If the radiant energy from the Sun comes in as a plane EM wave of intensity 1340 W/m2, calculate the peak values of E and B

Answer:

There are [tex]3.372 \times 10^{22}[/tex] molecules in a cubic centimeter of water at ordinary pressure and temperature.

Explanation:

Let suppose that liquid is water at a pressure of a atmosphere and a temperature of 25 ºC. Due to incompresibility of liquids, water density does not have any change of importance due to changes in pressure and temperature.

Density and molar mass of water are 1 gram per cubic centimeter and 18.015 grams per mole. The mass of water in a cubic centimeter ([tex]m[/tex]), measured in grams, is:

[tex]m = \rho\cdot V[/tex]

Where:

[tex]\rho[/tex] - Density, measured in grams per cubic meter.

[tex]V[/tex] - Volume of the sample, measured in cubic meters.

Given that [tex]\rho = 1\,\frac{g}{cm^{3}}[/tex] and [tex]V = 1\,cm^{3}[/tex], the mass of water is:

[tex]m = \left(1\,\frac{g}{cm^{3}} \right)\cdot (1\,cm^{2})[/tex]

[tex]m = 1\,g[/tex]

The amount of moles ([tex]n[/tex]) inside the sample is:

[tex]n = \frac{m}{M}[/tex]

Where:

[tex]m[/tex] - Mass of the sample, measured in grams.

[tex]M[/tex] - Molar mass, measured in grams per mole.

If [tex]m = 1\,g[/tex] and [tex]M = 18.015\,\frac{g}{mole}[/tex], then:

[tex]n = \frac{1\,g}{18.015\,\frac{g}{mole} }[/tex]

[tex]n = 0.056\,mole[/tex]

According to the Avogadro's Principle, there are [tex]6.022\times 10^{23}[/tex] molecules per mole. Hence, the number of molecules in a cubic centimeter of water at ordinary pressure and temperature is determined by simple rule of three:

[tex]x = (0.056\,mole)\times\left(6.022\times 10^{23}\,\frac{molecules}{mole} \right)[/tex]

[tex]x = 3.372\times 10^{22}\,molecules[/tex]

There are [tex]3.372 \times 10^{22}[/tex] molecules in a cubic centimeter of water at ordinary pressure and temperature.

Answer:

(a) 2.75 fm

(b) 2.89 fm

(c) 4.70 fm

(d) 7.12 fm

Explanation:

For a given element, the radius r of its nuclei is given by;

r = r₀[tex]A^{(1/3)}[/tex]

Where;

A = Atomic mass of the element

r₀ = 1.2 x 10⁻¹⁵m = 1.2fm

Now let's solve for the given elements

(a) ¹²₆C

Carbon element => This has an atomic mass number of 12

Therefore its radius is given by;

r = 1.2  x [tex]12^{1/3}[/tex]

r = 1.2 x 2.29

r = 2.75 fm

(b) ¹⁴₇N

Nitrogen element => This has an atomic mass number of 14

Therefore its radius is given by;

r = 1.2  x [tex]14^{1/3}[/tex]

r = 1.2 x 2.41

r = 2.89 fm

(c) ⁶⁰₂₇Co

Cobalt element => This has an atomic mass number of 60

Therefore its radius is given by;

r = 1.2  x [tex]60^{1/3}[/tex]

r = 1.2 x 3.92

r = 4.70 fm

(d) ²⁰⁸₈₂Pb

Lead element => This has an atomic mass number of 208

Therefore its radius is given by;

r = 1.2  x [tex]208^{1/3}[/tex]

r = 1.2 x 5.93

r = 7.12 fm

Answer:3) variable affinities (stickiness) for something it is running past. Physical ... -measurement number (significant digits) unit (such as inches) -Significant ... Mass 1 oz. 28.25 g. Relations Between English and Metric Units Mass 1 dram. 1.772 g ... -graduated cylinder has an error of about 1% (± 0.1 mL in 10 mL). -Volumetric

Explanation:

Answer:

1. 28.25 mL, three significant digits.

2. 54.074 mL, three significant digits

3. 600.006 km, four significant digits

4. 1356 kg + 4.2 kg + 19.891 kg

Explanation:

Answer:

An example of operational definition of the term weight of an object, operationalized to a degree, would be the following: "weight is the numbers that appear when that object is placed on a weighing scale"

Answer:

Yes, lava is a liquid, that cools into rock, which is a solid.

Complete Question

Calculate the average volume per molecule for an ideal gas at room temperature and atmospheric pressure. Then take the cube root to get an estimate of the average distance between molecules. How does this distance compare to the size of a molecule like [tex]N_2[/tex]?

Answer:

The  average volume per molecule is  

   [tex]\frac{V}{N} = 4.09 *10^{-26} \ m^3/molecule[/tex]

 The average distance between molecules

  [tex]d = 3.45 *10^{-9} \ m[/tex]

The size of  [tex]N_2[/tex] is 100 times smaller than the obtained value  

Explanation:

From the question we can deduce that we are considering an ideal

Generally the ideal gas equation is mathematically represented as

       [tex]PV = NkT[/tex]

Here  T  is the room temperature with value  T  =  300  \ K  

     k is the Boltzmann constant with value  [tex]k = 1.38 *10^{-23} \ J/K[/tex]  

      P  is the atmospheric pressure with value  [tex]P = 1.0 *10^{5} \ N/m^2[/tex]

     N is the number of molecules

Now  the  volume per molecule is mathematically deduced from the above equation as

        [tex]\frac{V}{N} = \frac{kT}{P}[/tex]

=>      [tex]\frac{V}{N} = \frac{ 1.381 *10^{-23} * 300}{ 1.0*10^{5}}[/tex]

=>      [tex]\frac{V}{N} = 4.09 *10^{-26} \ m^3/molecule[/tex]

Now the distance is mathematically evaluated as

      [tex]d = \sqrt{\frac{V}{N} }[/tex]

=>    [tex]d = \sqrt[3]{4.09*10^{-26}}[/tex]

=>     [tex]d = 3.45 *10^{-9} \ m[/tex]

Generally the size of  [tex]N_2[/tex]  is  115 pm which is  100 times smaller  than the  obtained value  

  Generally the size of  [tex]H_2O[/tex] is  [tex]95.84 \ pm[/tex] which is  10 times smaller than the obtained value  

Based on the ideal gas equation, the calculated values are as follows:

The average volume per molecule is calculated using the given formula derived from the ideal gas equation:

where:

At room temperature and atmospheric pressure;

T = 300 k

P = 1.0 × 10^5 N/m^2

Substituting the values in the equation above to calculate the average volume per molecule, V/n:

V/n = 1.38 × 10^-23 × 300/1.0 × 10^5 N/m^2

V/n = 4.09 × 10^-23 m^3/molecule

Thus, the average volume per molecule is 4.09 × 10^-23 m^3/molecule

The average distance between molecules can be determined by using the formula:

[tex]d = \sqrt[3]{ \frac{v}{n} } [/tex]

Substituting the values for V/n

[tex]d = \sqrt[3]{4.09 \times {10}^{ - 23} } [/tex]

d = 3.45 × 10^-9 m or 3.45 nm

Therefore, the average distance between molecules is 3.45 nm

A molecule of N2 has an average size of 115 pm or 0.115 nm.

Comparing the two values:

3.45/0.115 = 30

Therefore, the N2 molecule is about 30 times smaller than the average distance between molecules.

Learn more about distance between molecules ans Ideal gas equation at: https://brainly.com/question/14375674

https://brainly.com/question/25290815

Answer:

81,725 N/m^2

Explanation:

Given the following :

Height of water = 2m

Density of water = 1000kg/m^3

Atmospheric pressure (Pat) = 101325 N/m^2

Lowest pressure (Pl) can be obtained thus ;

Pat - Pl = density × height × acceleration due to gravity

101325 - Pl = 1000 × 2 × 9.8

101325 - Pl = 19600

101325 - 19600 = Pl

Lowest pressure (Pl) = 81,725 N/m^2

81,725 N/m^2 = (81,725/101325) atm

= 0.8065630 = 0.8065 atm

Answer

density of mercury is 13.6 g/ml and that 1 lb = 0.45 kg.

Answer:

they are describing their displacement since displacement is nothing but distance along with the direction of motion

Explanation:

Heat is a form of energy that can transfer from hot body to cold body.Temperature is the degree of hotness and coldness of a body.

Heat is measured in joules, but temp. is measured in Kelvin

Answer:

temperature is the degree of hotness and coldness of the body or an object while heat is the energy transferred from hot to a cooler object as a result if differencein temperature ☺

Complete Question

Two spherical shells have a common center. A -1.6 x 10-6 C charge is spread uniformly over the inner shell, which has a radius of 0.030 m. A +5.1 x 10-6 C charge is spread uniformly over the outer shell, which has a radius of 0.15 m.What are the magnitude and direction of the electric field at a distance 43.5 mm from the center of the shells.

Answer:

The magnitude is  [tex]E = 7.6021*10^{6} \N/C[/tex]

The direction is radially inward toward the center

Explanation:

From the question we are told that

   The charge on the inner shell is  [tex]q_i = -1.6*10^{-6} \ C[/tex]

    The  radius of the inner shell is  [tex]c_1 = 0.030 \ m[/tex]

   The  charge on the outer shell is  [tex]q_o = 5.1*10^{-6}\ C[/tex]

     The  radius of the outer shell is  [tex]c_2 = 0.15\ m[/tex]

   The distance considered is  [tex]r = 43.5 \ mm = 0.0435 \ m[/tex]

Generally the electric field at the position considered is mathematically represented as

          [tex]E = \frac{Q_c }{4\pi r^2 \epsilon_o }[/tex]

Here  [tex]Q_c[/tex] is the charge  which is enclosed by the distance considered which in this case is the charge on the inner shell

  So  [tex]Q_c =q_i = -1.6*10^{-6} \ C[/tex]

Hence

          [tex]E = \frac{-1.6 *10^{-6} }{4* 3.142 *0.0435^2* 8.85*10^{-12} }[/tex]

 =>      [tex]E = -7.6021*10^{6} \N/C[/tex]

The negative sign is show that the direction of the field is radially inward toward the center

Answer:

Average speed is 5 m/s

Explanation:

The initial speed = 0 m/s (since the runner starts from rest)

Final speed = 10 m/s

time interval = 2 sec

average speed = ?

The speed is assumed to change at a constant rate

Average speed = (final speed + initial speed)/2

==> (10 + 0)/2 = 10/2 = 5 m/s

Answer:

The object will remain where it was placed on the fluid

Explanation:

If an object is immersed in a fluid, with both the object and the fluid having the same density, the force of buoyancy (the force acting upward) will be equal to the gravitational force (the weight pulling the object down) making the object remain in the position it was placed in the fluid. Meaning it will neither sink down or float through the surface.

For practical purpose, it should however be noted that the chances of this happening is very low.

NOTE: When an object is less dense than the liquid/fluid, it will float and when it is more dense than the liquid, it will sink

Answer:

Constructive interference

Explanation:

Because the path difference between them is zero owing to the fact that they are in phase

Answer:

D. The person's force on the box is as strong as the force of the box on the person, but the frictional force on the person is forward and large while the backward frictional force on the box is small.

Explanation:

When a bag is pulled, then it involves a person’s force on the box meaning there is an opposite force which is equal to the force of the box on the person.

When the box is pulled, there is a forward frictional force on the person which is big when compared to the backward frictional force which is small. This positive difference is responsible for the movement of the box.

Answer:

we approach a maximum or minimum the values ​​of the ordinate are closer and closer and when passing this point the values ​​change their trend

Explanation:

The reason for this process occurs because as we approach a maximum or minimum the values ​​of the ordinate are closer and closer and when passing this point the values ​​change their trend if they were rising, they begin to fall and if they were falling they begin to rise. Therefore the maximum point is a point of inflection of the curve since its trend changes.

Another way of looking at this process is that mathematically the point where there is a maximum or a minimum corresponds to the point where the first derivative is equal to zero, this is the slope of the line is horizontal, so the points before after correspond to values ​​with slope of different sign.

Complete question:

Currents in dc transmission lines can be 100 A or higher. Some people are concerned that the electromagnetic fields from such lines near their homes could pose health dangers. For a line that has current 150 A and a height of 6.0 m above the ground, what magnetic field does the line produce at ground level?

Answer:

The magnetic field the line produces at ground level is 5 x 10⁻⁶ T.

Explanation:

Given;

current in the dc transmission line, I = 150 A

height above ground level, R = 6 m

The transmission line will be treated as current in a long straight wire.

Thus, the magnetic field produced at the ground level is given as magnetic field in a long straight conductor.

[tex]B = \frac{\mu_o I}{2\pi R}[/tex]

where;

μ₀ is permeability of free space = 4π x 10⁻⁷ T.m/A

[tex]B = \frac{4\pi*10^{-7} * 150}{2\pi * 6}\\\\B = 5*10^{-6} \ T[/tex]

Therefore, the magnetic field the line produces at ground level is 5 x 10⁻⁶ T.

Answer:

B) less than 700 N

Explanation:

Given;

normal weight of the person, W = 700 N

An elevator moving upward but slowing down at a steady rate, shows that upward force is less than downward force, thus, the reading on the scale will be  less than 700 N.

Also, from Newton's second law

R - mg = ma

where;

R is the reading on the scale

mg is the weight of the person = W = 700 N

a is negative acceleration upward = -a

R - mg = -ma

R = mg - ma

Thus, If this person is standing on a bathroom scale inside the elevator, the scale will read less than 700 N.

B)  less than 700 N.

Answer:

Lift, weight, thrust and drag.

Answer:

According to Newton's first law of motion (inertia), an object at rest will remain at rest, or an object in motion will continue in motion at the same speed and in the same direction, until an outside force acts on it. For an aircraft to taxi or fly, a force must be applied to it. It would remain at rest without an outside force. Once the aircraft is moving, another force must act on it to bring it to a stop. It would continue in motion without an outside force. This willingness of an object to remain at rest or to continue in motion is referred to as inertia.

Newton's Second Law of Motion

The second law of motion (force) states that if a object moving with uniform speed is acted upon by an external force, the change of motion (acceleration) will be directly proportional to the amount of force and inversely proportional to the mass of the object being moved. The motion will take place in the direction in which the force acts. Simply stated, this means that an object being pushed by 10 pounds of force will travel faster than it would if it were pushed by 5 pounds of force. A heavier object will accelerate more slowly than a lighter object when an equal force is applied.

Newton's Third Law of Motion

The third law of motion (action and reaction) states that for every action (force) there is an equal and opposite reaction (force). This law can be demonstrated with a balloon. If you inflate a balloon with air and release it without securing the neck, as the air is expelled the balloon moves in the opposite direction of the air rushing out of it.

Answer:

The constant of proportionality between charge and voltage is the capacitance.

Explanation:

The capacitance ([tex]C[/tex]), measured in farads, is the ratio of charge to voltage, that is:

[tex]C = \frac{Q}{V}[/tex]

Where:

[tex]Q[/tex] - Charge, measured in coulombs.

[tex]V[/tex] - Voltage, measured in volts.

If charge is clear, it is easy to concluded that capacitante is a constant of direct proportionality.

Hence, the correct answer is B.

The answer is B

Explanation:

Every action has an equal reaction. If you punch a wall, the wall is going to exert the wall with exert the same amount of force back towards your hand, causing your hand to hurt.

Answer:

a.  According to Newton's Third Law, the force you put into the wall with your punch causes the wall to put the same force back onto your hand.

Explanation:

I got it correct.

Answer:

16∠45° Ω

Explanation:

Applying,

Z = V/I................... Equation 1

Where Z = Impedance, V = Voltage output, I = current input.

Given: V = 120cos(10t+75°), = 120∠75°,  I = 7.5cos(10t+30) = 7.5∠30°

Substitute these values into equation 1

Z = 120cos(10t+75°)/7.5cos(10t+30)

Z = 120∠75°/ 7.5∠30°

Z = 16∠(75°-30)

Z = 16∠45° Ω

Hence the impedance of the linear network is 16∠45° Ω

Answer:

v = 6.20 10⁻¹² m / s,   v =  1.96 10⁻²  cm/year

Explanation:

This is a kinematics problem, specifically of uniform motion

        v = d / t

let's reduce the magnitudes to the SI system

      d = 8.8 km (1000 m / 1 km) = 8.8 10³ m

      t = 45 10⁶ years (365 day / 1 year) (24 h / 1 day) (3600 s / 1h)

       t = 1,419 10¹⁵ s

let's calculate the speed

        v = 8.8 10³ / 1.1419 10¹⁵

         v = 6.20 10⁻¹² m / s

This is the correct unit of the SI system, but it is more common to give the value in centimeters per year, so let's reduce the value

       v = 8.8 105 / 45 106

       v =  1.96 10⁻²  cm/year

Answer: 80

Explanation: 7.2 hours x 60mph = 432 m

7.2 hrs - 1.8 hrs= 5.4 hrs

432m/5.4hrs = 80

Answer: 80 mph

Explanation:

Just is

Answer:

Corkscrew, bicycle, scissors

Explanation:

they are made from many simple machine's

Answer:

compound meachiun include bicycles, cars, scissors, and fising rods with reels.

Explanation:

It is given that,

The object distance from the lens is 10 cm, u = -10 cm

Image is formed at a distance of 40 cm away from the lens, u = 40 cm

The lens formula is : [tex]\dfrac{1}{v}-\dfrac{1}{u}=\dfrac{1}{f}[/tex], v is image distance

[tex]\dfrac{1}{40}-\dfrac{1}{-10}=\dfrac{1}{f}\\\\f=8\ cm[/tex]

The focal length is 8 cm

Magnification,

[tex]m=\dfrac{v}{u}\\\\m=\dfrac{40}{-10}\\\\m=-4[/tex]

The magnification is negative, it means that the formed image is inverted.

Answer:

The magnetic field at the center of the loop is 2.51 × 10⁻³ T

Explanation:

The magnetic field at the center of a circular loop is given by

B = μ₀I/2r

Where B is the magnetic field strength in Teslas (T)

μ₀ is the permeability of free space

μ₀ = 4π ×10⁻⁷ N/A²

I is the current in Amperes (A)

and r is the radius of the loop in meters (m)

From the question,

r = 1.0 cm

Convert this to meter (m)

1.0 cm = 1.0 × 10⁻² m = 0.01 m

∴ r = 0.01 m

I = 40 A

Hence, the magnetic field at the center of the loop is

B = μ₀I/2r

B = (4π ×10⁻⁷ × 40) / (2 × 0.01)

B = 5.0265 × 10⁻⁵ / 0.02

B =  2.51 × 10⁻³ T

Hence, the magnetic field at the center of the loop is 2.51 × 10⁻³ T