If the earth rock takes 2.00 s to reach its highest point, how long will it take the moon rock to do so

Answers

Answer 1

12.0 s

Explanation:

First, let's find the initial vertical velocity of the rock on earth. We know that

vy = v0y - gt

where g = 9.8 m/s^2. When the rock reaches its highest point, vy = 0. So if it takes 2.00 s to reach the maximum height, the initial velocity of the rock is

v0y = (9.8 m/s^2)(2.00 s) = 19.6 m/s.

We know that the moon only has 1/6 of earth's gravity. Therefore, if the same rock is given the same vertical velocity as on earth, then the time it takes to reach its maximum height is

voy = gt ---> t = voy/g

t = (19.6 m/s)/(9.8/6 m/s^2)

= 12.0 s


Related Questions

What is the total current in a parallel circuit containing a 12-V battery, a 2 Ω resistor, and a 4 Ω resistor?

Answers

Answer:

V=IR

since the circuit is parallel both resistor have same voltage and different current value according to OHMs law.

total resistance in parallel=

1/R=1/R1+1/R2+...+1/Rn

since we have two resistor in parallel

Rt=R1R2/R1+R2

2*4/2+4=4/3 ohms

I=V/R

12/4/3=36/4=9Amp

OR

I=12/2=6amp

I=12/4=3amp

total current

I=6+3

9amp

3. Suppose you take a pendulum with length L and mass m having a period T to a
planet where the value of g is 176 of the value on Earth. What would be the period
of the pendulum on the planet? *
T/6
OT
O 1.6T
2.4 T
4.6 T
help fast

Answers

(C)

Explanation:

[tex]t = 2\pi \sqrt{ \frac{l}{g} } [/tex]

If g is only 1/6 on another planet, then

[tex]t = 2\pi \sqrt{ \frac{l}{ \frac{g}{6} } } = 2\pi \sqrt{ \frac{6l}{g} } [/tex]

[tex] = \sqrt{6} \: (2\pi \sqrt{ \frac{l}{g} } ) = 2.4 \times t(on \: earth)[/tex]

The ratio of the focal length of a lens to it's diameter is the​

Answers

Answer:

The f-ratio describes the relationship between the lens diameter and the focal length and is calculated by dividing the focal length by the diameter of the lens. For example, if a lens were to have a focal length of 50mm and a diameter of 10mm, then the f-ratio would be 50mm/10mm=5 or otherwise referred to as f5.

Explanation:

Answer:

The f-ratio describes the relationship between the lens diameter and the focal length and is calculated by dividing the focal length by the diameter of the lens. For example, if a lens were to have a focal length of 50mm and a diameter of 10mm, then the f-ratio would be 50mm/10mm=5 or otherwise referred to as f5.

Explanation:

i just want a thank you :)

100 POINTS AND BRAINLIEST

Answers

Answer:

b

Explanation:

The materials are most likely used to change the surface area of the ramp. For example, the sand paper can change the ramp's texture. The wax paper can also change the surface area of the ramp by texture, it can be made smoother.

Answer:

B.

Explanation:

Hope it helped!

The atmospheric features of Neptune are easier to see than those of Uranus because A. Neptune has greater warmth and less haze. B. Neptune has more methane. C. The atmosphere of Uranus rotates differentially. D. Uranus has no significant atmosphere.

Answers

If I’m being honest I think it’s a or b

Answer:

Option B is the correct answer (Neptune has more methane)

Explanation:

From the options given,

The atmospheric features of Neptune are easier to see than those of Uranus because Neptune has more methane

Neptune has small amount of methane and water which gives it blue colour and white patches which distinguish it from uranus

For more information, visit

http://abyss.uoregon.edu/~js/ast121/lectures/lec20.html

An electron is constrained to the central perpendicular axis of a ring of charge of radius 2.2 m and charge 0.021 mC. Suppose the electron is released from rest a distance 0.050 m from the ring center. It then oscillates through the ring center. Calculate its period. (The electron is always much closer to the ring center than a radius.)

Answers

Answer:

T = 1.12 10⁻⁷ s

Explanation:

This exercise must be solved in parts. Let's start looking for the electric field in the axis of the ring.

All the charge dq is at a distance r

           dE = k dq / r²

Due to the symmetry of the ring, the field perpendicular to the axis is canceled, leaving only the field in the direction of the axis, if we use trigonometry

            cos θ =[tex]\frac{dE_x}{dE}[/tex]

             dEₓ = dE cos θ

              cos θ = x / r

substituting

                dEₓ = [tex]k \frac{dq}{r^2 } \ \frac{x}{r}[/tex]

                DEₓ = k dq x / r³

let's use the Pythagorean theorem to find the distance r

             r² = x² + a²

where a is the radius of the ring

we substitute

              dEₓ = [tex]k \frac{x}{(x^2 + a^2 ) ^{3/2} } \ dq[/tex]

we integrate

               ∫ dEₓ =k \frac{x}{(x^2 + a^2 ) ^{3/2} }  ∫ dq

               Eₓ = [tex]k \ Q \ \frac{x}{(x^2+a^2)^{3/2}}[/tex]

In the exercise indicate that the electron is very central to the center of the ring

                x << a

                Eₓ = [tex]k \ Q \frac{x}{a^3 \ ( 1 +(x/a)^2)^{3/2})}[/tex]

if we expand in a series

                  [tex](\ 1+ (x/a)^2 \ )^{-3/2} = 1 - \frac{3}{2} (\frac{x}{a} )^2[/tex]

we keep the first term if x<<a

                 Eₓ = [tex]\frac{ k Q}{a^3} \ x[/tex]

the force is

                 F = q E

                 F = [tex]- \frac{kQ }{a^3} \ x[/tex]

this is a restoring force proportional to the displacement so the movement is simple harmonic,

                 F = m a

                 [tex]- \frac{keQ}{a^3} \x = m \frac{d^2 x}{dt^2 }[/tex]

                 [tex]\frac{d^2 x}{dt^2} = \frac{keQ}{ma^3} \ x[/tex]

the solution is of type

                  x = A cos (wt + Ф)

with angular velocity

                w² = [tex]\frac{keQ}{m a^3}[/tex]

angular velocity and period are related

                 w = 2π/ T

             

we substitute

               4π² / T² = \frac{keQ}{m a^3}

                T = 2π  [tex]\sqrt{\frac{m a^3 }{keQ} }[/tex]

let's calculate

                T = 2π [tex]\sqrt{ \frac{ 9.1 \ 10^{-31} \ 2.2^3 }{9 \ 10^9 \ 1.6 \ 10^{-19} \ 0.021 \ 10^{-3} } }[/tex]

                 T = 2π pi [tex]\sqrt{320.426 \ 10^{-18} }[/tex]

                 T = 2π  17.9 10⁻⁹ s

                 T = 1.12 10⁻⁷ s

A nearsighted person has a far point of 25.525.5cm and is prescribed contact lenses to correct her vision. What lens strength (a.k.a., lens power), in Diopters, should be prescribed

Answers

Answer:

The right answer is "-3.90 D".

Explanation:

According to the question,

Far point,

v = -25.525 cm

and,

u = [tex]\infty[/tex]

By using the lens formula, we get

⇒ [tex]\frac{1}{f} =\frac{1}{v} -\frac{1}{u}[/tex]

On putting the values, we get

⇒     [tex]=\frac{1}{-25.525} +\frac{1}{\infty}[/tex]

⇒  [tex]f=-25.525 \ cm[/tex]

or,

⇒     [tex]=-25.6 \ cm[/tex]

hence,

⇒ [tex]Power (P)=\frac{100}{f}[/tex]

⇒                  [tex]=\frac{100}{-25.6}[/tex]    

⇒                  [tex]=-3.90 \ D[/tex]

1 point
What is the speed of a wave that has a frequency of 200 Hz and a
wavelength of 2 meters? Express your answer to the nearest whole
number. (wave speed = wavelength * frequency) *
400 m/s
100 m/s
0.01 m/s

Answers

Answer:

just multiply the frequency and wavelength

200× 2

400

3 نقطة (نقاط)
السؤال 2
A block slides on a rough horizontal surface from paint A to point B. A force (magnitude P -
2.0 N) acts on the block between A and B, as shown. If the kinetic energies of the block at A
and B are 5.0 J and 4.0 J, respectively and the work done on the block by the force of friction
as the block moves from A to B is -4.5 J what is the distance between point A and B?
40°
B​

Answers

The work-energy theorem says that the total work done on the block is equal to the difference of its kinetic energies at points B and A. Then the total work done on the block is

[tex]W_{\rm total} = K_B - K_A = 4.0\,\mathrm J - 5.0\,\mathrm J = -1.0\,\mathrm J[/tex]

Friction acts on the block to oppose its motion, so it does negative work on the block, -4.5 J.

The only other force acting on the block as it moves is the force P. Let [tex]W_P[/tex] be the work done by the force P. Then the total work done on the block is

[tex]W_{\rm total} = W_P + W_{\rm friction} \iff -1.0\,\mathrm J = W_P - 4.5 \,\mathrm J \implies W_P = \boxed{3.5\,\mathrm J}[/tex]

17. This is used to produce a rough sketch with thick and dark ink to make the figure of an image more distinct. A. shading B. Painting C. Outlining D. Sketching​

Answers

Hi so the answer is (C) outlining because it uses to make the the figure more different and darker.

The distance a freely falling object falls from rest is one-half second is?

Answers

Answer:

[tex]s = ut + \frac{1}{2}a {t}^{2} \\ = \frac{1}{2} \times 9.81 \times ({ \frac{1}{2} })^{2} \\ s = 1.22m[/tex]

An athlete is performing squats in the weight room. The knee is going from anatomical position to 92 degrees and then back to anatomical position each squat. The athlete performs a total of 10 squats. This is done over a time period of 30 seconds. What is the angular acceleration (rad/sec 2) of the knee

Answers

Answer:

  α = 0.357 ras / s²

Explanation:

This is a rotational kinematics exercise, it tells us that it performs 10 squats in 30 s, for which it performs one squat at t = 3 s, also indicates that the angle of the squat is θ = 92º

            θ = θ₀ + w₀ t + ½ α t²

the athlete starts from rest, whereby w₀ = 0 and the initial angle in the vertical position is zero (θ₀=0)

            θ = ½ α t²

            α = 2 θ /t²

let's reduce the magnitudes to the SI system

            θ = 92º (π rad /180º) = 0.511π rad

let's calculate

            α = 2 0.5111π /3²

            α = 0.1136π rad / s²

            α = 0.357 ras / s²

The average velocity of blood flowing in a certain 4-mm-diameter artery in the human body is 0.28 m/s. The viscosity and density of blood are approximately 4 cP and 1.06 Mg/m3, respectively. Determine the volumetric flow rate of blood in the artery. (m3/s)

Answers

Answer:

V = 3.5 x 10⁻⁶ m³/s = 3.5 cm³/s

Explanation:

The volume flow rate of the blood in the artery can be given by the following formula:

[tex]V = Av[/tex]

where,

V = Volume flow rate = ?

A = cross-sectional area of artery = πd²/4 = π(0.004 m)²/4 = 1.26 x 10⁻⁵ m²

v = velcoity = 0.28 m/s

Therefore,

[tex]V = (1.26\ x\ 10^{-5}\ m^2)(0.28\ m/s)[/tex]

V = 3.5 x 10⁻⁶ m³/s = 3.5 cm³/s

when applied behavior analysis is used properly what happens???​

Answers

Answer:

Applied Behavior Analysis therapy (ABA) is a type of intensive therapy that focuses on the principles and techniques of learning theory to help improve social behavior. ABA therapy helps to (1) develop new skills, (2) shape and refine previously learned skills, and (3) decrease socially significant problem behaviors.

Explanation:

Please help!!!!!!!!!

Answers

Answer:

try S or Q

Explanation:

Look at the Position vs. Time and Velocity vs. Time plots. What is the person's velocity when his position is at its maximum value (around 6 m )

Answers

Answer:

The person's velocity is zero.

Explanation:

how dose an exam question outed from text book​

Answers

Answer:

In which school you are???

Explanation:

A section of a parallel-plate air waveguide with a plate separation of 7.11 mm is constructed to be used at 15 GHz as an evanescent wave attenuator to attenuate all the modes except the TEM mode along the guide. Find the minimum length of this attenuator needed to attenuate each mode by at least 100 dB. Assume perfect conductor plates.

Answers

Answer:

the required minimum length of the attenuator is 3.71 cm

Explanation:

Given the data in the question;

we know that;

[tex]f_{c_1[/tex] = c / 2a

where f is frequency, c is the speed of light in air and a is the plate separation distance.

we know that speed of light c = 3 × 10⁸ m/s = 3 × 10¹⁰ cm/s

plate separation distance a = 7.11 mm = 0.0711 cm

so we substitute

[tex]f_{c_1[/tex] = 3 × 10¹⁰ / 2( 0.0711  )

[tex]f_{c_1[/tex] = 3 × 10¹⁰ cm/s / 0.1422  cm

[tex]f_{c_1[/tex] =  21.1 GHz which is larger than 15 GHz { TEM mode is only propagated along the wavelength }

Now, we determine the minimum wavelength required

Each non propagating mode is attenuated by at least 100 dB at 15 GHz

so

Attenuation constant TE₁ and TM₁ expression is;

∝₁ = 2πf/c × √( ([tex]f_{c_1[/tex] / f)² - 1 )

so we substitute

∝₁ = ((2π × 15)/3 × 10⁸ m/s) × √( (21.1 / 15)² - 1 )

∝₁ = 3.1079 × 10⁻⁷

∝₁ = 310.79 np/m

Now, To find the minimum wavelength, lets consider the design constraint;

20log₁₀[tex]e^{-\alpha _1l_{min[/tex] = -100dB

we substitute

20log₁₀[tex]e^{-(310.7np/m)l_{min[/tex] = -100dB

[tex]l_{min[/tex] = 3.71 cm

Therefore, the required minimum length of the attenuator is 3.71 cm

A 70 kg stunt pilot begins pulling out of a dive into a vertical circle. If the plane's speed at the lowest point of the circle is 80 m/s, what is the apparent
weight of the pilot at the lowest point of the pullout? The pilot experiences a force of 5g from the centripetal acceleration at the bottom of the dive.
O
3880 N
о
3430 N
0
4116 N
3986 N

Answers

Answer:

Apparent weight of pilot due to centripetal acceleration:

m v^2 / R = 5 g m = 5 * 70 * 9.8 = 3430 N

Weight of pilot = 70 * 9.8 = 686 N

Total = 3430 + 686 = 4116 N

the removal of rock in solution by acidic rain water________​

Answers

Answer:

Solution

Explanation:

Solution is a process in chemical weathering and it is the process of dissolving or removing rock in a solution through the activities of acid rain or solution. Chemical weathering refer to the process where rocks interact with chemical solutions or acid rain which can result in His integration.

Astronauts on a distant planet set up a simple pendulum of length 1.2 m. The pendulum executes simple harmonic motion and makes 100 complete vibrations in 280 s. What is the magnitude of the acceleration due to gravity on this planet

Answers

Answer:

If you use P = 2 * pi * (L / g)^1/2  for the period of the simple pendulum

g = 4 * pi^2 * 1.2 / 2.8^2 = 6.04 m/s2

Note: omega = 2 pi * f = 2 pi / P  and omega = (g / L)^1/2

Answer:

6.0426 m/s^2

Explanation:

The period of a simple pendulum is equal to 2pi sqroot L/g

T = 280s/100 rev = 2.8s

Plug in 1.2 m for L and 2.8s for T, then solve for g to get 6.04 m/s^2 (dependent on how you round)

What effect does the Duck Velocity have on the waves seen by the observer?

Towards the boat:

Away from the boat:

Same as the boat:

Answers

not sure if this would answer your question but heres what i found: When the duck and boat move towards each other, the boat sees a higher frequency of waves from the duck. When they move away from one another, the boat sees a lower frequency of waves from the duck.

How are soil and air similar?

Answers

Answer:

The air in the soil is similar in composition to that in the atmosphere with the exception of oxygen, carbon dioxide, and water vapor. In soil air as in the atmosphere, nitrogen gas (dinitrogen) comprises about 78%. In the atmosphere, oxygen comprises about 21% and carbon dioxide comprises about 0.036%.

hope this helps

have a good day :)

Explanation:

Good luck I hope it’s right

BRAINLIST A wave travels at a constant speed. How does the wavelength change if the
frequency is reduced by a factor of 3? Assume the speed of the wave remains
unchanged.
A. The wavelength does not change.
B. The wavelength increases by a factor of 3.
C. The wavelength decreases by a factor of 3.
D. The wavelength increases by a factor of 9.

Answers

I think it will be (c)

A retired bank president can easily read the fine print of the financial page when the newspaper is held no closer than arm's length, 59.1 cm from the eye. What should be the focal length of an eyeglass lens that will allow her to read at the more comfortable distance of

Answers

Answer:

Explanation:

comfortable distance is 25 cm .

He must be using convex lens . In that case rays coming from object placed at 25 cm appears to be coming from 59.1 cm due to converging nature of convex lens.

object distance u = -25 cm

image distance v = -59.1 cm

Lens formula

1 / v - 1 /u = 1 /f

-1 / 59.1 + 1 / 25 = 1/f

- .0169 + .04 = 1 / f

.0231 = 1 / f

f = 43.3 m

On a rectangle with length 100 m, width 50m and 2 vehicles stationed together. Find the time that they meet given that car A travels 5 m/s and leaves 3 seconds before car B, and car B is traveling at 3 m/s in the opposite direction. Can you create a generic equation from the previous scenario

Answers

Answer:

[tex]T=35.625sec[/tex]

Explanation:

From the question we are told that:

Length [tex]L=100 m[/tex]

Width [tex]W=50m[/tex]

Velocity of Car A [tex]V_A=5m/s[/tex]

Velocity of Car B [tex]V_B=3m/s[/tex]

Distance traveled by car A before car B moves

[tex]d_l=5*3[/tex]

[tex]d_l=15[/tex]

Therefore total distance traveled at same time interval

[tex]D=total\ distance-d_l[/tex]

Where

Total distance=Perimeter of rectangle

[tex]P=2(L+B)[/tex]

[tex]P=2(100+50)[/tex]

[tex]P=300[/tex]

Therefore

[tex]D=total\ distance-d_l[/tex]

[tex]D=300-15\\D=285m[/tex]

Generally the equation for time taken to meet is mathematically given by

[tex]T=\frac{Distance D}{Relative\ speed V_r}[/tex]

Where

Relative speed = Speed of car A +Speed of car B

[tex]V_r=V_A+V_B[/tex]

[tex]V_r=5+3[/tex]

[tex]V_r=8m/s[/tex]

Therefore the time taken to meet

[tex]T=\frac{ D}{ V_r}[/tex]

[tex]T=\frac{ 285}{ 8}[/tex]

[tex]T=35.625sec[/tex]

. A thin layer of a transparent material with an index of refraction of 1.31 is used as a non-reflective coating on a surface of glass with an index of refraction of 1.43. What should the minimum thickness of the material be for it to be

Answers

Answer:

The minimum thickness of the material is 114.5 nm

Explanation:

The remaining part of the question is as follows

What should the minimum thickness of the material be for it to be nonreflecting for light of wavelength 600 nm (in a vacuum)? Please give details of your reasoning.

Both reflections occur against a surface of higher index of refraction, so there is a phase shift at each reflection. The phase shifts cancel each other out, so if we want the emerging rays to be out of phase, we must have

Given

Index of refraction = 1.31

Index of refraction = 1.43

As we know

[tex]2 t = \frac{\Lambda}{n} (m+\frac{1}{2})\\[/tex]

Here t is the thickness

[tex]\frac{1}{2}[/tex] represents the phase shift

n is the refraction index

Substituting the given values we get

[tex]t = \frac{\lambda}{4n} \\t = \frac{600}{4*1.31}\\t = 114.5[/tex] nm

A ballistic pendulum is a device for measuring bullet speeds. One of the simplest versions consists of a block of wood hanging from two long cords. (Two cords are used so that the bottom face of the block remains parallel to the floor as the block swings upward.) A 0.013-kg bullet traveling at 320 m/s hits a 3.0-kg ballistic pendulum. However, the block is not thick enough for this bullet, and the bullet passes through the block, exiting with one-third of its original speed.

Required:
How high above its original position does the block rise?

Answers

Answer:

0.043 m upwards

Explanation:

The mass of the bullet, [tex]$m_1$[/tex] = 0.013 kg

Mass of the ballistic pendulum, [tex]$m_2$[/tex] = 3 kg

Velocity of the bullet, [tex]$v_1$[/tex] = 320 m/s

Therefore, from the law of conservation of momentum, we get

[tex]$m_1v_1+m_2v_2=m_1v_1^1+m_2v_2^1$[/tex]

[tex]$(0.013 \times 320)+(3 \times 0) = \left(0.013 \times \frac{320}{0}\right) + (3 \times v_2^1)$[/tex]

[tex]$3 \times v_2^1=2.774$[/tex]

[tex]$v_2^1=0.92 \ m/s$[/tex]

Therefore the required height to rise the block is given by :

[tex]$(v_2^1)^2-v_2^2=2gh$[/tex]

[tex]$h=\frac{(v_2^1)^2-v_2^2}{2g}$[/tex]

[tex]$h=\frac{(0.92)^2-0}{2(-9.81)}$[/tex]

[tex]$h=-0.043 \ m$[/tex]

Therefore, the block moves upwards for 0.043 meters.      

When playing tennis, if you hit the ball off of the top end of the racket, an uncomfortable standing wave vibration is produced in the racket. This wave is

Answers

Answer:

Transverse.

Explanation:

Electromagnetic waves is a propagating medium used in all communications device to transmit data (messages) from the device of the sender to the device of the receiver.

An electromagnetic spectrum refers to a range of frequency and wavelength that an electromagnetic wave is distributed or extends. The electromagnetic spectrum comprises of gamma rays, visible light, ultraviolet radiation, x-rays, radio waves, and infrared radiation.

A transverse wave can be defined as a type of wave in which particles of the medium of propagation oscillates or vibrates in a direction that is perpendicular to the direction that the wave moves i.e at right angle to the direction of propagation of the wave.

Basically, sound is a transverse and all transverse wave are the direct opposite of a longitudinal wave that usually travel in the same direction of its oscillation.

Hence, this wave is transverse.

Can someone help me

Answers

The answer is D 10x21
Other Questions
PLEASE HELP. ill give brainliest if you want! Item 5A mold fossil may fill in with sediment.When the sediment hardens, it becomes what type of fossil?trace fossilmold fossilcast fossilpetrified wood What made Edmund realize that the Witch had tricked him into returning? HELP ME Mixing chamber for air and dust isobserved in .... What are the two kinds of ways matter changes? f(x) = 2x^2 - 5x - 15g(x) = -2x - 1find f(g(x)) ... somebody help me :( List Four Sevierville City Departments: Suppose you walk 18.0 m straight west and then 25.0 m straight north. How far are you from your starting point and what is the compass direction of a line connecting your starting point to your final position Which is more likely to melt a cup of ice - a spoonful of boiling water, or a cup of room-temperature For this project you are to create your own country using principles andideas that we have learned/researched. Your imaginary country has just rebelled againstits former colonial master. Your focus will be on the government and laws of thecountry. However, you will need to also include other items in theproject. Thepurposeof this project is to understand how difficult creating a new nation, with all theconsiderations that must go with it, can be. Just think how long it took the FoundingFathers to create the United States.if you can help me somehow please do Mark and Eric have a relationship in which the individuals have made a decision to stay together and work to keep their love going. According to Sternberg's theory of love, their relationship would be said to exhibit which component of love Which of the following describes a difference between 19th century imperialism and forms of imperialism that existed earlier in history Who was fined and convicted for teaching the theory of evolution in a Tennessee public school?a. Nicola SaccoC. John Scopesb. Bartolomeo Vanzettid. Clarence Darrow Which statement best completes the diagram? A. Mecca's leaders converted to Christianity. B. Jewish people were forced to flee Arabia. C. Muslims split into Sunnis and Shiites. D. Warring Arabian tribes became united. Pls help dudndidndiendifn What would you include on a list of things that are currently in your life that are authentically you? 3.) What allows elements larger than iron to form in the universe?a. Black holesb. Small star fusionc. Star explosionsd. Star fission what are factors that affecting the boiling point of liquid? A 9 m ladder rests against the side of a wall. The bottom of the ladder is 1.5 m from the base of thewall. Determine the measure of the angle between the ladder and the ground, to the nearest degree.1 degree80 degrees53 degrees10 degrees