if load is 10 kn, cross sectionl area is 2 square mm, contact area = 5 square mm. what will be bearing stress?

Given that a railcar of mass 4700 kg hits a bumper at 1.9 m/s and the spring compresses by 0.06 m, we are required to determine the force exerted by the spring on the railcar.

Using the formula for the force exerted by a spring, we get:F = kxwhereF = force exerted by the springk = spring constantx = compression of the springWe need to determine the spring constant k.To find the spring constant k, we use the formula,k = F / xWhere F is the force exerted by the spring and x is the distance by which the spring is compressed. In this case,x = 0.06 m, and the force exerted by the spring can be found as follows:The initial kinetic energy of the railcar is converted into elastic potential energy of the spring.

The total energy of the system is conserved, hence:1/2 mv² = 1/2 kx²wherev = 1.9 m/s (initial velocity)m = 4700 kg (mass of the railcar)x = 0.06 m (compression of the spring)k = spring constantRearranging the above formula, we can find k as,k = m v² / x²k = 4700 × 1.9² / 0.06²k = 5.872 × 10⁷ N/mNow that we have found the spring constant, we can use it to determine the force exerted by the spring:F = kx = 5.872 × 10⁷ × 0.06 = 3.523 × 10⁴ NTherefore, the force exerted by the spring on the railcar is 3.523 × 10⁴ N. Hence, F = 3.523 × 10⁴ N ,Here, we have made use of the spring formula which states thatF = kxwhereF = force exerted by the springk = spring constantx = compression of the springWe have determined the spring constant k ask = m v² / x²and then used it to find the force exerted by the spring on the railcar.

To know more about force visit :

https://brainly.com/question/30526425

#SPJ11

The differential equation governing the displacement of an object in a spring mass system is given by [tex]\(\frac{{d^2x}}{{dt^2}} + 4\frac{{dx}}{{dt}} + 4x = -17x\)[/tex], with initial conditions [tex]\(x(0) = 1\)[/tex] and [tex]\(x'(0)\)[/tex] to be determined.

To solve the differential equation, we can use the method of characteristic equations. First, let's rewrite the equation in a more standard form:

[tex]\(\frac{{d^2x}}{{dt^2}} + 4\frac{{dx}}{{dt}} + 21x = 0\)[/tex]

The characteristic equation corresponding to this differential equation is given by:

[tex]\(r^2 + 4r + 21 = 0\)[/tex]

Solving this quadratic equation, we find that the roots are complex:

[tex]\(r = -2 \pm \sqrt{5}i\)[/tex]

The general solution of the differential equation is then given by:

[tex]\(x(t) = c_1 e^{(-2 + \sqrt{5}i)t} + c_2 e^{(-2 - \sqrt{5}i)t}\)[/tex]

Applying the initial condition [tex]\(x(0) = 1\)[/tex], we have:

[tex]\(c_1 + c_2 = 1\)[/tex]

To determine the value of [tex]\(x'(0)\)[/tex], we differentiate [tex]\(x(t)\)[/tex] with respect to [tex]\(t\)[/tex] and evaluate it at [tex]\(t = 0\)[/tex]:

[tex]\(x'(t) = (-2 + \sqrt{5}i)c_1 e^{(-2 + \sqrt{5}i)t} + (-2 - \sqrt{5}i)c_2 e^{(-2 - \sqrt{5}i)t}\)\\\\\(x'(0) = (-2 + \sqrt{5}i)c_1 + (-2 - \sqrt{5}i)c_2\)[/tex]

Since we are given [tex]\(x'(0)\)[/tex] but not the specific values of [tex]\(c_1\)[/tex] and [tex]\(c_2\)[/tex], we cannot determine the final answer without additional information.

To learn more about displacement refer:

https://brainly.com/question/29769926

#SPJ11

The car travels 72 meters before it stops. When a car is being driven at a rate of 24 m/s when the brakes are applied.

To solve this problem, we need to use the equation:

distance = (initial velocity)^2 / (2 x acceleration)

where initial velocity is 24 m/s and acceleration is -4 m/s^2 (negative because it is decelerating).

Plugging in the values, we get:

distance = (24 m/s)^2 / (2 x -4 m/s^2)

distance = 576 m / (-8 m/s^2)

distance = -72 m

Note that the negative sign indicates that the car is traveling in the opposite direction of the initial velocity. To find the distance traveled in the original direction, we would take the absolute value of the answer, which is 72 m.


d = (v_f^2 - v_i^2) / (2 * a)

where d is the distance traveled, v_f is the final velocity (0 m/s in this case, since the car stops), v_i is the initial velocity (24 m/s), and a is the acceleration (which is negative because it's deceleration, so -4 m/s²).

d = (0^2 - 24^2) / (2 * -4)
d = (-576) / (-8)
d = 72 meters

To know more about car travels visit:-

https://brainly.com/question/13873339

#SPJ11

Tsunami is a long-wavelength wave caused by large-scale disturbances of the ocean, such as earthquakes, volcanic eruptions, and landslides.

The wavelength of the tsunami is given as 270 km and its velocity as 740 km/h. As it approaches Hawaii, people observe an unusual decrease of sea level in the harbors.To determine the time required to reach the shore, we first need to determine the wave speed (v) of the tsunami:Speed (v) = wavelength (λ) x frequency (f)Where f = v/λv = f x λThe velocity of the tsunami is given as 740 km/h, which can be converted to 205.6 m/s.

Therefore, the time for the tsunami to reach the shore is:T/2 = 657.89 s or 11 minutes (rounded to two significant figures).Explanation:A tsunami of wavelength 270 km and velocity 740 km/h travels across the Pacific Ocean. The time required to reach the shore is 11 minutes (rounded to two significant figures). When the tsunami approaches Hawaii, an unusual decrease in sea level in the harbors is observed. The decrease in sea level occurs only once per period, which is calculated to be 21.93 minutes. However, we are only interested in half of the period, since the decrease in sea level occurs only once per period. Therefore, the time for the tsunami to reach the shore is 11 minutes.

To know more about wavelength  visit :

https://brainly.com/question/7143261

#SPJ11

The following is the design of the circuit so that the transistor operates in saturation with Id = 0.5 mA and Vd = 3 V:

In a MOSFET, there are three distinct regions of operation: cutoff, linear (or triode), and saturation. The saturation region is the region of operation in which the drain current is practically independent of the drain-source voltage, so the output voltage does not depend much on the input voltage.A MOSFET transistor can be utilized to operate in saturation region when the applied gate voltage is greater than or equal to the threshold voltage (VGS ≥ VTH), i.e., when the MOSFET is turned ON.

A using the following formula: ID = 1/2 * µn * Cox * (W/L) * (VGS - VTH)2, where µn is the electron mobility, Cox is the gate oxide capacitance per unit area, and W/L is the channel width-to-length ratio. Rearranging this formula to solve for VGS, we get:VGS = VTH + sqrt(ID / (1/2 * µn * Cox * (W/L)))Substituting the given values, we get:0.5 mA = 1/2 * (200 * 10^-4) * 10^-6 * (W/L) * (VGS - 1)VGS = VTH + sqrt(ID / (1/2 * µn * Cox * (W/L))) = 1 + sqrt(0.5 * 10^-3 / (1/2 * 200 * 10^-4 * 10^-6 * W/L)) = 2.8 V (approximately)Finally, we can calculate the value of the resistor RL using Ohm's law, which states that RL = VDD / ID. Substituting the given values, we get:RL = 3 / 0.5 * 10^-3 = 6 kΩ.

To know more about transistor visit:

https://brainly.com/question/31052620

#SPJ11

If we ignore friction, the skier will have the highest speed at the bottom of the steepest hill.

This is because the steeper the hill, the more potential energy the skier will have at the top, which will be converted into kinetic energy (or speed) as they move down the hill. Therefore, the hill with the highest slope will result in the skier having the highest speed at the bottom.
When evaluating which hill will give a skier the highest speed at the bottom, consider these factors: slope steepness and height. Assuming friction is ignored, a skier will have the highest speed at the bottom of the hill with the steepest slope and greatest height, as this will provide the largest gravitational force and potential energy conversion into kinetic energy.

Energy is transmitted to the object once the work is accomplished, at which point it moves at a new, constant speed. Kinetic energy is a type of energy that is present in a particle or object in motion. if work involves the transfer of energy.

learn more about kinetic energy here

https://brainly.com/question/8101588

#SPJ11

The average speed of a gas molecule in a classical ideal gas can be calculated using the formula v = sqrt(3kT/m), where v is the average speed, k is the Boltzmann constant, T is the temperature, and m is the mass of the molecule. The average velocity is zero in a classical ideal gas.

In a classical ideal gas, the molecules are assumed to be point particles with no volume or intermolecular forces acting on them. The average speed of a gas molecule can be calculated using the formula v = sqrt(3kT/m), where v is the average speed, k is the Boltzmann constant, T is the temperature, and m is the mass of the molecule.

This formula assumes that the gas is in thermal equilibrium and that all the molecules have the same kinetic energy. The average velocity, on the other hand, is zero in a classical ideal gas. This is because the molecules move in random directions with equal probability, so their velocities cancel out over time. However, the average speed is not zero, as the molecules still have a nonzero kinetic energy.

Learn more about intermolecular forces here:

https://brainly.com/question/31321043

#SPJ11

The percentage of mammalian proteins that are glycosylated is 50%. The correct answer is option D).

Glycosylation is a process in which proteins are attached to sugar molecules in order to modify their function. This is a common post-translational modification that occurs in both eukaryotic and prokaryotic cells. In mammals, glycosylation is thought to occur in approximately 50% of all proteins, making it a common and important process for regulating protein activity.

Most glycosylated proteins are found on the cell surface, where they play an important role in cell signaling, cell adhesion, and other cellular functions. Other glycosylated proteins are found within cells, where they may regulate gene expression, protein folding, and other cellular processes. In general, glycosylation is a complex and highly regulated process that plays a critical role in maintaining cellular homeostasis and ensuring that proteins function properly.

Learn more about Glycosylation here:

https://brainly.com/question/32510183

#SPJ11

The work done in stretching the spring from its natural length to 10 inches beyond its natural length is 112 lb·in.

The work done in stretching a spring is given by the formula:

[tex]\[ W = \frac{1}{2} k (x_f^2 - x_i^2) \][/tex]

In this case, the spring is stretched 4 inches beyond its natural length, so the initial displacement is 4 inches. The force required to hold the spring at this displacement is 16 lb. We can use Hooke's Law to find the spring constant:

[tex]\[ k = \frac{F}{x_i} = \frac{16 \, \text{lb}}{4 \, \text{in}} = 4 \, \text{lb/in} \][/tex]

Now, we can calculate the work done in stretching the spring to 10 inches beyond its natural length:

[tex]\[ W = \frac{1}{2} (4 \, \text{lb/in}) \left( (10 \, \text{in})^2 - (4 \, \text{in})^2 \right) = 112 \, \text{lb·in} \][/tex]

Therefore, the work done in stretching the spring is 112 lb·in.

To learn more about work done refer:

https://brainly.com/question/28356414

#SPJ11

Camp attendees who have roommates tend to spend more time studying than those who don't have a roommate.

The association between the number of hours spent studying per week and whether they have a roommate for the 100 camp attendees is that camp attendees who have roommates tend to spend more time studying than those who don't have a roommate. This association could be explained by the fact that roommates provide a form of accountability for each other and encourage each other to study.

Moreover, having a roommate may create a competitive environment, motivating camp attendees to work harder than they would if they were alone. On the other hand, attendees without roommates may not have the same social pressure or motivation to study. These factors, among others, may explain the association between the number of hours spent studying per week and whether they have a roommate for the 100 camp attendees.

Learn more about motivation here:

https://brainly.com/question/32256373

#SPJ11

The number of photons per second that strike a 2.00m2 solar panel directly facing the sun on an orbiting satellite is 7.94×1019 photons/s.

The energy of one photon (E) = (hc)/λ, where h is Planck's constant, c is the speed of light in vacuum, and λ is the wavelength. The number of photons (N) that strike the solar panel per second is obtained by dividing the total power by the energy of a single photon.

Therefore, N = (power)/E. The energy of one photon = (6.626 × 10^-34 × 3 × 10^8)/(680 × 10^-9) J = 3.11 × 10^-19 J. The power is 1.37 kW/m² × 2.00 m² = 2.74 kW. Number of photons (N) that strikes the panel every second: N = 2.74 × 10³ / 3.11 × 10^-19N = 7.94 × 10^19 photons/s. Therefore, the number of photons per second that strike a 2.00m² solar panel directly facing the sun on an orbiting satellite is 7.94 × 10^19 photons/s.

Learn more about photons here:

https://brainly.com/question/31591565

#SPJ11

The direction of the induced current in the ring is dependent on the orientation of the ring relative to the solenoid.

When the ring is inserted into the solenoid and a magnetic field is applied, it causes a change in magnetic flux through the ring. According to Faraday's Law of Electromagnetic Induction, this change in magnetic flux induces an electric current in the ring.

The direction of the induced current can be determined using Lenz's Law, which states that the induced current will always flow in a direction that opposes the change in magnetic field. If the magnetic field inside the solenoid is increasing, the induced current in the ring will flow in a direction that creates a magnetic field opposing the increase. Conversely, if the magnetic field inside the solenoid is decreasing, the induced current will flow in a direction that creates a magnetic field opposing the decrease. In both cases, the direction of the induced current in the ring will depend on the direction of the change in magnetic field within the solenoid.

To know more about current visit:

https://brainly.com/question/31051471

#SPJ11

0.195 g of gold is produced when 12.7 A of current is passed through a gold solution for 46.0 min.


First, we have to calculate the charge passed using the formula Q = I × tQ = 12.7 A × 46 min × 60 s/minQ = 34392 Cs = 34392 C / 96500 C/mol (charge of 1 mole of electrons) = 0.356 mol of electrons. Now, we can find the mass of gold produced using the balanced chemical equation: Au3+ + 3e- → Au.

Mass of electrons = 0.356 mol × 6.02 × 1023 electrons/mol × 9.11 × 10-31 kg/electron = 1.95 × 10-8 kg (mass of electrons). Mass of gold = 1.95 × 10-8 kg / (3 mol electrons / 1 mol Au) = 6.50 × 10-9 kg = 0.00650 g ≈ 0.195 g (rounded to 3 significant figures). Therefore, the mass of gold produced when 12.7 A of current is passed through a gold solution for 46.0 min is approximately 0.195 g.

Learn more about current here:

https://brainly.com/question/29119451

#SPJ11

The critical chi-square value for a one-tailed test (right tail) with a level of significance of 0.1 and a sample size of 15 is 23.685. It is important to note that this value is used to determine if the calculated chi-square value is large enough to reject the null hypothesis and conclude that there is a significant difference between the observed and expected frequencies.

To find the critical chi-square value for a one-tailed test (right tail) with a level of significance of 0.1 and a sample size of 15, we need to consult a chi-square distribution table.

First, we need to determine the degrees of freedom (df), which is equal to the sample size minus one (15-1=14). Next, we find the value in the table where the level of significance is 0.1 and the degrees of freedom is 14. This value is approximately 23.685. Therefore, the critical chi-square value for a one-tailed test (right tail) with a level of significance of 0.1 and a sample size of 15 is 23.685. It is important to note that this value is used to determine if the calculated chi-square value is large enough to reject the null hypothesis and conclude that there is a significant difference between the observed and expected frequencies.

To know more about critical chi-square visit:-

https://brainly.com/question/30764639

#SPJ11

Amber uses the Dual Task Paradigm to test the learning of a treadmill rollerblading task, which includes three tasks.

Amber, who aims to test the learning of a treadmill roller blading task, has decided to use the Dual Task Paradigm. This Paradigm requires each learner to perform three tasks. The first task is treadmill rollerblading, while the other two are secondary tasks that need to be done at the same time as the rollerblading task.

The secondary tasks might be verbal questions, puzzle-solving, or memory recall. This dual-task paradigm is used to study the demands and interference of performing two tasks at the same time. The test is an excellent way to study cognitive and attentional processes while measuring learning and performance in motor skills.

The dual-task paradigm measures the extent to which secondary tasks hinder or help the primary task, which is the treadmill rollerblading task. Therefore, by performing these tasks simultaneously, Amber will be able to test and measure the learning of the treadmill roller blading task.

Learn more about paradigm here:

https://brainly.com/question/30077556

#SPJ11

There are 625 functions from a set with four elements to a set with five elements.

To answer this question, we need to use the fundamental counting principle. This principle states that if there are m ways to perform one task and n ways to perform another task, then there are m x n ways to perform both tasks together.

In this case, we need to determine the number of ways to map each element in a set with four elements (let's call it set A) to a set with five elements (let's call it set B). To do this, we need to consider each element in set A and determine how many choices we have for where to map it in set B.

For the first element in set A, there are five choices of where to map it in set B. Similarly, there are five choices for the second element, five choices for the third element, and five choices for the fourth element. Therefore, by the fundamental counting principle, the total number of functions from set A to set B is:

5 x 5 x 5 x 5 = 5⁴ = 625

So, there are 625 functions from a set with four elements to a set with five elements.

To know more about elements, visit:

https://brainly.com/question/31950312

#SPJ11

Doubling the separation distance between the two parallel wires would decrease the force by a factor of 4.

The formula for force between two parallel wires is given as, `F=μI_1I_2l/d` Where; F is force between the wires,μ is the permeability constant (4π×10−7 T⋅m/A), I1 and I2 are the currents flowing through the two wires, l is the length of the wires and d is the separation distance between the wires.

Given; l = 30.0 mI1 = I2 = 6.2 Ad = 0.049 mF = 0.00471 N. When the separation distance is doubled, d = 0.098 m Force, F’ = μI_1I_2l/d′ Where, d′ = 2df′ = μI_1I_2l/2d = F/4f′ = 0.00471/4 = 0.00118 N. As the distance is doubled, the force will decrease by a factor of 4. Therefore, the correct answer is 0.00157 N.

Learn more about force here:

https://brainly.com/question/15583843

#SPJ11

The minimum slit width for the entire pattern to contain 16 diffraction-pattern minima/zeros can be determined using the formula d sinθ = mλ, where d is the slit width, θ is the angle of diffraction, m is the order of the diffraction pattern, and λ is the wavelength of the light.

For a given order m, the angle θ is fixed. Therefore, we can determine the minimum slit width required by calculating the maximum value of m for which there are 16 minima in the diffraction pattern. Assuming we are working with visible light with a wavelength of 550 nm, the minimum slit width is approximately 22.9 microns.

This can be calculated by setting m = 8 and solving for d using the formula. Thus, a slit width of 22.9 microns or smaller would produce a diffraction pattern with at least 16 minima/zeros.

To know more about minimum slit visit:-

https://brainly.com/question/29817343

#SPJ11

Ampere’s law is a relationship between the current flowing in a closed loop and the magnetic field that is tangent to the loop.

The magnetic field is known, the integral form of Ampere’s law can be used to calculate the current enclosed in a loop of any shape. The closed path is called an Amperian loop, and it can be any closed path, including a circle or any other closed curve that circumscribes the current.

According to Ampere's law:∫B⃗.dℓ⃗=μ0IenclosedHere, B⃗ is the magnetic field, Ienclosed is the enclosed current, dℓ⃗ is the path element of the loop.μ0 is the permeability of free space.By symmetry, the magnitude of the magnetic field is constant, and its direction is tangent to the Amperian loop. We choose the path element to be tangential to the loop so that B⃗ and dℓ⃗ are parallel to each other.The Amperian loop for a straight wire carrying a current is a circle that is centered on the wire. If the wire has a radius r and carries a current I, then the magnetic field at a distance r from the center of the wire is given by B=μ0I2πrUsing Ampere's law, the enclosed current for an Amperian loop of radius r that is centered on the wire is Ienclosed=IThe enclosed current is equal to the current flowing in the wire. This result is true for any Amperian loop that circumscribes the current.

To know more about magnetic field visit:

https://brainly.com/question/19542022

#SPJ11

The focal length of the lens is 17.7 cm. The height of the image formed by the new diverging lens is 10.0 cm.

Given that the lens forms a real image that is twice as high as the object, we can use the magnification formula to find the magnification (M) of the lens. The magnification is given by the ratio of the image height (H₂) to the object height (H₁). In this case, H₂ = 2H₁.

We can also use the lens formula, which relates the object distance (u), image distance (v), and focal length (f) of the lens:

1/f = 1/v - 1/u

Since the image formed is real, the image distance (v) is positive. The object distance (u) is given as 26.5 cm.

Using the magnification formula, we have:

M = H₂ / H₁ = 2H₁ / H₁ = 2

By substituting the given values into the lens formula and rearranging the equation, we can solve for the focal length (f):

1/f = 1/v - 1/u

1/f = 1/v - 1/26.5

1/f = (26.5 - v) / (26.5v)

f = (26.5v) / (26.5 - v)

Since the magnification (M) is equal to v/u, we have:

M = v / u

2 = v / 26.5

v = 2 * 26.5

v = 53

Substituting this value into the equation for f:

f = (26.5 * 53) / (26.5 - 53)

f = (26.5 * 53) / (-26.5)

f = -53

However, focal length cannot be negative for a lens. Therefore, we consider the absolute value:

f = |-53| = 53

f ≈ 17.7 cm

Therefore, the focal length of the lens is approximately 17.7 cm.

For the second part of the question:

When a diverging lens with the same focal points as the first lens is used, the height of the image formed by the new lens can be determined using the magnification formula:

M = H₂ / H₁

Given that H₁ = 5.00 cm and H₂ is the height of the image formed by the new lens, we can substitute these values into the magnification formula:

2 = H₂ / 5.00

Solving for H₂, we have:

H₂ = 2 * 5.00

H₂ = 10.00 cm

Therefore, the height of the image formed by the new lens is 10.00 cm.

To know more about magnification, refer here:

https://brainly.com/question/28350378#

#SPJ4

An arc that is swept out by 5 radians on a circle with radius 1 has a length of 5 units. To calculate the length of an arc, we use the formula L = rθ, where L is the length of the arc, r is the radius of the circle, and θ is the central angle in radians.

In this case, r is equal to 1 and θ is equal to 5 radians. Therefore, the length of the arc is L = 1 x 5 = 5 units. It's important to note that the length of an arc is proportional to both the radius of the circle and the central angle in radians.

So, if the radius of the circle were to increase, the length of the arc would also increase proportionally.

To know more about radians visit:-

https://brainly.com/question/28990400

#SPJ11

The output voltage (vo) is 4 volts.

Given the values r1 = 5 kΩ, rf = 10 kΩ, v1 = 10 V, and v2 = 12 V, we can determine vo (output voltage) using the formula for an inverting op-amp amplifier:

vo = -rf * (v1 / r1) + rf * (v2 / r1)

Substituting the values:

vo = -10 kΩ * (10 V / 5 kΩ) + 10 kΩ * (12 V / 5 kΩ)

vo = -2 * 10 V + 2 * 12 V

vo = -20 V + 24 V

vo = 4 V

The output voltage (vo) is 4 volts.

learn more about voltage here

https://brainly.com/question/1176850

#SPJ11

The direction of the electric field at any point on the Z-axis for a uniformly charged ring in the xy plane, centered at the origin with radius a and positive charge q distributed evenly along its circumference, is parallel to the Z-axis. This is because the electric field contributions from opposite points on the ring cancel out in the xy plane, leaving only the component along the Z-axis.

The magnitude of the electric field along the positive Z-axis can be calculated using the formula:

E(z) = (k * q * z) / (z^2 + a^2)^(3/2)

where E(z) is the electric field at a distance z from the origin along the Z-axis, k is the electrostatic constant, q is the total charge of the ring, and a is the radius of the ring.

To know more about electric field visit:-

https://brainly.com/question/11482745

#SPJ11

The inverse square law states that the intensity of a point source is inversely proportional to the square of the distance from the source, meaning if the distance of a point is doubled, the intensity will become one-fourth.

The intensity of the waves from a point source at a distance d from the source is i. The problem is to find out the intensity at a distance 2d from the source. So, the inverse square law formula is applied here. It states that the intensity of a point source is inversely proportional to the square of the distance from the source. It means if the distance of a point is doubled from the source, the intensity of the waves will become one-fourth.

The formula is given below:[tex]I_1/I_2=(d_2/d_1)^2[/tex]

Here, d1 is the distance of the source, d2 is the new distance, I1 is the initial intensity, and I2 is the final intensity.

So, according to the inverse square law,[tex]I_1/I_2=(2d/d)^2=4[/tex]

Therefore, the intensity of waves from a point source at a distance of 2d from the source is 1/4th or 0.25 times of that of the intensity at the distance of d.

To know more about intensity of the waves Visit:

https://brainly.com/question/14368491

#SPJ11

The radius of curvature of the convex side-view mirror is 50.7 cm.

Distance of object from the mirror, u = -16.9 cm, Image height reduction, v/u = 1/2 (As the image height is reduced by one-half). We know that, the mirror formula is given by:1/f = 1/u + 1/v where f is the radius of curvature of the mirror.

Using the given data in the mirror formula, we can get the value of f, which is given by: f = (2u*v)/(u+v). Plugging in the values of u and v in the formula, we get: f = (2*-16.9*8.45)/(-16.9+8.45)f = 50.7 cm. Therefore, the radius of curvature of the convex side-view mirror is 50.7 cm.

Learn more about mirror formula here:

https://brainly.com/question/8512677

#SPJ11

Answer:they have no unpaired electrons in the electron configuration in the orbitals.

Explanation:

give the other person the brainliest please. :) :)

In the case of Darth Maul, his survival after being cut in half is attributed to his strong connection to the dark side of the Force, his determination, and his cybernetic enhancements.

In the Star Wars universe, characters' survival and abilities are determined by the narrative and creative decisions made by the writers and filmmakers. While it is true that Darth Maul survived being cut in half, it's important to remember that each character's resilience and capacity for survival can vary.

In the case of Darth Maul, his survival after being cut in half is attributed to his strong connection to the dark side of the Force, his determination, and his cybernetic enhancements. These factors, combined with his sheer willpower, allowed him to endure and ultimately return in later storylines.

On the other hand, Emperor Palpatine, also known as Darth Sidious, met his demise when he was thrown into the electric chamber on the second Death Star in "Star Wars: Episode VI - Return of the Jedi." The circumstances and outcome of his death were a pivotal part of the story and reflected the narrative arc and resolution of the conflict between the light and dark sides of the Force.

It's worth noting that in the Star Wars universe, Force users' abilities, resilience, and survival can vary depending on various factors such as their connection to the Force, their training, their physical condition, and the circumstances surrounding their encounters. Ultimately, the specific events and outcomes are determined by the creative choices made within the Star Wars storytelling.

To learn more about Force click here

https://brainly.com/question/30507236

#SPJ11

When the displacement of a mass on a spring is ½ a, the fraction of the mechanical energy that is kinetic and potential energy depends on the amplitude of the oscillation, the mass of the object, and the spring constant. Assuming that the spring obeys Hooke's law, the total mechanical energy of the system is given by the equation E = (1/2) k x^2, where k is the spring constant and x is the displacement of the mass from its equilibrium position.

At the point where the displacement of the mass is ½ a, the kinetic energy and the potential energy are equal, so each is half of the total mechanical energy. Therefore, the fraction of the mechanical energy that is kinetic is 1/2 and the fraction that is potential energy is also 1/2.

However, this assumes that the system is frictionless and there is no damping. In reality, there will be some energy lost due to friction and air resistance, and the amplitude of the oscillation will decrease over time. As a result, the fractions of kinetic and potential energy will change over time as the amplitude decreases and energy is dissipated.

In summary, when the displacement of a mass on a spring is ½ a, half of the mechanical energy is kinetic energy and half is potential energy, assuming no damping or friction.

To know more kinetic energy, visit:

https://brainly.com/question/999862

#SPJ11

When the displacement of a mass on a spring is ½ a, half of the mechanical energy is kinetic, and the other half is potential energy.

The mechanical energy of a mass-spring system consists of both kinetic energy (KE) and potential energy (PE). The total mechanical energy (E) is the sum of these two forms:

E = KE + PE

When the displacement of the mass on the spring is ½ a, it means that the mass has moved halfway between its equilibrium position and the maximum displacement. At this point, all of the potential energy has been converted to kinetic energy. Therefore, the kinetic energy is equal to the total mechanical energy:

KE = E/2

Similarly, the potential energy is also equal to the total mechanical energy:

PE = E/2

Thus, when the displacement is ½ a, half of the mechanical energy is kinetic (KE = E/2) and the other half is potential (PE = E/2).

To know more about mechanical energy, refer here:

https://brainly.com/question/29509191#

#SPJ4

Near the equator, cloud cover conditions vary throughout the year, with generally high levels of cloudiness due to the presence of the Intertropical Convergence Zone (ITCZ). The atmospheric pressure near the equator is characterized by lower average values, primarily influenced by the ascending air associated with the ITCZ.

Near the equator, cloud cover conditions are influenced by the Intertropical Convergence Zone (ITCZ), which is a low-pressure area characterized by the convergence of trade winds from the Northern and Southern Hemispheres. The ITCZ is associated with significant cloud development and precipitation, resulting in generally high levels of cloudiness near the equator throughout the year. This cloud cover contributes to the tropical rainforest climate often found in equatorial regions.

Regarding atmospheric pressure, the equatorial region experiences relatively low average values due to the ascending air associated with the ITCZ. As the warm air rises, it creates an area of low pressure at the surface. This low-pressure system encourages the formation of convective clouds and thunderstorms. Consequently, the equatorial region generally exhibits lower atmospheric pressure compared to higher latitudes.

To learn more about atmospheric pressure refer:

https://brainly.com/question/30479323

#SPJ11

The power dissipated by the loop while the magnetic field is changing can be calculated using the equation P=I^2R, where P is power, I is current and R is resistance. To determine the current, we need to use Faraday's law of electromagnetic induction which states that the induced emf is proportional to the rate of change of magnetic flux.

Therefore, we can calculate the emf induced in the loop by taking the derivative of the magnetic flux with respect to time. Once we have the emf, we can calculate the current using Ohm's law, I=V/R. Finally, we can substitute the values of current and resistance into the power equation to determine the power dissipated. Given the resistivity of muscle tissue, the loop would have a resistance of 41.6kω. The answer will depend on the specific values of the magnetic field and its rate of change.

To know more about resistance visit :-

https://brainly.com/question/32301085

#SPJ11