Explanation:
i think the answer is A ........ hope this helps
What mass of oxygen will react with 2.64 g of magnesium?
2Mg(s) + O2(g) → MgO(s)
Answer:
[tex](24 \times 2) \: g \: of \: magnesium \: reacts \: with \: (16 \times 2) \: g \: of \: oxygen \\ 2.64 \: g \: of \: magnesium \: will \: react \: with \: ( \frac{2.64 \times 16 \times 2}{24 \times 2} ) \: g \\ = 1.76 \: g \: of \: oxygen[/tex]
Can someone help me with a bio organic questions??♀️
meaning of alchol in one word
A plastic rod that have just been rubbed with a fur and kept near a negatively charged ballon that is freely suspended. The charged balloon moves away from the plastic. What does this explain you ?
Explanation:
that both the plastic & balloon have the same charge
BRAINIEST AND POINTS
Which option below accurately describes the relationship between frequency and wavelength?
A. The higher the frequency the shorter the wavelength.
B. The lower the frequency the shorter the wavelength.
Answer:
Hi, there your answer is A. As the frequency of a wave increases, the shorter its wavelength is.
Explanation:
When frequency increases, wavelength decreases.
Hope this Helps :)
If only 0.225 g of Ca(OH)2 dissolves in enough water to give 0.100 L of aqueous solution at a given temperature, what is the Ksp value for calcium hydroxide at this temperature
Answer: The [tex]K_{sp}[/tex] value for calcium hydroxide at this temperature is [tex]1.08 \times 10^{-4}[/tex].
Explanation:
Given: Mass of [tex]Ca(OH)_{2}[/tex] = 0.225 g
Volume = 0.100 L
As moles is the mass of substance divided by its molar mass.
So, moles of [tex]Ca(OH)_{2}[/tex] (molar mass = 74 g/mol) is calculated as follows.
[tex]Moles = \frac{mass}{molar mass}\\= \frac{0.225 g}{74 g/mol}\\= 0.003 mol[/tex]
Molarity is the number of moles of substance present in a liter of solution.
Hence, molarity of given solution will be as follows.
[tex]Molarity = \frac{moles}{Volume (in L)}\\= \frac{0.003 mol}{0.1 L}\\= 0.03 M[/tex]
The equation for dissociation of [tex]Ca(OH)_{2}[/tex] is as follows.
[tex]Ca(OH)_{2} \rightarrow Ca^{2+} + 2OH^{-}[/tex]
This means that [tex][Ca^{2+}] = 0.03[/tex] and [tex][OH^{-}] = 2 \times 0.03 = 0.06[/tex]. Hence, [tex]K_{sp}[/tex] value for this reaction is calculated as follows.
[tex]K_{sp} = [Ca^{2+}][OH^{-}]^{2}\\= (0.03) \times (0.06)^{2}\\= 1.08 \times 10^{-4}[/tex]
Thus, we can conclude that the [tex]K_{sp}[/tex] value for calcium hydroxide at this temperature is [tex]1.08 \times 10^{-4}[/tex].
When you test starch with Barfoed’s reagent, what would be the answer, positive or negative?
Answer:
It would test positive.
ok so i need a reasoning on What evidence have you discovered to explain how the curve of Earth’s surface affects temperatures on Earth?
A student went to the cafeteria and bought iced tea. He then proceeded to add more sugar to his iced tea. In this solution, the iced tea was the __________ and the sugar was the ____________.
A student enters the canteen and buys iced tea. He then goes on to add more sugar to his iced tea. In this solution, iced tea is the solvent and sugar is the solute.
7. In science, the process/thing that you examine/focus on is called the ??
and anything outside of this focus is called the ??
Answer:
Subject of the experiment and out of scope
Explanation:
In any research study, the process of thing studied is basically the subject of the experiment on which research is conducted to determine the outcomes. If any thing lies out of the experimental process reach, then it is said to be out of scope of the experiment.
Pick the correct statement about the pure water. Group of answer choices Pure water contains no ions. Pure water contains equal amounts of hydroxide [OH-] and hydronium [H3O ] ions. Pure water contains larger amounts of hydroxide [OH-] than hydronium [H3O ] ions. Pure water is an electrolyte. Pure water contains smaller amounts of hydroxide [OH-] than hydronium [H3O ] ions.
Answer:
Pure water contains no ions. TRUE
Pure water contains equal amounts of hydroxide [OH-] and hydronium [H3O+ ] ions. TRUE
Explanation:
This is the equilibrium for pure water:
2H₂O ⇄ H₃O⁺ + OH⁻ Kw
We see that pure water has no Ions. Pure water can not conduct electricity.
Generally ionized water comes from the water tap.
Another feature of pure water is pH.
Definetely pH of pure water is : 7
As pH = 7, [H₃O⁺] = 1×10⁻⁷
Then, [OH⁻] = 1×10⁻⁷
This is reazonable because Kw is 1×10⁻¹⁴ and Kw = [H₃O⁺] . [OH⁻]
In conclussion:
Pure water contains no ions. TRUE
Pure water contains equal amounts of hydroxide [OH-] and hydronium [H3O+ ] ions. TRUE
Pure water contains larger amounts of hydroxide [OH-] than hydronium [H3O+] ions. FALSE
Pure water is an electrolyte. FALSE
Pure water contains smaller amounts of hydroxide [OH-] than hydronium [H3O ] ions. FALSE
When an acid reacts with a strong base which product always forms
Answer:طيزي
Explanation:
5.
When 0.421 g of BaCl2:2H20 and 0.722g of Na3PO4.12H2O mix with water
forming 500 mL of solution, how many grams of Ba3(PO4)2 precipitate?
Explanation:
2H2O and 0.722g of Na3PO4.12H20 mix with water forming 500 mL of solution, how many grams of Ba3(. ... Forming 500 ML Of Solution, How Many Grams Of Ba3(PO4)2 Precipitate?
When 0.421 g of BaCl₂ · 2 H2O and 0.722g of Na₃PO₄ · 12 H₂O mix with water forming 500 mL of solution then 0.003 mol/L of Ba₃(PO4)₂ precipitate.
What is Stoichiometry ?Stoichiometry is an important concept which helps us use the balanced chemical equation to measures the amount of reactants and products.
What is Molarity ?Molarity of solution is the number of moles of solute per liter of solution. Molarity is also called Molar Concentration.
Molarity (M) = [tex]\frac{\text{number of moles}}{\text{volume of solution (in liters)}}[/tex]
How to find the number of moles ?Number of moles = [tex]\frac{\text{Given mass}}{\text{Molar mass}}[/tex]
First we have to write the balanced chemical equation
2Na₃PO₄ · 12 H₂O + 3BaCl₂ · 2 H2O → Ba₃(PO4)₂ + 6 NaCl + 30 H₂O
Here 3 moles of BaCl₂ · 2 H2O produce 1 mole of Ba₃(PO4)₂
So,
Number of moles of BaCl₂ · 2 H2O = [tex]\frac{\text{Mass of}\ BaCl_2 . 2H_2O}{\text{Molar mass of}\ BaCl_2. 2H_2O}[/tex]
= [tex]\frac{0.421}{244.26}[/tex]
= 0.017
Number of moles of 2Na₃PO₄ · 12 H₂O = [tex]\frac{\text{Mass of}\ Na_3PO_4. 12H_2O}{\text{Molar mass of}\ Na_3PO_4 . 12H_2O}[/tex]
= [tex]\frac{0.722}{380.12}[/tex]
= 0.002
Therefore, Na₃PO₄ · 12 H₂O is the limiting reagent.
Now, put the value in above formula to find the molarity
Molarity (M) = [tex]\frac{\text{number of moles}}{\text{volume of solution (in liters)}}[/tex]
= [tex]\frac{0.0017}{0.5}[/tex]
= 0.003 mol/L
Thus, from above conclusion we can say that 0.003 mol/L of Ba₃(PO4)₂ precipitate.
Learn more about the Stoichiometry here: https://brainly.com/question/14935523
#SPJ2
HELP PLS HELP i rlly need help omg
Calculate the percent composition by mass (to 4 significant figures) of all the elements in calcium phosphate [Ca3(PO4)2], a major component of bone.
Answer:
The elements present in calcium phosphate-based on molecular formula are calcium, phosphorus, and oxygen. The molecular mass of Ca or calcium is 40.08 grams per mole, the molecular mass of P or phosphorus is 30.97 grams per mole, and the molecular mass of oxygen is 16.00 grams per mole. So, in combination, the molecular mass of Ca₃(PO₄)₂ is, = (3 × 40.08 + 2 ×3 0.97 + 8 × 16) = 310.18 grams per mole
Now, the mass percent of calcium is, = n × molecular mass of calcium/ molecular mass of Ca₃(PO₄)₂ × 100% = 3 × 40.08 / 310.18 × 100 = 38.76 % Thus, the mass percent of the calcium in calcium phosphate is 38.76%.
The mass percent of phosphorus (P), = n × molecular mass of phosphorus/molar mass of Ca₃(PO₄)₂ × 100% = 2 × 30.97/310.18 × 100 = 19.97% Thus, the mass percent of phosphorus in calcium phosphate is 19.97%.
The mass percent of oxygen (O), = n × molecular mass of oxygen/molar mass of Ca₃(PO₄)₂ × 100% = 8 × 16/310.18 × 100% = 41.27% Thus, the mass percent of oxygen in calcium phosphate is 41.27%.
Calculate the volume of 0.07216 M AgNO3 needed to react exactly with 0.3572 g of pure Na2CO3 to produce solid Ag2CO3.
Answer:
93.4 mL
Explanation:
Let's state the reaction:
2AgNO₃ + Na₂CO₃ → Ag₂CO₃ + 2NaNO₃
We determine the moles of sodium carbonate:
0.3572 g . 1mol / 105.98g = 3.37×10⁻³ moles
Ratio is 1:2. We say:
1 mol of sodium carbonate react to 2 moles of silver nitrate
Then, our 3.37×10⁻³ moles of carbonate may react to: 3.37×10⁻³ . 2
= 6.74×10⁻³ moles
If we convert to mmoles → 6.74×10⁻³ mol . 1000 mmol / mol = 6.74 mmol
Molarity is mol/L but we can use mmol /mL
6.74 mol / volume in mL = 0.07216 M
6.74 mol / 0.07216 M = volume in mL → 93.4 mL
explain the trend in boling point of alcohols in their homologous series
Explanation:
The boiling point of alcohols also increase as the length of hydrocarbon chain increases
The boiling point of alcohols also increase as the length of hydrocarbon chain increases.
Why boiling points of alcohols increases as the length of hydrocarbon chain increasesSince, boiling point depends upon type of bonds present in the molecules.If molecules have hydrogen bonding then boiling point is higher than others because hydrogen bond is stronger bond.So, higher energy or temperature required to break these bond or overcomes the inter molecular force of attraction.Since, alcohol contains hydrogen bonding. So, its boiling points are higher as compare to other compounds.Since, boiling points is also directly proportional to molar mass of molecules. So, molecule have higher molar mass has comparatively high boiling point.Example: An alcohols with lower hydrocarbon chain has lower boiling points as compare to alcohols with higher hydrocarbon chain.To learn more about alcohols,
https://brainly.com/question/4698220
#SPJ2
(1 point) Which compound produces the greatest number of ions when one mole of it is dissolved in water
The question is incomplete, the complete question is;
Which produces the greatest number of ions when one mole dissolves in water? a. NaCl b. NH4Cl c. NH4NO3 d. Na2SO4
Answer:
Na2SO4
Explanation:
If we consider the compounds listed in the options one after the other;
NaCl produces two moles of ions in solution
NH4Cl produces two moles of ions in solution
NH4NO3 produces two moles of ions in solution
Na2SO4 produces three moles of ions in solution
We can see that Na2SO4 produces the greatest number of ions when one mole of the substance is dissolved in water, hence the answer above.
I dont understand this
Answer:
me too
Explanation:
Im stuck on these two questions anyone have the right answer?
WILL GIVE BRAINLIEST TO FIRST ANSWER
picture ⬆️
Answer: A Molecular Approach, 2/e. Mole ratio. 2 mol C4H10 : 13 mol O2 : 8 mol CO2 : 10 mol H2O. ❖ 2 molecules of C4H10 react ... of aluminum and 73.15 g of sulfur are combined to form aluminum sulfide according to the equation:.
Explanation:
Which of the following is the correct set up AND answer to convert 6.25 x
1032 atoms of Copper to grams of Copper?
Answer:
Explanation:
How many mols do you have?
1 mol = 6.02 * 10^23 atoms
x mol = 6.25 * 10 ^32 atoms
1/x = 6.02*10^23 / 6.25 * 10^32 Cross multiply
6.02 * 10^23 * x = 1 * 6.25 * 10^32 Divide by 6.02 * 10^23
x = 6.25 * 10*32/ 6.02 ^10^23
x = 1.038 * 10^9 mols which is quite large.
Find the number of grams. (Use the value for copper on your periodic table. I will just use an approximate number.)\
1 mol of copper = 63 grams.
1.038 * 10^9 mols of copper = x
1/1.038 * 10^9 = 63/x Cross multiply
x = 1.038 * 10^9 * 63
x = 6.54 * 10^10 grams of copper.
If atoms are electrically neutral then how do they form bonds?
Answer:
The nucleus contains neutrons and protons; protons carry the positive charge. The shells contain electrons which carry the negative charge. So, how can the atom be changed. ... Covalent bonds are electrically neutral because they are not formed due to the transfer of electrons but sharing of electrons.Explanation:
Hope it helps ^-^
#CarryOnLearning
Answer:
When an atom has an equal number of electrons and protons, it has an equal number of negative electric charges (the electrons) and positive electric charges (the protons). The total electric charge of the atom is therefore zero and the atom is said to be neutral. ... Chemically, we say that the atoms have formed bonds
if you were conducting an experiment with pepsin which has an optimal enzymatic actigity at ph 2.3, wat buffer would be the best choice
Answer: One with a pKa of 1.9
Hope this helps <3
P.S Fun Fact~~
There are only two words in the English language that have all five vowels in order: "abstemious" and "facetious."!
Answer:
Explanation: Is there choises? H3PO4 / NaH2PO4 buffer with equal concentrations would form a buffer solution pH = 2.15
Now we need to find the amount of NF3 that can be formed by the complete reactions of each of the reactants. If all of the N2 was used up in the reaction, how many moles of NF3 would be produced
The question is incomplete, the complete question is:
Nitrogen and fluorine react to form nitrogen fluoride according to the chemical equation:
[tex]N_2(g)+3F_2(g)\rightarrow 2NF_3(g)[/tex]
A sample contains 19.3 g of [tex]N_2[/tex] is reacted with 19.3 g of [tex]F_2[/tex]. Now we need to find the amount of [tex]NF_3[/tex] that can be formed by the complete reactions of each of the reactants.
If all of the [tex]N_2[/tex] was used up in the reaction, how many moles of [tex]NF_3[/tex] would be produced?
Answer: 1.378 moles of [tex]NF_3[/tex] are produced in the reaction.
Explanation:
The number of moles is defined as the ratio of the mass of a substance to its molar mass.
[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text{Molar mass}}[/tex] ......(1)
Limiting reagent is defined as the reagent which is completely consumed in the reaction and limits the formation of the product.
Excess reagent is defined as the reagent which is left behind after the completion of the reaction.
In the given chemical reaction, [tex]N_2[/tex] is considered as a limiting reagent because it limits the formation of the product and it was completely consumed in the reaction.
We are given:
Mass of [tex]N_2[/tex] = 19.3 g
Molar mass of [tex]N_2[/tex] = 28.02 g/mol
Putting values in equation 1:
[tex]\text{Moles of }N_2=\frac{19.3g}{28.02g/mol}=0.689mol[/tex]
For the given chemical reaction:
[tex]N_2(g)+3F_2(g)\rightarrow 2NF_3(g)[/tex]
By the stoichiometry of the reaction:
1 mole of [tex]N_2[/tex] produces 2 moles of [tex]NF_3[/tex]
So, 0.689 moles of [tex]N_2[/tex] will produce = [tex]\frac{2}{1}\times 0.689=1.378mol[/tex] of [tex]NF_3[/tex]
Hence, 1.378 moles of [tex]NF_3[/tex] are produced in the reaction.
Silver nitrate, AgNO3, reacts with ferric chloride, FeCl3, to give silver chloride, AgCl, and ferric nitrate, Fe(NO3)3. In a particular experiment, it was planned to mix a solution containing 25.0 g of AgNO3 with another solution containing 45.0 grams of FeCl3. Write the chemical equation for the reaction.
Answer:
[tex]\mathbf{FeCl_3 + AgNO_3 \to 3 AgCl+Fe(NO_3)_3}[/tex]
Explanation:
From the given question,
The chemical equation is:
[tex]\mathbf{FeCl_3 + AgNO_3 \to 3 AgCl+Fe(NO_3)_3}[/tex]
We are given that:
mass of [tex]FeCl_3[/tex] = 45 g
number of moles of [tex]FeCl_3[/tex] = 45 g/162.2 g/mol
= 0.28 mol
mass of [tex]AgNO_3[/tex] = 25g
number of moles of [tex]AgNO_3[/tex] = 25/169.87
= 0.147 mol
From the given equation 1 mole of [tex]FeCl_3[/tex] is required to make 3 mole of [tex]AgNO_3[/tex]
0.28 mole of [tex]FeCl_3[/tex] = 0.28 × 3 = 0.84 mol of [tex]AgNO_3[/tex]
Here [tex]AgNO_3[/tex] is the limiting reagent.
Thus,
3 mole of [tex]AgNO_3[/tex] = 3 moles of AgCl
0.147 mole of [tex]AgNO_3[/tex] = 0.147 mole of AgCl produced.
why the environment in most communities continue to be dirty 2×8
8. What was the original concentration in the BHL sample, if the dilution is 1:500 and the concentration 0.07 mg/ml
Answer:
The original concentration is "35 mg/ml".
Explanation:
According to the question,
The solution is diluted,
= 1:50
The initial volume,
V1 = 1 ml
Final concentration,
= 0.07 mg
then,
The final volume,
V2 = 500 ml
As we know,
⇒ [tex]V_1N_1=V_2N_2[/tex]
or,
⇒ [tex]N_1=\frac{V_2N_2}{V_1}[/tex]
On substituting the values, we get
⇒ [tex]=\frac{500\times 0.07}{1}[/tex]
⇒ [tex]=\frac{35}{1}[/tex]
⇒ [tex]=35 \ mg/ml[/tex]
A 0.07 mg/mL BHL solution was prepared by performing a 1:500 dilution on a 35 mg/mL solution.
A 1:500 dilution was carried out to prepare a 0.07 mg/mL BHL solution. We can find the concentration of the initial solution using the dilution rule.
What is the dilution rule?It is an equation that relates the concentration and volume of a concentrated and a dilute solution. The mathematical expression is:
C₁ × V₁ = C₂ × V₂
where,
C₁ is the concentration of the concentrated solution.V₁ is the volume of the concentrated solution.C₂ is the concentration of the dilute solution.V₂ is the volume of the dilute solution.C₁ = C₂ × (V₂/V₁)
C₁ = 0.07 mg/mL × (500/1) = 35 mg/mL
A 0.07 mg/mL BHL solution was prepared by performing a 1:500 dilution on a 35 mg/mL solution.
Learn more about dilution here: https://brainly.com/question/1615979
Predict the effect of an eightfold pressUre increase on the equillbrium composition of the reaction 3 Nalg) + H2lg) 2 NaHlg)
Answer:
See explanation
Explanation:
Given the reaction;
3N2(g) + H2(g) = 2N3H(g).
We know that when a constraint is imposed on a reaction system in equilibrium, the equilibrium position will shift in such a way as to annul the constraint.
In this case, when the pressure is increased eightfold, the equilibrium position will shift towards the direction where there is the least total volumes.
In this particular reaction, the forward reaction has the least total volumes and is favoured by an eightfold increase in pressure.
Hence, when the pressure is increased eightfold, more N3H(g) is obtained.
How many moles are 2.60 * 10 ^ 27 atoms of Silicon?
Answer:
~4,317.5 moles of Silicon
Explanation:
Using Avogadro's contant we know that:
1mole = 6.022 x 10^23 atoms
So,to calculate the number of moles in 2.60 x 10^27 atoms of Silicon:
=(2.60 x 10^27 x 1)/(6.022 x 10^23)
~4,317.5 moles of Silicon
Hope it helps:)