Answer:
the answer is c
Explanation:
He likes to eat (into passive voice)
Answer:
yes he does
Explanation:
analyse the extent to which the media portrays unhealthy body images and discuss how this may affect individuals
If a 5 kg cart is pulled with a net force of 20 Newtons. What is the magnitude, in m/s2, of the acceleration?
Answer:
F=ma
a=F/m=20/5=4 m/s^2
Please help?? PWEASE PWEASE PWEASE
Describe how you would draw a diagram that shows the electric field between two particles that attract each other.
Answer:
draw the two atomic structures and then focus in on the electrons either gaining or losing and draw them with arrows and dots
Explanation:
Why does the cannon move backward when the cannon ball is shot?
Answer:
This came to mind
Explanation:
when a cannon fires (in real life or in the movies) have noticed that the cannon recoils, sliding backwards after the explosion. Again, a non-zero net force on the cannon changes its momentum.
A wire has compasses placed around it and a current is passed through the wire. What happens to the compasses
Answer:
If you hold a compass near a wire through which current is flowing, the needle on the compass will be deflected. Since compasses work by pointing along magnetic field lines, this means that there must be a magnetic field near the wire through which the current is flowing
Explanation:
good luck
What are 4 physical properties for the carrots
Answer:
length, width, thickness, mean diameter
mass, volume, density, sphericity, surface area, aspect ratio.Jan 7, 2019
Explanation:
Answer:
Since, In Chemical change the property of the substance is changed resulting in the formation of a new substance where as In Physical change the property of the substance remains unchanged resulting in the formation of no new substance. Therefore, Cutting of Carrot is a physical change.
Explanation:
hope this helps :)
Please help me lol :|
Answer:
1 is community 2 habitat 4 producer 5 consumer 6 food chain 7 predator 8 prey sorry I don't know 4
A wagon with an initial velocity of 2 m/s and a mass of 60 kg, gets a push with 150 joules of
force. Apply your scientific knowledge and understanding of work-energy theorem to calculate
the wagon's final velocity.
Answer:
v_f = 3 m/s
Explanation:
From work energy theorem;
W = K_f - K_i
Where;
K_f is final kinetic energy
K_i is initial kinetic energy
W is work done
K_f = ½mv_f²
K_i = ½mv_i²
Where v_f and v_i are final and initial velocities respectively
Thus;
W = ½mv_f² - ½mv_i²
We are given;
W = 150 J
m = 60 kg
v_i = 2 m/s
Thus;
150 = ½×60(v_f² - 2²)
150 = 30(v_f² - 4)
(v_f² - 4) = 150/30
(v_f² - 4) = 5
v_f² = 5 + 4
v_f² = 9
v_f = √9
v_f = 3 m/s
Why does it take 2 days longer for the Moon to go from New Moon to New Moon when viewed form the Earth than it takes for the the moon to make 1 complete rotation on its axis?
The time between two new Moon phases or two full Moon phases is 29.5 days. ... The difference of 29.5 and 27.3 is that while the Moon is orbiting the Earth, the Earth is moving along in its orbit so it takes longer for the Moon to reach the same position relative to the Sun.
3.The space heater in a room does not have a fan, but after a few minutes you feel warm air moving by you. What type of energy transfer?
help pls help help help
Answer:
do u still need the answer it has been 2 weeks ?
Explanation:
Richard Julius once made a model plane that could travel a max speed of 110 m/s. Suppose the plane was held in a circular path by a control line. Suppose the plane ran out of gas while moving at its maximum speed and Richard Julius pulled the line in to bring the plane home while it continued in a circular path. If the line's initial length is 120 m and Richard Julius shortened the line by 0.80 m every second, what was the plane's speed after 33.0 s?
Answer:
85.8 m/s
Explanation:
We know that the length of the circular path, L the plane travels is
L = rθ where r = radius of path and θ = angle covered
Now,its speed , v = dL/dt = drθ/dt = rdθ/dt + θdr/dt
where dθ/dt = ω = angular speed = v'/r where v' = maximum speed of plane and r = radius of circular path
Now, from θ = θ₀ + ωt where θ₀ = 0 rad, ω = angular speed and t = time,
θ = θ₀ + ωt = 0 + ωt = ωt
So, v = rdθ/dt + θdr/dt
v = rω + ωtdr/dt
v = (r + tdr/dt)ω
v = (r + tdr/dt)v'/r
v = v' + tv'/r(dr/dt)
v = v'[1 + t(dr/dt)/r]
Given that v' = 110 m/s, t = 33.0s, r = 120 m and dr/dt = rate at which line is shortened = -0.80 m/s (negative since it is decreasing)
So, v = 110 m/s[1 + 33.0 s(-0.80 m/s)/120 m]
v = 110 m/s[1 + 11.0 s(-0.80 m/s)/40 m]
v = 110 m/s[1 + 11.0 s(-0.02/s)]
v = 110 m/s[1 - 0.22]
v = 110 m/s(0.78)
v = 85.8 m/s
Motion is
displacement
an object you look at to determine if something is moving
a change of position in relation to another object
speed
Answer:
a change of position in relation to another object.
Explanation:
Motion can be defined as a change in the location (position) of a physical object or body with respect to a reference point.
This ultimately implies that, motion would occur as a result of a change in location (position) of an object with respect to a reference point or frame of reference i.e where it was standing before the effect of an external force.
A reference point refers to a location or physical object from which the motion (movement) of another physical object or body can be determined.
Mathematically, the motion of an object is described in terms of acceleration, time, distance, speed, velocity, displacement, position, etc.
Hence, motion is a change of position in relation to another object.
2. A ball is dropped from rest. The acceleration due to gravity is 10m/s? and the time it
takes for the ball to reach the ground is 5 seconds. What was the velocity of the ball just
before it hits the ground
Answer:
STEP BY STEP
V = S/T
V= 10/5
V = 2 m/s
please answer of of them.
Answer:
1. 7.5 km/h
2. 1 hour, 52 minutes, 30 seconds
3. 0.8 Joules
4. 13.33 mph
5. 19456 Joules
6. 10.5 kg
Explanation:
Which region on the map has the highest risk of future landslides?
Answer:
Reigon 1
Explanation:
It has the higest rate of landslides currently
You wake up in the morning and get out of bed. Does the floor feel cold or warm on your bare feet? On the lines below, write a sentence that compares how it feels to step on a bare floor and on a rug on a cold morning
When you get out of bed in a morning it's most likely too be cold so your bare feet on a floor not carpet a bare floor will feel cold since the temperature and molecules had changed and if you step on a warm fuzzy rug it will feel warm since your feet are cold and the rugs fuzziness or material keeps you warn
We feel more cold on feet on morning because heat from our feet will flow to the cold floor. We feel more cold on the bare floor than the rug since it conducts heat away from our feet.
What is heat transfer?Heat will be transfer on a temperature gradient from one substance to the other. Heat is transferring from the hot body to the colder body. There are three types of heat transfer are there namely, conduction, convection and radiation.
Conduction is the heat transfer in solids , convection in liquids and radiation is the heat or energy transfer mode in gases and vacuum. At the morning, the floor will be more cool whereas our body will be hotter, thus heat will flow our body to floor make our feet cool.
A bare floor will conduct thermally more than a rug do. Thus the bare floor conducts heat away from our feet and make our feet more cool.
To find more on heat transfer, refer here:
https://brainly.com/question/13433948
#SPJ2
HELPPP!!!! I'LL GIVE BRAINLIEST TO THE CORRECT ANSWER!!
Which uses direct current?
A) A toaster oven thingy (look at pic)
B) A flashlight (look at pic)
C) A microwave (look at pic)
D) A vacuum (look at pic)
Answer:
Which uses direct current - A flash light.
Explanation:
Hope you have a great day.
Oliver builds a circuit connecting a light bulb to a battery with wires, leaving a gap in one of the wires. He places several objects across the gap to close the loop. He wants to see which objects allow electricity to flow and turn on the light bulb. Why do some materials allow electricity to flow through while others do not?
A-Electricity will flow if the atoms in the material are bound tightly to each other.
B-Electricity will flow if the atoms in the material are bound loosely to each other.
C-Electricity will flow if the electrons are bound tightly to their atoms in the material.
D-Electricity will flow if the electrons are bound loosely to their atoms in the material.
Answer:
C-Electricity will flow if the electrons are bound tightly to their atoms in the material.
Explanation:
The flow of electricity through a material is determined by the condition of the electron which make of the atoms of the material. For example, in iron metal, the electron of the material is bounds tightly to their atoms. Do to this reason, the electricity can flow freely inside them unlike the plastic material which has no tightly bound electrons.
UM CAN SOME GIVE ME THE ANSWER PLS IM LIKE DYING I RLLY NEED THE ANSWER ITS DUE IN 2 MIN
In addition to thermal conductivity, what other properties of materials would
need to be considered when designing and building houses? Give three
suggestions.
Answer:
Wood, metal, Stone
Explanation:
Answer:
Thermal resistance,Specific Heat Capacity,Density
Explanation:
Can someone helpppp plsssss
(this is on motion graphs)
Answer:
Only at point a
Explanation:
If the velocity is greater than zero, than the object must be moving.
an elevator provides 21 000 w of power during a 12 s ride. how much work does the elevator do?
Answer:
252000 J
Explanation:
W = Pt
W = (21000 w)(12 s)
W =252000 J
A measure of the average kinetic energy per particle in a quantity of matter
Multiple-Concept Example 6 presents a model for solving this problem. As far as vertical oscillations are concerned, a certain automobile can be considered to be mounted on four identical springs, each having a spring constant of 1.21 x 105 N/m. Then, four identical passengers are seated in the car, and it is set into a vertical oscillation that has a period of 0.371 s. If the mass of the empty car is 1400 kg, determine the mass of each passenger. Assume that the mass of the car and its passengers is distributed evenly over the springs.
Answer:
[tex]71.865\ \text{kg}[/tex]
Explanation:
Mass of car = 1400 kg
T = Time period = 0.371 s
k = Spring constant = [tex]1.21\times 10^{5}\ \text{N/m}[/tex]
Time period is given by
[tex]\dfrac{1}{T}=\dfrac{1}{2\pi}\sqrt{\dfrac{k}{m}}\\\Rightarrow m=4\dfrac{kT^2}{4\pi^2}\\\Rightarrow m=\dfrac{4\times 1.21\times 10^5\times (0.371)^2}{4\pi^2}\\\Rightarrow m=1687.46\ \text{kg}[/tex]
The 4 in the numerator is because there are 4 springs
Mass of car with people is 1687.46 kg.
Mass of people
[tex]1687.46-1400=287.46\ \text{kg}[/tex]
Mass of each person
[tex]\dfrac{287.46}{4}=71.865\ \text{kg}[/tex]
Mass of each person is [tex]71.865\ \text{kg}[/tex].
Conservation of momentum
Answer:
The combined velocity of Sally and the sled is 1.688 meters per second.
Explanation:
Let suppose that Sally collides inelasticly, meaning that final velocity of Sally-sled system can be determined solely by Principle of Momentum Conservation:
[tex]m_{S}\cdot v_{S, o} + m_{s}\cdot v_{s,o} = (m_{S}+m_{s})\cdot v[/tex] (1)
Where:
[tex]m_{S}[/tex] - Mass of Sally, measured in kilograms.
[tex]m_{s}[/tex] - Mass of the sled, measured in kilograms.
[tex]v_{S,o}[/tex] - Initial velocity of Sally, measured in meters per second.
[tex]v_{s,o}[/tex] - Initial velocity of the sled, measured in meters per second.
[tex]v[/tex] - Final velocity of the Sally-sled system, measured in meters per second.
If we know that [tex]m_{S} = 54\,kg[/tex], [tex]m_{s} = 10\,kg[/tex], [tex]v_{S,o} = 2\,\frac{m}{s}[/tex] and [tex]v_{s,o} = 0\,\frac{m}{s}[/tex], then the final velocity of the system is:
[tex]v = \frac{m_{S}\cdot v_{S,o}+m_{s}\cdot v_{s,o}}{m_{S}+m_{s}}[/tex]
[tex]v = 1.688\,\frac{m}{s}[/tex]
The combined velocity of Sally and the sled is 1.688 meters per second.
A roller coaster is released from the top of a track that is 125 m high. Find the rollar coaster speed when it reaches ground level.
Explanation:
A roller coaster is released from the top of a track that is 125 m high. Find the roller coaster speed when it reaches ground level. 75. A 1500 kg car, moving at a speed of 20 m/s comes to a halt. How much work was done .
HOPE IT HELPSmark me in brainliest answers please please pleaseThe roller coaster speed when it reaches to ground level is 15.65 m/sec
Given-
Roller coaster is released at a height of 125 meters.
It is known that, square of the final velocity [tex]v[/tex] of the body is equal to the sum of the square of initial velocity [tex]v_{10}[/tex] and the product of the twice of acceleration [tex]a[/tex] and displacement [tex]d[/tex]. It can be written as,
[tex]v^{2} =v_{0}^2+2ad[/tex]
Roller coaster released from rest therefore initial velocity is zero.
[tex]v^{2} =0+2ad[/tex]
[tex]v^{2} =2ad[/tex]
Roller coaster will fall towards the ground with an acceleration equal to gravity g and height of 125 m. therefore,
[tex]v^{2} =2\times g\times 125[/tex]
[tex]v^{2} =2\times 9.8\times 125[/tex]
[tex]v^{2} =2450[/tex]
[tex]v=15.65[/tex]
Hence, the roller coaster speed when it reaches to ground level is 15.65 m/sec.
For more about the velocity, follow the link below-
https://brainly.com/question/862972
A major contemporary learning view of personality which holds that personality traits result from a
person's learning history and his or her expectations, beliefs and other cognitions.
Answer:
hh
Explanation:
what equation describes these relationships?
1. (-3,-9), (-2,-6), (-1,-3), (0,0)
2. (3,0), (2,-1), (1,-2), (0,-3)
3. (0,0), (1,-3), (2,-6), (3,-9)
a. y=3x
b. y=-3x
c. y=x-3
An object is in front of a converging lens of f = 15 cm, what is the distance of the object if you know that the distance of the image is 20 cm ?
Answer:
ikn
Explanation:
Answer:
the distance is 15+20=35 cm