if ther are no external forces, what is always true for objects during all types of collisions

Answers

Answer 1

If there are no external forces, the total momentum of the objects is always conserved during all types of collisions.

Collisions are classified into two types based on the external forces that act on them: elastic and inelastic collisions. In an elastic collision, the kinetic energy of the objects is conserved, whereas in an inelastic collision, the kinetic energy is not conserved. However, in both types of collisions, if there are no external forces acting on the system, the total momentum of the objects is always conserved.

Conservation of momentum means that the total momentum of the objects before the collision is equal to the total momentum of the objects after the collision. This law applies to all types of collisions, including elastic and inelastic collisions. The conservation of momentum principle is essential for solving problems related to collisions and is a fundamental principle in physics.

Learn more about collisions here:

https://brainly.com/question/29569193

#SPJ11


Related Questions

what will the value of each element in mystery be after the execution of the code segment?

Answers

It is impossible to determine the value of each element force in the mystery list without knowing its initial value and the content of the file mystery.txt.

In the provided code segment, the first line of the `with` block specifies that a file named "mystery.txt" should be opened for reading. Next, the file object's `readlines` method is called, which returns a list of strings representing each line in the file. This list is assigned to a variable named `mystery`.After this point, we don't know the contents of the file or the initial value of the `mystery` list. The rest of the code segment simply prints out each element in the list one by one, separated by commas and enclosed in square brackets.

It is impossible to determine the value of each element in the `mystery` list without additional information. However, we can make some educated guesses based on the code that we see.The code reads in a file named "mystery.txt" and assigns its contents to a list named `mystery`. We don't know the contents of the file, but we can assume that each line in the file represents an element in the `mystery` list based on the `readlines` method.Each element in the `mystery` list is then printed out one by one using a `for` loop and the `print` function. We don't know what the elements are, but we can assume that they are strings based on the fact that they are enclosed in quotes in the `print` statement.

To know more about force visit:

https://brainly.com/question/30507236

#SPJ11

how many protons, neutrons, and electrons are present in the following: 133xe

Answers


133xe is the chemical symbol for Xenon-133, an isotope of Xenon. It has 54 protons, 79 neutrons, and 54 electrons.


Xenon-133 has 54 protons, which determines its atomic number and chemical properties. It also has 79 neutrons, which contributes to its atomic mass. The electrons in Xenon-133 are arranged in energy levels around the nucleus, and there are 54 of them. The number of electrons is equal to the number of protons in a neutral atom. Knowing the number of protons, neutrons, and electrons in an atom is important for understanding its properties and behavior, such as its reactivity with other elements.


To summarize, Xenon-133 has 54 protons, 79 neutrons, and 54 electrons. These three subatomic particles play important roles in determining the properties and behavior of an atom.

To know more about electrons visit:

brainly.com/question/12001116

#SPJ11

what is the 2nd minimum thickness of film required? assume that the wavelength of the light in air is 470 nanometers.

Answers

The second-order minimum thickness of the film required is 1.41 μm.

The minimum thickness required for a thin film to reflect a given color is half the wavelength of the light in the film material. For a second-order minimum thickness, the formula is given by;

t2=2nλwhere t2 represents the second-order minimum thickness of the film, n is the refractive index of the film material, and λ is the wavelength of the light in air.

If the wavelength of the light in air is 470 nm, then the second-order minimum thickness of the film required is given by;t2=2nλ= 2 × 1.5 × 470 nm = 1410 nm = 1.41 μm.

The second-order minimum thickness of the film required is 1.41 μm.

To know more about wavelength visit:

brainly.com/question/31143857

#SPJ11

a ball is thrown vertically upward with an initial velocity of feet per second. the distance s (in feet) of the ball from the ground after t seconds is:_____

Answers

the distance s (in feet) of the ball from the ground after t seconds can be calculated using the formula s = -16t^2 + vt, where v is the initial velocity of the ball in feet per second.  the derivation of the formula s = -16t^2 + vt. This formula is based on the fact that the acceleration.


When a ball is thrown vertically upward, it initially moves upward against the force of gravity until it reaches its maximum height. At this point, the ball momentarily stops moving upward and starts to fall back down due to the force of gravity. The time it takes for the ball to reach its maximum height is given by t = v/32. To calculate the maximum height of the ball, we can substitute t = v/32 into the formula s = -16t^2 + vt and simplify to get s = v^2/64.  Finally, to find the distance s (in feet) of the ball from the ground after t seconds, we can use the formula s = -16t^2 + vt, where v is the initial of the ball in feet per second.


the formula s = -16t^ 2 + vt is derived based on the constant acceleration due to gravity and the motion of a ball thrown vertically upward. This formula can be used to calculate the distance of the ball from the ground after t seconds.When a ball is thrown vertically upward with an initial velocity (v₀) in feet per second, the motion of the ball can be described using the equation s(t) = v₀t - (1/2)gt² s(t) represents the distance of the ball from the ground after t seconds.  v₀ is the initial velocity in feet per second.  t is the time in seconds.  g is the acceleration due to gravity, which is approximately 32.2 ft/s². To find the distance of the ball from the ground after t seconds, simply plug in the values for the initial velocity (v₀) and the time (t) into the formula and calculate the result.

To know more about acceleration Visit ;

https://brainly.com/question/2303856

#SPJ11

Consider two cylindrical conductors made of the same ohmic material. If rho2 = rho1 , r2 = 2 r1 , ℓ2 = 3 ℓ1 , and V2 = V1 , find the ratio R2 R1 of the resistances'

Answers

Two cylindrical conductors made of the same ohmic material. If ρ₂ = ρ₁, r₂ = 2 r₁ , ℓ₂ = 3 ℓ₁ , and V₂ = V₁ , the ratio R₂ / R₁ of the resistances is 3 / 4.

The resistance of a cylindrical conductor is given by the formula:

R = (ρ * ℓ) / A

where ρ is the resistivity of the material, ℓ is the length of the conductor, and A is the cross-sectional area of the conductor.

Let's denote the properties of the first conductor as ρ₁, r₁, ℓ₁, and the properties of the second conductor as ρ₂, r₂, ℓ₂.

Given that:

ρ₂ = ρ₁

r₂ = 2r₁

ℓ₂ = 3ℓ₁

V₂ = V₁

To find the ratio R₂/R₁ of the resistances,

For the first conductor:

R₁ = (ρ₁ * ℓ₁) / A₁

For the second conductor:

R₂ = (ρ₂ * ℓ₂) / A₂

The cross-sectional areas A₁ and A₂ in terms of the radii r₁ and r₂:

A₁ = π * r₁²

A₂ = π * r₂²

Substituting the given values, we have:

A₂ = π * (2r₁)² = 4πr₁²

Now, let's substitute the expressions for A₁ and A₂ into the resistance formulas:

R₁ = (ρ₁ * ℓ₁) / (π * r₁²)

R₂ = (ρ₂ * ℓ₂) / (4πr₁²)

Since ρ₂ = ρ₁ and V₂ = V₁, the resistances can be written as:

R₁ = (ℓ₁) / (π * r₁²)

R₂ = (ℓ₂) / (4πr₁²)

Now, let's find the ratio R₂/R₁:

(R₂/R₁) = [(ℓ₂) / (4πr₁²)] / [(ℓ₁) / (π * r₁²)]

= (ℓ₂ / ℓ₁) / 4

= (3ℓ₁ / ℓ₁) / 4

= 3 / 4

Therefore, the ratio R₂/R₁ of the resistances is 3/4.

To know more about resistances here

https://brainly.com/question/32301085

#SPJ4

determine the tension developed in the cable when s = 15 m .

Answers

the tension developed in the cable when s = 15 m will depend on the specific system in a Without additional of the information  the factors that determine tension in a cable. The tension in a cable is affected by the weight of the object being supported.


To determine the tension in a cable when s = 15 m, you would need to have more information about the the weight being supported, the angle of suspension, and any other forces acting on the system. You need to find the tension (T) in the cable Analyze the problem and determine any additional information needed.  In order to calculate the tension, we will need more information about the cable and the forces acting on it, such as the mass of the object, the angle of the cable, and any external forces. Once you have the required information, you can proceed with solving for the tension in the cable.

Without additional information about the cable and forces acting on it, it is not possible to calculate the tension developed in the cable when s = 15 m. To determine the tension in the cable, additional information about the system and forces is needed. Once that information is available, you can use appropriate formulas and calculations to find the tension in the cable. The tension in a cable is dependent on factors such as the mass of the object, the angle of the cable, and any external forces acting on the system. Without this information, it is not possible to accurately calculate the tension developed in the cable when s = 15 m.

To know more about object Visit;

https://brainly.com/question/26803517

#SPJ11

what is the direct source of energy that powers molecular motors (such as myosin or dynein or kinesin)?

Answers

The direct source of energy that powers molecular motors (such as myosin or dynein or kinesin) is ATP or Adenosine triphosphate.

ATP or Adenosine triphosphate is the direct source of energy that powers molecular motors such as myosin, dynein, or kinesin. These molecular motors help in transporting vital molecules around cells, which is essential for cellular processes such as muscle contraction, intracellular transport, and more. In biological systems, the energy that is harnessed from ATP hydrolysis drives several cellular processes and events.

ATP hydrolysis provides the energy to activate molecular motors like kinesin, myosin, and dynein that perform different functions like the contraction of muscles, movement of chromosomes, transport of organelles, and more.The molecule of ATP is hydrolyzed, and the energy is released when ATP is used as an energy source for molecular motor proteins. This energy is then utilized by molecular motors like myosin, dynein, or kinesin to perform their biological functions. Thus, ATP acts as a fuel for the functioning of molecular motors.

To know more about energy  visit :

https://brainly.com/question/1932868

#SPJ11

the pressure 35.0 m under water is 445 kpa. what is this pressure in atmospheres (atm)?

Answers

the pressure of 35.0 m under water, which is 445 kPa, is equal to approximately 4.38 atmospheres (atm) it is important to understand the concept of pressure and its units of measurement. Pressure is defined as the force per unit area exerted fluid or gas on a surface.

In this case, the pressure of 35.0 m under water is given in kPa. To convert this to atm, we need to use the conversion factor of 1 atm = 101.3 kPa. Therefore, we can calculate the pressure in atm as 445 kPa / 101.3 kPa/atm = 4.38 atm rounded to two decimal places .

the pressure of 35.0 m under water is equivalent to 4.38 the pressure of 445 kPa to atmospheres (atm) at 35.0 m underwater, follow these steps  you need to know the conversion factor between kPa and atm. 1 atm is equal to 101.325 kPa.  Next divide the pressure in kPa (445 kPa) by the conversion factor (101.325 kPa/atm) 445 kPa / 101.325 kPa/atm = 4.38 atm the pressure 35.0 m underwater is 4.38 atm.

To know more about surface Visit;

https://brainly.com/question/32235761

#SPJ11

(1).___________ measurement refers to the measurement that can directly measure the value of a physical quantity
with instruments or measuring tools ___________measurement refers to
the measurement of a physical quantity that can be obtained only after mathematical
operation.

Answers

Direct measurement refers to the measurement that can directly measure the value of a physical quantity with instruments or measuring tools.

Indirect measurement refers to the measurement of a physical quantity that can be obtained only after mathematical operations.

Direct measurement involves using a measuring instrument or tool to directly obtain the value of a physical quantity.

For example, using a ruler to measure the length of an object, or using a thermometer to measure the temperature of a substance.

The measurement obtained is a direct representation of the quantity being measured.

Indirect measurement, on the other hand, requires additional mathematical operations or calculations to determine the value of a physical quantity.

This can involve measuring other related quantities and using mathematical formulas or equations to derive the desired quantity.

For instance, calculating the volume of an irregularly shaped object by measuring its dimensions and applying the appropriate formula.

Direct measurement provides a straightforward and immediate result, as it directly measures the physical quantity using instruments or tools.

Indirect measurement requires additional steps and calculations to obtain the desired quantity, making it a more involved process.

Both direct and indirect measurement methods have their applications and usefulness in various scientific and practical contexts.

To know more about measurement  visit:

https://brainly.com/question/777464

#SPJ11

what value does the image distance approach as the object distance becomes larger and what is the significance in this value

Answers

As the object distance becomes larger, the image distancelens's focal length approaches the focal length of the lens. This is known as the thin lens equation, which is 1/f = 1/do + 1/di, where f is the focal length, do is the object distance, and di is the image distance.

This value is significant because it allows us to predict the behavior of lenses and their ability to form images. It also helps us determine the magnification of the image produced by the lens. The closer the image distance is to the focal length, the larger the magnification will be. As the object distance becomes infinitely large, the image distance approaches the focal length, which means that the image formed will be infinitely small and located at the focal point.

Understanding the behavior of lenses and the thin lens equation is essential in various fields, including optics, photography, and medicine. Knowing how to predict the behavior of lenses can help us optimize the performance of optical systems and ensure that they meet specific requirements.

To know more about lens equation visit:

brainly.com/question/2264507

#SPJ11

what volume of water can vaporize at room temperature given 150.0 kj of energy? (for water, δhvap=44.01kjmol) select the correct answer below: 0.28 ml 14.2 ml 61.3 ml 98.9 ml

Answers

The amount of energy required to vaporize one mole of a substance at its boiling point is referred to as the molar heat of vaporization, which is given the symbol ΔHvap.

The boiling point of a substance is the temperature at which its vapor pressure equals atmospheric pressure. The water's molar heat of vaporization is 44.01 kJ/mol. Let's calculate the number of moles of water which can be vaporized using the energy of 150.0 kJ.

Mass of one mole of water = 18.01528 g/molNumber of moles of water that can be vaporized = 150.0 kJ ÷ (44.01 kJ/mol)≈ 3.408 mol One mole of water takes up 18.01528 mL of volume (at 1 atm, 25°C).Hence, Volume of water which can be vaporized = 3.408 × 18.01528 mL ≈ 61.3 mL.Therefore,  61.3 ml. Explanation: The calculation is shown above.

to know more about energy visit :

https://brainly.com/question/2409175

#SPJ11

1. what is the frequency of visible light having a wavelength of 486 nm.

Answers

The frequency of visible light with a wavelength of 486 nm can be calculated using the formula: frequency = speed of light / wavelength. The speed of light is a constant value of approximately 3.00 x 10^8 meters per second. We need to convert the wavelength from nanometers to meters by dividing it by 1 billion.

Therefore, the wavelength of 486 nm becomes 4.86 x 10^-7 meters. Plugging in these values into the formula gives us a frequency of approximately 6.17 x 10^14 Hz. This means that the light with a wavelength of 486 nm has a frequency of 6.17 x 10^14 oscillations per second.

To know more about wavelength visit :-

https://brainly.com/question/31143857

#SPJ11

the time constants for a series rc circuit with a capacitance of 4.50 µf and a series rl circuit with an inductance of 3.80 h are identical. (a) what is the resistance r in the two circuits?

Answers

The time constant (τ) for a series RC circuit is given by the formula τ = RC, where R is the resistance and C is the capacitance. Similarly, the time constant for a series RL circuit is given by the formula τ = L/R, where L is the inductance and R is the resistance.

Since the time constants for both circuits are identical, we can equate the two formulas and solve for R:

τ(RC) = RC = τ(RL) = L/R

Multiplying both sides by R, we get:

RC² = L

Substituting the given values of C and L, we get:

(4.50 µF)² R = 3.80 H

Solving for R, we get:

R = 3.80 H / (4.50 µF)²

R ≈ 1.26 kΩ

Therefore, the resistance (R) in both circuits is approximately 1.26 kΩ.

To know more about resistance, visit:

https://brainly.com/question/29520222

#SPJ11

find the dimensions of a rectangle with an area of square feet that has the minimum perimeter.

Answers

To find the dimensions of a rectangle with an area of square feet that has the minimum perimeter, we need to use the formula for the perimeter of a rectangle, which is P=2l+2w. Let's call the length of the rectangle l and the width w. The area of the rectangle is lw.

We want to minimize the perimeter, so we need to find the minimum value of P in terms of l and w. Using the area formula, we can solve for w: w= A/l. Substituting this into the perimeter formula, we get P= 2l + 2(A/l). To minimize P, we need to take the derivative of P with respect to l and set it equal to 0. Doing this, we find that l=sqrt(A), and w=sqrt(A). Therefore, the rectangle with the minimum perimeter that has an area of A square feet is a square with side length sqrt(A).

To know more about perimeter visit :-

https://brainly.com/question/30252651

#SPJ11

required informationskip to questionin the circuit given below, r1 = 2 ω and r2 = 8 ω. note: this is a multi-part question. once an answer is submitted, you will be unable to return to this part.

Answers

The equivalent resistance of the circuit is 10Ω.

The given circuit contains two resistors, R1 and R2 with their values of resistance 2Ω and 8Ω respectively. To calculate the equivalent resistance of the circuit, we need to use the formula of series resistance.

The formula of equivalent resistance in a series circuit is: Req = R1 + R2 + ……. + Rn Where, Req is the equivalent resistance of the circuit. R1, R2, ….., Rn are the resistances of the circuit. The equivalent resistance of the given circuit can be calculated as follows: Req = R1 + R2 = 2Ω + 8Ω= 10Ω. Thus, the equivalent resistance of the given circuit is 10Ω.

Learn more about equivalent resistance here:

https://brainly.com/question/31788815

#SPJ11

A 230 v mains powered electrical drill draws a current of 2.5 A calculate the power of the drill at use

Answers

The power drill is 575 watts

A concave mirror has a focal length of 44.5 cm. A real object is placed 30.2 cm in front of the mirror. How far is the image located from the mirror? ........ cm. (please give answer as a positive value) Which side of the mirror is the image located on? cm. In front of the mirror Behind the mirror

Answers

The image is located 66.16 cm behind the mirror.

The focal length of a concave mirror is given as f = -44.5 cm. The object distance is given as u = -30.2 cm since the object is placed in front of the mirror. The mirror formula is given as 1/f = 1/v + 1/u where v is the image distance from the mirror. We will substitute the values we have:1/-44.5 = 1/v + 1/-30.2.

Solving for v, we get: v = -66.16 cm. Since the value of v is negative, this means that the image is located behind the mirror. The negative value of v indicates that the image is formed behind the mirror. Thus, the image is located 66.16 cm behind the mirror.

Learn more about mirror formula here:

https://brainly.com/question/8512677

#SPJ11

Can someone help please

Answers

When the switch is closed, the current flows through the circuit and creates the magnetic field, so that the bar moves towards the right. Hence, option B is correct.

The current in the conductor is because of the moving charge. Changing the current in the circuit produces the magnetic field. The unit of the magnetic field is Tesla.

From the given, When the switch is closed, the current flows through the circuit. The battery in the circuit produces the electromotive force(ε). The emf in the battery makes the electrons move and hence, the current flows through the conductor.

When current enters the circuit, the magnetic field is produced in the conductor. The current flows in a clockwise direction(from top to bottom of the conductor) that makes the bar move toward the right.

Hence, the ideal solution is option B.

To learn more about the magnetic field:

https://brainly.com/question/30331791

#SPJ1

Problem Solving: Solve for the number of book stacks needed to satisfy given Reverberation Time (R.) in a closed room library. Find intensity in Decibel Scale. The library's floor area with a radius of 60 feet and 10 feet high. The library has two (2) glass doors with a dimension of 3 feet wide and 7 feet height. The absorption coefficient of the following materials (A.) are as follows: Glass at 0.025; Plywood ceiling at 0.033; Stack wood without books at 0.17; Stack of books with books at 0.40. The reverberation time is 0.05 seconds. As Floor Tile is 0.03. As for Concrete Wall is 0.04.
Required: Solve for the number of Book stack. and Take note that a Book Stack is actually a book shelves.
Hints. To Solve for the number of Book stack you will be needing these sets of formulas to decode the problem.

Formulas: R₁ = 0.049 V/A,, English system
A₁ = (Number of Book Stacks) (Maintenance Factor)

Note: Get the ratio of the A, Stack with books and A, Stack without books .This will serve as a multiplying Factor (MF).

A, Ratio Stack = A, Stack with Book / A, Stack without Book

Note: The Stack or Book Shelves is 5 feet high. Discard the Width of the Book Shelve it is open ended front till back. It only has base to carry the books. It has no partitions or shelves but it has boards that carries the individual level of books.

Answers

Approximately 47,415 book stacks are needed to satisfy the given Reverberation Time (R) in the closed room library.

To solve for the number of book stacks needed to satisfy the given Reverberation Time (R) in the closed room library, we will use the following formulas:

1. A₁ = (Number of Book Stacks) × (Maintenance Factor)

2. A, Ratio Stack = A, Stack with Books / A, Stack without Books

3. R₁ = 0.049 × (Volume of the room) / A

First, let's calculate the volume of the room:

Volume = floor area × height

Volume = π × (60 ft)^2 × 10 ft

Volume ≈ 113,097 ft³

Now, let's calculate the absorption coefficient for the different materials:

A, Stack without Books = 0.17

A, Stack with Books = 0.40

A, Ratio Stack = 0.40 / 0.17

A, Ratio Stack ≈ 2.35

Next, we can calculate the required absorption coefficient (A₁) using the reverberation time formula:

R₁ = 0.049 × Volume / A₁

Given that R₁ = 0.05 seconds, we can rearrange the formula to solve for A₁:

A₁ = 0.049 × Volume / R₁

A₁ ≈ 0.049 × 113,097 ft³ / 0.05 s

A₁ ≈ 111,288 ft²·s

Now, we can calculate the number of book stacks needed (Number of Book Stacks):

Number of Book Stacks = A₁ / (A, Ratio Stack)

Number of Book Stacks ≈ 111,288 ft²·s / 2.35

Number of Book Stacks ≈ 47,415

Therefore, approximately 47,415 book stacks are needed to satisfy the given Reverberation Time (R) in the closed room library.

To find the intensity in the decibel scale, we would need additional information such as the source power or sound pressure levels. The given information does not allow us to calculate the decibel scale intensity.

To know more about  Reverberation Time visit:

https://brainly.com/question/28029112

#SPJ11

an electric motor rotating a workshop grinding wheel at 1.04 102 rev/min is switched off. assume the wheel has a constant negative angular acceleration of magnitude 1.94 rad/s2.

Answers

the wheel rotates by approximately 4.79 revolutions before coming to a complete stop.

When the electric motor is switched off, the workshop grinding wheel continues to rotate due to its inertia. However, the wheel experiences a constant negative angular acceleration of magnitude 1.94 rad/s^2, which means that its angular velocity decreases over time. The initial angular velocity of the wheel is 1.04 x 10^2 rev/min, which is equivalent to 10.89 rad/s. To find out how long it takes for the wheel to come to a complete stop, we can use the following kinematic equation:

ωf^2 = ωi^2 + 2αΔθ

where ωf is the final angular velocity, ωi is the initial angular velocity, α is the angular acceleration, and Δθ is the angular displacement.

Since the wheel is coming to a complete stop, its final angular velocity is zero. Thus, we can rearrange the equation to solve for Δθ:

Δθ = (ωf^2 - ωi^2) / 2α

Plugging in the values, we get:

Δθ = (0 - 10.89^2) / (2 x -1.94) = 30.10 rad

Therefore, the wheel rotates by 30.10 radians before coming to a complete stop. To convert this to revolutions, we can use the formula:

1 revolution = 2π radians

So the wheel rotates by:

30.10 / (2π) = 4.79 rev

Thus, the wheel rotates by approximately 4.79 revolutions before coming to a complete stop.

learn more about angular velocity here

https://brainly.com/question/29342095

#SPJ11

Current flows to the right through the wire shown in the picture below. A bar magnet is held near the wire so that the south pole of the magnet faces the wire. i SN What can we say about the force exerted on the wire by the magnet? O The magnet exerts a downward force on the wire O The magnet exerts a force on the wire that points into the page The magnet exerts an upward force on the wire The magnet does not exert a force on the wire O The magnet exerts a force on the wire that points out of the page

Answers

When current flows to the right through the wire, and a bar magnet is held near it with the south pole facing the wire, there will be a magnetic interaction between them.

According to the right-hand rule, when you point your thumb in the direction of the current and curl your fingers, they will indicate the direction of the magnetic field around the wire. In this case, the magnetic field will be going into the page above the wire and coming out of the page below the wire. Since the south pole of the magnet is facing the wire, the magnetic field lines will interact, causing an attractive force between the wire and the magnet.

Therefore, the magnet exerts an upward force on the wire.

To know more about current flows visit:-

https://brainly.com/question/15912115

#SPJ11

how do you adjust the amount of light when viewing a slide through the microscope

Answers

A microscope is a scientific instrument used for magnifying and observing small objects .To adjust the amount of light when viewing a slide through a microscope

Locate the light source: Identify the light source of your microscope. It is usually located at the base of the microscope.

Adjust the intensity: Many microscopes have a control knob or lever that allows you to adjust the intensity of the light. This control may be labelled as "Light Intensity" or similar. Turn the knob or move the lever to increase or decrease the intensity of the light.

Use the diaphragm: Some microscopes have a diaphragm located beneath the stage or near the light source. The diaphragm controls the size of the aperture, which affects the amount of light passing through the slide. Adjust the diaphragm to open or close the aperture and regulate the light.

Learn more about "Light Intensity" here ;

https://brainly.com/question/31790670

#SPJ11

A 9.0V battery supplies a 2.5mA current to a circuit for 5.0hr.

a.) How much charge has been transferred from the negative tothe positive terminal?

b.) How much work has been done on the charges that passedthrough the battery?

Answers

a.) To calculate the charge transferred from the negative to the positive terminal, we can use the formula Q = I x t, where Q is the charge, I is the current, and t is the time. In this case, the current is 2.5mA, which is 0.0025A, and the time is 5.0 hours, which is 18000 seconds. Therefore, Q = 0.0025 x 18000 = 45 C (Coulombs).

b.) To calculate the work done on the charges that passed through the battery, we can use the formula W = V x Q, where W is the work done, V is the voltage and Q is the charge. In this case, the voltage is 9.0V and the charge is 45 C, which we calculated in part a. Therefore, W = 9.0 x 45 = 405 J (Joules).

In summary, the charge transferred from the negative to the positive terminal of the 9.0V battery is 45 C and the work done on the charges that passed through the battery is 405 J.

Here's a step-by-step explanation for both parts:

a.) To find the charge transferred, we'll use the formula Q = I × t, where Q is the charge, I is the current, and t is the time.
1. Convert the given values to the appropriate units: Current (I) = 2.5 mA = 0.0025 A and Time (t) = 5.0 hr = 18000 s (since 1 hr = 3600 s).
2. Now, use the formula Q = I × t: Q = 0.0025 A × 18000 s = 45 C (Coulombs).

So, 45 Coulombs of charge have been transferred from the negative to the positive terminal.

b.) To find the work done, we'll use the formula W = Q × V, where W is the work, Q is the charge, and V is the voltage.
1. We already know Q = 45 C and V = 9.0 V.
2. Use the formula W = Q × V: W = 45 C × 9.0 V = 405 J (Joules).

So, 405 Joules of work have been done on the charges that passed through the battery.

To know more about charge and work visit

https://brainly.com/question/31425911

SPJ11

B. What is the angle of the shock wave relative to the direction of motion?

Answers

The angle of the shock wave relative to the direction of motion depends on several factors, including the speed of the object creating the shock wave, the properties of the medium through which it is traveling, and the angle at which it is approaching the medium.

In general, the shock wave will be at an angle to the direction of motion, with a steeper angle indicating a more intense shock wave. This can be seen in the characteristic cone shape of a sonic boom or other shock waves. The exact angle of the shock wave can be calculated using mathematical models and equations based on the physical properties of the system.

In some cases, such as with certain types of supersonic aircraft, the shock wave can be intentionally shaped or manipulated to reduce its intensity or improve performance.

To know  more about wave visit:-

https://brainly.com/question/25954805

#SPJ11

A 0.500-kg glider, attached to the end of an ideal spring with force constant k=450 n/m, undergoes simple harmonic motion with an amplitude 0.040 m.
A- Compute the maximum speed of the glider.
B- Compute the speed of the glider when it is at x= -0.015 m .
C- Compute the magnitude of the maximum acceleration of the glider.
D- Compute the acceleration of the glider at x= -0.015 m .
E- Compute the total mechanical energy of the glider at any point in its motion.

Answers

The maximum speed of the glider is 1.697 m/s.

The speed of the glider when it is at x = -0.015 m is approximately 1.561 m/s.

The magnitude of the maximum acceleration of the glider is 71.63 m/s².

The acceleration of the glider at x = -0.015 m is approximately -9.086 m/s².

The total mechanical energy of the glider at any point in its motion is 0.36 J.

A- To compute the maximum speed of the glider, we can use the equation:

vmax = ωA,

where vmax is the maximum speed,

ω is the angular frequency, and

A is the amplitude. The angular frequency can be determined using the formula:

ω = √(k/m),

where k is the force constant and m is the mass.

Substituting the given values:

k = 450 N/m and m = 0.500 kg,

we have

ω = √(450 N/m / 0.500 kg) = 42.43 rad/s.

Finally, plugging in the amplitude

A = 0.040 m,

we get vmax = 42.43 rad/s * 0.040 m = 1.697 m/s.

B- The speed of the glider when it is at x = -0.015 m can be determined using the equation:

v = ω√(A² - x²).

Substituting the given values:

ω = 42.43 rad/s,

A = 0.040 m, and

x = -0.015 m,

we have

v = 42.43 rad/s * √(0.040 m² - (-0.015 m)²) = 1.561 m/s.

C- The magnitude of the maximum acceleration of the glider is given by amax = ω²A.

Using the given values:

ω = 42.43 rad/s and A = 0.040 m,

we can calculate amax = (42.43 rad/s)² * 0.040 m = 71.63 m/s².

D- The acceleration of the glider at x = -0.015 m can be found using the equation: a = -ω²x.

Plugging in the values:

ω = 42.43 rad/s and x = -0.015 m,

get a = -(42.43 rad/s)² * (-0.015 m) = -9.086 m/s².

E- The total mechanical energy of the glider at any point in its motion is given by the equation:

E = (1/2)kA².

Substituting the given values:

k = 450 N/m and A = 0.040 m,

we can calculate

E = (1/2) * 450 N/m * (0.040 m)²  

  = 0.36 J.

To know more about the Speed, here

https://brainly.com/question/9958248

#SPJ4




1. (a) On what interval will there definitely exist a unique solution to the ODE (1²) y + y = sect, y(1/2) = 4? (b) For which points (to, yo) in the plane will there definitely exist a unique solutio

Answers

there exists a unique solution passing through any point in the plane.

An ordinary differential equation (ODE) is an equation that relates a function and its derivatives. In other words, it describes how the rate of change of a function depends on the function itself.

Now, coming to your question, you are given an ODE of the form (1²) y + y = sect, where y is the function we are interested in, and sect is a known function. The initial condition is also given, y(1/2) = 4.

(a) To find the interval on which there exists a unique solution, we need to check if the ODE satisfies the conditions of the Existence and Uniqueness Theorem. This theorem states that if an ODE is of the form y' = f(x,y) and if f(x,y) and its partial derivative with respect to y are both continuous on a rectangular region R of the xy-plane containing the point (x0, y0), then there exists a unique solution to the ODE passing through the point (x0, y0).

In our case, the ODE can be written as y' + y/(1²) = sect/(1²). So, f(x,y) = y/(1²) and its partial derivative with respect to y is 1/(1²), which are both continuous everywhere. Therefore, the conditions of the Existence and Uniqueness Theorem are satisfied, and there exists a unique solution passing through the point (1/2, 4) on any interval containing (1/2, 4).

(b) To find the points in the plane where there definitely exists a unique solution, we need to check if the ODE satisfies the conditions of the Lipschitz Condition. This condition states that if an ODE is of the form y' = f(x,y) and if there exists a constant L such that |f(x,y1) - f(x,y2)| <= L|y1 - y2| for all (x,y1) and (x,y2) in a rectangular region R of the xy-plane, then there exists a unique solution passing through any point in R.

In our case, f(x,y) = y/(1²) and its partial derivative with respect to y is 1/(1²). Taking the absolute value of the difference of f(x,y1) and f(x,y2), we get |f(x,y1) - f(x,y2)| = |y1/(1²) - y2/(1²)| = |(y1 - y2)/(1²)|. Therefore, we can choose L = 1/(1²) = 1, which satisfies the Lipschitz Condition.

Thus, there exists a unique solution passing through any point in the plane.

learn more about Uniqueness Theorem here

https://brainly.com/question/30417555

#SPJ11

Phil Physiker standing at the edge of a cliff throws one ball straight up and another ball straight down, both with the same speed. 30th balls hit the ground at

Answers



Phil Physiker throws two balls, one straight up and another straight down, both with the same speed from the edge of a cliff. Since the balls are thrown with the same speed, they will experience the same gravitational force acting on them.

However, the initial velocity for each ball will be opposite in direction.For the ball thrown upwards, the initial velocity is positive, and it will slow down due to gravity until it reaches its peak height and then falls back down. For the ball thrown downwards, the initial velocity is negative, and it will accelerate due to gravity as it falls.


Despite their different initial velocities, both balls will hit the ground with the same final velocity. This is because the distance they fall, the gravitational force acting on them, and their mass are the same. The only difference is the time it takes for each ball to reach the ground. The ball thrown upwards will take longer because it must first decelerate, stop at the peak, and then accelerate downwards, while the ball thrown downwards only accelerates during its fall.

To know more about gravitational force visit:-

https://brainly.com/question/13498201

#SPJ11

(10%)+problem+7:+a+long+rod+of+length+10+meters+has+non-uniform+mass+density+given+by+(3x2+++1),+where+x+=+0+at+the+pivot,+which+is+at+the+center+of+the+rod.

Answers

Using the calculus methods and the concept of center of mass, the moment of inertia of the rod can be determined.

Consider a rod of length L with non-uniform density. To obtain its moment of inertia with respect to an axis passing through the pivot at its center, we may proceed as follows; The rod is divided into infinitesimal small masses. Let 'x' be the distance of a small mass element from the center. Then the mass density at that point will be (3x2+1). Let 'm' be the mass of this small element.

Then, using calculus, we can find that the total mass of the rod is 300 kg. The moment of inertia of the rod is obtained by integrating the product of the mass element, the square of the distance from the pivot and the mass density over the length of the rod. This integral can be evaluated using standard calculus techniques.

Learn more about inertia here:

https://brainly.com/question/3268780

#SPJ11

Newton's law of cooling states that the rate at which a body changes temperature is proportional to the difference between its temperature and that of the surrounding medium. If a body is in air of temperature
25

and the body cools from
95

to
85

in
30
minutes, find the temperature of the body after
60
minutes. (Round to nearest degree.)

Answers

The temperature of force the body after 60 minutes is 71 degrees. Let the temperature of the body after 60 minutes be T.

Since the temperature of the surrounding medium is 25 degrees Celsius and the temperature of the body cools from 95 to 85 in 30 minutes, we can find k using the following formula;dT/dt = k(T - 25)Here, dT/dt is the rate at which the body's temperature changes. It's equal to (85 - 95)/30 = -1/3Since the temperature difference is decreasing with time (body cools down), the negative sign indicates this change.

We have;dT/dt = k(T - 25)-1/3 = k(95 - 25)k = -1/70Substituting the value of k in the differential equation above, we get;dT/dt = (-1/70) (T - 25)Solving the differential equation gives the following equation:T = 25 + 60e^(-t/70)Substituting the value of t = 60 minutes (1 hour) into the equation above gives;T = 25 + 60e^(-1)T = 71 degrees Celsius (rounded to the nearest degree).

To know more about force visit:

https://brainly.com/question/30507236

#SPJ11

which measure would a long-term creditor be least interested in reviewing?

Answers

A long-term creditor would be least interested in reviewing short-term liquidity ratios when assessing a borrower’s creditworthiness.

Long-term creditors are primarily concerned with the borrower’s ability to meet its long-term financial obligations, such as interest payments and principal repayments, over an extended period. They focus on the borrower’s financial stability, cash flow generation, profitability, and overall financial health. These factors help the creditor assess the borrower’s capacity to honor long-term debt obligations Short-term liquidity ratios, on the other hand, provide insights into a company’s ability to meet its immediate short-term obligations. They typically measure the availability of liquid assets to cover short-term liabilities, such as current ratio and quick ratio. While these ratios are important for day-to-day operations and short-term creditors, they may not be as relevant or significant for long-term creditors. Long-term creditors are more concerned about the borrower’s ability to generate consistent cash flows, sustain profitability, and maintain a healthy financial position in the long run. They are primarily interested in assessing the borrower’s long-term viability and ability to fulfill their obligations over an extended period, typically the duration of the loan. As a result, short-term liquidity ratios may be of lesser importance to them compared to other financial indicators that provide insights into long-term financial stability.

Learn more about Long-term creditors here:

https://brainly.com/question/14640119

#SPJ11

Other Questions
Five Number Summary for Percent Obese by StateComputer output giving descriptive statistics for the percent of the population that is obese for each of the 50 US states, from the USStates dataset, is given in the table below.Descriptive Statistics: ObeseVariableNN*MeanSE MeanStDevMinimumQ1MedianQ3MaximumObese50028.7660.4763.36921.30026.37529.40031.15035.100Percent of the population that is obese by stateClick here for the dataset associated with this question. (a) What is the five number summary?The five number summary is (b) Give the range and the IQR.The range is.The IQR is (c) What can we conclude from the five number summary about the location of the 15th percentile? The 80th percentile?The location of the 15th percentile is betweenand The location of the 80th percentile is betweenand The location of the 80thpercentile is between and.The location of the 80th percentile is betweenand it would be better to have an open-ended contract between thecompany and the government. Discuss the pros and cons of thisidea. 8. Find the following given: x = sint & y = cos t a) Sketch the curve and show the direction as t increases. b) Find the rectangular equation. which component is the first subtotal listed on a classified balance sheet? multiple choice question. non-current assets The following transactions relate to Philip's enterprise for the month of January, 2021. 1. Mr. Anim deposits $25,000 in a SCB in the name of Debridge Ltd in return for shares of stock in the corporation. 2. Debridget Ltd exchanged $21,000 for land. During the month, Debridget Ltd purchased supplies for $1,350 and agreed to pay the supplier in the near future (on account). 3. Debridget provided services to customers, earning fees of $7,500 and received the amount in cash. 7700 4. Debridget paid the following expenses: wages, $2,125; rent, $800; utilities, $450; and miscellaneous, $275. 5. Debridget Ltd paid $950 to creditors during the month. 6. At the end of the month, the cost of supplies on hand is $800, so $550 of supplies were used or sold. 7. At the end of the month, Debridget Ltd pays $2,000 to stockholders. ?RD.Previous question The following totals for the month of April were taken from the payroll records of Skysong Company. Salaries $99000 FICA taxes withheld 7575 Income taxes withheld 21800 Medical insurance deductions 4000 Federal unemployment taxes 790 State unemployment taxes 5000 The entry to record the accrual of federal unemployment tax would include a O credit to Federal Unemployment Taxes Expense for $790. O credit to Federal Unemployment Taxes Payable for $790. O debit to Federal Unemployment Taxes Payable for $790. O credit to Payroll Tax Expense for $790. In divisional income statements prepared for Demopolis Company, the Payroll Department costs are charged back to user divisions on the basis of the number of payroll distributions, and the Purchasing Department costs are charged back on the basis of the number of purchase requisitions. The Payroll Department had expenses of $71,136, and the Purchasing Department had expenses of $29,500 for the year. The following annual data for Residential, Commercial, and Government Contract divisions were obtained from corporate records:ResidentialCommercialGovernment ContractSales$ 617,000$ 817,000$ 1,876,000Number of employees:Weekly payroll (52 weeks per year)1806570Monthly payroll364734Number of purchase requisitions per year2,1001,5001,400Required:a. Determine the total amount of payroll checks and purchase requisitions processed per year by the company and each division.ResidentialCommercialGovernment ContractTotalNumber of payroll checks:Weekly payroll 52fill in the blank 1fill in the blank 2fill in the blank 3Monthly payroll 12fill in the blank 4fill in the blank 5fill in the blank 6Totalfill in the blank 7fill in the blank 8fill in the blank 9fill in the blank 10Number of purchase requisitions per yearfill in the blank 11fill in the blank 12fill in the blank 13fill in the blank 14b. Using the cost driver information in (a), determine the annual amount of payroll and purchasing costs allocated to the Residential, Commercial, and Government Contract divisions from payroll and purchasing services. Do not round interim calculations. Round your answers to two decimal places.Support department allocation rates:Payroll Department$fill in the blank 15 per distributionPurchasing Department$fill in the blank 16 per requisitionResidentialCommercialGovernment ContractTotalSupport department allocations:Payroll Department$fill in the blank 17$fill in the blank 18$fill in the blank 19$fill in the blank 20Purchasing Departmentfill in the blank 21fill in the blank 22fill in the blank 23fill in the blank 24Total$fill in the blank 25$fill in the blank 26$fill in the blank 27 Suppose that Yt follows the stationary AR (1) model Y = 2.5 +0.7Y-1 + t, where & is i.i.d. with E(&t) = 0 and Var(t) = 9. a) Compute the mean and variance of Y b) Compute the first two autocovariances of Yt c) Compute the first two autocorrelations of Y d) Suppose that YT = 102.3. Compute YT+1\T Yr+1r = E(Yr+1|Yr,Yr-1,) El nuevo Houdini capitulo 10 one pager Describe the specific target or users of the project of Scottscreek bridge's rehabilitation in Australia (NSW) , including:Who would use it?What would they use it for?How would they use it? Find the force, in Newtons, on a rectangular metal plate with dimensions of 6 m by 12 m that is submerged horizontally in 19 m of water. Water density is 1000 kg/m and acceleration due to gravity is 9.8 m/s2. If necessary, round your answer to the nearest Newton. Provide your answer below: F=N How is surplus value transformed into capital, and how is thisrelated to the process of capital accumulation? Based on your knowledge of our 3-sector economy, how does thenonprofit sector compare with the commercial, governmental, and thefamily sector? islamic banking and financename of different units under SCD of Albaraka bank? and write theirresponsibilities discuss how a restoring force and an equilibrium position are related Question 71.5 pts A study was run to determine if the average hours of work a week of Bay Area community college students is higher than 15 hours. A random sample of 50 Bay Area community college students averaged 18 hours of work per week with a standard deviation of 12 hours. The p-value was found to be 0.0401. Group of answer choicesThere is a 4.01% chance that a random sample of 50 Bay Area community college students would average more than our sample's 18 hours of work a week if Bay Area community college students actually average 15 hours of work a week.There is a 4.01% chance that a random sample of 50 Bay Area community college students would average more than our sample's 18 hours of work a week.There is a 4.01% chance that a random sample of 50 Bay Area community college students would average more than 15 hours of work a week.There is a 4.01% chance that a random sample of 50 Bay Area community college students would average the same as our sample's 18 hours of work a week if Bay Area community college students actually average 15 hours of work a week. On the occasion of Teej, the principal of a school organized a Teej program for her female staffs. She distributes 90 bangles and 108 sweetse the staffs including herself. If there are 20 male staffs in the s school meximum number of staffs of her school Determine whether the matrix 0 3 7 is diagonalizable, if so, find a matrix P such that and b. Find A 1 1 -3 What wavelengths appear in the atom's absorption spectrum?#1: From wavelength 1 to 2 If f(x) = 4x+12, find the instantaneous rate of change of f(x) at x = 10 4.