Answer:
ight bet
Explanation:
The phrase "ten meters per second squared" describes the
Answer:
Acceleration
Explanation;
change in velocity over timeTherefore metre per second over second, which is meter per second squaredg During the contraction of the heart, 65 cm3 blood is ejected from the left ventricle into the aorta with a velocity of approximately 98 cm/s. The blood volume traverses the aortic arch, exiting with the same speed but opposite direction. Assume the mass density of the blood is 1060 kg/m3 blood, the aortic arch remains stationary, and that the heart rate is 61 bpm. What is the average force exerted by the blood on the wall of the aorta.
Answer:
The force is [tex]F = 0.1441 \ N[/tex]
Explanation:
From the question we are told that
The volume of blood ejected is [tex]V_b = 65cm^3 = 65*10^{-6} \ m^3[/tex]
The velocity of the ejected blood is [tex]v = 98 cm/ s = 0.98 \ m/s[/tex]
The mass density of blood is [tex]\rho = 1060 \ kg/m^3[/tex]
The heart rate is [tex]R = 61 bpm(beats \ per \ miunite) = \frac{61}{60} = 1.0667\ bps[/tex]
Generally the average force exerted is mathematically represented as
[tex]F = 2 * \rho * V_b * R * v[/tex]
=> [tex]F = 2 * 1060 * (65*10^{-6}) *1.0667 * 0.98[/tex]
=> [tex]F = 0.1441 \ N[/tex]
A ball weighing 60 N is swinging like a pendulum at the end of a 6.0 m rope. As the ball swings through its lowest point, its speed is measured at 5.0 m/s. What is the tension in the rope at this point?
A. 58.6 N
B. 85.4 N
C. 90.2 N
D. 97.3 N
Answer:
B. 85.4 N
Explanation:
The tension in the rope at the lowest point of the motion of the ball is antiparallel to the weight of the ball. By Newton's laws we construct the following equation of equilibrium:
[tex]\Sigma F = T - W = \left(\frac{W}{g} \right)\cdot \frac{v^{2}}{L}[/tex] (1)
Where:
[tex]T[/tex] - Tension in the rope, measured in newtons.
[tex]W[/tex] - Weight, measured in newtons.
[tex]g[/tex] - Gravitational acceleration, measured in meters per square second.
[tex]v[/tex] - Speed of the ball, measured in meters per second.
[tex]L[/tex] - Length of the rope, measured in meters.
If we know that [tex]W = 60\,N[/tex], [tex]g = 9.807\,\frac{m}{s^{2}}[/tex], [tex]v = 5\,\frac{m}{s}[/tex] and [tex]L = 6\,m[/tex], then the tension in the rope at this point is:
[tex]T = W+\frac{W\cdot v^{2}}{g\cdot L}[/tex]
[tex]T = W\cdot \left(1+\frac{v^{2}}{g\cdot L} \right)[/tex]
[tex]T = (60\,N)\cdot \left[1+\frac{\left(5\,\frac{m}{s} \right)^{2}}{\left(9.807\,\frac{m}{s^{2}} \right)\cdot (6\,m)} \right][/tex]
[tex]T = 85.492\,N[/tex]
Hence, the correct answer is B.
Which term best describes the motion of the rope particles in relation to the motion of the rope wave shown in the photograph
Answer:
A: Perpendicular
Explanation:
The question is incomplete as it lacks the image of the rope wave motion.
However, as found on "estudyassistant", the options are;
A) Perpendicular
B) Circular
C) Longitudinal
D) Parallel
From all that, we can say that;
The rope's are moving simultaneously in the same pattern without touching each other.
This is therefore a mechanical wave being created with the motion having oscillations that are perpendicular to the direction of energy transfer of the ropes.
This is a definition of transverse waves because the rope particle motion is perpendicular to the wave motion.
Answer:
A: Perpendicular
Explanation:
Read above explanation.
in the figure if coefficient of friction between block and surface is 0.2 then find acceleration produced by the resultant force acting on the block (take g= 10 m/s²)
☃ First of all we have to calculate frictional force by using below equation :
→ F = μR
→ F = 0.2 × 5 × 10
→ F = 10 N
Hence,the frictional force (F) is 10 N.☃ But we know that frictional force is acting on opposite direction of the motion :
⇏Net force = 15 - 10
⇏Net force = 5 N
Hence,the net force is 5 N.☃ By using Newton's second law we get :
Let the required acceleration produced by the block be 'a'.➝ Force = mass × acceleration
➝ 5 = 5 × a
➝ a = 5 ÷ 5
➝ a = 1 m/s²
Hence,the acceleration produced by the resultant force acting on the block is 1 m/s².A pail in a water well is hoisted by means of a frictionless winch, which consists of a spool and a hand crank. When Jill turns the winch at her fastest water-fetching rate, she can lift the pail the 28.0 m to the top in 11.0 s. Calculate the average power supplied by Jill's muscles during the upward ascent. Assume the pail of water when full has a mass of 7.30 kg.
Answer:
182.28 W
Explanation:
Here ,
m = 7.30 Kg
distance , d= 28.0 m
time , t = 11.0 s
average power supplied = change in potential energy/time
average power supplied = m×g×d/time
average power supplied = 7.30×9.81×28/11
average power supplied = 182.28 W
the average power supplied is 182.28 W
What best describes the speed of light waves in solids, liquids, and gases?
The speed is fastest in solids.
The speed is fastest in liquids.
The speed is fastest in gases.
The speed is the same in all matter.
Answer: It’s fastest in gases. Letter C !
Explanation:
Answer:
its c
Explanation:
The rate of change of velocity or speed is known as acceleration. If a car increases it speed form 10 to 20m/s in 2 seconds, then what is its rate of change in velocity?
A) 5 m/s/s
B) 10 m/s/s
C) 20 m/s/s
D) 40 m/s/s
Answer:
A) 5 m/s/s
Explanation:
Given the following data;
Initial velocity = 10m/s²
Final velocity = 20m/s²
Time, t = 2 seconds.
In physics, acceleration can be defined as the rate of change of the velocity of an object with respect to time.
This simply means that, acceleration is given by the subtraction of initial velocity from the final velocity all over time.
Hence, if we subtract the initial velocity from the final velocity and divide that by the time, we can calculate an object’s acceleration.
Mathematically, acceleration is given by the equation;
[tex]Acceleration, a = \frac{final \; velocity - initial \; velocity}{time}[/tex]
Substituting into the equation, we have;
[tex]Acceleration, a = \frac{20 - 10}{2}[/tex]
[tex]Acceleration, a = \frac{10}{2}[/tex]
Acceleration, a = 5m/s²
A truck is traveling at 27 m/s down the interstate highway where you are changing a flat tire. frequency of 185 Hz.
A) What frequency do you hear?
B) Suppose after fixing the flat you were driving your car at 22 m/s the truck drives blows his horn again. What frequency do you hear? (Speed of sound in air is 340 mis).
Answer:
(a) the observed frequency is 200 Hz
(b) the observed frequency is 188 Hz.
Explanation:
speed of the truck, Vs = 27 m/s
frequency of the truck as it approaches, Fs = 185 Hz
(a) Apply Doppler effect to determine the frequency you will hear.
As the truck approaches you, the observed frequency will be higher than the source frequency because of decrease in distance.
[tex]F_s = F_o [\frac{V}{V_S + V} ][/tex]
Where;
Fo is the observed frequency which is the frequency you will hear.
V is speed of sound in air
[tex]F_s = F_o [\frac{V}{V_S + V} ]\\\\185 = F_o [\frac{340}{27 + 340} ]\\\\185 = F_o (0.926)\\\\F_o = \frac{185}{0.926}\\\\F_o = 199.78 \ Hz[/tex]
[tex]F_o = 200 \ Hz[/tex]
(b) Apply the following formula for a moving observer and a moving source;
[tex]F_o = F_s[\frac{V-V_o}{V} ](\frac{V}{V-V_S} )[/tex]
The observed frequency is negative since you are driving away from the truck and the source frequency is also negative since it is driving towards you.
[tex]F_o = F_s[\frac{V-V_o}{V} ](\frac{V}{V-V_S} )\\\\F_o = 185[\frac{340-22}{340} ](\frac{340}{340-27} )\\\\F_o = 185(0.9353)(1.0863)\\\\F_o = 188 \ Hz[/tex]
why is it difficult to lift out the bucket form well
because of gravitional pull
A ball of mass 4kg moving with a velocity of 20m/s collides with another ball of mass 15kg moving with a velocity of 15m/s in the same direction. Calculate the velocity of the 5kg ball if the collision is perfectly inelastic.
Answer:
velocity = 16.05 m/s
Explanation:
inelastic collision formula:
m1u1 + m2u2 = (m1 + m2)v
m1 = 4kg
u1 = 20m/s
m2 = 15kg
u2 = 15m/s
find v ?
m1u1 + m2u2 = (m1 + m2)v
(4×20) + (15×15) = (4+15)v
80 + 225 = 19v
305 = 19v
19v = 305
v = 305/19
v = 16.05 m/s
. A pendulum of length l = 9.8 m hangs in equilibrium and is then given velocity
v
=0.2
m/s at its lowest point. What is the amplitude of the subsequent oscillation?
Answer:
the amplitude of the sequence oscillation=
ASO = length × velocity
= 9.8 × 0.2 = 19.6
ASO = 19.6
A has a frequency of 300 Hz and a wavelength of 1.10 m. What is the velocity of the wave?
Hello!!
For calculate the Velocity of the wave let's applicate the formula:
[tex]\boxed{V=f*\lambda}[/tex]
[tex]\textbf{Being:}[/tex]
[tex]\sqrt{}[/tex] V = Velocity = ?
[tex]\sqrt{}[/tex] f = Frequency = 300 Hz
[tex]\sqrt{}[/tex] [tex]\lambda[/tex] = Wavelength = 1,1 m
⇒ [tex]\text{Then let's \textbf{replace it according} we information:}[/tex]
[tex]V = 300 \ Hz * 1,1 \ m[/tex]
⇒ [tex]\text{Let's resolve it: }[/tex]
[tex]V = 330 \ m / s[/tex]
[tex]\textbf{Result:}\\\text{The velocity is \textbf{330 meters per second}}[/tex]
Answer:
For calculate the Velocity of the wave let's applicate the formula:
V = Velocity = ?
f = Frequency = 300 Hz
= Wavelength = 1,1 m
⇒
⇒
Explanation:
Two sacks contain the same number of identical apples and are separated by a distance r. The two
sacks exert a gravitational orce on each other that is opposite in direction but with the same
F. Half the apples are removed from one sack and placed in the second sack. What is the magnitude
the gravitational force between the two sacks in terms of the original force, F?
Answer:
The appropriate response will be "[tex]F_2=\frac{3}{4}F[/tex]". A further explanation is given below.
Explanation:
According to the question,
⇒ [tex]F_1=\frac{G(m_1 m_2)}{r^2}[/tex] ....(equation 1)
and,
⇒ [tex]F_2=\frac{G(m_1 m_2)}{r^2}[/tex] ....(equation 2)
Now,
On dividing both the equations, we get
⇒ [tex]\frac{F_1}{F_2}=\frac{\frac{G(2)(2)}{(1)^2}}{\frac{G(1)(3)}{(1)^2}}[/tex]
⇒ [tex]\frac{F_1}{F_2}= \frac{4}{3}[/tex]
⇒ [tex]F_2=\frac{3}{4}F[/tex]
The magnitude of gravitational force is different due to difference in masses of two sacks.
The magnitude of gravitational force between the two sacks in terms of the original force is different because the mass of the two objects are different from each other. There is direct relationship between gravitational force and mass of an object. Higher the mass of an object higher will be the gravitational force of attraction and vice versa.
So that sack which gains more weight have more force of gravitation as compared to the other sack which has less weight so we can conclude that the magnitude of gravitational force is different due to difference in masses of two sacks.
Learn more about gravitational force here: https://brainly.com/question/24783651
Learn more: https://brainly.com/question/20137348
A fruit bat falls from the roof of a cave. We know that her potential energy was
600 J, and that the roof of the cave was 12.8 meters high. What is her velocity
when she hits the ground?
Answer:
v = 15.65 m/s
Explanation:
We use conservation of mechanical energy between initial (i) and final (f) states:
Pi + KEi = Pf + KEf
At the top of the cave at the instant the bat starts to fall, there is only potential energy since the bat's velocity is zero.
Pi = m g h = 600 J
and the KEi = 0 J (no velocity)
Knowing the height of the cave's roof (12.8 m) , we can find the mass of the bat:
m = 600 J / (g 12.5) = 4.9 kg
Using conservation of mechanical energy, the final state is:
Pf + KEf = 600 J
with Pf = 0 (just touching the ground)
KEf= 1/2 4.9 (v^2)
and we solve for the velocity:
600 J = 0 + 1/2 4.9 (v^2)
v^2 = 600 * 2 / 4.9 = 244.9
v = 15.65 m/s
A little girl pushes a 5.0 kg toy baby stroller at constant speed 7.0 m across the floor. She pushes on the handle with a force of 40 N at an angle of 30o with the horizontal. All parts are 4 points each.
Complete Question
1 a A little girl pushes a 5.0 kg toy baby stroller at constant speed 7.0 m across the floor. She pushes on the handle with a force of 40 N at an angle of 30o with the horizontal. How much work is done by the girl on the wagon?
1b A farmhand pushes 20 ㎏ bale of hay 4m across the floor of the barn if she exerts a horizontal force of 60 N on the hay, how much work is done? (5 pts)
All parts are 4 points each
Answer:
1a
[tex]W = 242.5 \ J[/tex]
1b
[tex]W = 240 \ J[/tex]
Explanation:
Considering question a
From the question we are told that
The mass of the toy baby stroller is [tex]m = 5.0 \ kg[/tex]
The distance covered is [tex]d = 7.0\ m[/tex]
The force the girl applies on the handle is [tex]F = 40 \ N[/tex]
The angle at which this force is applied is [tex]\theta = 30^o[/tex]
Generally the workdone is mathematically represented as
[tex]W = F_x * d[/tex]
Here [tex]F_x[/tex] is the force along the horizontal axis , this is mathematically represented as
[tex]F_x = F cos (\theta )[/tex]
=> [tex]F_x = 40 * cos(30 )[/tex]
=> [tex]F_x = 34.64 \ N[/tex]
So
[tex]W = 34.64 * 7[/tex]
=> [tex]W = 242.5 \ J[/tex]
Considering question b
From the question we are told that
The mass of the toy baby stroller is [tex]m = 20 \ kg[/tex]
The distance covered is [tex]d = 4 \ m[/tex]
The force the girl applies on the handle is [tex]F = 60 \ N[/tex]
Generally the workdone is mathematically represented as
[tex]W = F * d[/tex]
=> [tex]W = 60 * 4[/tex]
=> [tex]W = 240 \ J[/tex]
The technology in the picture produces which energy conversion?
A. Chemical energy to kinetic energy
B. Thermal energy to kinetic energy
C. Light energy to electrical energy
D. Kinetic energy to electrical energy
Answer:
D
Explanation:
because the whole town needs to be powered through some sort of energy and kinetic energy means the movement of something
The technology in the picture represents the conversion of kinetic energy to electrical energy. So, the correct option is D.
What is meant by kinetic energy ?Kinetic energy of a body is defined as the energy acquired by the body due to the virtue of its motion.
Here,
The given picture represents the dam system at a town.
We know, according to conservation of energy, energy can neither be created nor be destroyed, but can be transferred from one form to another.
In the dam system, the application of conservation of energy is implemented.
Dam consists of a water stream and turbines. The water stream is arranged in such a way that, when the water is running from a height, the water acquires an energy in the form of kinetic energy.
This kinetic energy of the water is converted to electrical energy with the help of the turbines, which are rotating continuously and thus electricity is produced.
Hence,
The technology in the picture represents the conversion of kinetic energy to electrical energy.
To learn more about kinetic energy, click:
https://brainly.com/question/999862
#SPJ7
(kg)
The table shows the relationship between the masses of two objects, the distance between the
two objects, and the gravitational force between the objects
Mass
of Object 1 Mass of Object 2 Distance between Gravitational
(kg)
Objects 1 and 2 Force between
(m)
Objects 1 and 2
(N)
1
16
2G
2
1 G
3
3
9 G
9
3
3
3G
1
2
1
6. Which conclusion is supported by the data in the table? (1 point)
An increase in the mass of an object causes the same decrease in the gravitational force
An increase in the distance between the objects causes the same decrease in the gravitational force
An increase in the distance between the objects causes a greater change in the gravitational force than the same increase in mass.
An increase in the mass causes a greater change in the gravitational force than the same increase in the distance between the objects
Answer:
(C) an increase in tue distance between the ibject causes a greater change in the gravitational force than the same increase in mass
Hope this helps
Answer:
C: An increase in the distance between the objects causes a greater change in the gravitational force than the same increase in mass.
Explanation:
it's C on edge! hope this helps!!~ (❁´▽`❁)*✲ﾟ*
What is the main difference between analog anddigital technology?a. Digital technology reproduces sound more faithfullythan analog technology.b. Analog technology stores information as soundwaves; digital technology stores it as strings of onesand zeroes.c. Analog technology can be used to record sound andimages; digital technology can only be used to recordsound.d. Analog technology is based on binary code; digitaltechnology is based on electromagnets
Answer:
Answer b)
Explanation:
The correct answer is that analog technology stores information as sound-waves, while digital technology stores it as strings of ones and zeroes. So pick answer b)
As a woman walks, her entire weight is momentarily placed on one heel of her high-heeled shoes. Calculate the pressure exerted on the floor by the heel if it has an area of 1.60 cm2 and the woman's mass is 54.0 kg. Express the force in N/m2 and lb/in2. (In the early days of commercial flight, women were not allowed to wear high-heeled shoes because aircraft floors were too thin to resist such large pressures.)
Answer:
P = 3.3075 x 10⁶ N/m² = 479.71 lb/in²
Explanation:
In order to find the pressure , we first need to find the force exerted by the lady. The force must be equal to the weight of the lady:
Force = F = Weight = mg
F = mg = (54 kg)(9.8 m/s²)
F = 529.2 N
Now, we convert area to S.I unit:
Area = A = (1.6 cm²)(1 m/100 cm)²
A = 1.6 x 10⁻⁴ m²
Now, the pressure can be calculated as:
Pressure = P = F/A
P = 529.2 N/1.6 x 10⁻⁴ m²
P = 3.3075 x 10⁶ N/m²
Now, we convert this into lb/in²:
P = (3.3075 x 10⁶ N/m²)[(0.000145038 lb/in²)/(1 N/m²)
P = 479.71 lb/in²
A certain electrical circuit contains a battery with three cells, wires, and a light bulb. Which of the following would cause the bulb to shine less brightly?
A. decrease the resistance of the circuit
B. increase the resistance of the circuit
Physical science deals with the ... of matter
how do you determine half life
Answer:
T= In(2)/___ =__ In(2)
Explanation:
the equation pices arnt on the keyboard so i put the blanks
sorry
jope it helps some. Have a good day ir night! :)
Which would best help a student determine the net force acting on a rollercoaster car as it moves from one point on its track to another?
Answer:
you can show them a vid
Explanation:
The index of refraction of quartz is anisotropic. Suppose that visible light is passing from one grain to another of different crystallographic orientation and at normal incidence to the grain boundary. Calculate the reflectivity at the boundary if the indices of refraction for the two grains are 1.545 and 1.555 in the direction of light propagation. Enter your answer in accordance to the question statement
Answer:
1.04*10⁻⁵
Explanation:
light wave do showcase some behaviors whenever there is encounters with the end of the medium, some of the behaviors are - reflection, refraction, as well as diffraction. When visible light wave strikes a boundary that exist two different media, a portion of the energy will be transmitted into the new medium and some reflected.
Reflection of a light wave can be regarded as bouncing off of light wave from boundary. refraction on other hand is bending of the path of a light wave.
We were to calculate the reflectivity at the boundary,
reflectivity at the boundary can be calculated using the expression below
Reflectivity= (n₂ - n₁)² /(n₂ + n₁ ) ²
where
n₁= Indices of refraction at first grain= 1.545
n₂= Indices of refraction at second grain=
1.555
(1.555 - 1.545)² / (1.555 - 1.545)²
=(0.01)²/ (3.1)²
= 0.0001/ 9.61
= 1.04*10⁻⁵
Hence, the reflectivity at the boundary if the indices of refraction for the two grains are 1.545 and 1.555 in the direction of light propagation is 1.04*10⁻⁵
A stunt person jumps from the roof of a tall building, but no injury occurs because the person lands on a large, air-filled bag. Which one of the following best describes why no injury occurs?
A. The bag increases the amount of time during which the momentum is changing and reduces the average force on the person.
B. The bag increases the amount of time the force acts on the person and reduces the change in momentum.
C. The bag reduces the impulse to the person.
D. The bag provides the necessary force to stop the person.
E. The bag decreases the amount of time during which the momentum is changing and reduces the average force on the person.
Answer:
A stunt person jumps from the roof of a tall building, but no injury occurs because the person lands on a large, air-filled bag. Which one of the following best describes why no injury occurs?
The bag increases the amount of time during which the momentum is changing and reduces the average force on the person.
ANSWER: A
Answer:
A. The bag increases the amount of time during which the momentum is changing and reduces the average force on the person.
During stunts, people usually put an-air filled bag on the ground for safe landing and to prevent injuries.
Momentum is calculated by m* v where m is for mass and v is for velocity.
Force is directly proportional to momentum
F∝M
The bag in this scenario helps to increases the amount of time the force acts on the person. This implication means that there is a reduction in the change of momentum. Since Force and momentum have a directly proportional relationship then the Force taken to hit the floor is greatly reduced.
Read more on https://brainly.com/question/20362316
PLEASE HELP! what kind of electricity does electrical heat burners make
Answer:
Electrical to Thermal
Mark all the units for speed
Answer:
Speed. I am speed.
Explanation:
The FitnessGram Pacer Test is a multistage aerobic capacity test that progressively gets more difficult as it continues. The 20 meter pacer test will begin in 30 seconds. Line up at the start. The running speed starts slowly, but gets faster each minute after you hear this signal. A single lap should be completed each time you hear this sound. Remember to run in a straight line, and run as long as possible.
10) The coil of transformer is coated by enamel why
Answer:
Enamel is used to coat the wires, it is the thinnest possible insulator. The coils are made up of large number of turns and enamel makes it possible to cram a lot of wires (coils) in much smaller space.
You have to move your 100 N couch before a delivery company drops off your new one. Unfortunately your roommate is passed out on it. The coefficient of friction between the couch and floor is .43. It takes 250 N of force to get the couch moving. a) How much does your roommate weigh in Newton’s? b) After you get the couch moving it only takes 200 N to keep it moving at a constant speed, what is the coefficient of kinetic friction?
Answer:
a) Weight of Roommate = 481.4 N
b) μk = 0.34
Explanation:
a)
The force required to move the couch must be equal to the force of friction:
F = frictional force
F = μW
W = F/μ
where,
W = Total Weight of Couch and Roommate
F = Force Required start to move couch = 250 N
μ = coefficient of static friction between couch and floor = 0.43
Therefore,
[tex]W = \frac{250 N}{0.43}\\\\W = 581.4 N[/tex]
So, the total weight is given as:
W = Weight of Couch + Weight of Roommate
Weight of Roommate = W - Weight of Couch
Weight of Roommate = 581.4 N - 100 N
Weight of Roommate = 481.4 N
b)
Now, the force required to keep the couch moving can be given as equal to the kinetic friction force:
F = kinetic friction
F = μk*W
μk = F/W
where,
μk = coefficient of kinetic friction = ?
F = Force required to keep the couch moving = 200 N
Therefore,
μk = 200 N/581.4 N
μk = 0.34