Answer:
40 L
Explanation:
From the question given above, the following data were obtained:
Initial volume (V₁) = 20 L
Initial temperature (T₁) = T
Final temperature (T₂) = 2T
Pressure (P) = constant
Final volume (V₂) =?
The new (i.e final) volume of the gas can be obtained as follow:
V₁/T₁ = V₂/T₂
20/T = V₂/2T
Cross multiply
T × V₂ = 20 × 2T
T × V₂ = 40T
Divide both side by T
V₂ = 40T /T
V₂ = 40 L
Therefore, the new volume of the gas is 40 L
define saturated and unsaturated fats
Answer:
SATURATED: Saturated fat is a type of fat in which the fatty acid chains have all or predominantly single bonds.
UNSATURATED: Unsaturated fats are loosely packed. They tend to be liquid at room temperature.
There are two main types of unsaturated fat:
Monounsaturated
Polyunsaturated
A compound is found to contain 29.67 % sulfur and 70.31 % fluorine by mass.
To answer the question, enter the elements in the order presented above.
QUESTION 1:
The empirical formula for this compound is
water is a ____ molecule meaning the positive hydrogen end attracts the negative oxygen ends of another
A. balance
B.universal
C. wet
D.polar
please answer! will give brainliest
Water is a polar molecule where, the positive hydrogen end attracts the negative oxygen ends of another water molecule. Thus, option D is correct.
What is polarity ?Polarity is ability of charge separation in a molecule. In some molecules, the positive and negative ends exists separately and both ends remains reactive towards the counter charged end of other molecule.
The charge separation in molecules results in a dipole moment. Permanent dipole moment make the molecule polar. Water is a polar molecule.
The shared pair of electrons in water are more attracted towards the electronegative oxygen atom leads the charge separation. This polarity helps to the formation of strong intermolecular hydrogen bonding.
Find more on polar compounds:
https://brainly.com/question/29869649
#SPJ2
Part 1: Fill in the blank
Newton’s Second Law: Unbalanced forces cause an object to ______.
Answer:
and can cause changes in motion. Inertia.
Explanation:
Answer: change its motion.
Explanation: hope this helps :)
Which statement about the atomic nucleus is correct?A.The nucleus is made of protons and has a negative charge.B.The nucleus is made of protons and neutrons and has a negative charge.C.The nucleus is made of electrons and has a negative charge.D.The nucleus is made of protons and neutrons and has a positive charge.
Drag each sequence to the correct location in the table.
Sort the sequences based on the type of mutation they display.
TATTA - TATTAGA
TATTCG TATTAAT
TATTAT TATTACG
ACGTATTC - ACGTTTC
ATTA GTAC - ATGT ACTA
GATCCAT - GATCCATCA
TACTTAGT TACTTGT
Deletion
Translocation
Insertion
Answer:
Does the picture go with the question?
Explanation:
What are 2 substances that DO NOT REACT?
Water and oil? Cake and your finger? Glass and virtually anything? ...
Tonnes and tonnes of noninterreactant substances.
Hope this helps.
How many electrons can beryllium lend
Answer:
2 because it has two outer shell electrons out of 8 (relevant rule only for the first 20 elements)
5.14 x 1023 ions NaCl to Moles
Answer:
2 moles
Explanation:
For a mole NaCi, we have a mole of sodium ion and a mole of chloride.
What usually happens to the solubility of gas as temperatures decreases?
Answer:
the solubility of the gas increases
Explanation:
as the kinetic energy of a gaseous solute increases,its molecules has a greater chance of escaping the attraction of the solvent molecules and return to the gas phase..which lead to the solubility of the gas been Increase as the temperature decreased .
A tank of gas is found to exert 8.6 atm at 38°C. What would be the required
temperature to change the pressure to standard pressure?
Answer:
36.2 K
Explanation:
Step 1: Given data
Initial pressure of the gas (P₁): 8.6 atmInitial temperature of the gas (T₁): 38°CFinal pressure of the gas (P₂): 1.0 atm (standard pressure)Final temperature of the gas (T₂): ?Step 2: Convert T₁ to Kelvin
We will use the following expression.
K = °C +273.15
K = 38 °C +273.15 = 311 K
Step 3: Calculate T₂
We will use Gay Lussac's law.
P₁/T₁ = P₂/T₂
T₂ = P₂ × T₁/P₁
T₂ = 1.0 atm × 311 K/8.6 atm = 36.2 K
What does (endangered wildlife) mean ?
Answer:
Hey mate....
Explanation:
This is ur answer.....
A species considered to be facing a very high risk of extinction in the wild.
Hope it helps you,
Mark me as the brainliest...
FOLLOW ME! :)
Answer:
It means when a species in the wildlife is in danger or close to being completely extinct.
what are the particles of copper at rtp
Answer:
i think the answer is... A
What is an example of a neutral mutation? a frog born with white skin a person's inability to break down sugar a red flower with one part colored yellow
Answer:
I think a red flower with one part colored yellow
Explanation:
a red flower with one part colored yellow
Which angle allows the soil to receive the most direct ligh
0 degrees
20 degrees
45 degrees
90 degrees
Answer: 90 degrees .
Explain why this substance is formed?
Which of the following are true about both the sun and the stars? Choose the three correct answers.
A.
Both are visible during the day in summer.
B.
Both move across the sky from east to west.
C.
Both change positions in the sky due to Earth's revolution.
D.
Both are visible at night in winter.
E.
Both appear in different positions in the sky due to Earth's rotation.
F.
Both move from north to south in the sky.
Answer:
D, F
Explanation:
What are the purpose of a chemical equation check all that apply
Answer: (A,B,D) [1, 2, 4]
Explanation:
10. Which best explains why the total mass of the product(s) would be less than the total weight of the
reactant(s) after a chemical reaction?
А
A physical change occurred.
B
Atoms involved in the reaction lost mass.
с
Precipitates were created in the new solution.
D
Gases were released to the atmosphere.
Answer:
D. Gases were released to the atmosphere
Explanation:
In accordance to the law of conservation of mass, the total amount of reactants must equate the total amount of products at the end of the reaction because matter can not be lost or created. However, certain changes like gas evolution, formation of precipitate etc. indicates the occurrence of a chemical reaction.
In a chemical reaction, the total mass of the product(s) would be less than the total weight of the reactant(s) because GASES, which constituted part of the mass of the reaction, WERE RELEASED INTO THE ATMOSPHERE. However, if the mass of the gas released can be accounted for, the amount of reactants and products must balance.
Which statement best describes the use of a chemical indicator in a titration?
A. It must be measured to the nearest 0.01 mL.
B. It must be colored in the acid solution.
C. It must measure pH directly at all pH values.
D. It must change color near the equivalence point.
The statement best describes the use of a chemical indicator in a titration is it must change color near the equivalence point.
What is a chemical indicator?A chemical indicator is any substance that shows a chemical change by color or other things.
In titration, phenolphthalein is used as an indicator in the titration of an acid or base.
Other chemical indicators are methyl yellow, litmus paper, and pH indicator.
Thus, the correct option is D. It must change color near the equivalence point.
Learn more about chemical indicators
https://brainly.com/question/7851989
The unusually fast rate at which many glaciers globally are melting is due to
he lies of scientists
too many tree-huggers breathing
human induced Global Warming
political opinion
Answer: human induced global warming
Explanation:
It’s the only one that makes sense if you read the question
PLEASE HELP IMMEDIATELY I NEED THE ANSWER NOT A HINT THANK YOU
Cytoplasm: gel like environment which allows organelles to move about the cell
Golgi bodies: packages and ships materials out of the cell
Cell membrane: controls what goes in and out of the cell
Chloroplast: makes food for plant cells using sunlight
Lysosome: breaks down waste, food, and worn out cell parts
Mitochondria: breaks down food to release energy for the cell
Nucleus: contains the cell's DNA and is the control center of the cell
Endoplasmic reticulum: transports materials within cell; process lipids
Vacuole: stores water, waste and food
Ribosome: make proteins
Suggest why sodium wasn’t produced until the early 19th century.
Answer:
The reason is that sodium attaches itself very strongly to other elements. Its compounds are very difficult to break apartand also because it is so reactive.
This table lists plant adaptations and their functions.
Adaptation Function
flower aids in reproduction
bark ?
cuticle stops water loss
thorns stops predators
Which phrase correctly completes the chart?
A. stores seeds
B. provides protection
C. attracts pollinators
D. carries water
A paracetamol tablet was crushed and an excess of HCl 25cm³ of 1.0mol was added. the result of the solution was titrate against 0.5mol of NaOH. calculate the mass of CaCO3 in the paracetamol.
Answer:
1.35g of CaCO₃ are in the paracetamol
Explanation:
Assuming the volume of the 0.5mol NaOH was 23cm³
The CaCO₃ of paracetamol reacts with HCl as follows:
CaCO₃ + 2HCl → CO₂ + H₂O + CaCl₂
When an excess of HCl is added and titrated, we can find the moles of HCl that react = Moles CaCO₃ based on the second reaction:
NaOH + HCl → H₂O + NaCl
Moles added of NaOH:
23cm³ = 0.023L * (0.5mol / L) = 0.0115 moles NaOH = Moles HCl in excess
Moles of HCl:
25cm³ = 0.025L * (1.0mol / L) = 0.025 moles HCl
The moles of HCl that reacted = Moles CaCO₃ are:
0.025 moles - 0.115 moles = 0.0135 moles CaCO₃
The mass of CaCO₃ -Molar mass: 100.09g/mol- is:
0.0135 moles CaCO₃ * (100.09g/mol) =
1.35g of CaCO₃ are in the paracetamol1. The decomposition of CaCO3 proceeds according to the following equation.
A. If 5 moles of CaCO3 decompose completely, how many moles of CaO are created?
B. If 1 mole of CaCO3 decomposes completely, how many grams of CO2 are created?
C. If 30 grams of CaCO3 decomposes completely, how many grams of CO2 are created?
2. A chemical reaction proceeds according to the following equation.
SiO2 + 4 HF → SiF4 + 2 H2O
A. If 5 moles of SiO2 are used in this reaction, how many moles of H2O are created?
B. If 34.2 moles of HF are used in this reaction, how many grams of H2O are created?
C. If 9.4 grams of SiF4 are created in this reaction, how many grams of SiO2 were used?
How many moles of O are in 11.6 mol Fe(NO3)3?
Express your answer in moles to three significant figures.
Answer:
Why might the expression "1 mole of nitrogen" be confusing? ... WebAssign will check your answer for the correct number of significant ... Calculate the moles of O atoms in 8.18 g of Mg(NO3)2. ... If the molar mass of hemoglobin is 6.8 104 g/mol, how many Fe2+ ions are ... (_) C7H16(l) + 11 O2(g) 7 CO2(g) + 8 H2O(g)
Explanation:
pls help will give brainilest or however you spell it
Answer:
1. balanced
2. balanced
3. unbalanced
4. balanced
5. balanced
6. unbalanced
7. balanced
8. unbalanced
Explanation:
All substances freeze at the same temperature, so they all have exactly the
same freezing point.
O True
O False
Answer:
I think it would be false
Explanation:
All things have a unique freezing/melting point
Which line (A or B) represents a faster
speed?
Answer:
A
Explanation:
Because in 1 second, line A was faster than line B.