Answer:
The molarity of the diluted solution will be 0.208 M.
Explanation:
Dilution consists of a procedure to prepare a less concentrated solution from a more concentrated one. It is achieved by adding more solvent to the same amount of solute.
The quantity or mass of the solute is not changed but only that of the solvent. As only solvent is being added, the consequence is that by not increasing the amount of solute but if the amount of solvent, the concentration of the solute decreases.
The expression for a dilution is:
Ci * Vi = Cf * Vf
where
Ci: initial concentration Vi: initial volume Cf: final concentration Vf: final volumeIn this case:
Ci= 0.25 M Vi= 125 mL Cf= ? Vf= Vi + 25 mL= 125 mL + 25 mL= 150 mLReplacing:
0.25 M* 125 mL= Cf* 150 mL
Solving:
[tex]Cf=\frac{0.25 M*125 mL}{150 mL}[/tex]
Cf= 0.208 M
The molarity of the diluted solution will be 0.208 M.
List three differences between the earth 240 million years ago and the present earth.
Give the word and chemical equations (including state symbols) for the reaction of potassium and water
Zinc will displace copper from a solution of copper sulfate, and magnesium will displace zinc from a solution of zinc sulfate
a)Write full, balanced chemical equations for the two reactions using state symbols.
Answer:
Zinc is Zn and Magnesium is Mg
Why do gems have different properties than metals? Claim,evidence and Reasoning
Answer:
Gems are natural material, metals are man-made materials!
Explanation:
Minerals occur naturally in the earth's crust and are defined as inorganic solids that have characteristic chemical composition and crystalline structures. ... A gemstone or gem is a piece of mineral crystal, which, in cut and polished form, is used to make jewelry or other adornments.
The explanation regarding the gems contains the various properties as compared to the metals should be described below:
Gems should be composed of the similar substance while on the other hand the metal compose of two or more elements of metallic. Gems should compose of non-metallic elements. Also, the gem does not compose of free electrons. While on the other hand, metal compose of free electrons that conduct electricity. So it does not conduct electricity such as metals.In this way, it should be explained.
Learn more: brainly.com/question/362440
How many moles of iron would be needed to react with 3.82 moles of
oxygen
The number of moles of iron (Fe) required to react with 3.82 moles of oxygen is 5.09 moles
Balanced equation
3O₂ + 4Fe —> 2Fe₂O₃
From the balanced equation above,
3 moles of O₂ reacted with 4 moles of Fe
How to determine the moles of FeFrom the balanced equation above,
3 moles of O₂ reacted with 4 moles of Fe
Therefore,
3.82 moles of O₂ will react with = (3.82 × 4) / 3 = 5.09 moles of Fe
Thus, 5.09 moles of Fe is needed for the reaction
Learn more about stoichiometry:
https://brainly.com/question/14735801
In the reaction below, 22 g of H2S with excess
O2 produced 5 g of sulfur.
? H2S + ? O2 → ? S + ? H2O .
What is the percent yield of sulfur?
Answer in units of %.
Answer:
24.1 %
Explanation:
This is the reaction of oxygen between hydrogen sulfide.
The equation is:
2H₂S + O₂ → 2S + 2H₂O
As the oxygen is the excess, limting reagent is the H₂S.
We convert the mass to moleS: 22g / 34.06 g/mol =
0.646 moles
Ratio is 2:2. 2 moles of sulfide can produce 2 moles of sulfur.
Then, 0.646 moles of sulfide will produce 0.646 moles of S.
We convert the moles to mass: 0.646 mol . 32.06 g/mol =
20.71 g
That's the theoretical yield.
% yield = (produced yield / theoretical yield) . 100
% yield = (5 g/ 20.71g) . 100 = 24.1 %
Hardness, high melting point, brittleness, non-conductivity, unsolubility in water,.....Are characteristics of ......?
Answer:
Covalent Network Solids
Explanation:
A covalent network solid or network solid is defined as the chemical compound in which the atoms are joined by a covalent bond in continuous network and it extends all through the material. There are no single molecules on a network solid, the whole crystal may be considered as a macromolecule.
Some of the characteristics of the covalent network solids are :
It is very hard.It is non conductive.It is highly brittle.It has high melting point.It is insoluble in water.The empirical formula for butene is
A.
CH2
B.
C₂H4
C.
Ca HG
D
C4H8
What property of water allows the water to cover the astronauts hand?
Answer:
The tendency for water molecules to stick together causes it to causes spheres in space. ... Magnetic-like molecules on water's surface cause the surface to behave like an elastic skin. Each molecule is pulled with equal tension by its neighbors.J
Explanation:
Which of the following represents a double-displacement reaction?
a. ABC ➡️AB +C
b. A+B ➡️AB
c. AB + CD➡️AD + CB
d. A + BC ➡️AC + B
which is the correct order of ease of carbon dioxide production by heating the group II metal carbonates?
Which is the correct order of ease of carbon dioxide production by heating the group II metal carbonates?
A) [tex]BaCO_{3} > SrCO_{3} > CaCO_{3} > MgCO_{3}[/tex]
B) [tex]MgCO_{3} > CaCO_{3} > SrCO_{3} > BaCO_{3}[/tex]
C) [tex]CaCO_{3} > MgCO_{3} > BaCO_{3} > SrCO_{3}[/tex]
D) [tex]SrCO_{3} > BaCO_{3} > CaCO_{3} > MgCO_{3}[/tex]
Answer:
Explanation:
The correct option is A:
[tex]BaCO_{3} > SrCO_{3} > CaCO_{3} > MgCO_{3}[/tex]
On the periodic table, carbonates required stronger heating as one does down the groupings in order for them to decompose. The implication is that the stability of compounds will increase from [tex]MgCO_{3}[/tex] to [tex]BaCO_{3}[/tex] .
So the carbonates will be stable according to the following order:
[tex]BaCO_{3} > SrCO_{3} > CaCO_{3} > MgCO_{3}[/tex], thus making B the correct answer.
Cheers
Which statement describes the endothermic reaction represented by this
graph?
Answer:
Option A, describes the endothermic reaction represented by this graph
Explanation:
In this graph the energy released (or the potential energy) at the time of product formation is lower than the potential energy of the reactants. Hence, additional energy input will be required to form the product. Thus, energy is absorbed during the reaction.
Option A is correct
Answer: energy is given off by the reaction
Explanation:
Determine the pH of a 2.8 ×10−4 M solution
of Ca(OH)2.
Answer:
pH = 10.75
Explanation:
To solve this problem, we must find the molarity of [OH⁻]. With the molarity we can find the pOH = -log[OH⁻]
Using the equation:
pH = 14 - pOH
We can find the pH of the solution.
The molarity of Ca(OH)₂ is 2.8x10⁻⁴M, as there are 2 moles of OH⁻ in 1 mole of Ca(OH)₂, the molarity of [OH⁻] is 2*2.8x10⁻⁴M = 5.6x10⁻⁴M
pOH is
pOH = -log 5.6x10⁻⁴M
pOH = 3.25
pH = 14-pOH
pH = 10.75in an ionic bond:
A. both atoms share their electrons.
B. one atom accepts electrons from another.
C. The atoms attract each other but their electrons do not interact.
D. The atoms swap electrons
What is the poH of a solution that has an [H+] = 7.7 x 10-7 M? *
O 7.9
6.5
O 2.3
Answer:
7.9
Explanation:
pH=-log([H+])
pH=-log(7.7×10⁻⁷M)
pH=6.113509275
Now, poH + pH = 14
Making poH the subject,
poH=14-pH
poH=14-6.113509275
poH=7.886490725
≈7.9
∴poH≈7.9
What is the mass of 1 mole of Na3,PO4?
Answer:
163.940671 grams
Explanation:
You can view more details on each measurement unit: molecular weight of Na3PO4 or grams This compound is also known as Trisodium Phosphate. The SI base unit for amount of substance is the mole. 1 mole is equal to 1 moles Na3PO4, or 163.940671 grams.
calculate the concentration of the solution produced when a 3.2g of sodium chloride is
issolved in 8dm of water.
Answer:
The concentration of the 3.2 g of sodium chloride in 8 dm³ of water is 6.845 × 10⁻³ M
Explanation:
The concentration of a solution is given as either the ratio of mass to volume, or the ratio of volume to volume or as molarity
[tex]Concentration, C = \dfrac{Mass}{Volume} = \dfrac{Volume}{Volume} = \dfrac{Number \ of \ moles }{Liters \ of \ solution}[/tex]
The number of moles present in 3.2 g of sodium chloride, 'n', is given as follows;
[tex]n = \dfrac{Mass}{Molar \ mass}[/tex]
The molar mass of sodium chloride, NaCl = 58.44 g/mol
n = 3.2 g/58.44 g/mol = 0.0547570157 moles
8 dm³ = 8 Liters
Therefore, the concentration, C = 0.0547570157 moles/(8 liters) = 6.845 × 10⁻³ M
The concentration of the 3.2 g of sodium chloride in 8 dm³ of water = 6.845 × 10⁻³ Molar solution.
Some of the glucose required for cellular respiration in humans is obtained by??
Answer:
.
Explanation:
Some of the glucose required for cellular respiration in humans is obtained by external food source which are rich in carbohydrates.
What is cellular respiration?Cellular respiration is the process in which cells combines the oxygen with the foodstuff molecules, and converting the chemical energy into life sustaining activities as energy.
In the human body, we get the glucose for the cellular respiration from the external food source which are riched in carbohydrates, starch, etc. After converting the chemical energy to glucose then oxygen is absorbed in the lungs and circulate the blood through out the body by red blood cells.
Hence, we get glucose from food source.
To know more about cellular respiration, visit the below link:
https://brainly.com/question/2809259
Need help on this question asap pleasee I would really appreciate it
Answer:
See Explanation
Explanation:
An endothermic reaction is one in which energy is absorbed and the change in enthalpy for the reaction is positive.
If we look at the reaction 2HgO + 45kcal ----> 2Hg + O2; we will notice that
i) 45kcal of energy was taken in (absorbed) for the reaction to occur
ii) The value of the reaction enthalpy is positive
For these two reasons, the reaction is an endothermic reaction as written.
Can any one plz solve and send this question who ever solve this right I will make you brainliest this is physic
Answer: Energy = 10000J - 2000J = 8000J
Therefore, the energy is dissipated the skier moves down to the slope is 8000J
Explanation:
How many grams of HCl are needed to form 34.5 grams of Cl2?
Answer:
Expof HCl are required to produce 7.50 moles of ZnCl2? 6. Copper ... When 9.34 g of zinc react with excess hydrochloric acid how many grams of zinc chloride will.lanation:
The moon appears to change _________ over the course of the _______________.
Answer:
shape or size? over the course of the month
Elements o fb the same group have the same chemical properties
Answer:
The chemical elements are arranged in order of increasing atomic number. The horizontal rows are called periods and the vertical columns are called groups. Elements in the same group have similar chemical properties. This is because they have the same number of outer electrons and the same valency.
When V increases, I _______ . It is a direct relationship
A. increases
B. decreases
C. remains constant
Answer:
B
Explanation:
Select the correct arrows. Which arrows indicate weathering and erosion? sedimentary rocks metamorphic rocks igneous rocks
Answer:
igneous to sedimentary rock
Explanation:
Answer:
ingeous rocks to sedimentary rocks
The half-life of radium-226 is 1,600 years. It decays into radon-222. What fraction of the original amount of radium-226 in a sample will still be radium
after 8,000 years?
A.1/8
B.1/4
c.1/32
D.1/16
Answer:
Your answer will be C. 1/32
Answer:
C. 1/32
Explanation:
1. Scientists create both scientific theories and scientific laws as they make observations and conduct experiments about the natural world. Which of the following statements most accurately compares the difference between scientific theories and scientific laws?
a) Scientific laws are based on evidence, while scientific theories are not.
b) Scientific theories involve only biology, while laws involve all types of science.
c) Scientific theories involve mathematical equations, while scientific laws are based on observations.
d) Scientific theories are ideas that explain natural events, while scientific laws more reliably predict natural events
Answer:
D
Explanation:
While scientific laws more accurately forecast natural events, scientific theories are beliefs that explain natural happenings. So, the correct option is D.
What is the difference between scientific laws and scientific theories?Scientific laws are explanations for why certain occurrences occur or explanations of the phenomenon occurring itself. The outcomes or the causes of such phenomena are not explained. By stating a link verbally or mathematically, it only clarifies the situation and makes the underlying "science" simpler to comprehend.
On the other hand, scientific theories are those that make an effort to define or clarify why a phenomenon occurs. Its foundation is observation. Before drawing a conclusion, there is still a process of learning or discovery. It is a conceptual framework for explaining and projecting new information.
Thus, the correct option is D.
Learn more about Scientific theories, here:
brainly.com/question/2375277
#SPJ3
Instructions
Click the links to open the resources below. These resources will help you complete the assignment. Once you have created your file(s) and are ready to upload your assignment, click the Add Files button below and select each file from your desktop or network folder. Upload each file separately.
Now that the lab is complete, it is time to write your lab report. The purpose of this guide is to help you write a clear and concise report that summarizes the lab you have just completed.
The lab report is composed of four sections:
Section I: Experimental Overview
• Provide background information.
• Include the hypothesis(es).
• Summarize the procedures.
Section II: Data and Observations
• Summarize the data you collected in the lab guide.
• Include information from data tables.
• Include any written observations that are relevant.
Section III: Analysis and Discussion
• Discuss any important calculations or formulas used.
• Identify key results, what the results indicate, and any trends in the data.
• Include graphs (if constructed) that display trends in the data.
• Provide possible reasons for any problems with the experiment, or unexpected data.
Section IV: Conclusions
• Identify if the hypothesis(es) was (were) supported or refuted.
• Provide logical reasoning based on data.
• Explain how the experiment could be improved.
To help you write your lab report, you will first answer the questions listed below by reflecting on the experiment you have just completed. Then you will use the answers to these questions to write the lab report that you will turn into your teacher.
You can upload your completed report with the upload tool in formats such as OpenOffice.org, Microsoft Word, or PDF. Alternatively, your teacher may ask you to turn in a paper copy of your report or use a web-based writing tool.
Questions
Section I: Experimental Overview
• What is the purpose of the lab, the importance of the topic, and the question you are trying to answer?
• What is your hypothesis (or hypotheses) for this experiment?
• What methods are you using to test this (or each) hypothesis?
Section II: Data and Observations
• Locate the data and observations collected in your lab guide. What are the key results? How would you best summarize the data to relate your findings?
• Do you have quantitative data (numerical results or calculations)? Do you have qualitative data (written observations and descriptions)? How can you organize this date for your report?
Section III: Analysis and Discussion
• What do the key results indicate?
• If you constructed graphs, what trends do they indicate in your data?
• Were there any problems with the experiment or the methods? Did you have any surprising results?
Section IV: Conclusions
• What do the results tell you about your hypothesis(es)?
• How do the data support your claim above?
• If you could repeat the experiment and make it better, what would you do differently and why?
Just putting a comment here, I needed to test something
A gas at 1.10 atm and 30.0°C fills a flexible container with an initial volume of 2.00 L. If the temperature is raised to 80.0°C and the pressure increased to 2.40 atm, what is the new volume?
Answer:
P1=1.10atm
V1=2.00L
T1=30.0+273=303
P2=2.40atm
V2=?
T2=80.0+273=353
Explanation:
V2=1.10*2.00*353=776.6
2.40*303=727.2
776.6/727.2=1.0679L
The new volume occupied by the of gas as its temeprature and pressure is raised is 1.07L.
Combined gas lawCombined gas law put together both Boyle's Law, Charles's Law, and Gay-Lussac's Law. It states that the ratio of the product of volume and pressure and the absolute temperature of a gas is equal to a constant.
It is expressed as;
P₁V₁/T₁ = P₂V₂/T₂
Given the data question;
Initila pressure P₁ = 1.10atmFinal pressure p₂ = 2.40atmInital temperature T₁ = 30.0°C = 303.15KFinal temperature T₂ = 80.0°C = 353.15KInitial Volume V₁ = 2.00LFinal Volume V₂ = ?To calculate the new volume that the gas occupy, we subtsitute our given values into the expression above.
P₁V₁/T₁ = P₂V₂/T₂
P₁V₁T₂ = P₂V₂T₁
V₂ = P₁V₁T₂ / P₂T₁
V₂ = ( 1.10atm × 2.00L × 353.15K ) / ( 2.40atm × 303.15K )
V₂ = 776.93LatmK / 727.56atmK
V₂ = 1.07L
Therefore, The new volume occupied by the of gas as its temeprature and pressure is raised is 1.07L.
Learn more about the combined gas law here: brainly.com/question/25944795
compare and contrast between combustion and rusting
Answer:
combustion is fast and destructive it also involves a lot of movement of the atoms where erosion is a slow process that does not involve a lot of energy
How many electrons are represented by a dash (-) in a lewis dot structure compound?
A. 2
B. 4
C.3
D. 1