Answer: I would choose ice
Ice is the solid state of water, a normally liquid substance that freezes to the slid state at temperatures of 0 °C (32 °F) or lower and expands to the gaseous state at temperatures of 100 °C (212 °F) or higer
Answer:
fire
Explanation:
just my opinion but.
If you have fire you could melt things and it defeats ice and ice is easily melted.
Fire is good in a "battle" too lol.
Record the mass of the object based on the reading from the triple-beam balance. The mass of the object is ____ grams.
Hello!
[tex]\large\boxed{167g}[/tex]
Looking at the balance, we see that:
The middle beam reads 100g.
The top beam reads 60g.
The bottom beam reads 7g.
Add all of the numbers together to get the total mass:
100 + 60 + 7 = 167g.
The mass of the object is 167 grams.
Explanation:
A triple beam balance is a mass measuring instrument used in labs to measure the mass of a substance. It unit in which it measures is grams. It consists of three beams which are: The middle beam has Increments of 100 grams The front beam has Increments from 0 grams to 10 grams The farther beam has Increments of 10 gramsGiven :
Readings of all the scales of three beams of the triple beam balance of an object.
To find :
The mass of object whose reading on triple beam balance is given.
Solution:
Middle beam reader at 100 grams
Front beam reader at 7 grams
Farther beam reader at 60 grams
The mass of object:
[tex]100 grams + 7 garms + 60 grams = 167 grams[/tex]
The mass of the object is 167 grams.
Learn more about triple beam balance here:
https://brainly.com/question/12149442
Which of the following best describes a vacuum?
Hot
Cold
Shiny
Empty
Answer:
hot
Explanation:
Answer:
The Answer is (Empty)
6th grade science i mark as brainliest
What is the name of the group that contains potassium?
O Noble Gases
O Halogens
O Alkaline Earth Metals
O Alkali Metals
Transition Metals
Answer:
Alkali Metals
Explanation:
perform the following operation and express the answer in scientific notation
Answer:
2×10⁻⁴
Explanation:
Given data:
2.8 ×10⁻⁶ + 1.4×10⁻²
Solution:
2.8 ×10⁻⁶ + 1.4×10⁻²
2×10⁻⁶⁺²
2×10⁻⁴
Scientific notation is the way to express the large value in short form.
The number in scientific notation have two parts.
. The digits (decimal point will place after first digit)
× 10 ( the power which put the decimal point where it should be)
for example the number 6324.4 in scientific notation will be written as = 6.3244 × 10³
1. How many times will a mole of paperclips (think giant paperclip chain) stretch around the equator of the
earth? (1 paperclip = 0.030 m, Earth's circumference = 4.00 x 10m)
Farmers use conservation practices such as crop rotation to insure that their crops are sustainable. Crop rotation is the process of moving crops to a new location to get the nutrients from the soil needed for that specific crop to grow. What conclusion can be drawn if farmers do not use soil conservation practices such as crop rotation?
A.
If farmers do not use soil conservation practices, the topsoil, which contains weathered rocks, will not be fertile to promote plant growth because of loss of nutrients from the soil.
B.
If farmers do not use soil conservation practices, the topsoil, which contains weathered rocks, will be fertile to promote plant growth because of the loss of nutrients from the soil.
C.
If farmers do not use soil conservation practices, the topsoil, which contains humus, will not be fertile to promote plant growth because of the loss of nutrients from the soil.
D.
If farmers do not use soil conservation practices, the topsoil, which contains humus, will be fertile to promote plant growth because of the loss of nutrients from the soil.
Answer:
C. If farmers do not use soil conservation practices, the topsoil, which contains humus, will not be fertile to promote plant growth because of the loss of nutrients from the soil.
Explanation:
The top soil is rich in humus and not weathered materials. It is not close to the bedrock. Rather, the topsoil is rich in organic matter and it is present as humus in the soil.
If crop rotation is not being practiced, the soil's nutrients would be highly depleted without replenishing them back. With crop rotation the top soil can be made more fertile when it is left uncultivated for a period of time. Instead of heavily relying on a single piece of land, crops can rotated on a timed basis so that soils will have enough time to restore their nutrients.helpppppppp meeeeeee
Answer:
Synthesis
General Formulas and Concepts:
Chemistry - Reactions
Synthesis Reactions: A + B → AB Decomposition Reactions: AB → A + B Single-Replacement Reactions: A + BC → AB + C Double-Replacement Reactions: AB + CD → AD + BCExplanation:
Step 1: Define RxN
RxN: NH₃ + H₂SO₄ → (NH₄)₂SO₄
Step 2: Identify
Combining 2 compounds to form 1.
NH₃ + H₂SO₄ → (NH₄)₂SO₄
A + B → AB
It is a Synthesis Reaction.
(02.01 LC)
Which landform represents a large area of thick ice that moves slowly?
Answer:
Glacier
Explanation:
6. Write the full symbol for an atom with 1 proton, 2 neutrons, and 0 electrons.
Answer:
The element hydrogen has the simplest atoms, each with just one proton and one electron. The proton forms the nucleus, while the electron orbits around it.
Explanation:
What liquid is the most vicious ?
A) water
B) skim milk
C)salt water
D) pancake syrup
im not sure for this one please help me
Answer:
Fairly certain it is the tension of the string
Answer:It would be C
BRAINIEST IF ANSWERED which of the following is a molecule ( A.HCl B.HK C.MgCl2 D.Kl)
Answer: A.HCI
Explanation:
Why are ocean currents important to coastal regions?
Answer:
Warm and cold ocean currents can affect the climate of an area along the coast if the winds blow in from the ocean. Warm ocean currents heat the air above the water and carry the warm air to the land, increasing the temperature of the coastal region.
Explanation:
Ocean currents are important to coastal regions for a number of reasons.
What are the importance?Distribute heat. Ocean currents distribute heat around the globe, which helps to moderate the climate in coastal regions. For example, the Gulf Stream brings warm water from the Gulf of Mexico to the coasts of Europe, which helps to keep Europe's climate warmer than it would be otherwise.
Transport nutrients. Ocean currents transport nutrients from the ocean's depths to the surface, which supports marine life. For example, the California Current brings nutrients from the deep ocean to the surface, which supports a rich marine ecosystem off the coast of California.
Diversify marine life. Ocean currents help to diversify marine life by transporting different species to different parts of the ocean. For example, the Kuroshio Current brings warm water from the western Pacific Ocean to the eastern Pacific Ocean, which has helped to diversify the marine life in this region.
Find out more on coastal regions here: https://brainly.com/question/26796424
#SPJ6
As a car slows down, its kinetic energy increases.
True
False
Answer:
False.
Explanation:
Kinetic energy represents the energy the car has and is using right now. So, if the car was fast, then it would have a lot of kinetic energy. A slow car has a low amount of kinetic energy.
Please help me It would mean everything!!
1. high
You are correct.
Cold region have more air pressure because air is denser.
explain how you would obtain pure water from tap water.Your answer must include reference to the principles involved under the topic separating mixture
Answer:
Simple distillation
collectiveness leads to a good society? how
Answer:
A good society has a transparent talk, they share all matters related to the society, hence everyone knows what's going on. This is why collectiveness leads to a good society.
If my answer helped, kindly mark me as the brainliest!!
Thank You!!
Here is the electron configuration for Argon. What does the coefficient 3 in 3s2 tell us?
Ar: 1s2 2s2 2p6 3s2 3p6 4s2 3d10 4p6
The coefficient 3 represents the electron shell
Further explanationIn an atom there are levels of energy in the shell and sub shell
This energy level is expressed in the form of electron configurations.
Writing electron configurations starts from the lowest to the highest sub-shell energy level. There are 4 sub-shells in the shell of an atom, namely s, p, d and f. The maximum number of electrons for each sub shell is
• s: 2 electrons
• p: 6 electrons
• d: 10 electrons and
• f: 14 electrons
Charging electrons in the sub shell uses the following sequence:
1s², 2s², 2p⁶, 3s², 3p⁶, 4s², 3d¹⁰, 4p⁶, 5s², 4d¹⁰, 5p⁶, 6s², etc.
Argon is a noble gas element with the symbol Ar with atomic number 18 and mass number 40
Electron configuration: [Ne] 3s²3p⁶
The coefficient 3 represents the electron shell, which is denoted as the quantum number n
This shell consists of 3 sub shells namely 3s, 3p and 3d which have a maximum of 18 electrons (3s = 2 electrons, 3p = 6 electrons and 3d = 10 electrons)
A student asks a serious of questions about a wave. The answer to which question will allow the student to determine whether the wave is electromagnetic or mechanical?
Answer:
Does the wave require a medium in order to travel?
Explanation:
The question whose answer would determine whether the wave in question is mechanical or electromagnetic would be if the wave requires a medium in order to travel or otherwise.
A mechanical wave would require a medium in order to transport its energy from one place to another, that is, travel. On the other hand, an electromagnetic wave does not require any medium in order to travel, that is, it can travel through vacuums or empty spaces. Light and sound waves are typical examples of electromagnetic and mechanical waves respectively.
Earth's atmosphere blocks short wavelengths of the electromagnetic spectrum. Which telescopes must be places in orbit around Earth in order to observe short-wavelength radiation?
Answer: gamma-ray telescopes
Explanation:
this is the answer because the question is asking what telescope must be
placed to observe SHORT-WAVELENGTH radiation. Gamma-rays have very short wave-lengths so therefore it would be gamma-ray telescopes. visible, infrared, and radio all have long wave-lengths, so we can instantly eliminate them.
The Earth's atmosphere is known to be able to blocks all X-rays from space. telescopes must be places in orbit around Earth in order to observe short-wavelength radiation is gamma-ray telescope.
X-rays is known to have high energy that are in reflecting telescope. Gamma rays from space is commonly blocked by the Earth's atmosphere as the radiation is lethal.
Gamma-ray telescope is known to be an instrument that is created to detect and resolve gamma rays from space. that is beyond Earth's atmosphere.This rays are able too be detected by the optical flashes that they emit when interacting with the material in a particular defined instrument.
Learn more about Gamma-ray telescope from
https://brainly.com/question/279592
Since the replication crisis, many practices have been implemented to improve research and promote –, or the practice of sharing data and materials so they can be reviewed and replicated by other researchers. One of these practices involves submitting the proposed methods and analysis plan to journals in advance for approval or –. This practice allows scientific journals to approve experiments before they are done, with the guarantee that any finding will be published regardless of whether or not it is significant. This process also prevents researchers from –, or creating theories or hypotheses that explain the results of a study after the data has been collected.
Answer:
Since the replication crisis, many practices have been implemented to improve research and promote open science, or the practice of sharing data and materials so they can be reviewed and replicated by other researchers. One of these practices involves submitting the proposed methods and analysis plan to journals in advance for approval or preregistration. This practice allows scientific journals to approve experiments before they are done, with the guarantee that any finding will be published regardless of whether or not it is significant. This process also prevents researchers from harking, or creating theories or hypotheses that explain the results of a study after the data has been collected.
Explanation:
The blanks in the text above were filled with the terms that best fit the context and meaning of the message that the text, in general, wanted to convey. No grammatical element and no punctuation has been modified, which allows the text to maintain its original coherence and meaning.
The added terms are in agreement with the scientific denominations currently accepted.
Part A
What volume (in mL ) of a 0.150 M HNO3 solution will completely react with 35.7 mL of a 0.108 M Na2CO3 solution according to the following balanced chemical equation?
In the reaction in Part A, what mass (in grams) of carbon dioxide forms?
Volume HNO₃ : 51.4 ml
Mass CO₂ : 0.17 g
Further explanationReaction
Na₂CO₃ + 2 HNO₃ ⇒ 2 NaNO₃ + CO₂ + H₂O
V Na₂CO₃ = 35.7 ml
M Na₂CO₃ = 0.108
mol Na₂CO₃ :
[tex]\tt 35.7\times 0.108=3.8556~mlmol[/tex]
mol ratio Na₂CO₃ : HNO₃ = 1 : 2
mol HNO₃ :
[tex]\tt \dfrac{2}{1}\times 3.8556=7.71~mlmol[/tex]
Volume HNO₃ :
[tex]\tt mol=n=M\times V\\\\V=\dfrac{n}{M}=\dfrac{7.71}{0.15}=51.4~ml[/tex]
mol CO₂ = mol Na₂CO₃ = 3.8556 mlmol=0.00386 mol
mass CO₂(MW=44 g/mol) :
[tex]\tt 0.00386\times 44=0.17~g[/tex]
Click the picture please
Answer:
A chemical change can be indicated by a change in color, change in temperature (exothermic or endothermic), change in smell, formation of a precipitate, or the formation of gas bubbles.
Explanation:
this should work
I am in the second period and belong to the same family as silicon
Answer:
carbon
Explanation:
carbon has 6e- hence belong to group 4 and period 2
Answer:
Boron
Explanation:
Both silicon and boron are metalloids, and boron belongs on the second row (period)
When a 0.4500 g sample of impure potassium chloride was dissolved in water and treated with an excess ofsilver nitrate, 0.8402 g of silver chloride was precipitated. Calculate the percentage KCl in the original sample.
Answer:
97.78% KCl in the original sample
Explanation:
The % of KCl in the original sample would be as follows:
[tex]97.78[/tex]%
Given that,
Amount of sample of impure Potassium Chloride [tex]= 0.4500 g[/tex]
Amount of Silver Nitrate precipitated [tex]= 0.8402g[/tex]
Now,
Molarity of KCl = [tex]74.5 g/mol[/tex]
Minimum moles required for reaction [tex]= 0.0059 mol[/tex]
Final number of moles [tex]= 0.0059 mol[/tex]
So,
Concentration = Number of moles * Molarity
[tex]= 0.0059 mol * 0.74.5 g/mol\\= 0.440g[/tex]
Therefore,
% of KCl in the original Sample = Weight of Pure KCl/Weight of Impure KCl
[tex]= 0.440/0.450[/tex] × [tex]100[/tex]
[tex]= 97.78[/tex]%
Thus, [tex]97.78[/tex]% is the correct answer.
Learn more about "Potassium Chloride" here:
brainly.com/question/19613085
What element is represented in this model of the atomic number is 3
This is science
Answer:
lithium because it has an atomic number of three(you could have just googled which element has the atomic number 3)
If the pressure of a 2.00 L sample of gas is 50.0 kPa, what pressure does the gas exert if its volume is decreased to 20.0 mL?
Which equation should you use?
use B.
✔ 5000
kPa
Answer:
P₂ = 5000 KPa
Explanation:
Given data:
Initial volume = 2.00 L
Initial pressure = 50.0 KPa
Final volume = 20.0 mL (20/1000=0.02 L)
Final pressure = ?
Solution:
The given problem will be solved through the Boly's law,
"The volume of given amount of gas is inversely proportional to its pressure by keeping the temperature and number of moles constant"
Mathematical expression:
P₁V₁ = P₂V₂
P₁ = Initial pressure
V₁ = initial volume
P₂ = final pressure
V₂ = final volume
Now we will put the values in formula,
P₁V₁ = P₂V₂
50.0 KPa × 2.00L = P₂ × 0.02 L
P₂ = 100 KPa. L/0.02 L
P₂ = 5000 KPa
Determine the final temperature of a system, if 120 grams had an initial temperature of 80°C and mixes with 3,000 g of water at an initial temperature of 20°C
Answer:
The final temperature of the mixture is 22.3°C
Explanation:
Assuming that the 120 g substance at 80°C is water, final temperature of the mixture can be determined using the formula:
Heat lost = Heat gained
Heat = mc∆T where m is mass, c is specific heat capacity of water, and ∆T is the temperature change = Tfinal - Tinitial.
Let the final temperature be T
Heat lost = 120 × c × (T - 80)
Heat gained = 3000 × c × ( T - 20)
Equating the heat lost and heat gained
120 × c × -(T - 80) = 3000 × c × (T - 20)
9600 - 120T = 3000T - 60000
60000 + 9600 = 3000T + 120T
69600 = 3120T
T = 69600/3120
T = 22.3°C
Therefore, the final temperature of the mixture is 22.3°C
I'll give brainliest
Answer: Nitrogen
Explanation: