For modest atomic masses, the atom's recoil plays a more significant role. Which two atoms in these molecules would be interconnected if liquid ammonia and water were combined?
What is a hydrogen bond, for instance?
Hydrogen, for instance, is covalently linked to the more electronegative oxygen atom in water molecules (H2O). Therefore, the dipole-dipole interactions between the hydrogen atom of one water molecule and the oxygen atom of another H2O molecule are what cause hydrogen bonding to form in water molecules.
What exactly does the term "hydrogen bond" mean?
The partial positive charge of the hydrogen atoms in some polar molecules causes them to be drawn to the partial negative charge of an atom in another neighboring molecule. A hydrogen bond is the name given to this attraction.
To know more about hydrogen bond visit:
https://brainly.com/question/15099999
#SPJ4
Equal volumes of 0.2 M solutions of lead (II) nitrate and potassium bromide are combined to form lead (11) bromide as a yellow precipitate. Which of the following is the correct net ionic equation for the reaction? (A) Pb 2+ (aq) + 2Br. (aq) → PbBra(s) (B) K. (aq) + NO3- (aq) → KNO3 (s) (C) Pb 2+ (aq) + 2NO3- (aq) + 2K+ (aq) + 2Br. (aq) → PbBr2(s) + 2K+ (aq) + 2NO3- (aq) (D) Pb(NO3)2 (aq) + 2KBr (aq) → PbBr2 (s) + 2KNO, (aq)
Pb+2(aq) + 2Br-(aq) ------ PbBr(s) (option A) is the net ionic equation for the reaction of equal volumes of 0.2 M lead(II) nitrate solutions and potassium bromide for the formation of lead(11) bromide as a yellow precipitate.
Determination of the net ionic equationTo determine the net ionic equation, we start from the balanced equation
Lead Nitrate + Potassium Bromide ------ Lead Nitrate + Potassium Bromide
Balanced equationPbNO3 (aq) + KBr (aq) → PbBr (s) + KNO3 (aq)
Complete ionic equationPbNO3 (aq) + KBr (aq) → PbBr (s) + KNO3- (aq)
Pb+2(aq) + NO3-(aq)+K+(aq)+Br-(aq) ----- K+(aq)+NO3-(aq)+PbBr (S)
Net ionic equationPb+2(aq) + 2Br-(aq) ------ PbBr(s)
Learn more about ionic equations in https://brainly.com/question/29600845
#SPJ4
in the electrolysis of water, how long will it take to produce 9.37 mol h2 in an electrolytic cell through which the current is 74.0 ma?
The total time is =405,189.19 h.
What is time?
Time is the indefinite continued progress of existence and events that occur in an apparently irreversible succession from the past, through the present, to the future. It is the measure in which events can be sequenced, and compared to the events of the past and future. Time is a fundamental quantity that is used to sequence events and to compare the durations of events and the intervals between them. Time is usually divided into units such as seconds, minutes, hours, days, weeks, months and years, and can be further divided into smaller increments such as milliseconds, microseconds and nanoseconds.
The reaction is
2H+(aq)+2e−→H2(g)
To produce 1 mole of hydrogen, 2 moles of electrons are necessary
So to produce 1 mole of hydrogen, 96000×2C are needed.
Number of moles hydrogen =9.37mol
Quantitity of electricity is
Q=9.37⋅2⋅96000C=1799040C
The current is I=74⋅10−3A
Q=It
The time is
t=Q/I=1799040⋅0 /74 x 10−3s = 24,311,351.4 s= 405,189.19 h
To learn more about time
https://brainly.com/question/25566753
#SPJ4
for a process approaching equilibrium, the change in entropy of the universe is . what at equilibrium, the change in entropy of the universe is .
The entropy change of the universe is zero, and the system is at equilibrium.
In a futuristic global, a regime has eliminated struggle by way of suppressing feelings: books, art, and track are strictly forbidden and feeling is a crime punishable by using demise. Click John Preston is a pinnacle-rating government agent responsible for destroying folks who resist those rules.
Equilibrium, in physics, is the situation of a device when neither its state of movement nor its inner power country tends to trade with time. a state of relaxation or balance because of the equal movement of opposing forces. same balance between any powers, influences, and so forth.; equality of effect.
Learn more about equilibrium here:-https://brainly.com/question/18849238
#SPJ4
consider the following chemical reaction: li (s) hcl (aq) ---> what are the products of the reaction? which element is oxidized? which element is reduced? which element is the oxidizing agent? which element is the reducing agent?
An oxidation-reduction (redox) reaction is a chemical reaction that involves a transfer of electrons between two species. Simple way to remember redox reaction is that oxidation is loss and reduction is gain.
How to determine oxidized and reduced elements in a chemical reaction?
Balanced chemical reaction is.
2Li + 2HCl --> 2LiCl + H2
Now, products are, LiCl and H2
Element oxidized is Li because it loses electron to form Li+
Element reduced is H of HCl to form H2 because H in HCl in +1 oxidation state gains one electron to form H2 in zero oxidation state.
Element which is oxidizing agent is one which gets reduced i.e., H of HCl
Element which is reducing agent is one which gets oxidized i.e., Li.
To know more about oxidized and reduced elements click on https://brainly.com/question/18370994
#SPJ4
The half-life of potassium-42 is approximately 12 hours. How long will it take for the radiation level of potassium-42 to drop to 1/16 of its original level?.
As a result, it will take 48 hours for potassium-42 radiation levels to drop to 1/16 of their initial levels.
What is radiation level?The average annual radiation exposure per person in the United States is 6.2 millisieverts (620 millirem), according to the National Council on Radiation Protection and Measurements (NCRP). These average dose's sources are depicted in the pie chart below. The average annual radiation exposure per person in the United States is 6.2 millisieverts (620 millirem), according to the National Council on Radiation Protection and Measurements (NCRP). These average dose's sources are depicted in the pie chart below. The primary source of exposure for the majority of people is naturally occurring background radiation. Although they can exceed 50 mSv/yr, they normally fall between 1.5 and 3.5 millisievert per year.
What radiation level is safe for humans?As low as reasonably possible, but not more than 5,000 millirems. It is advised that the total lifetime exposure not exceed the age times 1,000 millirems. The annual occupational limit for minors under 18 who are exposed to radiation is 500.
To know more about Radiation Level visit:
https://brainly.com/question/16058971
#SPJ4
Be sure to answer all parts.
Select the elements and compounds from the following lists that are gases at room temperature.
Elements
Cl
P
He
Br
F
S
Kr
O
Ge
Compounds
N2O
CO2
LiH
MgS
CaF2
AlCl3
HCl
SiO2
LiBr
The elements F and N are gases at room temperature. Both exists as diatomic gases (N2, F2), the compounds, only CO2 and N2O are gases, others are solid at room temperature.
What is gas?
A sample of matter that develops a uniform density inside a container and conforms to the shape of the container it is held in, despite gravity and regardless of the volume of the container in which it is held.
What is room temperature?
A temperature range that is comfortable for residence by humans is referred to as "room temperature." A person wearing typical attire experiences neither heat nor cold in this temperature range. When utilizing absolute temperature, it is also possible to use 300 K, or 27 o C, as the standard room temperature in science.
The elements F and N are gases at room temperature. Both exists as diatomic gases (N2, F2).
He, Xe and Kr are noble gases, they are monatomic and are gases in room temperature.
Among the compounds, only CO2 and N2O are gases, others are solid at room temperature.
Therefore, the elements F and N are gases at room temperature. Both exists as diatomic gases (N2, F2), the compounds, only CO2 and N2O are gases, others are solid at room temperature.
Learn more about gas from the given link.
https://brainly.com/question/16982523
#SPJ4
was temperature perfectly constant during your test while the water was melting and while it was boiling? explain why or why not.
Because heat is continuously used by the process of altering a substance's state by defeating the forces of attraction between the particles, the temperature of a substance stays constant at its melting and boiling points until all of it melts or boils.
The energy that is given during a change in the state of matter is used to alter the binding energies rather than boost the kinetic energy of the molecules. As a result, the temperature doesn't change. Even when heat is continuously applied, a substance's temperature doesn't change while melting or boiling because the heat is used up to change the state of the substance by dissolving the intermolecular force of attraction. Intermolecular force is the force of attraction that unites two atoms or molecules to form a molecule or other substance. In essence, nature is attractive. It also works between atoms and ions. For matter that is solid, liquid, or gaseous, the intermolecular force differs.
To learn more about intermolecular force of attraction visit here;
brainly.com/question/3400114
#SPJ4
An SN2 reaction is a bimolecular substitution reaction. Bimolecular means that two different compounds are important for determine the rate (kinetics), they are the [select 1] There are two major factors that affect the substrate's reactivity, they are the strength of the [select 2] and the steric hindrance or [select 3]
Choise are below [Select 1] - solvent and substrate - substrate and nucleophile - solvent and nucleophile - leaving group and nucleophile - substrate and leaving group - solvent and leaving group [Select 2] - leaving group - nucleophile - solvent -substrate [Select 2] - polarity of solvent - charge of nucleophile - crowding around leaving group
The compounds are important for determine the rate (kinetics), they are the substrate or electrophile and nucleophile. substrate's reactivity, affected the strength leaving group and the steric hinderance or crowding around.
The SN² reaction is a bimolecular substitution reaction. Bimolecular means that two different compounds are important for determine the rate (kinetics), they are the substrate and the electrophile.
There are two major factors that affect the substrate's reactivity, they are the strength of the leaving group and the steric hindrance or crowding around leaving group.
Thus, An SN² reaction is the bimolecular and substrate and the nucleophile are important for the rate determination.
To learn more about SN² reaction here
https://brainly.com/question/2017803
#SPJ4
A 2. 50-L volume of hydrogen meaured at –196 °C i warmed to 100 °C. Calculate the volume of the ga at the higher temperature, auming no change in preure
Considering no change of pressure, the size of the gas at the high temp is 12.09L.
What occurs when the pressure varies?The equilibrium will move to the side where there are less moles of gas as pressure rises. The equilibrium will move toward the reactants side where there are more gas molecules when the pressure is reduced.
Briefing :
To solve this we assume that the hydrogen gas is an ideal gas. Then, we can use the ideal gas equation which is expressed as PV = nRT. At a constant pressure and number of moles of the gas the ratio T/V is equal to some constant. At another set of condition of temperature, the constant is still the same. Calculations are as follows:
T1 / V1 = T2 / V2
V2 = T2 x V1 / T1
V2 = (100 + 273.15) K x 2.50 L / (-196 + 273.15) K
V2 = 12.09 L
Therefore, the volume would increase to 12.09 L as the temperature is increased to 100 degrees Celsius.
To know more about change in pressure visit :
https://brainly.com/question/12152879
#SPJ4
when 10.58g h2react by the following balanced equation, 32.8g h2o are formed. what is the percent yield of the reaction?
The Percent yield is 65.7%.
As per the reaction:
2H2(g)+O2(g)→2H2O(g)
This translates to two moles of hydrogen generating two moles of water, resulting in an excess of oxygen.
What is percent yeild?
The percentage yield indicates how much product is produced in relation to the maximum mass that may be produced. A reaction's atom economy indicates the proportion of atoms in the reactants that go into producing the intended result.
To determine the percent yield, we must first determine the theoretical yield. We can calculate percent yield as 100 times the difference between actual yield and theoretical yield using both theoretical and percent yield (32.8g H2O).
Theoretical yiled:
5.58g H₂ₓ (1 mol/2.016g) = 2.768 moes H₂
As 2 moles of H₂ produce 2 moles of H₂O, if all hydrogen react will produce 2.768 moles H₂O.
In grams: 2.768 moles H₂O×(18.015g/mol) = 49.86g H₂O
Hence, theoretical yield = 49.86g H₂O
Percent yield:
Percent yield = Actual yield/Theretical yieldₓ100
= 32.8g H₂O/49.86g × 100
= 65.7%
Therefore, Percent yield is 65.7%.
To learn more about percent yield
Here: https://brainly.com/question/11963853
#SPJ4
Which gas law can be used to calculate the pressure of hydrogen gas collected over water.
High pressure from hydrogen gas gathered over water can be calculated using Dalton's Principle of Partial Pressures.
Describe hydrogen.The chemical element hydrogen is represented by the letter H and atomic radius 1. The lightest element is hydrogen. Under normal circumstances, hydrogen is a gas made up of diatomic molecules with the formula H 2. It is non-toxic, tasteless, colorless, odorless, and extremely flammable.
Why is hydrogen essential?Hydrogen may be utilized to heat both homes and places of business in addition to powering vehicles and producing electricity. To reach net zero, it will be crucial to reduce our carbon emissions significantly. The handling and usage of hydrogen is safer than that of the current fuels due to a number of its characteristics. For instance, hydrogen is not poisonous.
To know more about hydrogen visit:
https://brainly.com/question/28937951
#SPJ4
a sample of h2 gas (2.0 l) at 3.5 atm was combined with 1.5 l of n2 gas at 2.6 atm pressure at a constant temperature of 25°c into a 7.0 l flask. the total pressure in the flask is _____ atm.
The total pressure in the flask is 1.6 atm.
given that :
pressure H₂ = 3.5 atm
volume H₂ = 2 L
pressure N₂ = 2.6 atm
volume N₂ = 1.5 L
Total volume = 7 L
total pressure = ?
the formula i give as :
PH₂ V H₂ + PN₂ VN₂ = P total V total
Pressure total = (PH₂ V H₂ + PN₂ VN₂) V total
= ( 3.5 × 2 + 2.6 × 1.5 ) / 7
= 1.6 atm
Thus, a sample of H₂ gas (2.0 l) at 3.5 atm was combined with 1.5 l of N₂ gas at 2.6 atm pressure at a constant temperature of 25°c into a 7.0 l flask. the total pressure in the flask is 1.6 atm.
To learn more about pressure here
https://brainly.com/question/4155919
#SPJ4
A student prepares a standardized solution of sodium hydroxide by the following procedure. The student first prepares a saturated solution of sodium hydroxide using freshly distilled or deionized water. She measures about 5 mL with a graduated cylinder and dilutes to 1 L in a plastic bottle with freshly distilled or deionized water to make a solution that is about 0.1 M. To determine the exact concentration she puts the NaOH solution in a buret and titrates a carefully-weighed pre-dried solid acid of known molar mass. She records the volume of NaOH needed to neutralize it and repeats the process several times to determine the concentration of the NaOH solution. She calculates the concentration and uncertainty in the concentration of the NaOH from the titration data. Why can\'t the student just weigh the sodium hydroxide directly to make a standard? Select all that apply. NaOH pellets react with water. NaOH pellets react with oxygen. NaOH pellets react with hydrogen. NaOH pellets react with carbon dioxide. NaOH pellets react with nitrogen. Why did the student first prepare a saturated solution? A. Saturated solutions are higher in purity than unsaturated solutions. B. Unsaturated NaOH solutions are light-sensitive. C. She can calculate the concentration of the saturated NaOH solution from the Ksp of NaOH. D. Any sodium hydrogen carbonate formed by the reaction of NaOH with atmospheric carbon dioxide will precipitate in the saturated solution. The student prepares the NaOH solution of high purity but unknown concentration by taking about 5 mL of the supernatant at the top of the saturated solution adding it to a plastic bottle with about 1 L of freshly distilled or deionized water. The bottom of the solution contains some white solids which are likely to be (select all correct answers): sodium hydroxide sodium hydrogen sulfate sodium silicate CO2(s) H2O(s) phthalic acid sodium hydrogen carbonate Why is a plastic bottle is generally preferred to glass bottle during the above step? A. The reaction between sodium hydroxide and plastic produces plastic hydroxide. B. Sodium hydroxide renders plastic inert by a process called passivation. C. Sodium hydroxide reacts slowly with glass, forming sodium silicate. D. Sodium hydroxide reacts with polyethylene. The concentration of saturated NaOH is 50.0% w/w and the density is 1.52 g/mL. If exactly 4.00 mL were diluted to 1.000 L, what would be the concentration? Why is potassium acid phthalate (KHC8H4O4, MM = 204.227 g/mol) so widely used as a standard in acid-base titrations? Select all that apply. It is stable to air It is expensive It is easy to dry It has a slowly changing pH at the equivalence point It has a relatively high molar mass It is available in high purity A student dries the pure potassium acid phthalate (KHC8H4O4) in the oven overnight to A. remove water B. purify the matrix C. remove carbon dioxide adn sulfer dioxide D. anneal the crystal structure She weighs 0.1553 g of dry potassium acid phthalate into a flask and adds some water from a graduated cylinder to dissolve it. Why doesn\'t she measure the volume of water with a more accurate device? A. The accuracy of the graduated cylinder is sufficient to measure to two decimal places which is all the precision needed for a titration. B. It would be better to measure the mass because it can be read to four decimal places with an analytical balance. C. The quantity of water actually is important and should be measured accurately because it affects the starting concentration thus the starting pH of the solution. D. The volume of water added is not important because the titration equivalence point depends only on the number of millimoles of potassium acid phthalate and not its concentration. The titration of 0.1553 g of dry potassium acid phthalate (MM = 204.227 g/mol) requires 49.84 mL of NaOH solution. What is the concentration of the NaOH solution? Why is freshly distilled or deionized water used in this standardization? A. Freashly distilled water contains no hydrogen peroxide B. Distilles water contains calcium, which stabilizes the sodium hydroxide C. Freashly deionized water has a pH of 4.72 D. There is little CO2 in freshly deionized or distilled water
NaOH has the characteristic of being deliquescent; hence, it cannot be weighed directly; rather, a saturated solution is diluted to get the appropriate concentration.
The process of deliquescent is explained using sodium hydroxide.
When a material absorbs moisture and carbon dioxide from the air to the point that it becomes dissolved and forms a solution, this process is known as deliquescence.
Who or what uses hydroxide?To make soap, rayon, paper, explosive materials, colors, and petroleum products, manufacturers can employ sodium hydroxide. Processing cotton fabric, cleaning and processing metal, applying an oxide layer, electroplating, and electrolytic extraction are further uses for sodium hydroxide.
To know more about Hydroxide visit:
https://brainly.com/question/21904397
#SPJ4
consider neutralization of milk of magnesia (solid magnesium hydroxide) with hydrochloric acid. what volume of 5.00 m hydrochloric acid(aq) is required for complete reaction with 5.83 g solid magnesium hydroxide (molar mass
Magnesium hydroxide, or Mg(OH)2, is a milky white suspension that is used as an antacid and laxative. Mg(OH)2 is only weakly soluble in water. When 6N HCl is added, some of the OH- ions in the solution are removed, shifting the equilibrium to the right and allowing more Mg(OH)2 to dissolve.
This is a double displacement reaction, which is another name for a neutralization reaction. It is neutralization because a base, magnesium hydroxide, has been added to an acid, HCl. The end results are salt (MgCl2) and water.
Learn more about the reaction,
https://brainly.com/question/11231920
#SPJ4,
4. The melting of candle wax is classified as a physical change because it:
a. produces no new substances
b. transfers energy
c. absorbs heat
d. changes the chemical properties of wax
Write a balanced equation for the double-replacement neutralization reaction described, using the smallest possible integer coefficients.
A reaction occurs when aqueous solutions of barium hydroxide and sulfuric acid are combined.
The balanced equation for the double-replacement neutralization reaction between aqueous solutions of barium hydroxide and sulfuric acid is as follows: Ba(OH)₂ + H₂SO₄ → BaSO₄ + 2H₂O
What is a double-displacement reaction?A double displacement reaction is a type of reaction in which two reactants exchange ions to form two new compounds.
The general formula for a double-displacement reaction is written as: AB + CD = AD + BC.
According to this question, aqueous solutions of barium hydroxide and sulfuric acid reacts together in a double displacement reaction as follows:
Ba(OH)₂ + H₂SO₄ → BaSO₄ + 2H₂O
Sulphate ions and hydroxide ions are displaced in the reactants to form two new compounds namely: barium sulfate and water.
Learn more about double displacement reaction at: https://brainly.com/question/29307794
#SPJ1
a balloon is filled to a volume of 2.00 l with 3.50 moles of gas at 25 °c. with pressure and temperature held constant, what will be the volume of the balloon if 0.70 moles of gas are added?
2.4 L is volume of the balloon if 0.70 moles of gas are added
What is volume of a gas?
The area occupied by gaseous particles under normal temperature and pressure circumstances is referred to as the volume of the gas.
The symbol for it is "V."
Litres, abbreviated "L," are the SI unit of volume.
A mole of gas at normal temperature has a volume of 24 m3, or 24000 cm3.
The term "molar volume of a gas" refers to this quantity.
assuming ideal gas:
PV = RTn
∴ R = 0.082 atm.L/K.mol
∴ V1 = 2 L
∴ n1 = 3.50 mol
∴ T1 = 25°C ≅ 298 K
⇒ P1 = (RT1n1)/(V1) = ((0.082 atm.L/K.mol)(298 K)(3.50 mol))/(2 L)
⇒ P1 = 42.763 atm
with pressure and temperature held constant:
∴ T2 = T1 = 298 K
∴ P2 = P1 = 42.763 atm
∴ n2 = 0.70 mol + 3.50 mol = 4.20 mol
⇒ V2 = (RT2n2)/P2
⇒ V2 = ((0.082 atm.L/K.mol)(298 K)(4.20 mol))/(42.763 atm)
⇒ V2 = 2.4 L
Hence, 2.4 L is volume of the balloon if 0.70 moles of gas are added
To know more about volume of gas from the given link
https://brainly.com/question/27100414
#SPJ4
which of the following is a polyatomic ion? select one: a. iron (ii) ion b. hydroxide ion c. chloride ion d. magnesium ion
The polyatomic ion out of the given options is hydroxide ion that consists of two atoms.
Polyatomic ions are the one that are composed of two or more than two atoms/elements.
The formula for Iron (II) ion is Fe2+.
The formula for Chloride ion is Cl-.
The formula for magnesium ion is Mg2+.
The formula for hydroxide ion is OH-.
In hydroxide ion, there are two atoms i.e., one hydrogen and one oxygen atom. Therefore, it is considered as a polyatomic ion.
Thus, option b is the correct choice.
To learn more about ion check the link below:
https://brainly.com/question/13692734
#SPJ4
at a certain concentration of h2 and i2, the initial rate of reaction is 98.0 m / s. what would the initial rate of the reaction be if the concentration of h2 were doubled? be sure your answer has the correct number of significant digits.
Learn the concentration and beginning rate in order to determine the correct number of significant digits. The starting rate of reaction is 98.0 m/s at a specific concentration of h2 and i2.
What, using an example, is concentration?
1) Percent Concentration:
The amount of solute that completely dissolves in 100 g of solvent. We know that there are 20 g of solute in 100 g of solution if the solution's concentration is 20 percent. Example: The solution is made by combining 10 g of salt with 70 g of water. Find the solution's concentration using mass percent.
What would you say about concentration?
The amount of solute contained in a specific amount of solution is the substance's concentration. Typically, concentrations are described in terms of molarity, which is the number of
Learn more about concentration here:
brainly.com/question/10725862
#SPJ4
If 87 J of heat are added to a balloon, causing it to expand from 1.0 L to 1.4 L under 0.97 atm of pressure, what is the change in energy of the balloon (in joules)?
The change in energy of the balloon is 4.8 X10¹ J.
What is pressure?The pascal (Pa), which is equal to one newton per square meter (N/m2) of surface area, is the SI unit for pressure. Force per unit of surface area is how pressure is defined. In addition to being proportional to the force it exerts, an object's pressure is also inversely correlated with the area on which the force is applied.
Given, Heat is added to the balloon so q will be positive.
q = +87 J
Initial volume (Vi) = 1.0L
Final volume (Vf) = 1.4L
Change in volume (ΔV) = Vf - Vi
Change in volume (ΔV) = 1-4L-1.0L
Change in volume (ΔV) = 0.4L
Pressure (P)
given,
W = - PΔV
W = 0.97 atm × 0.4L
W = - 0.388 Latm
W = - 0.388 Latm × 101.325 J/1 Latm
W = 39.3141 J
Change in energy (ΔE) = q +W
Change in energy (ΔE) = +875 + (-39-3141J)
Change in energy (ΔE) = 47.6859 J
Change in energy (ΔE) = 4.76859 X10¹ J
Change in energy (ΔE) = 4.8 X10¹ J.
To know more about pressure visit:
https://brainly.com/question/13919194
#SPJ1
convert the following potentials. the ag | agcl and calomel reference electrodes are saturated with kcl. (a) 0.523 v versus s.h.e. ? versus ag | agcl (b) 0.111 v versus ag | agcl ? versus s.h.e. (c) 0.222 v versus s.c.e. ? versus s.h.e. (d) 0.023 v versus ag | agcl ? versus s.c.e. (e) 0.023 v versus s.c.e. ? versus ag | agcl
the ag | agcl and calomel reference electrodes are saturated with kcl.
a) +0.326 V vs Ag/AgCl for 0.523 V vs Ag/AgCl
+0.523- 0.197= 0.326
e) 0.021 V vs Ag/AgCl
+0.218-0.197= 0.0021
Calomel reference electrode is a salt electrode that is readily soluble in metals. It serves as a supplemental reference electrode to ascertain the electrode's standard potentials. Construction: The electrode is made of a glass tube with a bent side tube and another side tube, designated B.
Using a platinum wire contained in a glass tube and submerged in a layer of mercury, an external electrical contact is created. A salt bridge and the side tube come into touch electrically. The calomel electrode can act as either an anode or a cathode depending on the makeup of the other electrodes in the cell.
Learn more about Calomel reference electrode here:
https://brainly.com/question/17885489
#SPJ4
_______________ is a food preservation process that exposes food to radiation energy, preventing microbial growth.A. Food ionizationB. PasteurizationC. Food irradiationD. Sterilization
C. Food Irradiation
Explanation:
solute s has a distribution constant of 4.44.4 between water (phase 1) and hexane (phase 2). calculate the concentration of solute s in hexane
The concentration of solute s in hexane is 11.62.
Given
Partifion coefficient [tex]$=4 \cdot 4$[/tex]
[tex]$$\begin{aligned}\text { Partition coebbicient } & =\frac{[\text { Shexane }]}{[\text { Swak] }]} \\4 . 4 & =\frac{[\text { Sherate }]}{0.024} \\{[\text { Snewane }] } & =4.4 \times 0.024 \mathrm{~m} \\& =0.1056 \mathrm{~m} \\& =0.10 \mathrm{~m}\end{aligned}$$[/tex]
[tex]\begin{aligned}& \text { Partition coetficient }=\frac{\frac{\text { moles }}{\text { volune }} \text { of } \sin \text { Lexane }}{\frac{\text { moles }}{\text { vilum }} \text { ob } s \text { in }} \\& 4.4=\frac{\frac{\text { mol sherake }}{24.0 \mathrm{~mL}}}{\frac{\text { molwater. }}{65.0 \mathrm{~mL}}} \\& \frac{\text { mol S hexare }}{\text { mol } S_{\text {watex }}}=\frac{4.4 \times 84.0 \mathrm{~mL}}{65.0 \mathrm{~mL}} \\& =1.624 \\& =11.62 \\&\end{aligned}[/tex]
To learn more about concentration of solute visit: https://brainly.com/question/10720472
#SPJ4
jacob carelessly added only 40.0ml (instead of the recommended 50.0ml) of 1.1 m hcl to the 50.0ml of1.0 m naoh. explain the consequence of the error.
The combined masses of the acid and base, the enthalpy change would be less than anticipated.
What is pH?
An aqueous solution's pH indicates how basic or acidic it is; a pH of 7 or less indicates that the solution is basic. 7 is regarded as the neutral pH. The pH scale typically ranges from 0 to 14, though extremely strong acids and bases may have pH values that are higher than 14.
As 50 ml of HCl are needed to make 50 ml of NaOH, but Jacob only added 40 ml, all the H+ ions are consumed, and this limiting reactant is what prevents the production of the desired product.
[tex]NaOH + HCl - > NaCl + H2O[/tex]
Instead of NaOH, HCl would act as the limiting reactant. This error would result in fewer product. Due to the volume shift, this would also have an impact on the pH levels of the solution. Additionally, by reducing the combined masses of the acid and base, the enthalpy change would be less than anticipated.
To learn more about pH from the given link.
https://brainly.com/question/172153
#SPJ4
how much mno2(s)mno2(s) should be added to excess hcl(aq)hcl(aq) to obtain 205 ml cl2(g)205 ml cl2(g) at 25 °c and 785 torr785 torr ?
The mass of manganese required is 0.918 g.
What is chemical equation?
Chemical equations are symbols but also chemical formulas that represent a chemical reaction symbolically. With a plus sign separating the entities in the reactants and the products and an arrow pointing in the direction of the products to indicate the direction of the reaction, the reactant entities have been given on the left as well as the product entities on the right. Chemical formulas can be mixed, structural (represented by pictures), or both. The absolute values of a stoichiometric numbers are shown as coefficients alongside the symbols and formulas of the various entities. Jean Beguin drew the first chemical equation in 1615.
Start with a balanced equation.
MnO₂(s) + 4HCl(aq) --> 2H₂O(l) + Cl₂(g) + MnCl₂(aq)
Calculate the moles of Cl₂ in 385 mL under the conditions given, using the ideal gas law.
PV = nRT
Known and Unknown
P = 785 Torr
V = 250 mL × 1 L/1000 mL = 0.250 L
n = ? mol
R = 62.364 L•Torr/K•mol
T = 25 °C + 273 = 298 K
Solve for n.
n = PV/RT
n = (785 Torr × 0.250 L)/(62.364 L•Torr/K•mol × 298 K) = 0.01056 mol Cl₂
Calculate the moles of MnO₂ required to produce 0.01056 mol Cl₂ in excess HCl, using the mole ratio between MnO₂ and Cl₂.
Since the mole ratio between MnO₂ and Cl₂ is 1:1, 0.01056 mol Cl₂ is produced by 0.01056 mol MnO₂.
Calculate the mass of MnO₂ in 0.01056 mol.
mass (m) = moles (n)/molar mass (M)
M(MnO₂) = 54.938 g/mol Mn + (2 × 15.999 g/mol O) = 86.936 g/mol MnO₂
m(MnO₂) = 0.01056 mol × 86.936 g/mol = 0.918 g Cl₂
The mass of manganese required to react with excess HCl to produce 0.01056 mol Cl₂ is 0.918 g.
learn more about chemical equation
https://brainly.com/question/722324
#SPJ4
b) why is the methyl group in toluene an ortho/para director? explain, using the reaction mechanism and drawings to support your answer. add an electrophile (you can use e ) to the ortho, meta, or para position,and compare the stabilities of the competing carbocation intermediates (the three possible sigma complexes).
The methyl group is toluene is not on meta position. The methyl group is electron releasing group.
In case of toluene, the methyl group connected to the ring, will increase the electron density at ortho and para positions via way of means of resonance with out converting some thing on the meta position. Thus the attacking reagent at once assaults on the electron wealthy site , accordingly the methyl institution is ortho directing. you may effortlessly apprehend the motion of electrons via way of means of following the route of arrows in structures. There isn't any shape wherein the electrons may be visible on meta position.
The resonating structures of toluene is attached below.
To learn more about resonance check the link below:
https://brainly.com/question/419650
#SPJ4
you are given a liquid sample that contains methanol (ch3oh), ethanol (ch3ch2oh), or a mixture of both. you combust a 0.336 g sample and obtain 0.462 g of co2 and 0.378 g of h2o. what did you learn about your sample?
It is methanol when combust to obtain 0.462 g of co2 and 0.378 g of h2o.
Methanol (CH3OH), commonly known as methyl alcohol, wood alcohol, or wood spirit, is the simplest of a vast series of chemical compounds known as alcohols. It is made up of a methyl group (CH3) joined to a hydroxy group (OH). In the past, methanol was produced by destructively distilling wood. The direct fusing of hydrogen and carbon monoxide gas in the presence of a catalyst is the key to modern methanol manufacturing. Methanol is being made more and more often using syngas, a mixture of carbon monoxide and hydrogen created from biomass.
Pure methanol is a necessary ingredient in chemical synthesis. Myriad key synthetic dyestuffs, resins, pharmaceuticals, and scents are among the numerous compounds produced using its derivatives.
To know more about methanol visit : https://brainly.com/question/16866907
#SPJ4
If exactly one molecule of solute is present in 1. 00 l of solution, what is the concentration of the solution?.
Answer:
1.66x10^-24 M
Explanation:
By definition, 1 mole = 6.02x10^23 particles, or molecules, in this case. Use this relationship as a conversion factor:
((1 mole)/(6.02x10^23 molecules))
Use this conversion factor to calculate moles of the solute when only 1 molecule is present:
(1 molecule)/((1 mole)/(6.02x10^23 molecules)) = 1.66x10^-24 moles
The molecules cancel, leaving only moles.
Concentration, by definition, is the moles per liter of a solute. Take the
1.66x10^-24 moles and divide by the volume, which is 1.0L here:
(1.66x10^-24 moles solute)/(1.0 Liter) = 1.66x10^-24 molar, or 1.66x10^-24 M
Write covalent bonding in nitrogen and nitrogen
Answer:
Explanation:
When two atoms share one electron pair, they are said to be joined by a single covalent bond.
In a nitrogen molecule, each nitrogen atom has five valence electrons.
Two nitrogen atoms are connected via a triple covalent bond.
what is the significance of carbon in forming the basis of the four classes of biologically important organic molecules
The ability of carbon to establish stable bonds with numerous elements, including itself, is the cause. Due to this characteristic, carbon can take the form of a vast range of very massive and complicated compounds.
What uses does carbon serve?Coal, toxic gases, and crude oil are all utilized as fuels gasoline. It is used to create a variety of products, including plastic and steel alloys combination carbon or iron. Even black ink in printers and painting is produced with it.
Why is carbon essential to life and what does it do?Without carbon, life on the planet would not be conceivable. This is partly caused by the ease with which carbon can establish bonds to other atoms, providing flexibility.
To know more about carbon visit:
https://brainly.com/question/22530423
#SPJ4