[/tex]
[tex]\text{Molarity of the solution}=\frac{\text{Moles of solute}}{\text{Volume of solution in L}}=\frac{1.69\times 10^{-3}\times 1000}{15.65}=0.108M[/tex]
The molarity of [tex]Na_2S_2O_3[/tex] is 0.108 M
Describe two functions of blood.
Answer:
Transports Dissolved gases and Controls pH The pH of blood must remain in the range 6.8 to 7.4, otherwise it begins to damage cells.
Explanation:
main functions tho Transportation. Nutrients from the foods you eat are absorbed in the digestive tract. ...
Defense. Many types of WBCs protect the body from external threats, such as disease-causing bacteria that have entered the bloodstream in a wound.
Maintenance of Homeostasis. Recall that body temperature is regulated via a negative-feedback loop.
Which compound is more soluble in water at 25°C?
A.
MgF2 (Ksp = 5.2 x 10-11)
B.
SrF2 (Ksp = 7.9 x 10-10)
C.
AgBr (Ksp = 5.0 x 10-13)
D.
Agl (Ksp = 1.5 * 10-16)
Answer:
B
Explanation:
The solubility depends on the ksp. As the value of ksp increases the compound becomes more and more soluble.
In the options, the highest ksp value is 10^-10, thus that one is the most soluble.
1,3,5,7-Cyclooctatetraene, C8H8, is an unusual hydrocarbon in that it reacts with exactly 2 equivalents of potassium to give A, C8H8K2, which can be isolated as a white solid. A exhibits a single proton NMR signal. Draw the structure of A
Answer:
Explanation:
The main assignment here is to provide the structure of A. But before that, let us explain briefly some certain things:
The proton NMR (1H) gives data about the quantity of non-identical protons present in the structure. The resonance frequency is seen regarding the standard compound (0 ppm), which is addressed as a chemical shift. The same protons have equal value of chemical shift.
The protons that are available in a similar environment are addressed as comparable protons and the protons with various conditions are called non-identical protons.
However, from the image below, we can see the reaction of the compound 1,3,5,7-cyclooctatetraene resulting in 2 equivalents of potassium forming an aromatic dianion.