if i measure the speed of a shaft to be 1000 rpm /- 100 rpm, what is the shaft's speed and uncertainty in speed measured in radians/sec?\

A) The magnitude force required to give a helicopter of mass M an acceleration of 0.10 g upward is F = 0.981 M N.

B) The work done by the force as the helicopter moves a distance h upward is W = 0.981 Mh N.

A) The force required to give a helicopter of mass M an acceleration of 0.10 g upward can be calculated using Newton's Second Law of Motion, which states that the force applied to an object is equal to the object's mass multiplied by its acceleration. The acceleration given is 0.10g, which can be converted to meters per second squared (m/s²) as follows:

0.10 g = 0.10 × 9.81 m/s² = 0.981 m/s²

Thus, the force required can be calculated as:

F = M × a

F = M × 0.981 N

B) To calculate the work done by the force as the helicopter moves a distance h upward, we can use the formula for work done by a constant force, which is:

W = F × d × cos(θ)

where W is the work done, F is the force applied, d is the displacement, and θ is the angle between the force and the displacement vectors. In this case, the displacement is upward and the force is also upward, so θ = 0 and cos(θ) = 1.

The work done by the force as the helicopter moves a distance h upward is:

W = F × h × cos(θ)

W = F × h

Substituting the value of F from Part A, we get:

W = 0.981 M N × h

To learn more about force the link:

https://brainly.com/question/26115859

#SPJ4

The complete question is:

A) What magnitude force is required to give a helicopter of mass M an acceleration of 0.10 g upward? Express your answer in terms of the variable M and appropriate constants.

B) What work is done by this force as the helicopter moves a distance h upward? Express your answer in terms of the variables M,h, and appropriate constants.

In conclusion, the experiment aimed to determine the acceleration due to gravity by measuring the period of a simple pendulum. The experiment was performed by measuring the length of the pendulum and recording the time for 10 oscillations. The data was then used to calculate the average period and subsequently, the acceleration due to gravity using the formula: g = (4π²L)/T².

Based on the results obtained, the acceleration due to gravity was found to be (9.79 ± 0.06) m/s², which is in good agreement with the accepted value of 9.81 m/s². The small discrepancy could be due to the experimental errors such as air resistance, friction and measurement errors.

Overall, the experiment was successful in determining the acceleration due to gravity using a simple pendulum and demonstrated the relationship between the period and the length of the pendulum.

The range of capacitance needed for the capacitor to be 99.3% charged within 10 ms of turning the voltage source on is greater than or equal to 56.3 times the resistance in ohms.

To calculate the range of capacitance needed for the capacitor to be 99.3% charged within 10 ms of turning the voltage source on in an RC circuit, we can use the following formula:

Vc(t) = Vmax * (1 - e^(-t/RC))

where Vc(t) is the voltage across the capacitor at time t, Vmax is the maximum voltage of the source, e is the mathematical constant approximately equal to 2.718, R is the resistance in ohms, C is the capacitance in farads, and t is the time in seconds.

When the capacitor is 99.3% charged, the voltage across it is 0.993 * Vmax. Substituting this value into the formula and solving for C, we get:

C >= t / (R * ln(1 / (1 - 0.993)))

C >= 10 ms / (R * ln(1 / 0.007))

C >= 56.3 * R

Therefore, the range of capacitance needed for the capacitor to be 99.3% charged within 10 ms of turning the voltage source on is greater than or equal to 56.3 times the resistance in ohms.

Know more about  RC circuit   here:

https://brainly.com/question/2741777

#SPJ11

The force needed to lift the car is 8800 N, which is its weight.

In hydraulic systems, forces are transferred from one area to another inside an incompressible fluid, such as water or oil. Most aircraft's landing gear and braking systems are hydraulic. In order to function, pneumatic systems need a compressible fluid like air.

The smaller piston received a 55 N force from the mechanic, and its surface area was 0.015 m². We may determine the pressure used by the mechanic using the pressure formula P = F/A:

P = F/A = 55 N / 0.015 m² = 3666.67 Pa

This pressure is transmitted to the larger piston with an area of 2.4 m². The force on the larger piston can be calculated using the formula F = PA:

F = PA = 3666.67 Pa x 2.4 m² = 8800 N

To know more about force visit:-

https://brainly.com/question/13191643

#SPJ1

The coils in the spring will move farther apart when a current is passed through it because of the solenoid effect.

The solenoid effect describes the way a loose spiral spring expands when a current is fed through it. An electric current flows through a coil of wire to create a solenoid, a type of electromagnet. A magnetic field is produced when current passes through the coil, and the magnetic field lines are parallel to the axis of the coil. The amount of current flowing through the coil and the number of wire turns within the coil determines how strong the magnetic field is.

Because a loose spiral spring behaves like a coil of wire, the solenoid effect is seen in this situation. The magnetic field that is created around a spring when a current is sent through it has lines that are parallel to the spring's axis. The interaction between the magnetic field and the spring's current produces a force that pushes the coils apart.

To learn more about solenoids, refer to:

https://brainly.com/question/4340558

#SPJ4

The correct option is option a) "When the electric field due to one is a maximum, the electric field due to the other is also a maximum, and this relation is maintained as time passes.".

When we say that two light rays striking a screen are in phase with each other, we mean that their electric fields are synchronized, and the electric field due to one is a maximum when the electric field due to the other is also a maximum, and this relation is maintained as time passes.

This synchronization occurs because they have the same wavelength and are traveling at the same speed.

As a result, they alternately reinforce and cancel each other, creating a pattern of light and dark bands on the screen. Therefore, the correct answer is a) when the electric field due to one is a maximum, the electric field due to the other is also a maximum, and this relation is maintained as time passes.

Learn more about electric field:

https://brainly.com/question/19878202

#SPJ11

The melting of methane hydrates on the seafloor can lead to a sharp rise in global temperatures because methane is a powerful greenhouse gas. The statement is true.

Methane is a powerful greenhouse gas, with a global warming potential that is estimated to be about 25 times greater than that of carbon dioxide over a 100-year time horizon. Methane hydrates are solid, crystalline compounds that contain a large amount of methane gas trapped within water molecules. These hydrates are stable under certain temperature and pressure conditions, but if they become destabilized, they can release large amounts of methane into the atmosphere.

The melting of methane hydrates on the seafloor is a concern because it has the potential to release vast amounts of methane into the atmosphere, which could significantly contribute to global warming and climate change. This process could be triggered by rising ocean temperatures, changes in ocean currents, or other factors that alter the stability of the hydrates. While the exact extent and impact of this phenomenon are still uncertain, it is an area of active research and concern among climate scientists.

To learn more about temperature, refer:-

https://brainly.com/question/2662380

#SPJ11

The space station's, which has a ringed compartment is rotating with initial velocity 0.10rad/s and angular acceleration of 0.01rad/s², angular velocity after 960 seconds is 9.7 rad/s.

To find the space station's angular velocity after 960 seconds, we can use the following equation that relates initial angular velocity, angular acceleration, and time:

Final angular velocity (ωf) = Initial angular velocity (ωi) + (angular acceleration × time)

Given:
Initial angular velocity (ωi) = 0.10 rad/s
Angular acceleration = 0.01 rad/s²
Time = 960 seconds

Now, we can plug these values into the equation:

ωf = 0.10 rad/s + (0.01 rad/s² × 960 s)

ωf = 0.10 rad/s + (9.6 rad/s)

ωf = 9.7 rad/s

So, the space station's angular velocity after 960 seconds is 9.7 rad/s.

More on angular velocity: https://brainly.com/question/13934235

#SPJ11

The resistance of each bulb which are connected in series is 20.571 Ω.

Let's find the resistance of each bulb using the given terms:

1. Voltage of source (V_source) = 120 V
2. Number of bulbs (n) = 10
3. Power of each bulb (P) = 7.0 W

We'll use the formula P = V²/R to find the resistance of each bulb.

1: Find the total power of the series.
Total power (P_total) = n * P = 10 * 7.0 W = 70 W

2: Find the total resistance of the series.
Using the formula P_total = V_source^2 / R_total, we can find R_total:
R_total = V_source² / P_total = (120 V)² / 70 W = 14400 / 70 = 205.71 Ω

3: Find the resistance of each bulb.

Since the bulbs are connected in series, the total resistance is the sum of the individual resistances. Therefore, we can find the resistance of each bulb (R_bulb) as follows:

R_bulb = R_total / n = 205.71 Ω / 10 = 20.571 Ω

So, the resistance of each bulb is approximately 20.571 Ω.

Learn more about resistance:

https://brainly.com/question/24858512

#SPJ11

The magnetic field inside the coil is 0.036 T.

As the area of the coil increases, the magnetic field strength increases, and as the length of the wire increases, the magnetic field strength decreases. Understanding the factors that affect the magnetic field inside a coil is important in designing and optimizing various devices that use electromagnetic fields, such as transformers, motors, and generators. The magnetic field inside a coil can be calculated using the formula:

B = (μ₀ * n * I * A) / L

where,

μ₀ = permeability of free space = 4π x 10^-7 T m/A

n = number of turns

I = current in amperes

A = area of the coil in square meters

L = length of the coil in meters

Substituting the given values,

B = (4π x 10^-7 T m/A * 636 turns * 0.487 A * (2.12 x 10^-2 m)^2) / (2.12 x 10^-2 m)

B = 0.036 T (Tesla)

To know more about magnetic field, here

brainly.com/question/14848188

#SPJ4

Evaporation is a cooling process because more energetic molecules escape the liquid, carrying away heat through radiation. Answer: "None of the above".

The release of more energising molecules from the liquid during evaporation causes cooling. The heat energy that these molecules bring with them when they go lowers the liquid's temperature. Not conduction or convection, but heat radiation throughout the operation is mostly to blame for this cooling impact.

Therefore, "none of the above" is the appropriate response. In general, the energy needed to break the intermolecular bonds in the liquid, which lowers the temperature overall, is responsible for the cooling impact of evaporation.

Learn more about Evaporation:

https://brainly.com/question/25310095

#SPJ4

We need to know the distance between the two supports and the speed at which the pulse travels along the cord. Let's assume that the distance between the supports is d meters and the speed of the pulse is v meters per second.

We can use the formula:

time = distance / speed

to find the time it takes for the pulse to travel from one support to the other. Rearranging this formula, we get:

distance = speed x time

So, if the tension in the cord is 110 N, we still need to know the speed of the pulse to calculate the time it takes to travel the distance.

Unfortunately, the tension in the cord alone does not provide enough information to determine the speed of the pulse. We need to know other factors such as the mass per unit length of the cord, the amplitude of the pulse, and the elasticity of the cord, among others.

Therefore, we cannot provide a specific answer to this question without additional information.

To know more about distance:

https://brainly.com/question/15172156

#SPJ11

Answer:

falling iirc

Explanation:

When you comb your hair on a dry day, the friction between your hair and the comb can lead to the transfer of electrons from one material to another.

Electrons are negatively charged particles that are present in all materials.

The material that loses electrons becomes positively charged, as it has lost negatively charged particles.

In this case, the comb is likely to become positively charged as it loses electrons to your hair during the combing process.

The material that gains electrons becomes negatively charged, as it has gained negatively charged particles.

In this case, your hair is likely to gain electrons from the comb during the combing process, making it negatively charged.

However, whether or not your hair remains neutral depends on the balance of electrons that are transferred during the process.

If the transfer of electrons is balanced, such that the comb loses an equal number of electrons to the hair and the hair gains an equal number of electrons from the comb, then the hair will remain neutral.

If the transfer of electrons is unbalanced, and the hair gains more electrons than the comb loses, then the hair will become negatively charged.

In practice, it is difficult to achieve a perfectly balanced transfer of electrons, so it is possible that your hair may become slightly negatively charged when you comb it on a dry day.

However, the charge imbalance is likely to be very small and may not be noticeable.

Overall, the process of combing your hair on a dry day can lead to the transfer of electrons between the comb and your hair, resulting in the comb becoming positively charged and your hair becoming slightly negatively charged.

However, whether or not your hair remains neutral depends on the balance of electrons that are transferred during the process.

To know more about friction visit link :

https://brainly.com/question/28356847

#SPJ11

The equivalent gradient updates as momentum 0.9 with batch size B = 32 in the simplified SGD update equation.

The relationship between momentum and batch size in the simplified version of SGD update is that increasing the batch size leads to a decrease in the effective learning rate, which in turn requires an increase in momentum to maintain the same level of stability.

If we train a model with momentum and a batch size of B, and now have a GPU with more memory and can use a batch size of B', we should increase the momentum by a factor of sqrt(B/B') to maintain the same level of stability.

To find the equivalent momentum for the simplified SGD update equation, we can use the formula:

momentum' = momentum * sqrt(B/B')

For example, if we initially trained with momentum = 0.9 and batch size B = 32, and now have a GPU with enough memory to use batch size B' = 64, we would calculate:

momentum' = 0.9 * sqrt(32/64) = 0.9 * 0.7071 = 0.64 (rounded to two decimal digits)

Therefore, using a momentum of 0.64 with batch size B' = 64 would lead to equivalent gradient updates as momentum 0.9 with batch size B = 32 in the simplified SGD update equation.

Learn more about SGD

brainly.com/question/30244812

#SPJ11

A spaceship is traveling at 0.7c when a laser beam is turned on, directed in the direction the ship is traveling.

According to the theory of relativity, the speed of light in a vacuum is always the same for all observers, regardless of their relative velocities.

The speed of the laser light is always c, which is the speed of light in a vacuum, approximately 3.0 x 10^8 meters per second. This is because the speed of light is constant and does not depend on the speed of the source (in this case, the spaceship).

Explanation:

In this scenario, the spaceship is traveling at 0.7c, which means that it is moving at a speed that is 0.7 times the speed of light. When a laser beam is turned on in the direction of the spaceship's motion, the speed of the laser light is still c, as measured by an observer on the spaceship. This is because the speed of light is always the same, regardless of the motion of the source or observer.

To learn more about Theory of relativity. Please Visit:

https://brainly.com/question/14212639

#SPJ11

A laser beam is activated and pointed in the direction of a spaceship that is moving at 0.7c.

The speed of light in a vacuum is constant for all observers, regardless of their relative velocities, according to the theory of relativity.

The speed of the laser light is always c, or around 3.0 x 108 metres per second, the speed of light in a vacuum. This is due to the fact that the speed of light is independent of the source's (in this example, the spacecraft's) speed and is always constant.

In this scenario, the spaceship is traveling at 0.7c, which means that it is moving at a speed that is 0.7 times the speed of light. When a laser beam is turned on in the direction of the spaceship's motion, the speed of the laser light is still c, as measured by an observer on the spaceship. This is because the speed of light is always the same, regardless of the motion of the source or observer.

learn more about theory of relativity here:

https://brainly.com/question/14212639

#SPJ4

The result is ,(a)  Z = sqrt((10^2) + (15^2)) = 18.03 ohms.
                    (b) the apparent power would be S = (120 V) x (1 A) = 120 VA.

To find the apparent power (total volt-amps) of a series circuit with a 10 ohm resistor and 15 ohms of inductive reactance in a single inductor, we first need to calculate the impedance of the circuit.

Impedance is the total opposition to current flow in an AC circuit and is a combination of resistance and reactance. In this case, we can use the formula Z = sqrt(R^2 + XL^2), where R is the resistance and XL is the inductive reactance.

To find the apparent power (S) of the circuit, we use the formula S = Vrms x Irms, where Vrms is the root mean square voltage and Irms is the root mean square current. Since we are not given any values for voltage or current, we cannot find the exact value of apparent power.

However, we can make some assumptions based on typical values for household circuits. For example, if the voltage is 120 volts (typical in the US) and the current is 1 amp,

To learn more about : power

https://brainly.com/question/1634438

#SPJ11

You can safely hold your fingers on both sides of a candle flame due mainly to convection.

Convection is the process by which heat is transferred through the movement of fluids or gases, such as air. In this case, the heated air around the candle flame rises upwards, which means the heat is not directly transferred to your fingers when they are on both sides of the flame. Therefore we can correctly say that you can safely hold your fingers on both sides of a candle flame mainly due to convection.

More on convection: https://brainly.com/question/19446911

#SPJ11

Answer:

P (momentum) = M * V

V = (2.95^2 + 3.97^2)^1/2 = 4.95 m/s

P = 2.99 kg * 4.95 m/s = 14.8 kg-m/sec      total momentum

tan θ = Vy / Vx = -3.97 / 2.95 = -1.35

θ = 53.4 deg below positive x-axis

The maximum voltage induced in the loop is 82.05 volts. The EMF is negative.

The maximum voltage induced in the loop can be calculated using the formula:

EMF = -NΔΦ/Δt

Where EMF is the induced electromotive force, N is the number of turns in the loop, ΔΦ is the change in magnetic flux, and Δt is the time interval over which the change occurs.

In this case, the loop has an area of 0.08 m2 and is rotating at a constant angular speed of 87 rev/s, which corresponds to an angular velocity of 544.89 rad/s. The magnetic field is perpendicular to the axis of rotation, so the change in magnetic flux is given by:

ΔΦ = B*A*cos(θ)*Δt

Where B is the magnetic field strength, A is the area of the loop, θ is the angle between the magnetic field and the normal to the loop (which is 90 degrees in this case), and Δt is the time interval over which the change occurs.

Since the loop is rotating at a constant speed, the time interval over which the change occurs is equal to the time it takes for the loop to complete one revolution, which is:

Δt = 1/87 s

Plugging in the given values, we get:

ΔΦ = (0.08 T)*(0.08 m2)*(1)*(1/87 s) = 0.000921 Tm2/s

Next, we can calculate the induced EMF using the formula:

EMF = -NΔΦ/Δt

Plugging in the given values, we get:

EMF = -(1017)*(0.000921 Tm2/s)/(1/87 s) = -82.05 V

Since the EMF is negative, this means that the induced voltage is in the opposite direction to the direction of the current flow in the loop.

For more such questions on EMF.

https://brainly.com/question/14300059#

#SPJ11

No, you will not accelerate.

Acceleration is the rate of change of velocity, which is a vector quantity that includes both magnitude and direction. If your velocity did not change in direction, then you did not accelerate.

In your case, you moved one meter in one second while facing north. Since your velocity did not change in direction, you did not accelerate. However, you did have a non-zero average speed of 1 meter per second over that one second interval. Speed is a scalar quantity that only includes magnitude, not direction. So, while you did not accelerate, you did have a non-zero speed for that short period of time.

To know more about acceleration, here

brainly.com/question/12550364

#SPJ4

--The complete question is, Let's say i was standing in one spot (zero speed facing north). then i took one step (one meter) and it took me a second to do so (still facing north). did i accelerate?--

The energy released by the fusion of a 2.25-kg mixture of deuterium and tritium, which produces helium, is approximately [tex]2.821 * 10^{-13} J.[/tex]

The energy released by the fusion of a mixture of deuterium and tritium into helium can be calculated using the formula:

[tex]E = \Delta m \cdot c^2[/tex]

where E is the energy released, Δm is the change in mass during the fusion process, and c is the speed of light (approximately [tex]3.00 * 10^8 m/s[/tex]).

The change in mass Δm can be calculated using the difference between the mass of the reactants and the mass of the products:

[tex]\Delta m = (2 \cdot m_d + 3 \cdot m_t) - 4 \cdot m_h[/tex]

where [tex]m_d[/tex] is the mass of a deuterium nucleus (2.0141 u), [tex]m_t[/tex]is the mass of a tritium nucleus (3.0160 u), and [tex]m_h[/tex] is the mass of a helium nucleus (4.0026 u).

The mass of a nucleus in atomic mass units (u) can be converted to kilograms using the conversion factor [tex]1.66 * 10^{-27} kg/u.[/tex]

Substituting the values and simplifying, we get:

[tex]\Delta m = (2 \cdot 2.0141 \, \text{u} + 3 \cdot 3.0160 \, \text{u}) - 4 \cdot 4.0026 \, \text{u} = 0.0189 \, \text{u}[/tex]

Δm in kilograms is therefore:

[tex]\Delta m = 0.0189 \, \text{u} \cdot (1.66 \times 10^{-27} \, \text{kg/u}) = 3.134 \times 10^{-30} \, \text{kg}[/tex]

The energy released E can now be calculated:

[tex]E = \Delta m \cdot c^2 = 3.134 \times 10^{-30} \, \text{kg} \cdot (3.00 \times 10^8 \, \text{m/s})^2[/tex]

[tex]= 2.821 * 10^{-13} J[/tex]

Therefore, the energy released by the fusion of a 2.25-kg mixture of deuterium and tritium, which produces helium, is approximately [tex]2.821 * 10^{-13} J.[/tex]

For more such questions on energy , Visit:

https://brainly.com/question/13881533

#SPJ11

The energy stored in the magnetic field in a cube of 12.7 light-years on edge is approximately 1.1 x 10⁷ joules.

The energy stored in a magnetic field can be calculated using the formula:

E = (1/2) × B² × V

where E is the energy, B is the magnitude of the magnetic field, and V is the volume of the region in which the field exists.

Given that the magnetic field in the interstellar space of our galaxy has a magnitude of 1.13 × 10⁻¹⁰ T and the volume of a cube of 12.7 light-years on edge, we can calculate the energy stored in this magnetic field as follows:

V = (12.7 ly)³

= (12.7 x 9.461 x 10¹⁵ m)³

= 1.39 x 10⁴⁹ m³

E = (1/2) × (1.13 × 10⁻¹⁰ T)² × 1.39 x 10⁴⁹ m³

E = 1.1 x 10³⁷ joules

Therefore, the energy stored in the magnetic field in a cube of 12.7 light-years on edge is approximately 1.1 x 10⁷ joules.

To learn more about joules the link:

https://brainly.com/question/25982371

#SPJ4

The complete question is:

The magnetic field in the interstellar space of our galaxy has a magnitude of about 1.13 × 10⁻¹⁰ T. How much energy is stored in this field in a cube 12.7 light? years on edge? (For scale, note that the nearest star is 4.3 light? years distant and the radius of the galaxy is about 8 × 10⁴ light? years.)

is a wheel with a concave edge for supporting a moving rope that is changing direction.

A sheave is a wheel with a concave edge for supporting a moving rope that is changing direction. A sheave helps to reduce friction and increase efficiency when managing ropes in various applications.

The term you are looking for is "pulley". A pulley is a simple machine that consists of a wheel with a grooved rim or concave edge, which is designed to support a moving rope or cable and change its direction of motion. Pulleys are commonly used in various applications, such as lifting heavy objects, moving loads, and transmitting power between machines.

They can also be combined with other pulleys and mechanical systems to create complex machines that perform a wide range of tasks.

To know more about  direction of motion:

https://brainly.com/question/3421105

#SPJ11

The law of conservation of energy states that energy is neither created nor destroyed but is transformed from one form to another.

The law of conservation of energy is the law that states that energy is neither created nor destroyed but is transformed from one form to another.

Examples of activities of everyday life that shows the conservation of energy include the following:

Learn more about energy here:

https://brainly.com/question/25959744

#SPJ1

An example of the law of conservation of energy is a roller coaster.

The law of conservation of energy states that energy cannot be created or destroyed, only transferred or transformed from one form to another. This means that the total amount of energy in a closed system remains constant over time.

A roller coaster car gains kinetic energy as it moves down the track, but it also loses potential energy. At the bottom of the track, the car has the most kinetic energy and the least potential energy, while at the top of the track, it has the most potential energy and the least kinetic energy. However, the total amount of energy in the system remains constant.

Learn about law of conservation of energy here https://brainly.com/question/166559

#SPJ1

The calorimeter has tap water in it, but it actually contains salt water (which has a lower specific heat than tap water, then the student may make an error in their calorimetry calculation.

Calorimetry is the science of measuring the heat of chemical reactions or physical changes, and the study of the relationship between heat, temperature, and energy. It is used to measure the amount of heat energy released or absorbed in a chemical or physical change, and to calculate the enthalpy change of a reaction.

Reaction is a process that results in the transformation of one or more substances into different substances. Chemical reactions involve the breaking and formation of chemical bonds between atoms, ions, or molecules, and can be accompanied by the release or absorption of energy in the form of heat, light, or electricity.

To know  more about calorimetry visit :

https://brainly.com/question/11477213

#SPJ1

I can suggest three sports that could be interesting to explore the physics behind them:

Golf

Skateboarding

Snowboarding/Skiing

Golf: Golf is a sport that involves a lot of physics, such as the motion of the ball, the force applied to the club, and the aerodynamics of the ball. Exploring the physics behind golf can be fascinating.

Skateboarding: Skateboarding is another sport that involves many physics concepts, such as friction, gravity, and momentum. It would be interesting to investigate the physics behind the tricks that skateboarders perform and the forces involved.

Snowboarding/Skiing: Snowboarding and skiing also involve physics concepts such as momentum, gravity, and friction. The physics behind carving turns and jumping can be a fascinating topic to explore.

All three of these sports have unique and exciting aspects of physics to explore and could make great topics for a project.

Learn more about sport on

https://brainly.com/question/1528405

#SPJ1

True. The ecliptic plane is the plane that contains the Earth's orbit around the Sun. As they roughly orbit the Sun in the same plane, planets should be found close to the ecliptic while looking for them in the sky.

The apparent path of the Sun across the sky over the course of a year, as seen from Earth, is known as the ecliptic. The orbit of the Earth around the Sun is also contained inside this plane. The other planets in our solar system are similarly visible close to the ecliptic because they orbit the Sun in a similar general plane. The inclination of the planets' orbits and the Earth's rotation around the Sun, however, cause the positions of the planets with respect to the ecliptic to change throughout time.

learn more about planets here:

https://brainly.com/question/14581221

#SPJ11

The magnitude of the force is 25 Newtons.

We can use Newton's second law, which states that the net force (F_net) acting on an object is equal to its mass (m) times its acceleration (a):

[tex]fnet = m*a[/tex]

The final velocity can be calculated using the formula:

[tex]v = d/t[/tex]

where d is the distance travelled and t is the time taken. Plugging in the values, we get:

v = 32 m / 8.0 s

v = 4.0 m/s

Therefore, the acceleration is:

a = Δv / Δt

a = 4.0 m/s / 8.0 s

a = 0.5 m/s^2

Now we can use Newton's second law to find the magnitude of the force:

F_net = 50 kg * 0.5 m/s^2

F_net = 25 N

To know more about newton's second law:

https://brainly.com/question/13447525

#SPJ4