if the electric field at a distance r away from charge q is 36 n/c, what is the ratio of the electric fields at r, 2r, and 3r?

For myself and my loved ones, I would wish for good health, happiness, and success so that even if my wish did not come true, I would still have the things that matter most in life.

To interact with individuals from all over the world and fully appreciate all cultures, I would first wish for the capacity to comprehend and speak all languages with ease. This would significantly improve my capacity for international travel and communication. My second desire is for unrestricted riches and resources so that I might support charity causes, assist people in need, and have a constructive effect on society. To enjoy my money and resources and carry on having a beneficial influence on the world, a long and healthy life is my third and last wish.

learn more about wish here:

https://brainly.com/question/18404859

#SPJ4

According to Newton's third law of motion, the ball imparts an equal and opposite force on the bat. i.e 290 N

Given that,

The mass of the ball = .145 kg

initial velocity of 35 m/s

collision lasts 0.005 seconds

final velocity of the ball is 25 m/s

We have momentum = mass x velocity.

a) Initial momentum = 0.145*35 = 5.075 kg-m/s

b) Final momentum = 0.145*25 = 3.625 kg-m/s

c) Change in momentum = 5.075 - 3.625 = 1.45 kg-m/s

Impulse = Force x time = change in momentum

F = change in momentum/time = 1.45/0.005 = 290 N

d) By Newton's third law of motion, the ball imparts an

     equal and opposite force on the bat.

    therefore, Force = 290 N.

Learn more about Force here :

https://brainly.com/question/13191643

#SPJ4

Answer: I am not sure about this but here you go

he overall displacement of the particle, δx, is equal to the final position of the particle minus its initial position. Since the initial and final velocities of the particle are given, the displacement can be calculated using the equation δx = vft - vit, where vf is the final velocity, vi is the initial velocity, and t is the time interval. In this case, δx = 18.0 m/s11.5 s - 29.0 m/s11.5 s = -131 m. Therefore, the overall displacement of the particle is -131 m.

The speed of the car is 200 km/hour.

The velocity of the car is 200 km/hour in south direction.

The rate at which a body's displacement changes in relation to time is known as its velocity. Velocity is a vector quantity with both magnitude and direction. SI unit of velocity is meter/second.

Distance travelled is = 150 km.

Time taken is = 45 minute = 0.75 hour.

Hence, the speed of the car is = 150/0.75 km/hour = 200 km/hour.

As  the car is traveling south, the velocity of the car is 200 km/hour in south direction.

Learn more about velocity here:

https://brainly.com/question/18084516

#SPJ1

The speed of the of the object if the force is tripled is 12.12 m/s.

The centripetal force acting on an object moving in a circular path is calculated by applying the following formula as shown below.

F = mv² / r

where;

F = ( 5 x 7² ) / 3.5

F = 70 N

When the force is tripled, the new force becomes;

F' = 3 x 70 N

F' = 210 N

The new speed of the object is calculated as follows;

F = mv² / r

v² = Fr / m

v = √ ( Fr / m )

v = √ ( 210 x 3.5 / 5 )

v = 12.12 m/s

Learn more about centripetal force here: https://brainly.com/question/20905151

#SPJ1

Answer:

a=2m/s^2

Explanation:

F=ma => a=F/m=100/50=2m/s^2

Given that plutonium has an atomic mass of 244 and 94 protons per atom, there are 1.48108 C coulombs with positive charge present in 1.54 per kg plutonium.

The particle possesses an electrical charge that is positive and opposite to the electron's. A single protons would weigh only 1.673? 10-27 kilograms if it were isolated, which is just a little bit less than a neutron.

Although protons were once thought of as elementary particles, the Standard Model of subatomic particles now recognizes them as composite particles made up of three valence quark, and they are grouped alongside neutrons as hadrons.

To know more about protons visit:

https://brainly.com/question/12535409

#SPJ4

An experiment using gravity lead students to the conclusion that gravity affects the speed of objects.

This is thanks to the experiment that they conducted, which showed that objects fall faster when released from a higher height than when released from a lower height. This indicates that gravity is accelerating the objects as they fall.

The rate of acceleration is proportional to the force of gravity, meaning that the more gravity that is present, the faster the objects will fall. This means that the higher the height, the greater the force of gravity and the faster the objects will fall.

Students can also conclude that the time taken for an object to fall is greater from a lower height than one from a higher height. This is because the higher the height, the greater the force of gravity, meaning that the objects reach their terminal velocity quicker. Terminal velocity is the maximum speed an object will reach, and this can be reached quicker from higher heights.

Overall, students can conclude that gravity affects the speed of objects as they fall and that the higher the height, the faster the objects will fall. This is due to the force of gravity increasing with height, meaning that the objects reach their terminal velocity quicker, leading to faster falls.

Learn more about gravity here:

https://brainly.com/question/14874038

Answer:

1. Mass is the measure of the amount of matter in an object.

2. The objects do not have the same size, shape, or mass, so any differences in drop times cannot be attributed to one variable.

3. Gravity is a force that attracts objects with mass toward each other.

4. by repeating the experiment several times

5. The longer an object falls, the more gravity increases its speed.

The acceleration increases as the graph becomes more steep. A horizontal line indicates a constant speed of motion for the object. The object is slowing down when the line slopes downward.

Motion is the change in an object's location with relation to time. Motion can be heard in a book dropping off a table, water running from the faucet, rattling windows, etc. Even the air we breathe is in motion!

Motion in physics is the shift in an object's location in relation to its environment over a specific period of time. Following phrases can be used to describe how a mass-containing object moves: Displacement. Distance. Speed.

To know more about Motion visit:

https://brainly.com/question/22810476

#SPJ1

Answer:

Explanation:

Highest  →  Lowest frequency

Violet→Indigo→Blue→Green→Yellow→Orange→Red

Hence, The net electric field flux is 2. 26* 10^ 5 N m2/C.

The physical field that surrounds electrically charged particles and exerts force on all other charged particles in the field, either attracting or repelling them, is known as an electric field. It also refers to the physical field of a charged particle system. The electric field can be thought of as an electric property associated with any point in space where a charge exists in any form. The electric force per unit charge is another way to describe an electric field. The formula for the electric field is E = F /Q. Volts per metre (V/m) is the SI unit for the electric field. This unit is the same as Newton's per coulomb. These are derived units in which Newton is a unit of force and Coulomb is a unit of charge.

Here,

Charge, Q=2.00 uC

Electric field E = 100 N/C i

Radius R = 10.0 cm

We need to find the flux. It can be calculate using Gauss's law

The flux of the net electric field,

flux=Q/E0

=2*10^-6/8.85*10^-12

=2.26*10^5 Nm²/C

Hence, The flux of the net electric field is 2. 26 × 10^5 N · m^2/C.

To know more about electric field,

https://brainly.com/question/12868371

#SPJ4

The total energy of the system remains constant and is equal to the gravitational potential energy of the object at the top of the incline.

Gravitational potential energy is the energy stored in an object due to its position in a gravitational field. This energy is determined by the objects mass, height and the strength of the gravitational field. Gravitational potential energy increases as the object moves higher from the ground and its mass increases. Gravitational potential energy can be converted into kinetic energy when an object falls or moves down a slope.

The total kinetic energy of a rolling object is the sum of the rotational kinetic energy about the center of mass and the translational kinetic energy of the center of mass.

To learn more about gravitational potential energy
https://brainly.com/question/15849218
#SPJ4

Complete Question:
Darcel runs the simulation for the large version of each object. What can he say in general about the energies of the objects in the simulation as they roll down the incline? (Select all that apply.)

"The total energy of the system remains constant and is equal to the gravitational potential energy of the object at the top of the incline.""The total kinetic energy of a rolling object is the sum of the rotational kinetic energy about the center of mass and the translational kinetic energy of the center of mass.""The translational kinetic energy is always greater than the rotational kinetic energy.""The potential energy of the system remains constant, and is equal to the total energy."

Gold 7,600 pounds, Silver 83,600 pounds, palladium 3,040 pounds and

Copper 3,040,000 pounds.

What is meant by pounds?

To learn more about pounds refer to

https://brainly.com/question/498964

#SPJ4

The work that is done by the ball is 2.73J.

We have to note that the net force has to do with the force that we can obtain from the Newton's law. We have to note that from the use of the Newton's law that we are going to have that;

F = ma

F = force

m = mass

a = acceleration

Assuming the time to be 1s

a = 12.7 - 0/1

a = 12.7m/s^2

Then the work that is done is obtained by the use of the formula stated above as follows;

F = 0.430kg * 12.7m/s^2

F =  2.73J

Learn more about work done:https://brainly.com/question/13662169

#SPJ1

Friction Force Calculation.

(a) The horizontal force required to accelerate the blocks at 1.4 m/s² is the combined force of friction acting on the three blocks. To find this force, we need to know the coefficient of friction between the blocks and the surface.
According to Table 5.1, the coefficient of friction for oak on oak is 0.4. To find the force of friction, we use the equation: friction force = coefficient of friction * normal force.
The normal force is the force acting perpendicular to the surface and is equal to the combined weight of the three blocks, which is

ma + mb + mc = 4.0 kg + 6.0 kg + 3.0 kg = 13.0 kg. The force of friction is then: friction force = 0.4 * 13.0 kg * 9.8 m/s² = 52.24 N.

(b) To find the force exerted by ma on mc, we need to find the force of friction acting on ma and mc. The force of friction on ma is: friction force = coefficient of friction * normal force = 0.4 * 4.0 kg * 9.8 m/s² = 15.68 N.

The force of friction on mc is: friction force = coefficient of friction * normal force = 0.4 * 3.0 kg * 9.8 m/s² = 11.76 N.

The force exerted by ma on mc is the force of friction on ma + the force of friction on mc = 15.68 N + 11.76 N = 27.44 N

(c) To find the force exerted by mc on ma, we can use the same method as above. The force of friction on mc is: friction force = coefficient of friction * normal force = 0.4 * 3.0 kg * 9.8 m/s² = 11.76 N.

The force of friction on ma is: friction force = coefficient of friction * normal force = 0.4 * 4.0 kg * 9.8 m/s² = 15.68 N.

The force exerted by mc on ma is the force of friction on mc + the force of friction on ma = 11.76 N + 15.68 N = 27.44 N

Learn more about : friction force
https://brainly.com/question/24386803

Answer:

To calculate the average acceleration of the particle, we use the formula a = (vf - vi)/t, where vf is the final velocity, vi is the initial velocity, and t is the time interval. In this case, a = (18.0 m/s - 29.0 m/s)/11.5 s = -2.3 m/s2. Therefore, the average acceleration of the particle is -2.3 m/s2.

The pressure at the bottom of the water layer is 1.22 x 10⁵ Pa

The fluid's weight divided by the surface area gives an estimate of the pressure that the fluid exerts on its surroundings. The density of the fluid can be calculated by multiplying its mass by the acceleration caused by gravity. In this case, we are given that:

Depth of oil (h oil) = 80 cm = 0.8 m

Depth of water (h water) = 140 cm = 1.4 m

Density of water (ρ water) = 1000 kg/m³

Density of oil (ρ oil) = 881 kg/m³

The Standard Atmospheric Pressure (P) = 101325 Pa = 1.01 x 10⁵ Pa

To calculate the pressure due to the weight of liquid, we can use this following formula:

P= ρ g h

Where:

P = pressure

ρ = density of liquid

g = acceleration due to gravity

H = depth of the liquid

To calculate the absolute pressure at the bottom of the water layer, we use:

P(absolute)= P x [ρ(water) × h(water)× g] + [ ρ(oil) × h(oil)× g]

P(absolute) = 1.01 x10⁵ + (1000 x 1.4 x 9.8) + (881 x 0.8 x 9.8)

P(absolute) = 1.01 x10⁵ + 0.21 x 10⁵

P(absolute) = 1.22 x 10⁵ Pa

To learn more about pressure, click here:

https://brainly.com/question/13259324

#SPJ4

A bar magnet will pull unmagnetized iron toward it. A current loop is comparable to an atom. When placed in a bar magnet's magnetic field, a piece of iron, which has magnetic properties, aligns into two poles.

It is the north pole if the north pole reports the side in front of it, and vice versa if the south pole reports the south pole. When placed in a bar magnet's magnetic field, a piece of iron, which has magnetic properties, aligns into two poles.

An atom possesses charges that are in motion, which results in current. The rotational orbits of the atoms allow them to function as an analogous current loop. But despite the absence of current, iron is drawn to magnetic.

To know more about unmagnetized

https://brainly.com/question/16325938

#SPJ4

A michelson interferometer receives beams of monochromatic light. The central spot in the interferometer pattern changes from brilliant to dark and back to bright 1608 times as a result of the movable mirror being moved by 0.301 mm. then the light's wavelength is 3.74.

A waveform signal that is carried in space or down a wire has a wavelength, which is the separation between two identical places (adjacent crests) in the consecutive cycles.

This length is typically set in meters in wireless systems (m) Colors that are monochromatic are all variations of a single hue, including tints, hues, and tones. Lighter and darker shades of the primary color or hue will make up a monochromatic color scheme.

d=mλ / 2

so λ = 2d/m

= {2* 0.301 *10^(-3)}/1608

λ = 0.000602/1608

λ = 3.74

Learn more about monochromatic light Visit: brainly.com/question/1581262

#SPJ4

Clogged main air bleed  is the possible cause of an engine running rich at full throttle if it is equipped with a float type carburetor .

Bleed air is mostly used in civil aircraft to feed the environmental control system with air, which maintains pressure in the cabin. Bleed air is also utilised to prevent ice from forming on important sections of the aircraft, including the wing leading edges. the throttle valve of a carburetor with a float design.

This improves fuel vaporisation and discharge management, especially at low engine speeds. In the carburetor barrel, close to one end of the venturi, is where the throttle, or butterfly valve, is situated. By adjusting the airflow to the engine, it offers a way to control engine speed or power production. The float needle valve is worn or otherwise not seated if a float-type carburetor spills fuel while the engine is turned off.

For such more questions on Vehicle engine:

brainly.com/question/9505366

#SPJ4

If an engine has a float type carburetor, a clogged main air bleed could be the reason why it runs rich when the throttle is fully opened.

Bleed air is mostly utilized in civil airplanes to supply air to the environmental control system, which maintains cabin pressure. Bleed air is also used to stop ice from accumulating on critical areas of the aircraft, such as the wing leading edges. a carburetor's throttle valve with a float arrangement.

This facilitates better fuel vaporization and discharge control, particularly at low engine speeds. The butterfly valve, also known as the throttle, is located inside the carburetor barrel, close to one end of the venturi. It provides a technique to regulate engine speed or power output by changing the airflow to the engine. If a float-type carburetor leaks fuel when the engine is off, the float needle valve is worn or otherwise not seated.

Learn more about Vehicle engine visit: brainly.com/question/9505366

#SPJ4

In the absence of air resistance, the launch angle of the projectile results in the longest range is found to be 45°.

The launch angle may be defined as the vertical angle at which the ball leaves a player's bat after being struck. Average Launch Angle (aLA) is calculated by dividing the sum of all Launch Angles by all Batted Ball Events.

The angle between an input ray and the fiber axis. If the end face of the fiber is perpendicular to the fiber axis, the launch angle is equal to the angle of incidence. The angle of a projectile's initial velocity is definitely calculated when measured from the horizontal direction. These angles are typically 90° or less.

Therefore, in the absence of air resistance, the launch angle of the projectile results in the longest range is found to be 45°.

To learn more about Launch angle, refer to the link:

https://brainly.com/question/14986634

#SPJ4

The height of the balloon when the sandbag was released is 108m which is  moving vertically upwards with a constant speed of 3.00 m/s.

Given the constant speed of hot air balloon (v) = 3m/s

Time taken by the sandbag to fall to the ground (t) = 5s

As the balloon is moving upwards and sandbag is falling downwards they both are in motion opposite to each other.

Let the initial speed of sandbag (u) = 3m/s

Acceleration due to gravity (a) = -9.8m/s^2

From equation of motion we have: s = ut +  1/2at^2

s = 3 x 5 + 1/2(-9.8)(5)^2

s = -108m

Hence the  height of the balloon when the sandbag was released is 108m.

To learn more about speed click here https://brainly.com/question/28224010

#SPJ4

The value of g (gravity on the surface of Pluto is roughly [tex]0.632 m/s^2[/tex]

To find the value of g (speed increase because of gravity) on the surface of Pluto, we can utilize the condition:

[tex]g = GM/R^2,[/tex]

where G is the gravitational steady[tex](6.67 x 10^-11 m^3/kg s^2)[/tex], M is the mass of Pluto, and R is the radius of Pluto.

Since we realize that the mass of Pluto is 1/500 the mass of Earth and the radius of Pluto is 1/15 the range of Earth, we can utilize these qualities to work out g on Pluto.

To begin with, we'll find the mass of Pluto in kg by multiplying the mass of Earth [tex](5.972 x 10^{24} kg)[/tex] by 1/500:

[tex]M = 5.972 x 10^{24} kg * (1/500)[/tex] = [tex]1.1944 x 10^{22} kg[/tex][tex]1.1944 x 10^{22} kg[/tex]

Then, we'll find the radius of Pluto in meters by multiplying the radius of Earth (6,371 km) by 1/15:

R = 6,371 km * (1/15) = 424.73 km = 424,730 m

At long last, we can utilize these qualities to work out g on Pluto:

g = [tex](6.67 x 10^-11 m^3/kg s^2)[/tex] [tex]* (1.1944 x 10^{22} kg)/(424,730 m)^2[/tex]

[tex]g =[/tex] [tex]0.632 m/s^2[/tex]

So the acceleration due to gravity on the surface of Pluto is rough [tex]0.632 m/s^2[/tex], which is around 6.5% of the speed increase because of gravity on the earth.

To learn more about acceleration due to gravity:

https://brainly.com/question/88039

#SPJ4

(a) The tension T2 must be greater than the tension T1 because it is pointing downwards, supporting both masses.

(b) The acceleration of the system is 9.74 m/s².

(c) The tension in T₁ is -0.78 N and T₂ is 1.02 N.

There are two tensions in the cord and their magnitude is obtained from the following equation.

T₁ = m₁a - m₁g

T₁ = m₁ (a - g )

T₂ = m₂g - m₂a

T₂ = m₂ (g - a )

The resultant tension in the cord is determined as;

( T₂ - T₁)R = Iα

where;

( T₂ - T₁)R = I(aR)

where;

T₂ - T₁ = Ia

m₂g - m₂a - ( m₁a - m₁g ) = Ia

m₂g - m₂a - m₁a + m₁g = Ia

- m₂a - m₁a + m₂g + m₁g = Ia

a(m₂ + m₁) + Ia = m₂g + m₁g

a (m₂ + m₁ + I ) = m₂g + m₁g

a = ( m₂g + m₁g ) / ( m₂ + m₁ + I )

I = ¹/₂MR²

I = ¹/₂ x 8.6 x 0.2²

I = 0.172 kgm²

a = ( 17 x 9.8  + 13 x 9.8 ) / ( 17 + 13 + 0.172 )

a = 9.74 m/s²

The tension in the cords is calculated as;

T₁ = m₁ (a - g )

T₁ = 13 (9.74 - 9.8 )

T₁ = -0.78 N

T₂ = 17 (9.8 - 9.74 )

T₂ = 1.02 N

Learn more about tension here: https://brainly.com/question/24994188

#SPJ1

Answer: Some elements like potassium, uranium, and thorium are naturally radioactive and give off gamma rays as they decay, but all elements can be excited by collisions with cosmic rays to produce gamma rays. The HEND and Neutron Spectrometers on GRS directly detect scattered neutrons, and the Gamma Sensor detects the gamma rays.

Explanation: searching

Speed is defined as the rate of change of distance over time. It has the dimension of distance x time. The SI unit of speed is a combination of the base unit of distance and the base unit of time. The SI unit for speed is meters per second.

Speed is the speed at which an object's position changes, measured in meters per second. For example, if an object starts at the origin and moves 3 meters in 3 seconds, its speed is 1 meter/second. A car's speedometer only has positive numbers, but it can run backwards. This is because it measures speed based on the distance the car travels, not the direction the car is heading.

Learn more about Speed

brainly.com/question/13263542

#SPJ4

"Endurance" is the capacity to perform tasks for longer than a few minutes. Endurance, which typically refers to aerobic capacity, is the capacity to maintain an activity for prolonged periods of time.

Endurance, which typically refers to aerobic capacity, is the capacity to maintain an activity for prolonged periods of time.

The more repetitions you could perform, the stronger your muscle endurance was.

To know more about the Endurance, here

https://brainly.com/question/15585123

#SPJ4

The light will refract and pass through the water's surface at an angle of incidence greater than the critical angle if the angle of incidence is 30 degrees, leading to total internal reflection.

How does a substance's refractive index impact the angle of refraction?

A substance's refractive index is a measurement of how much light is bent as it passes through it. The angle of refraction increases with increasing refractive index. The angle of refraction increases as light travels from a medium with a lower refractive index, like air, to a medium with a higher refractive index, like water or glass. Because of this, as light enters the higher refractive zone, it bends more sharply. .

To know more about Reflection visit:

https://brainly.com/question/26642069

#SPJ4

Water vapour, or the gaseous state of water, results from the vibration of the water molecules when it is heated. Some of these water molecules escape into the air as steam as a result. It is called evaporation because of this.

What sort of transformation takes place when water boils and turns into steam?

A shift in temperature causes a physical change in water as it boils and transforms into steam.

What kind of energy is transferred to moving water in a boiling pot?

Thermal energy can be seen in the boiling of water on a stove. When a substance's atoms and molecules vibrate more quickly as a result of a rise in temperature, thermal energy is created.

What does evaporation mean?

A liquid transforms into a gas during evaporation. It is simple to picture when puddles of rain "vanish" on a hot day or when wet clothing dries in the sun. In these instances, the liquid water is evaporating into a gas known as water vapor rather than really dissipating.

Visit this link to learn more about evaporation and steam: brainly.com/question/15738157

#SPJ4

The conversion of a liquid into a gas is known as evaporation.The global water cycle includes it as one of its three key stages.

To learn more about evaporation refer

https://brainly.com/question/24258

#SPJ4

The net charge on a droplet separating from the stream will be (b) Negative.

The charge on a droplet affects its interaction with other charged objects based on the principle of electrostatics, which states that like charges repel each other and opposite charges attract each other. A droplet that carries a positive charge will experience a repulsion force when it comes into contact with another positively charged object. On the other hand, a droplet that carries a negative charge will experience an attraction force when it comes into contact with a positively charged object. The strength of this interaction is dependent on the magnitude of the charges and the distance between the droplet and the other charged object.

To know more about Droplet visit: https://brainly.com/question/2926487

#SPJ4