Answer:
the first overtone is 200 Hz
Explanation:
The computation of the first overtone would be given below:
The following formula should be applied
n_1 = n_3 ÷ 3
= 300 ÷ 3
= 100 Hz
Now n_2 is
= 2 × 100
= 200 Hz.
Hence, the first overtone is 200 Hz
we simply applied the above formula and the same would be relevant
It is 32 degrees F outside. What is this in Kelvin?
Answer:
273.15
Explanation:(32°F − 32) × 5/9 + 273.15 = 273.15K
A car of mass 1800000 g, going 150 km/h rear ends a truck, 5500 kg going 100000 m/h. What are their velocities after an elastic collision in one dimension?
Answer:
v = 2099.5 km/h, v' = -618.8 km/h
or
v =-1996.6 km/h, v' = 721.7 km/h
Explanation:
From the law of conservation of momentum,
Total momentum before collision = Total momentum after collision
For elastic,
mu+m'u' = mv+m'v'..................... Equation 1
Total kinetic energy before collision is equal to total kinetic energy after collision
mu²+m'u'² = mv²+m'v'²............. Equation 2
Where m and m' are the mass of the car and truck respectively, and u and u' are the initial velocity of the car and the truck respectively, v and v' are the final velocity of the car and the truck respectively.
Given: m = 1800000 g = 1800 kg, m' = 5500 kg, u = 150 km/h, u' = 100000 km/h
Substitute these values into equation 1 and 2
1800(150)+5500(100000) = 1800v+5500v'
1800v+5500v' = 375500................... Equation 3
1800(150²) +5500(100000²) = 1800v²+5500v'²...................... Equation 4
Solving equation 3 and 4 simultaneously,
v = 2099.5 km/h, v' = -618.8 km/h
or
v =-1996.6 km/h, v' = 721.7 km/h
What is the impulse required to stop a 4.8 kg mass traveling at 18.9 m/s?
Report your answer to 1 decimal place.
Answer:
MASS=4.8KG
VELOCITY= 18.9
Put into the formula.
Explanation:
Impulse= Mass* change in velocity, it gives you everything you need to input it into the formula
It has been shown that the half-life for this radioactive isotope is 20 years. In the year 2000, an archaeology team unearths pottery and is using this isotope for radiometric dating to place the age of the pottery. It is shown that 95% of the nuclei have decayed. How much mass has decayed? How much mass is left?
I'd prefer to be shown a step-by-step on how to solve for these questions. I do better with seeing the step-by-step, and can retain the information better.
Answer:
(1/2)*n = .05 by the definition of half-life where n is the number of half-lives
n ln .5 = ln .05
n = ln .05 / ln .5 = 4.32 number of half-lives
So 4.32 * 20 = 86.4 years has passed
Actually, they only want the mass left. However, all that has changed is that
95% of the original radioactive atoms have changed to a different form of about the same amount of mass. The amount of mass remaining would be about the same. Also, one doesn't know the percentage of radioactive atoms
that formed the original mass.
Hey does anyone know the answer?
Answer:
C
Explanation:
The law of conservation of energy determines that energy cannot be created or destroyed.
What determines the precision of a measurement?
Answer:
Precision is determined by a statistical method called a standard deviation To determine if a value is precise find the average of your data, then subtract each measurement from it
PLEASE ILL GIVE BRAINLIST Which term describes the high point of a transverse wave?
O A. Crest
O B. Compression
O C. Rarefaction
O D. Trough
Answer:
I belive that the answer is the A
Crest describes the high point of a transverse wave. Therefore, the correct option is option A.
Transverse waves are those which oscillate in directions that are opposite to the wave's forward motion. Electromagnetic radiation, seismic waves, or water surface ripples are all examples of transverse waves.
A simple transverse wave can be represented by a sine or cosine curve because any point's amplitude—that are, its distance from the axis—is proportional to the sine (or cosine) associated with that angle. Crest describes the high point of a transverse wave.
Therefore, the correct option is option A.
To know more about transverse wave, here:
https://brainly.com/question/13863548
#SPJ7
Which statement describes a drawback of digital medical records over paper records?
a) Digital records may be more difficult to read than handwritten records.
b) Digital medical records might be impossible to access in a power outage.
c) Digital records would be less safe if there was a fire.
d) Digital records have no way to limit access to private information.
Answer:
b)
Explanation:
From the options provided, the only drawback of using digital medical records is that Digital medical records might be impossible to access in a power outage. This is because digital records are saved on a database either locally or remotely. Regardless of which, the records can only be accessed through an authorized computer system that is connected to the database. These are electronic systems that require power to function. Without power you would not be able to use the computer and therefore, would not have access to the medical records. Unlike, paper records which can be accessed regardless of whether there is power or not.
What is Compression?
Answer:
Compression, decrease in volume of any object or substance resulting from applied stress. Compression may be undergone by solids, liquids, and gases and by living systems.
Explanation:
| Britannicahttps://www.britannica.com
PLEASE PLEASE HELP!! Do ultraviolet light or microwaves have a higher frequency?
Answer:The different types of radiation are defined by the the amount of energy found in the photons. Radio waves have photons with low energies, microwave photons have a little more energy than radio waves, infrared photons have still more, then visible, ultraviolet, X-rays, and, the most energetic of all, gamma-rays.
Explanation:
How least count determine the precision of a measurement?
Explanation:
The least count of the normal scale is 1mm whereas the least count of vernier calliper is 0.01 mm
Which statement best describes how resources are distributed?
according to it's nature
A block of wood and a block of aluminum have been sitting out for a while. How do their temperatures compare?
Answer:
Block of aluminum
Explanation:
The block of aluminum because of the conductivity, and is a metal, so it gets hotter faster
The temperature of wood and the aluminium will depend upon thier thermal coductivity.
What is thermsal conductivity?The thermal conductivity of any material is defined as the amount of heat from a material can flow in a unit area per unit degree centigrade for a unit distance.
The thermal conductivity of wood is around 0.90 to 0.197 w/mk and that of aluminium is around 88 to 251 w/mk.
We can see that the aluminium block will absorb much amount of heat as compared to the wood block. Because the thermal conductivity of aluminium is much higher then the wood.
Hence temperature of wood and the aluminium will depend upon thier thermal coductivity.
To know more about Thermal conductivity follow
https://brainly.com/question/11213835
What is the motion of an apple when it falls from a tree ? a)Constant b)accelerating c)decelerating d)zero
The motion of an apple when it falls from a tree is
b) Accelerating
The motion of apple is when it falls from a tree is the case of free fall.
During free fall , the initial velocity of the apple or any object is zero but it gains some velocity due to gravitatonal acceleration .
A student is provided with a rubber cylinder and a patch of synthetic fur. The rubber cylinder and the patch are electrically neutral. The student rubs the cylinder back and forth along the fur. A short time later, after the cylinder and fur have been placed on insulating stands, the student determines that the fur has a net negative electric charge. Before the patch of fur attained its net negative charge, it was considered to be electrically neutral. Which of the following claims, with appropriate evidence, is correct about the distribution of charge in the patch of fur before the charging process?
a. It is an isolated system.
b. It is a closed system.
c. It is an open system.
d. The type of system cannot be determined unless information is known about the net force exerted on the system at any given time.
Answer:
Option b ( It is a closed system) is the appropriate answer.
Explanation:
The mass transfer isn't made on a platform. There seems to be no mass transfer, the mechanism can't be separated as power lines will interfere beyond the physical boundaries including its fur patch.The mechanism can't however be separated and, while the mass transfer is indeed not present, several field lines will communicate well outside the mechanism.The other options are not linked to the situation in question. Thus, the answer is correct.
1 gram of radium is reduced by 3.1 mg in 5 years by alpha decay.
Calculate the half-life of radium.
Answer:
1 gm = 1000 mg
N = No e^-y t where y = lambda the decay constant
N / N0 = .9969
ln .9969 = - y t
-.00310 = - 5 y
y = .00310 / 5 = .000621
So the half-life = .693 / y
T^1/2 = .693 / .000621 = 1116 or about 1120 yrs
A solenoid that is 69.3 cm long has a cross-sectional area of 24.0 cm2. There are 1260 turns of wire carrying a current of 8.78 A. (a) Calculate the energy density of the magnetic field inside the solenoid. (b) Find the total energy in joules stored in the magnetic field there (neglect end effects).
Answer:
a) 34.17J/m^3
b) 0.0468 J
Explanation:
a) Calculate the energy density of the magnetic field inside the solenoid as follows:
[tex]u_{B} &=\frac{U}{A l} \\ &=\frac{L I^{2}}{2 A l} \quad\left(U=\frac{1}{2} L I^{2}\right) \\ &=\frac{\mu_{0} N^{2} A I^{2}}{2 A l^{2}} \quad\left(L=\frac{\mu_{0} N^{2} A}{l}\right) \\ &=\frac{\mu_{0} N^{2} I^{2}}{2 l^{2}}[/tex]
Substitute the corresponding values in the above equation.
[tex]u_{B} &=\frac{4 \pi\left(10^{-7}\right)(1260)^{2}(8.78)^{2}}{2(0.693)^{2}} \\
&=34.17 \mathrm{~J} / \mathrm{m}^{3}[/tex]
b) Calculate the total energy stored in the solenoid as follows:
[tex]U &=u_{B} A l \\ &=(34.17)\left(24 \times 10^{-4}\right)\left(69.3 \times 10^{-2}\right) \\ &=0.0468 \mathrm{~J}[/tex]
A glacier advanced down a mountain from an elevation of 2010 m to 1780 m in 5 years. What was the glaciers rate of change in a year and a month?
the answer must also be shown in a graph
Answer:
The solution of the given problem is provided in the following subsection.
Explanation:
According to the question,
The change in the height of the glacier will be:
= [tex]1780-2010[/tex]
= [tex]-230[/tex]
Change in time,
= 5 years
Now,
The rate of change will be:
= [tex]\frac{m}{years}[/tex] ∵ (1 year = 12 months)
= [tex]\frac{230}{5}[/tex]
= [tex]-46 \ m/years[/tex]
or,
The rate of change will be:
= [tex]\frac{m}{months}[/tex] ∵ (5 years in months = 5×12 months)
= [tex]\frac{-230}{5\times 12}[/tex]
= [tex]\frac{-230}{60}[/tex]
= [tex]=3.83 \ m/months[/tex]
Why can’t human males be carriers for sex linked (x-linked) disorders?
Answer:
This is because the X chromosome is large and contains many more genes than the smaller Y chromosome. In a sex-linked disease, it is usually males who are affected because they have a single copy of X chromosome that carries the mutation.
Explanation:
The definition that best describes invention is:
Your answer:
Invention is the first product produced on an assembly line
Invention is having a desired goal to achieve something
Invention is changing the size of an existing product
Invention is a process of turning ideas into devices or systems
Answer: Invention is a process of turning ideas into devices or systems.
Explanation:
Invention is a process of turning ideas into devices or system. Invention, simply has to do with bringing of ideas together so as to create something unique.
It should be noted that without creativity, invention can't take place. Examples of invention include the light bulb, fans etc. They are products that were designed based on the ideas that someone had Wich was turned into a device.
What do all magnets have in common? Select all that apply.
magnetic domains are aligned
magnetic domains are not aligned
movement of protons creates a magnetic field
all magnets have opposite poles ( a North pole and South pole)
movement of electrons creates a magnetic field
moving electrons generate magnetic fields
Answer:
all magnets have opposite poles (north and south)
magnetic domains are aligned
moving electrons generate a magnetic filed
movement of electrons creates a magnets field
Tsunamis are fast-moving waves often generated by underwater earthquakes. In the deep ocean their amplitude is barely noticable, but upon reaching shore, they can rise up to the astonishing height of a six-story building. One tsunami, generated off the Aleutian islands in Alaska, had a wavelength of 668 km and traveled a distance of 3180 km in 4.81 h. (a) What was the speed (in m/s) of the wave
Answer:
215.5 m/s
Explanation:
Given that:
the wavelength λ = 668 km
distance (d) = 3180 km
time t = 4.81 hr
[tex]a) speed (v) =\dfrac{distance}{time}[/tex]
[tex]speed (v) =\dfrac{3180}{4.1}[/tex]
[tex]speed (v) =775.61 \ km/h[/tex]
[tex]speed (v) =(\dfrac{775.61\times 1000 }{3600}) \ m/s[/tex]
[tex]speed(v) = 215.5 \ m/s[/tex]
The frequency is:
[tex]f = \dfrac{v}{\lambda}[/tex]
[tex]f = \dfrac{215.5 }{668 \times 1000}[/tex]
[tex]f = 3.226 \times 10^{-4} \ Hz[/tex]
c)
The period:
[tex]T = \dfrac{1}{f}[/tex]
[tex]T = \dfrac{1}{3.226 \times 10^{-4}}[/tex]
T = 3099.8 seconds
If the force of gravity changes what will happen and what would cause it to change?
A 4 kg particle moves at a constant speed of 2.5 m/s around acircle of radius 2 m. What is its angular momentum about the center of the circle? Answerin units of kg · m2/s. What is its moment of inertia about an axis through the center ofthe circle and perpendicular to the plane of the motion? Answer inunits of kg · m2. What is t
Explanation:
Given that,
Mass of the particle, m = 4 kg
Speed of the particle, v = 2.5 m/s
The radius of the circle, r = 2 m
We need to find the angular momentum about the center of the circle. The formula for the angular momentum is given by :
[tex]L=mvr[/tex]
Substitute all the values,
[tex]L=4\times 2.5\times 2\\\\L=20\ kg{\cdot}m^2s[/tex]
So, the angular momentum of the particle is 20 kg-m² s.
a force acting on a body of mass 24 kg produces an acceleration of 12ms ^-2 . what acceleration will the same force produce in a body of 10 kg
please give answers if they are right and you know how to do it
Answer: a = 28,8
Explanation:
[tex]F = ma[/tex]
m = 24 , a = 12
[tex]F=ma\\\\F = 24 x12\\\\F=288[/tex]
Same force :
m = 10
a = ?
F = 288
[tex]F = ma \\\\288 = 10xa \\\\28,8=a[/tex]
a piece of clay with mass m is traveling with an unknown velocity in the positive x-direction, when it collides and sticks to a block of mass 3m, moving with velocity v=-3m/s. after the collision, the block and clay are stuck together and traveling with a velocity of 1 m/s in the negative x-direction. what was the original velocity of the clay mass?
Answer:
13 m in the + x direction.
Explanation:
Givens
m1 = m
m2 = 3m
v1= ? = x
v2 = - 3 m/s
v3 = v4 = - 1 m/s
Equation
Let x be the speed of the lighter object before collision.
Momentum before collision = momentum after collision
Solution
mx - 3m * 3m/s = (m1 + m2)*(-1)
m(x - 3*3m/s) = (m + 3m)(-1)
m(x - 9) = - 4m Cancel the ms
x - 9 = 4 Add 9 to both sides
x = 9 + 4
x = 13 m/s
What is the energy of an electromagnetic wave that has a frequency of 5.0 * 10^5 Hz? Use the equation E=hf, where h=6.626 * 10^-34 J*s.
I will mark brainliest!!! :)
Answer:
3.3*10^-28j
Explanation:
A P E X
The energy of an electromagnetic wave that has a frequency of 5.0 * 10^5 Hz is 3.3 * 10 ^ -28 J
What is Electromagnetic waves ?Electromagnetic waves are the waves that are created as a result of vibration between an electric field and a magnetic field . They are composed of oscillating magnetic and electric field
Energy of Electromagnetic waves can be calculated by
Energy = h * f where h = plank's constant = 6.626 * 10^-34 J s.
f = frequency of electromagnetic waves
given : h = 6.626 * 10^-34 J s.
frequency = 5.0 * 10^5 Hz
Energy of electromagnetic waves = (6.626 * 10^-34 J s) *( 5.0 * 10^5 Hz)
= 33.13 * 10 ^ -29 J
= 3.3 * 10 ^ -28 J
correct answer is c)3.3 * 10 ^ -28 J
Learn more about electromagnetic waves
https://brainly.com/question/1397850?referrer=searchResults
#SPJ3
What is Kirchoff law
Answer:
.
Kirchhoff's circuit laws are two equalities that deal with the current and potential difference (commonly known as voltage) in the lumped element model of electrical circuits. They were first described in 1845 by German physicist Gustav Kirchhoff.[1] This generalized the work of Georg Ohm and preceded the work of James Clerk Maxwell. Widely used in electrical engineering, they are also called Kirchhoff's rules or simply Kirchhoff's laws. These laws can be applied in time and frequency domains and form the basis for network analysis.
Both of Kirchhoff's laws can be understood as corollaries of Maxwell's equations in the low-frequency limit. They are accurate for DC circuits, and for AC circuits at frequencies where the wavelengths of electromagnetic radiation are very large compared to the circuits.
What is the logical relationship between the following two categorical propositions? Some food is not edible. Some food is inedible.
A. contrapositive
B. Subalternation
C. Obverse
D. contrary
The volume of the vessel is reduced twice,and the number of molecules is reduced three times.How the pressure will change gas?
Answer:
P₁ = ⅔ P₀
Explanation:
For this exercise we can use the ideal gas equation
PV = n R T
let's write the equation for the initial point, where we will use the subscript o and the end with subscript 2
Suppose the temperature does not change in the process
P₀V₀ / n₀ = P₁V₁ / n₁
They tell us that
V₁ = V₀ / 2
n₁ = n₀ / 3
we substitute
[tex]P_o \frac{V_o}{n_o} = P_1 \frac{V_o}{2} \frac{3}{n_o}[/tex]
P₀ = [tex]\frac{3}{2}[/tex] P₁
P₁ = ⅔ P₀