Answer: If the solubility of sodium chloride is 36 grams per 100 grams of water then 5.8 moles of NaCl dissolved in 1 L of water solution would be considered unsaturated.
Explanation:
A solution which contains the maximum amount of solute is called a saturated solution. Whereas a solution in which more amount of solute is able to dissolve is called an unsaturated solution.
Now, the number of moles present in 36 g of NaCl (molar mass = 58.4 g/mol) is as follows.
[tex]No. of moles = \frac{mass}{molar mass}\\= \frac{36 g}{58.4 g/mol}\\= 0.616 mol[/tex]
This shows that solubility of sodium chloride is 36 grams per 100 grams of water means a maximum of 0.616 mol of NaCl will dissolve in 100 mL of water.
So, a solution in which number of moles of NaCl are less than 0.616 mol per 100 mL then the solution formed will be an unsaturated solution.
As 5.8 moles of NaCl dissolved in 1 L (or 1000 mL) of water. So, moles present in 100 mL are calculated as follows.[tex]Moles = \frac{5.8 mol}{1000 mL} \times 100 mL\\= 0.58 mol[/tex]
Moles present in 100 mL of water for 3.25 moles of NaCl dissolved in 500 ml in water are as follows.[tex]Moles = \frac{3.25 mol}{500 mL} \times 100 mL\\0.65 mol[/tex]
Moles present in 100 mL of water for 1.85 moles of NaCl dissolved in 300 ml of water are as follows.[tex]Moles = \frac{1.85 mol}{300 mL} \times 100 mL\\= 0.616 mol[/tex]
Thus, we can conclude that if the solubility of sodium chloride is 36 grams per 100 grams of water then 5.8 moles of NaCl dissolved in 1 L of water solution would be considered unsaturated.
What is the fundamental different between combustion and nuclear reaction
Answer:
Nuclear reactions involve a change in an atom's nucleus, usually producing a different element. Chemical reactions, on the other hand, involve only a rearrangement of electrons and do not involve changes in the nuclear.
What is the Kc for the following reaction at equilibrium at 500∘C if [N2]= 0.41 M , [H2]= 0.41 M , and [NH3]= 2.2 M ? N2(g)+3H2(g)⇌2NH3(g)
Answer:
answer po Yan hope it help
temperature usually increase when water condenses which behavior of water is most directly responsible for this phenomenon?
Answer:
Temperature usually increases when water condenses. What behavior of water is most directly responsible for this phenomenon? The release of heat by the formation of hydrogen bonds. Hydrogen bonds stabilize and keep the of ice farther apart than the water molecules of liquid water.
Help (also tell me what the phenotype and genotypes are)
Answer:
genotype are the organism's hereditary information for example DNA
phenotype are the organism's physical characteristics for example your eyes or hair
or how your nose looks
3. Convert the word equations below to symbolic:
Sodium + chlorine sodium chloride
• Calcium + bromine ---- calcium bromide
• Potassium + water → potassium hydroxide + hydrogen
ot
Answer:
1)2Na + Cl2 ----> 2NaCl
2)Ca + Br2 ---->CaBr2
3)K + H2O -----> KOH + H2
What is the phase label on HCl?
A. g
B. aq
C.
D. e
E. s
Answer:
B. aq if the reaction is inorganic (double or single displacement), neutralization, etc.
Explanation:
Hello there!
In this case, unfortunately we are not given the undergoing chemical reaction; however, in the most of the double displacement, neutralization, precipitation and in general, inorganic reactions, the hydrochloric acid must be B. aq as it must be dissolved in water as the reaction media. On the other hand, in some organic reactions, it can be either aqueous or gaseous, the latter, specially as a product. For that reason, you will need to make sure whether your reaction is organic or inorganic to correctly figure out the phase label.
Best regards!
Identify the term that matches each electrochemistry definition.
a. The electrode where reduction occurs ___________
b. An electrochemical cell powered by a spontaneous redox reaction ___________
c. The electrode where oxidation occurs__________
d. An electrochemical cell that takes in energy to carry out a nonspontaneous redox reaction ____________
e. A chemical equation showing either oxidation or reduction ___________
Answer: a. Cathode
b. Galvanic cell
c. Anode
d. Electrolytic cell
e. half reaction
Explanation:
Galvanic cell or Electrochemical cell is defined as a device which is used for the conversion of the chemical energy produced in a spontaneous redox reaction into the electrical energy.
Electrolytic cell is a device where electrical energy is used to drive a non spontaneous chemical reaction.
In the electrochemical cell, the oxidation occurs at an anode which is a negative electrode and the reduction occurs at the cathode which is a positive electrode. Thus the electrons are produced at anode and travel towards cathode.
The balanced two-half reactions will be:
Oxidation half reaction : [tex]M\rightarrow M^{n+}+ne^-[/tex]
Reduction half reaction : [tex]N^{n+}+ne^-\rightarrow N[/tex]
Thus the overall reaction will be: [tex]M+N^{n+}\rghtarrow M^{n+}+N[/tex]
Part A
How many moles of chlorine gas are needed to make 0.6 moles of sodium chloride?
Given the reaction: 2Na + Cl2 + 2NaCl
O 1.2
O 0.6
0 3.6
O 0.3
not enough information
Submit
Request Answer
Answer:
[tex]n_{Cl_2}=0.3molCl_2[/tex]
Explanation:
Hello there!
In this case, according to the given chemical reaction whereas the sodium chloride is in a 2:1 mole ratio with chlorine, the required moles of the later are computed as shown below:
[tex]n_{Cl_2}=0.6molNaCl*\frac{1molCl_2}{2molNaCl}[/tex]
So we cancel out the moles of NaCl to obtain:
[tex]n_{Cl_2}=0.3molCl_2[/tex]
Best regards!
What do you plan to do this weekend !
( Giving out Branliest ) <3
Answer:
Go to the pool , Bake, sleep, Watch ,Movies, go out with my freinds<3
Explanation:
The nature particle model of matter describe the property of solid, liquid and gas in molecular level. Which of the given statements below is TRUE?
A. Matter is made up of large particles.
B. Particles of matter have spaces between them.
C. Particles of matter are not moving all the time.
D. The particles of matter do not attract each other.
Answer:
B. Particles of matter have spaces between them.
Explanation:
The particle nature model of matter is an model used to explain the properties and nature of matter. The statements of the particle nature model of matter are as follows :
1. Matter is made of small particles of atoms or molecules.
2. The particles of matter have space between them. The spaces between the particles are least in solids as they are closely packed together but are greatest in gases whose particles are far apart from each other.
3. The particles of matter are in constant motion at all times. Solids particles are not free to move due to strong molecular forces between the particles, but are constantly vibrating in their mean positions. Liquid particles free to move due to lesser molecular forces while gas molecules which have negligible intermolecular forces have the greatest ability to move.
4. The particles of matter are attracted to each other by intermolecular forces. These forces are greatest in solids and least in gases.
The correct option is B.
select two correct answers
Answer:
D and E
Explanation:
The other answers don't support steel, they support iron or are supporting both, and the question is why steel alloys are more often used
C supports both
B supports how iron's strength
A supports iron being easily shaped and bent
hope this helps
Only animals and not plants can adapt to their environment true or false
Answer:
true
Explanation:
np have a good day brainliest?
what is the formula for tin(III) sulfate
Answer:
SnSO₄
Explanation:
Tin(II) sulfate is a chemical compound. It is a white solid that can absorb enough moisture from the air to become fully dissolved, forming an aqueous solution; this property is known as deliquescence.
Answer:
please give me brainlist and follow
Explanation:
SnSO₄
Due today! Why is it a good idea to have floating cities?
A: We are running out of land
B: We need it for pollution cleanup
C: Oceans are rising
D: It's a sustainable way to live
Answer:
in my opinion I think the answer the be "A"
A 1.4639-g sample of limestone is analyzed for Fe, Ca, and Mg. The iron is determined as Fe2O3 yielding 0.0357 g. Calcium is isolated as CaSO4, yielding a precipitate of 1.4058 g, and Mg is isolated as 0.0672 g of Mg2P2O7. Report the amount of Fe, Ca, and Mg in the limestone sample as %w/w Fe2O3, %w/w CaO, and %w/w MgO
Answer:
A) w/w % of Fe - 2.44%
B) w/w % of Mg - 4.590%
C) w/w % of Ca - 96%
Explanation:
A) w/w % of Fe in limestone as Fe2O3 = (Mass of Fe2O3 /Mass of limestone) x 100
0.0357/1.4639 X 100
= 2.438 =2.44
B) w/w % of Mg in limestone as Mg2P2O7 = (Mass of Mg2P2O7 /Mass of limestone) x 100
= 0.0672/1.4639 X 100
= 4.590
C) w/w % of Ca in limestone as CaSO4 = (Mass of CaSO4/Mass of limestone) x 100
= 1.4058/1.4639 X 100
= 96
Answer:Fe =1.71% Ma=0.99% Ca=28.24%
Explanation:
6.3x10-5M. What is the pH?
Answer:
https://sensorex.com/ph-calculator/
Explanation:
go to this link and then scroll down a little bit and then you'll find the answer
CHEMISTRY HELP ASAP
Use this balanced equation for the two questions below:
2KClO3(s) → 2KCl(s) + 3O2(g)
9. How many moles of KClO3 are used to produce 9.9 moles of O2?
10. How many moles of O2 are produced from 11.2 moles of KClO3?
PLS SHOW WORK TOO THX
Answer:
1 mole of KClO_3 contains 3 moles of O.
10 moles of O_2 contains 20 moles of O.
You need 20/3 moles of KClO_3 to produce 10 moles of O_2
Explanation:
sana makatulong
How many grams of hydroxide pellets, NaOh are required to prepare 50.0ml of a 0.150 M solution ?
A.0.300g
B.3.00g
C.2.00g
D.200.g
E. 0.025 M
calculate the percentage of CL in AL(CLO3)3
Answer:
46.41%
Explanation:
Find the total r.m.m of AL(CLO3)3 put it equals to 100%.....The take 106.5,the total r.m.m of Cl and find the missing which is the percentage by cross multiplication
What type of consumer eats only producers?
Answer: Primary consumers make up the second trophic level. They are also called herbivores. They eat primary producers—plants or algae—and nothing else. For example, a grasshopper living in the Everglades is a primary consumer
Answer:
primary consumer make up the second trophic level .they are also herbivores they eat primary consumer plants or alger and nothing else .for example a grasshopper living in the everglades is a primary consumer
Humans are always consumers. Most humans are omnivores, but some
humans eat only plant matter making them herbivores. However, all
humans are considered to be -
Select one:
autotrophs
heterotrophs
producers
carnivores
Answer:
A. Autotrophs
Explanation:
an autotroph, def an organism that is able to form nutritional organic substances from simple inorganic substances such as carbon dioxide.
humans and other mammals, plants, and a select few other things
What is the greatest concentration of pollution
Answer:
B
Explanation:The poisonous substances, present in the environment can easily get into the trophic level as living organism depends on each other and environment for food and nutrition. These poisonous substances may not be broken down in the body or excreted easily, efficiently and quickly. Instead, they accumulate in the tissues, and as the living organism eats more, the concentration of these substances increases and they pass from one trophic level to the next. The tertiary consumer being at the top of trophic levels receives the maximum pollutant. This phenomenon is known as biological magnification.
So, the correct answer is option B.
Because a water molecule has a negative end and a positive end it displays?
Answer:
A water molecule displays polarity by having negative and positive ends. Due to this charge difference, a water molecule is called a dipole.
Explanation:
Identify the Lewis base in this balanced equation: 6 upper H subscript 2 upper O plus UPper C r (upper H subscript 2 upper O) subscript 6 superscript 3 plus. H2O Cr3+ Cr(H2O)63+
The Lewis base that we can see in the equation is [tex]H_{2} O[/tex]
What is the Lewis base?We have to bear in mind that the Lewis base is the substance that is able to donate a pair of electrons. The substances that is able to accept the pair of electrons is what we call the Lewis acid.
The Lewis acid must possess a space for the addition of an electron pair while the Lewis base would have to be a specie that has a lone pair of electrons or has a negative charge. Thus the water molecule would serve as a Lewis base in this regard.
Learn more about Lewis base;https://brainly.com/question/15570523
#SPJ1
Answer:
6 upper H subscript 2 upper O plus UPper C r (upper H subscript 2 upper O) subscript 6 superscript 3 plus.
✔ H2O or A.)
Cr3+
Cr(H2O)63+
which of the following is an example of a chemical change?
cutting a log 2.
dissolving sugar
baking a cake
boiling water
Answer: Baking a Cake
Answer:
Baking a cake
Explanation:
Ape-x aprroved
Calculate the pH of a solution with [H+] = 1.8 x 10^-5 M
Answer:
4.74
Explanation:
pH= -log[H+]
pH= -log(1.8 x 10^-5)= 4.74
Which of the following patients should be admitted as an inpatient at a
hospital?
A. Katie's having her tonsils removed and will be able to go home
shortly after she wakes up from surgery.
B. Phil's having his blood sugar tested and having his annual
physical
c. Salvatore's having a hip transplant and will need to be closely
monitored for a week.
D. Chen's having chest X-rays taken to determine if he has a broken
rib.
SUBMIT
help me plss plss.plsss.plsssplss plsss.plsss plsss plsss plsss
Answer:
1. Distance = 5 cm
Displacement = 1 cm
2. Distance = 7 cm
Displacement = 1 cm
3. Distance = 5 cm
Displacement = -1 cm
4. Distance = 6 cm
Displacement = -2 cm
5. Distance = 4 cm
Displacement = 0 cm
Explanation:
The distance an object travels is a measure of the total ground cobpvered bybthe object without regard to the direction of motion. It is a scalar quantity as it only takes into account magnitude but not the direction of a quantity.
Displacement however, is a measure of how far away or apart an object is from its starting position. It a vector quantity as it takes into account both the magnitude and direction in its measurement.
From the attachment provided, considering forward direction as positive and reverse as negative :
1. When a object moves from point 1 to point 4 and reverses to point 2.:
Distance = from 1 to 4 = 3 cm; from 4 back to 2 = 2 cm; 3 + 2 = 5 cm
Displacement = from 1 to 4 = +3 cm; from 4 back to 2 = -2 cm; 3 - 2 = 1 cm
2. When an object moves from point 1 to 5 and reverses to 2:
Distance = from 1 to 5 = 4cm; from 5 back to 2 = 3 cm; 4 + 3 = 7 cm
Displacement = from 1 to 5 = +4 cm; from 5 back to 2 = -4 cm; 4 - 3 = 1 cm
3. When an object moves from point 1 to 3 and then reverses to 0.
Distance = from 1 to 3 = 2 cm; from 3 back to 0 = 3 cm; 2 + 3 = 5 cm
Displacement = from 1 to 3 = +2 cm; from 3 back to 0 = -3 cm; 2 - 3 = -1 cm
4. When an object moves from point 3 to 5 and then reverses to 1:
Distance = from 3 to 5 = 2 cm; from 5 back to 1 = 4 cm; 2 + 4 = 6 cm
Displacement = from 3 to 5 = +2 cm; from 5 back to 1 = -4 cm; 2 - 4 = -2 cm
5. When an object moves from point 2 to 4 and then reverses to 3.
Distance = from 2 to 4 = 2 cm; from 4 back to 2 = 2 cm; 2 + 2 = 4 cm
Displacement = from 2 to 4 = +2 cm; from 4 back to 2 = -2 cm; 2 - 2 = 0 cm
what is the mass of 1.5 x 10^21 silicon atoms?
Answer:
0. 070g
Mass of 1 Si atom =28.08/6.022*1023
So mass 1.5 *1021*4.6629*10-23
Answer:
[tex]\boxed {\boxed {\sf 0.070 \ g \ Si}}[/tex]
Explanation:
We are given a value of atoms and asked to find the mass. We can complete this in 2 steps.
1. Convert Atoms to Moles
First, we have to convert atoms to moles. We use Avogadro's Number or 6.022 × 10²³. This is the number of particles (atoms, molecules, formula units, etc.) in 1 mole of a substance.
In this case, the particles are silicon atoms. We can set up a proportion.
[tex]\frac { 6.022 \times 10^{23} \ atom \ Si }{1 \ mol \ Si}[/tex]
Multiply by the value of atoms given.
[tex]1.5 \times 10^{21} \ atom \ Si *\frac { 6.022 \times 10^{23} \ atom \ Si }{1 \ mol \ Si}[/tex]
Flip the ratio. This allows the atoms of silicon units to cancel and leave the moles of silicon.
[tex]1.5 \times 10^{21} \ atom \ Si *\frac {1 \ mol \ Si } {6.022 \times 10^{23} \ atom \ Si}[/tex]
[tex]1.5 \times 10^{21}*\frac {1 \ mol \ Si } {6.022 \times 10^{23} }[/tex]
[tex]\frac {1.5 \times 10^{21} \ mol \ Si } {6.022 \times 10^{23} }[/tex]
[tex]0.002490866822 \ mol \ Si[/tex]
2. Convert Moles to Grams
Next, we convert the moles to grams. We use the molar mass, which is found on the Periodic Table. This value is the number of grams in 1 mole of a substance. Look for silicon (Si).
Si: 28.085 g/molUse this value as a ratio.
[tex]\frac {28.085 \ g \ Si}{1 \ mol \ Si}[/tex]
Multiply by the number of moles we calculated.
[tex]0.002490866822 \ mol \ Si *\frac {28.085 \ g \ Si}{1 \ mol \ Si}[/tex]
The moles of silicon units cancel, so we are left with grams.
[tex]0.002490866822 *\frac {28.085 \ g \ Si}{1}[/tex]
[tex]0.002490866822 *{28.085 \ g \ Si}[/tex]
[tex]0.06995599469 \ g \ Si[/tex]
3. Round
Finally we must round our answer. The original value has 2 significant figures, so our answer must have the same. For the number we calculated, that is the thousandth place.
[tex]0.069\underline95599469 \ g Si[/tex]
The 9 tells us to round the other 9 to a 0, then the 6 to a 7.
[tex]0.070 \ g \ Si[/tex]
The mass of 1.5 × 10²¹ silicon atoms is 0.070 grams of silicon.
40 POINTS!!! Ice at 0.0 degrees C is combined with 50.0g of water at 75.0 degrees C. Calculate the grams of ice present initially if the entire mixture comes to a final temperature of 25.0 degrees C after the ice melts. Specific heat of water is 4.18 J/goC. SHOW WORK!
Answer:
mi = 31.28 g
Explanation:
According to the law of conservation of energy:
[tex]Heat\ Gain\ by\ Ice = Heat\ Lost\ by\ Water\\m_iL = m_wC\Delta T\\[/tex]
where,
mi = mass of ice = ?
L = Latent heat of fusion of ice = 334 J/g
mw = mass of water = 50 g
C = specific heat of water = 4.18 J/g.°C
ΔT = change in temperature of water = 75°C - 25°C = 50°C
Therefore,
[tex]m_i(334\J/g) = (50\ g)(4.18\ J/g.^oC)(50^oC)[/tex]
mi = 31.28 g