The reaction order for the following conditions are:
a. two
b. two
What do you mean by reaction order?Reaction order is the number of reactants, whose concentration affects the reaction rate.
The reaction order can be determined by adding the exponents of each reactant.
The rate equation is [tex]v^0 = k[A]^x + k[B]^y[/tex]
The first-order reaction is in which the reaction is dependent on one variable concentration.
The second-order reaction is that in which the reaction is dependent upon the concentration of two variables.
Thus, the correct options are a. two, b.two.
Learn more about reaction order
https://brainly.com/question/1769080
A gas at -20c occupies volume 140 ml calculate temperature at which the volume of the gas becomes 65 ml pressure constant
Answer:
–156 °C
Explanation:
The following data were obtained from the question:
Initial temperature (T1) = –20 °C
Initial volume (V1) = 140 mL
Final volume (V2) = 65 mL
Final temperature (T2) =?
Pressure = constant.
Next, we shall convert –20 °C to Kelvin temperature. This can be obtained as follow:
T(K) = T(°C) + 273
Initial temperature (T1) = –20 °C
Initial temperature (T1) = –20 °C + 273 = 253 K.
Next, we shall determine the new temperature of the gas as follow:
Initial temperature (T1) = 253 K
Initial volume (V1) = 140 mL
Final volume (V2) = 65 mL
Final temperature (T2) =?
V1/T1 = V2/T2
140/253 = 65/T2
Cross multiply
140 × T2 = 253 × 65
140 × T2 = 16445
Divide both side by 140
T2 = 16445 /140
T2 = 117 K
Finally, we shall convert 117 K to celcius temperature. This can be obtained as follow:
T(°C) = T(K) – 273
T2 = 117 K
T2 = 117 K – 273
T2 = –156 °C
Thus, the new temperature of the gas is –156 °C
Describe the potential energy of a chemical reaction and how the energy is accessed?
Explanation:
The energy released due to breakage of bond or we can say that protons and electrons go from a structure of higher potential energy to lower potential energy. During this change, potential energy is converted to kinetic energy in form of heat.
Generally chemical potential energy is accessed in form heat, which the difference between the potential energies of reactant and product.
DO NOT TROLL AND ANSWER WITHOUT THE CORRECT ANSWER! I EXPECT THE CORRECT ANSWER NOT A TROLL SO IF YOU DONT HAVE THE ANSWER DO NOT WRITE ANYTHING. IF YOU TROLL I WILL REPORT YOU
A weather balloon with a volume of 3.40774 L
is released from Earth’s surface at sea level.
What volume will the balloon occupy at an
altitude of 20.0 km, where the air pressure is
10 kPa?
Answer in units of L.
Answer: The volume occupied at an altitude of 20.0 km is 34.5289 L
Explanation:
Boyle's Law: This law states that pressure is inversely proportional to the volume of the gas at constant temperature and number of moles.
[tex]P\propto \frac{1}{V}[/tex] (At constant temperature and number of moles)
where,
[tex]P_1[/tex] = initial pressure of gas = 101.325 kPa ( sea level)
[tex]P_2[/tex] = final pressure of gas = 10 kPa
[tex]V_1[/tex] = initial volume of gas = 3.40774 L
[tex]V_2[/tex] = final volume of gas = ?
Now put all the given values in the above equation, we get the final pressure of gas.
[tex]101.325\times 3.40774=10\times V_2[/tex]
[tex]V_2=34.5289L[/tex]
Therefore, the volume occupied at an altitude of 20.0 km is 34.5289 L
Which of the following covalent bonds is the most polar (i.e., highest percent ionic character)?
A) Al I
B) Si I
C) Al Cl
D) Si Cl
E) Si P
Answer:
answer d is correct that works
1. A baseball pitcher won 75% of the games he pitched. If he pitched 43 ballgames, how many games
did he win?
Answer:
He won 32 games.
Explanation:
Another way of expressing 75% is 75/100.
To calculate how many games the baseball pitcher won, we multiply the total of games played (43, in this case) by the percent won:
43 * 75/100 = 32.25 ≅ 32
So the baseball pitcher won 32 games.
Which of these mixtures would NOT be separated by using simple distillation?
Ink and water
Salt and water
Sand and water
There is a golden role of solubility, polar solute dissolve in polar solvent and non polar solute dissolve in non polar solvent. Therefore, the correct option is option B that is Salt and water.
What is solution?Solutions are a homogeneous mixture of two or more substances. A solution is a homogeneous mixture of solvent and solute molecules. Solvent is a substance that is in large amount in solution. solute is the substance which is in small amount in a solution. There are two types of mixture that is homogeneous and heterogeneous. Solution is a homogeneous solution.
Salt and water because salt is transparent and will dissolve into the water among given solute, salt NaCl is a polar solute which will dissolve in polar solvent that is water.
Therefore, the correct option is option B that is Salt and water.
To know more about solution, here:
https://brainly.com/question/13812915
#SPJ2
How many atoms of phosphorus are in 5.70 mol of copper(II) phosphate?
Answer:
Cu3 (PO4)2 contains a total of 2 atoms of phosphorus in just one molecule. (2.10 mol)(6.02214 x 10^23 atoms / mol)(2 phosphorous) = 2.53 x 10^24 atoms of phosphorous per molecule of copper i
Explanation:
What name is given to the elements that appear in the right-most column of the periodic
table?
- Alkali metals
- Alkaline earth metals
- Transition metals
- Noble gases
(NOBLE GASES IS ANSWERR)
Answer:
Noble gases... (You already know...)
Explanation:
The right-most column of the periodic table contains atoms with full electron shells, also known as Noble Gases.
Hope this helped!
Answer:
Noble gases
Explanation:
The six elements listed in the last column of the table (Group 18) of the periodic table are collectively referred to as the noble gases. All of the noble gases have the maximum number of electrons possible in their outer shells (two electrons in helium’s outer shell, and eight electrons for all the others), making them stable.
in which beakers are the particles moving the most slowly
Answer:
A and D
Explanation:
If the net force acting on an object is 0 N, the forces are
Since the forces equal to 0, it's balanced because the object isn't moving.
The properties of compund are different from the properties of their constituenr
Answer: Atoms of carbon and hydrogen
Explanation:
Sugar and Salt in water magnetism, state of matter, or solubility?
please help!!!!
Answer:
solubility
Explanation:
Balance the following equations ___Fe + __O2= ___Fe3O4
how many atoms does sodium hypochlorite have?
Answer:
NaClO; the contained elements ae Na, Cl, O.
Given the following balanced equation, determine the rate of reaction with respect to [Cl2]. If the rate of Cl2 loss is 4.64 × 10-2 M/s, what is the rate of formation of NOCl? 2 NO(g) + Cl2(g) → 2 NOCl(g)
Answer:
[tex]r_{NOCl}=9.28x10^{-2}M[/tex]
Explanation:
Hello!
In this case, given the balanced chemical reaction:
[tex]2 NO(g) + Cl_2(g) \rightarrow 2 NOCl(g)[/tex]
Since there is 1:2 mole ratio between chlorine and NOCl, based on the rate proportions, we can write:
[tex]\frac{1}{-1}r_{Cl_2} =\frac{1}{2}r_{NOCl}[/tex]
It means that for the formation of NOCl, we obtain:
[tex]r_{NOCl}=\frac{2}{-1}r_{Cl_2} \\\\r_{NOCl}=\frac{2}{-1}(-4.64x10^{-2}M)\\\\r_{NOCl}=9.28x10^{-2}M[/tex]
Notice that chlorine is disappearing, which means its rate is negate.
Best regards!
ONLY ANSWER IF YOU PLAY ADOPT ME ON ROB.LOX!!! tell me your best pet and user name in your answer plz.
READ!!!!! p.s. i have a fly ride T rex and more! also, STAY ON THE PAGE SO I COULD RESPOND AND WE COULD PLAY! yay!! :) :)
Answer:
I play!!!!!!!!
Explanation:
Many materials, such as rocks, expand (get larger) when they are heated and contract (shrink) when they are cooled. This change
in size can cause cracks to form and break large rocks into smaller pieces.
In this example, what is caused by heating and cooling?
OA. decay
ОВ.
weathering
OC.
erosion
OD
earthquakes
Answer:
OB: weathering
Explanation:
the cycle of heating and cooling causes stresses called thermal fatigue, this causes the material to break down. In hand, weathering is a physical and chemical process that causes rocks and minerals on the Earth's surface to break down and decompose. Therefore, this matches the process you have described.
Answer:
weathering fun way to imagen it: just imagen u saw ur worst enemie and pretende it is the rock and the wind and ice and water are ur best friends THEN BAM wind and ice and water(ur best friends) make the rock(worst enemie) to dust :D
Which statement describes how phase changes can be diagrammed as a substance is heated?
The phase is on the y-axis and the temperature is on the x-axis.
The temperature is on the y-axis and the phase is on the x-axis.
The time is on the y-axis and the temperature is on the x-axis.
The temperature is on the y-axis and the time is on the x-axis.
Answer:
The temperature is on the y-axis and the time is on the x-axis.
Explanation:
Which statement describes how phase changes can be diagrammed as a substance is heated? (D is the answer)
The phase is on the y-axis and the temperature is on the x-axis.
The temperature is on the y-axis and the phase is on the x-axis.
The time is on the y-axis and the temperature is on the x-axis.
The temperature is on the y-axis and the time is on the x-axis.
Which statement describes the appearance of a temperature-vs.-time graph? (C is the answer)
A horizontal line shows that the temperature increases at a constant rate over time.
A vertical line shows that the temperature decreases at a constant rate over time.
Horizontal lines where the temperature is constant during phase changes connect upward-sloping lines where the temperature increases.
Horizontal lines where the temperature increases are connected by upward-sloping lines where the temperature is constant for each phase.
Weathering is a constructive process.
True or false
Answer: true
Explanation: Collection and analysis of data indicates that constructive forces include crustal deformation, faulting, volcanic eruption and deposition of sediment, while destructive forces include weathering and erosion.
A rigid container filled with a gas is placed in ice (ex. nalgene bottle). What will happen to the pressure of the gas? What do you think will happen to the volume?(Graph)
Explanation:
The pressure will decrease but the volume remains constant
Every element in group one has ______________ electron in its outer shell. Every element in group two has _______________ electrons in its outer shell.
need help
Mr. Juan is husband of Maria, before they get married Maria knows that her husband cannot make a baby since he cant produce sperm. But during their 2 years in marriage, Maria got pregnant. Is Juan can file a case to Maria? What it is? Support your answer?
Answer:
yes but first he need to check himself
Explanation:
bcoz if he cannot produce a sperm than she might have cheated him and the baby might be of someone other.
What is the answer? Please
Answer:
Cell
Explanation:
I just passed this unit a month ago.
Answer:
It is 6. Cell
Explanation:
Cells make up the smallest level of a living organism such as yourself and other living things. The cellular level of an organism is where the metabolic processes occur that keep the organism alive. That is why the cell is called the fundamental unit of life.
I really hope this helped. God bless you and have a great day! :-)
Which of these lead (II) salts will dissolve to the greatest extent in water?
a. PbSO4, Ksp = 1.7x10^-8
b. PbI2, Ksp = 6.5x10^-9
c. PbCrO4, Ksp = 1.8x10^-14
d. PbS, Ksp = 2.5x10^-27
e. Pb3(AsO4)2, Ksp = 4.0x10^-36
Answer:
a. PbSO4, Ksp = 1.7x10^-8.
Explanation:
Hello!
In this case, since the solubility product indicates how likely a solid is able to ionize and consequently dissolve in water, we can infer that the larger the solubility product Ksp, the more ions are able dissolve in water; therefore the proper answer goes with the largest Ksp, which is a. PbSO4, Ksp = 1.7x10^-8 since the power goes closer to 1 than the other options.
Best regards!
Three isotopes of argon occur in nature. Calculate the average atomic mass of argon given the following relative atomic masses and abundances of each of the isotopes.
Isotope Relative Atomic Mass Abundance
Ar-36 35.97 amu 0.337%
Ar-38 37.96 amu 0.063%
Ar-40 39.96 amu 99.600%
a
35.97 amu
b
37.95 amu
c
39.95 amu
d
38.96 amu
Answer:
whats the question
Explanation:
Answer:
Calculate the average atomic mass of argon to two decimal places, given the following relative masses and abundances of each of the isotopes: argon-36 (35.97 amu; 0.337%), argon-38 (37.96 amu; 0.063%), and argon-40 (39.96 amu; 99.600%). ... So the atomic mass of Ar is 0.99639. 96 + 0.0006337. 96 + 0.00337*35.97 = 39.957.
Explanation:
hope this help
Which cannot be chemically broken down into simpler substances?
O compound
O element
O solution
O mixture
Answer:
an element.
Explanation:
it is the purest form
Answer:
b
Explanation:
Elements in the same period have _____ in common?
-
Answer:
The elements that have the same number of energy levels or the orbitals.
Explanation:
They have he same number -- energy levels
If 75J of heat are applied to 8.4 L of a gas at 732 mmHg and 298K, what is the final temperature, in K, of the gas? Cp for an ideal gas is 20.79 J/mol*K.
Answer:
309 K
Explanation:
Step 1: Convert the pressure to atm
We will use the conversion factor 1 atm = 760 mmHg.
732 mmHg × 1 atm/760 mmHg = 0.963 atm
Step 2: Calculate the moles (n) of the ideal gas
We will use the ideal gas equation.
P × V = n × R × T
n = P × V/R × T
n = 0.963 atm × 8.4 L/0.0821 atm.L/mol.K × 298 K
n = 0.33 mol
Step 3: Calculate the temperature change
We will use the following expression.
Q = n × Cp × ΔT
ΔT = Q/n × Cp
ΔT = 75 J/0.33 mol × 20.79 J/mol.K
ΔT = 11 K
Step 4: Calculate the final temperature
T = 298 K + 11 K = 309 K
Determine the molarity of a solution prepared by dissolving 0.198 g of "KHP" (C8H5O4K) in enough water to make 125 mL of solution.
When the solution is found and titrated with aqueous sodium hydroxide, the endpoint is reached after the addition of 27.80 mL of base solution. How many moles of NaOH reacted? What is the concentration of the NaOH?
Answer:
0.007756M KHP; 0.0009695 moles NaOH reacts; 0.03488M NaOH.
Explanation:
Potassium hydrogen phthalate, KHP, is a salt used as standard to determine concentration of basic solutions as NaOH solutions.
To find molarity of the KHP solution we need to convert mass of KHP to moles and divide this in 125mL = 0.125L:
Moles KHP -Molar mass: 204.22g/mol-:
0.198g * (1mol / 204.22g) = 0.0009695 moles KHP
Molarity:
0.0009695 moles KHP / 0.125L = 0.007756M KHP
NaOH reacts with KHP as follows:
NaOH + KHP → Na⁺ + KP⁻ + H₂O
That means 1 mole of NaOH reacts per mole of KHP, that means moles of NaOH that reacts are = Moles of KHP added:
0.0009695 moles NaOH reacts
In 27.80mL = 0.02780L the NaOH was contained. Molarity is:
0.0009695 moles NaOH / 0.02780L =
0.03488M NaOH
Moles of NaOH added will be "0.034".
According to the question,
→ [tex]Molarity = \frac{Number \ of \ moles}{Volume}[/tex]
By substituting the values, we get
[tex]= \frac{0.198}{204}\times \frac{1000}{125}[/tex]
[tex]= 0.0077 \ M[/tex]
Let,
The number of moles added be "[tex]M_2[/tex]".Now,
→ [tex]M_1 V_1 = M_2 V_2[/tex]
→ [tex]0.0077\times 125=M_2\times 27.8[/tex]
→ [tex]M_2 = 0.034 \ moles[/tex]
Thus the above answer is appropriate.
Learn more:
https://brainly.com/question/23931328
What is the difference between Mega and Milli symbols?
Answer:
Mega = 10^6
Milli = 10^-3
Explanation:
Mega is whatever times 10 to 6th power.
Milli is whatever times 10 to the -3rd power.