The frame of reference of a witness watching a gunfight from the other side of the street would be an inertial frame of reference.
An inertial frame of reference is a frame of reference where, excluding external forces, a body in motion maintains a constant speed in a straight line, and a body at rest remains at rest. In this instance, the witness is stationary in relation to the street and is not speeding up while watching the gunfight. As a result, the witness's frame of reference can be regarded as inertial.
It is important to remember that the witness's frame of reference would not be inertial if they were moving or speeding up while watching the gunfight, and they would have to account for this when doing so.
To learn more about Inertial frames:
https://brainly.in/question/4750039
which would be the most efficient manner in which to lift a heavy box? turn side to box and lift with one arm grasp box at arms length place one hand under box and one hand on top at arms length face box with elbows bent and arms close to body
The most efficient manner in which to lift a heavy box is to face the box with elbows bent and arms close to the body.
What is efficiency? Efficiency is the ratio of useful work done by a device to the total energy expended or heat consumed. Efficiency is a measure of the effectiveness with which a device does work.
In order to lift a heavy box, a certain posture must be maintained. Following is the correct way to lift a heavy box:
Face the box with elbows bent and arms close to the body.
Lifting a heavy box with proper posture is important for preventing injury. To lift a heavy box with proper posture, stand as close as possible to the box, feet hip-width apart, and squat down by bending the hips and knees. Once the arms are securely wrapped around the box, use the legs to lift the box off the ground, keeping the back straight and the box as close to the body as possible. This posture prevents the back from rounding, which can cause spinal injuries, and it also enables the arms and legs to work together, distributing the weight of the box more evenly. This posture is the most effective way to lift a heavy box, and it is essential to follow it to avoid injury.
To learn more about force refer to: brainly.com/question/12970081
#SPJ11
What will be the total intensity j of all standard candles integrated over all redshifts? explain why the night sky is of finite brightness even in universes with w ⤠â1/3, which have an infinite horizon distance?
Answer:
b
Explanation:
ik
A heart dysfunction that can cause death is ventricular fibrillation. This is an uncoordinated quivering of the heart as opposed to regular beating. An electric shock to the chest can cause momentary paralysis of the heart muscle, after which the heart will sometimes start organized beating again. A defibrillator is a device that applies a strong electric shock to the chest over a time of a few milliseconds. The device contains a capacitor of several microfarads, charged to several thousand volts. Electrodes called paddles, about 8 cm across and coated with conducting paste, are held against the chest on both sides of the heart, their handles are insulated to prevent injury to the operator, who calls clear and pushes a button on one paddle to discharge the capacitor through the patients chest.
assume that the capacitor in the defibrillator is 10 uF and is charged to 5,000 volts.
a. how much charge is stored in the capacitor before it is discharged?
b. how much energy is released when the capacitor is discharged?
c. if the capacitor completely discharges in 2.5 ms, what is the average current delivered by the defibrillator?
d. what is the average power delivered?
The correct answer to all questions about the defibrillator are: a) Q= 50 μC b) E= 125J c) I= 20A d) P= 50kW
A defibrillator is a device that is used to apply a strong electric shock to the chest in order to restart the heart in case of ventricular fibrillation.
The device contains a capacitor that is charged to a certain voltage and is then discharged through the patient's chest using electrodes called paddles.
a. The charge stored in the capacitor before it is discharged can be calculated using the formula Q = C * V, where Q is the charge in coulombs, C is the capacitance in farads, and V is the voltage in volts.
In this case, the capacitance is 10 μF or 10 * 10^-6 F, and the voltage is 5,000 V. Therefore, the charge stored in the capacitor is:
Q = 10 * 10^-6 F * 5,000 V = 50 * 10^-3 C = 50 μC
b. The energy released when the capacitor is discharged can be calculated using the formula E = 1/2 * C * V^2, where E is the energy in joules, C is the capacitance in farads, and V is the voltage in volts.
In this case, the capacitance is 10 uF or 10 * 10^-6 F, and the voltage is 5,000 V. Therefore, the energy released is:
E = 1/2 * 10 * 10^-6 F * (5,000 V)^2 = 125 J
c. The average current delivered by the defibrillator can be calculated using the formula I = Q / t, where I is the current in amperes, Q is the charge in coulombs, and t is the time in seconds.
In this case, the charge is 50 μC or 50 * 10^-3 C, and the time is 2.5 μs or 2.5 * 10^-3 s. Therefore, the average current delivered is:
I = 50 * 10^-3 C / 2.5 * 10^-3 s = 20 A
d. The average power delivered by the defibrillator can be calculated using the formula P = E / t, where P is the power in watts, E is the energy in joules, and t is the time in seconds.
In this case, the energy is 125 J, and the time is 2.5 μs or 2.5 * 10^-3 s. Therefore, the average power delivered is:
P = 125 J / 2.5 * 10^-3 s = 50,000 W or 50 kW
To know more about defibrillator, refer here:
https://brainly.com/question/30434883#
#SPJ11
The moment magnitude scale is a scale that rates earthquakes by estimating the total energy released by an earthquake . Estimating the total amount of energy released, enables comparison of earthquakes more accurately. It measures only small earthquakes.
It uses data collected by a seismograph.
It shows only the strength of seismic waves that were produced.
It determines the amount of damage caused by an earthquake.
The total amount of energy released, enables comparison of earthquakes more accurately. Thus, b. It makes use of seismograph data.
How the moment magnitude scale rates earthquakes?
The moment magnitude scale rates earthquakes by estimating the total energy released by an earthquake, based on data collected by a seismograph. It takes into account several factors, including the size of the fault that ruptured, the amount of movement that occurred, and the strength of the rocks involved.
The resulting magnitude value indicates the relative size or strength of the earthquake, and allows for more accurate comparison of earthquakes of different sizes. It does not directly determine the amount of damage caused by an earthquake, but a larger magnitude earthquake is generally capable of causing more damage than a smaller magnitude earthquake.
To learn more about earthquakes, visit: https://brainly.com/question/2916685
#SPJ1
Krystal throws a rappelling rope at a speed of 10 m/s down a 50 m cliff. when will the rope hit the ground? use the drop-down to put the correct order to solve for when the rope will hit the ground. question 2 options: the rope will hit the ground in about 4.37 s.
The rope will hit the ground in about 4.37 seconds.
With the help of the kinematic equation, we can resolve this issue:
[tex]d = vit + 1/2at^2[/tex]
where:
d = 50 m (distance or height of the cliff)
vi = 10 m/s (initial velocity)
a = [tex]9.8 m/s^2[/tex] (acceleration due to gravity, pointing downwards)
t = ? (time to hit the ground)
Solving for t:
[tex]50 = 10t + 1/2(9.8)t^2[/tex]
[tex]0 = 4.9t^2 + 10t - 50[/tex]
[tex]t = (-10+ \sqrt{(10^2 - 4(4.9)(-50))) / (2(4.9)} )[/tex]
[tex]t = 4.37 s[/tex]
Therefore, the rope will hit the ground in about 4.37 seconds.
for such more question on kinematic equation
https://brainly.com/question/24458315
#SPJ4
explain how a sand blaster can be used to clean surfaces such as concrete even though every grain of sand is very small and light
The combination of high velocity, kinetic energy, hardness, and irregularity of the sand particles make sand blasting an effective method for cleaning and preparing surfaces, including concrete.
How does the collective force of thousands of small and light grains of sand hitting a surface at high velocity create a powerful abrasive action that effectively removes dirt, grime, paint, rust, and other unwanted materials from the surface when using a sand blaster?
A sand blaster uses compressed air to force a stream of abrasive particles, such as sand, onto a surface to clean or prepare it for painting or other treatments.
Although each grain of sand is small and light, the collective force of thousands of grains of sand hitting the surface at high velocity creates a powerful abrasive action that can effectively remove dirt, grime, paint, rust, and other unwanted materials from the surface.
The sand particles have kinetic energy due to their high velocity, which allows them to physically abrade and remove the unwanted materials from the surface. Additionally, the sand particles are typically harder than the surface being cleaned, which allows them to scratch away the surface layer of the material and expose a fresh, clean layer underneath. This process is known as mechanical abrasion.
Moreover, the sand particles used in sand blasting are often of irregular shapes and sizes, which allows them to reach crevices and corners that may be difficult to clean with other methods.
To learn more about velocity follow the given link: https://brainly.com/question/20432894
#SPJ1
Drag each tile to the correct box.
Arrange the images in order to show how lake-effect snow occurs.
The images below demonstrate how lake effect snow occurs:
Cold Arctic air is passing over warm lake waters.
The surface of the lake adds heat and water vapour to the cold air mass.
Water vapour condenses in rising air to form clouds.
Snow blankets the lake and the downwind shore.
Where does lake effect snow most commonly occur?Lake effect snow most commonly occurs in the Great Lakes region of North America, which includes parts of the United States and Canada. The Great Lakes generate significant amounts of moisture, and when cold air passes over the relatively warm water, it picks up moisture and heat, leading to the formation of clouds and precipitation. As the air moves over land, it can release large amounts of snowfall in areas downwind of the lakes. This phenomenon is most common during the winter months and can produce heavy snowfalls that can impact transportation, infrastructure, and daily life in affected areas.
To know more about precipitation, visit:
https://brainly.com/question/18109776
#SPJ1
How does right-hand rule or F=BIL show the relationship between electricity and magnetism?
Electricity and magnetism are interrelated phenomena, and the right-hand rule provides a way to visualize the relationship between the two.
The right-hand rule (or F=BIL) is a mnemonic device used to show the relationship between electricity and magnetism in a current-carrying conductor. It is based on the observation that when a current-carrying conductor is placed in a magnetic field, a force is exerted on the conductor, causing it to move.
The right-hand rule states that if the thumb of the right hand points in the direction of the current, and the fingers of the right hand curl in the direction of the magnetic field, then the palm of the right hand will face in the direction of the force exerted on the conductor. This relationship is mathematically represented by the equation:
F = BIL
Where:
F is the force exerted on the conductor (newtons)
B is the strength of the magnetic field (teslas)
I is the current flowing through the conductor (amperes)
L is the length of the conductor in the magnetic field (meters)
This equation shows that the force exerted on the conductor is proportional to the strength of the magnetic field, the current flowing through the conductor, and the length of the conductor in the magnetic field.
This relationship between electricity and magnetism can be explained by the fact that an electric current creates a magnetic field around the conductor, and a magnetic field exerts a force on a current-carrying conductor. Therefore, electricity and magnetism are interrelated phenomena, and the right-hand rule provides a way to visualize the relationship between the two.
for such more question on magnetism
https://brainly.com/question/14997726
#SPJ4
a transformer on a pole near a factory steps the voltage down from 3600 v to 120 v. the transformer is to deliver 1000 kw to the factory at 90% efficiency. find (a) the power delivered to the primary, (b) the current in the primary, and (c) the current in the secondary.
A) The power delivered to the primary is 1111.1 kWB) The current in the primary is 308.6 A.C) The current in the secondary is 9258 A.
We can use the formula for power to solve this problem: Power = Voltage x Current x Efficiency, where efficiency is a decimal between 0 and 1.
(a) The power delivered to the primary can be found by dividing the power delivered to the secondary by the efficiency of the transformer:
Power_primary = Power_secondary / Efficiency
Power_secondary is the power delivered to the factory, which is 1000 kW.
Efficiency is given as 90%, or 0.9.
Power_primary = 1000 kW / 0.9 = 1111.1 kW
Therefore, the power delivered to the primary is 1111.1 kW.
(b) To find the current in the primary, we can use the formula for power again:
Power_primary = Voltage_primary x Current_primary
We know that the voltage on the primary side is 3600 V. Rearranging the formula, we get:
Current_primary = Power_primary / Voltage_primary
Current_primary = 1111.1 kW / 3600 V = 308.6 A
Therefore, the current in the primary is 308.6 A.
(c) To find the current in the secondary, we can use the turns ratio of the transformer:
Turns_ratio = Voltage_primary / Voltage_secondary
We know that the voltage on the secondary side is 120 V, and the turns ratio is:
Turns_ratio = 3600 V / 120 V = 30
The turns ratio tells us that the secondary voltage is 1/30th of the primary voltage, and the current on the secondary side is 30 times greater than the current on the primary side.
Therefore, the current in the secondary is:
Current_secondary = Current_primary x Turns_ratio
Current_secondary = 308.6 A x 30 = 9258 A
Therefore, the current in the secondary is 9258 A.
Learn more about power delivered here:
https://brainly.com/question/15044602
#SPJ11
Why is it not zero? How did they solve it
Answer:
The cone contains no charge.
Flux in = Flux out
Flux In = π R^2 E A = 471 N/C m^2
if the sun were to collapse into a black hole, the point of no return for an investigator would be approximately 3 km from the center singularity. would the investigator be able to survive visiting even 300 km from the center? answer this by finding the difference in the gravitational attraction the black holes exerts on a 1.0-kg mass at the head and at the feet of the investigator.
No, the investigator would not be able to survive visiting 300 km from the center of the collapsed sun. According to Newton's Law of Gravitation, the gravitational force experienced by a 1.0-kg mass is given by the equation F = GMm by r2, where G is the gravitational constant, M is the mass of the black hole, m is the mass of the investigator, and r is the distance between them.
If the investigator is at a distance of 3 km from the center, the force experienced by the 1.0-kg mass at their head is GMm by 32. If the investigator is at a distance of 300 km from the center, the force experienced by the 1.0-kg mass at their feet is GMm by 3002, which is much greater than the force experienced at the head. Thus, the difference in gravitational attraction experienced by the investigator is too great for them to survive at a distance of 300 km from the center.
Know more about Newton's Law of Gravitation
https://brainly.com/question/9373839
#SPJ11
Compilation of fashion accessories articles in the Philippines
HAMMER. It is utilized to fall to pieces of shisha material privately called (aluminum alloy) for simple liquefying. Forceps. It is a hand instrument commonly utilized for twisting and compacting many materials. Texture Paste, WOOLEN YARN, NEEDLE, SCISSORS, HAND Devices, AND Record Apparatuses.
In fashion, an accessory is a thing used to contribute, in an optional way, to a singular outfit. Accessories are much of the time decided to finish an outfit and supplement the wearer's look.[1] They have the ability to additional express a singular's character and character. Accessories come in various shapes, sizes, tones, and so on. The term came into utilization in the twentieth 100 years.
Fashion accessories can be inexactly ordered into two overall areas: those that are conveyed and those that are worn. Generally conveyed accessories incorporate totes and purses, hand fans, parasols and umbrellas, wallets, sticks, and stately blades. Accessories that are worn may incorporate coats, boots and shoes, cravats, ties, caps, hats, belts and suspenders, gloves, muffs, pieces of jewelry, wristbands, watches,[a] eyewear, bands, cloaks, scarves, cords, socks, pins, piercings, rings, and stockings.[1]
The kind of accessory that an individual decides to wear or convey to supplement their outfit is not entirely set in stone by a few elements, including the particular setting of where the individual is going. For instance, assuming an individual will work their decision of accessory would contrast from somebody who is going out to beverages or supper; along these lines relying upon work or play various accessories would be picked. Likewise, a person's conservative status, the strict and social foundation would likewise be a contributing component
to know more about alloy click here:
https://brainly.com/question/1759694
#SPJ4
the complete question is:
what is the Compilation of fashion accessories articles in the Philippines?
These articles discuss a range of issues regarding fashion accessories in the Philippines, such as up-and-coming accessory firms, sustainable fashion, traditional accessories, and styling advice. Individuals with an interest in Filipino fashion, provide knowledge and inspiration.
The fashion accessories industry in the Philippines is vibrant and diverse. These articles provide valuable insights into various aspects of the industry. From emerging accessory brands and local designers making waves globally to sustainable and traditional accessories, there is something for everyone. Style tips and practical advice are also available for those looking to elevate their accessorizing game. The beauty and craftsmanship of locally-made accessories are celebrated, and options for budget-conscious shoppers are provided. These articles showcase the richness and diversity of the Philippine fashion scene and its contribution to the global fashion industry.
learn more about fashion accessories here:
https://brainly.com/question/30809653
#SPJ4
I runner makes one lap around a 1,765m
track an average speed of 441.25 meters a day
How long did it take him?
Answer:
To find the time, we can use the formula:
time = distance ÷ speed
In this case, the distance is 1,765 meters and the speed is 441.25 meters per minute (not per day, as stated in the question). We need to convert the speed to minutes per lap:
441.25 meters/min = 7.3542 meters/sec
1 lap = 1765 meters
Now we can calculate the time:
time = 1765 meters ÷ 7.3542 meters/sec
time ≈ 240.11 seconds
Therefore, it took the runner approximately 240.11 seconds, or 4 minutes and 0.11 seconds, to complete one lap around the track at an average speed of 441.25 meters per minute.
Explanation:
The wheel of an automobile has a radius of 30.0 cm and an axle radius of 10.0 cm. What is its ideal mechanical advantage?
Therefore, the ideal mechanical advantage of the wheel and axle system in this automobile is 3.
What is force?In physics, force is defined as any influence that causes an object to undergo a change in motion, either by changing its speed, direction, or shape. It is a vector quantity, meaning that it has both magnitude (a numerical value) and direction. Forces can be classified into different types, including contact forces (such as friction, tension, and normal forces) and non-contact forces (such as gravitational, electric, and magnetic forces). The net force acting on an object determines its acceleration, which is described by Newton's second law of motion: F = ma, where F is the net force, m is the mass of the object, and a is the acceleration.
Here,
The ideal mechanical advantage (IMA) of a wheel and axle system can be calculated using the following formula:
IMA = radius of wheel / radius of axle
In this case, the radius of the wheel is 30.0 cm and the radius of the axle is 10.0 cm. Substituting these values into the formula, we get:
IMA = 30.0 cm / 10.0 cm = 3
To know more about force,
https://brainly.com/question/29044739
#SPJ1
4. You throw a m = 128 g ball up into the air at an initial velocity v₁ = 4.8 m/s. How high, h, does the ball reach before slowing down to vi = 2.4 m/s?
The ball will reach a height of 1.17 meters before slowing down to Vi = 2.4 m/s
Kinematic motion problemFirst, we can use the equation for the final velocity of an object under constant acceleration:
v_f^2 = v_i^2 + 2ah
where v_f is the final velocity, v_i is the initial velocity, a is the acceleration, h is the height reached by the ball, and we assume that the acceleration due to gravity is -9.8 m/s^2 (negative because it acts downwards).When the ball is thrown upwards, it experiences a constant downward acceleration due to gravity, so we can take a = -9.8 m/s^2.
At the maximum height, the final velocity of the ball will be zero, so we can set v_f = 0 and solve for h:
0 = (4.8 m/s)^2 + 2(-9.8 m/s^2)h
h = [(4.8 m/s)^2]/[2(9.8 m/s^2)] = 1.17 m
So the ball reaches a maximum height of 1.17 meters.
Next, we can use the same equation with v_i = 2.4 m/s and v_f = 0 to find the height where the ball reaches a velocity of 2.4 m/s on its way down:
0 = (2.4 m/s)^2 + 2(-9.8 m/s^2)h
h = [(2.4 m/s)^2]/[2(9.8 m/s^2)] = 0.29 m
Therefore, the ball reaches a maximum height of 1.17 meters and then falls to a height of 0.29 meters before reaching a velocity of 2.4 m/s.
More on kinematic motion can be found here: https://brainly.com/question/13671823
#SPJ1
Which one of the following statements concerning electrostatic situations is false?A. No work is required to move a charge along an equipotential surface. B. If the electric potential with a region of space is zero volts, the electric field within that region must also be zero V/m. C. The electric field is never perpendicular to equipotential surfaces. D. The electric field is zero V/m everywhere inside a conductor
The correct option is C, the following statements concerning electrostatic situations is false of The electric field is never perpendicular to equipotential surfaces.
Equipotential surfaces are imaginary surfaces in space where every point on the surface has the same electrical potential or voltage. In other words, these surfaces represent points in space where the electric potential is constant.
Equipotential surfaces are important in the study of electric fields because the direction of the electric field is always perpendicular to the equipotential surfaces. This means that the electric field lines must cross the equipotential surfaces at right angles. The spacing between equipotential surfaces also gives an indication of the strength of the electric field - the closer the surfaces, the stronger the field. The electric field created by the charge will have a certain strength and direction at every point in space.
To learn more about Equipotential surfaces visit here:
brainly.com/question/14908372
#SPJ4
you want to make a flashlight using a small bright bulb and a concave spherical mirror. where should you place the light bulb so that the flashlight's beam is as narrow and bright as possible?
The light bulb should be placed at the focal point of the mirror so that the flashlight's beam is as narrow and bright as possible.
A concave spherical mirror has a curved surface that curves inward, so that it is thinner at the center than at the edges. Light that reflects off a concave spherical mirror is reflected inward towards the focal point of the mirror.
The distance from the mirror to the focal point is called the focal length, which depends on the curvature of the mirror.
When you place the light bulb at the focal point of the mirror, the light rays from the bulb will reflect off the mirror and emerge from the mirror parallel to each other, producing a narrow beam of light. This is because light rays that are parallel to the axis of the mirror are reflected through the focal point.
The beam will also be bright because all the light from the bulb is directed into a narrow beam.
Therefore, to make a flashlight with a narrow and bright beam, you should place the small bright bulb at the focal point of the concave spherical mirror.
To learn more about the 'focal point':
https://brainly.com/question/12653475
#SPJ11
any help will be appreciated!!
The question of why individuals act certain ways has always been of interest to psychologists. Several perspectives have provided different explanations for this question. Describe the primary area of interest for explaining and justifying behavior and the key figures (people) identified for each of the following psychological perspectives.
Psychodynamic:
Behavioral:
Humanistic:
Cognitive:
Answer:
The question of why individuals act in certain ways has been of interest to psychologists for a long time, and different perspectives have provided various explanations for this question. Below is a brief description of the primary area of interest for explaining and justifying behavior, along with the key figures associated with each of the following psychological perspectives:
Psychodynamic Perspective: The psychodynamic perspective emphasizes the role of unconscious thoughts, feelings, and memories in shaping behavior. The primary area of interest in this perspective is understanding the unconscious conflicts and repressed emotions that influence behavior. The key figures associated with this perspective are Sigmund Freud and his followers.
Behavioral Perspective: The behavioral perspective emphasizes the role of environmental factors in shaping behavior. The primary area of interest in this perspective is the understanding of how external stimuli, rewards, and punishments can shape behavior. The key figures associated with this perspective are Ivan Pavlov, B.F. Skinner, and John B. Watson.
Humanistic Perspective: The humanistic perspective emphasizes the role of personal growth, choice, and free will in shaping behavior. The primary area of interest in this perspective is the understanding of how individuals can fulfill their potential and achieve self-actualization. The key figures associated with this perspective are Abraham Maslow and Carl Rogers.
Cognitive Perspective: The cognitive perspective emphasizes the role of mental processes, such as perception, memory, and thought, in shaping behavior. The primary area of interest in this perspective is the understanding of how individuals process information and make decisions. The key figures associated with this perspective are Jean Piaget, Aaron Beck, and Albert Ellis.
Explanation:
a. Two charged parallel plates are 4.0 cm apart and have a uniform electric field of 750 V /m between them. What is the potential difference between the plates?
b. How much work is necessary to move a +7.0 mC charge from the positive plate to the negative plate!
Answer:
a. The potential difference between two parallel charged plates can be calculated using the formula V = Ed, where V is the potential difference, E is the electric field strength between the plates, and d is the distance between the plates. In this case, the distance between the plates is 4.0 cm or 0.04 m and the electric field strength is 750 V/m. Plugging these values into the formula gives V = 750 V/m * 0.04 m = 30 V. So, the potential difference between the two parallel charged plates is 30 V.
b. The work done to move a charge between two points in an electric field can be calculated using the formula W = qV, where W is the work done, q is the charge being moved, and V is the potential difference between the two points. In this case, the charge being moved is +7.0 mC or 0.007 C and the potential difference between the positive and negative plates is 30 V (calculated in part a). Plugging these values into the formula gives W = 0.007 C * 30 V = 0.21 J. So, it would take 0.21 joules of work to move a +7.0 mC charge from the positive plate to the negative plate.
Respond to the following based on your reading.
How does the valence of an element relate to its chemical activity?
Identify the statements below as belonging to one of these laws: law of conservation of matter, law of conversation of energy, or law of definite proportions.
Energy can be neither created nor destroyed by chemical means but can be changed from one form to another.
The composition of a chemical compound never varies.
Matter can be neither created nor destroyed by chemical means but can be changed from one form to another.
How was the Periodic Table of Elements developed and how are the elements arranged on it?
Using the Periodic Table of Elements, fill in the chart below to identify and describe the properties of the noble gases.
Element Name Group Number Period Number Valence Properties/Reactivity Uses
Using the Periodic Table of Elements, fill in the chart below to identify and describe the properties of the halogens.
Element Name Group Number Period Number Valence Properties/Reactivity Uses
Using the Periodic Table of Elements, fill in the chart below to identify and describe the properties of the nonmetals.
Element Name Group Number Period Number Valence Properties/Reactivity Uses
Describe the unique properties of water. Be sure to include an explanation of the filtration systems we use to keep water safe for drinking.
What is the Earth’s atmosphere composed of, and why is it important?
The gases that make up the planet's atmosphere are mixed together.Nitrogen, oxygen, & carbon dioxide are among the atmospheric gases.The water cycle & weather depend on the atmosphere, which also sustains life.
Why is it crucial to us in Class 7?The atmosphere of the earth shields its people by absorbing dangerous sun rays and preserving a constant temperature.It protects Earth from many space hazards and enables life there.As a result, it is crucial for regulating climate and a source of life on planet.
What elements make up the atmosphere on Earth?Approximately 78% of the air of Earth's atmosphere is nitrogen, while 21% is oxygen.In trace proportions, additional gases like carbon dioxide, neon, & hydrogen are also present in air.
To know more about planet's atmosphere visit:
https://brainly.com/question/28871259
#SPJ1
Answer:
1. The number of valence electrons that an atom has dictates its ability to react chemically. The closer an atom is to achieving a full outermost shell, the more likely it will be to borrow electrons. Atoms are paired in a way that allows both to achieve a full stable outermost shell. For example, one atom of silicon has 14 electrons, four of which are valence electrons in the outermost shell. Silicon can lend, share, or gain four electrons to achieve a full outermost shell.
2.
a. Law of conservation of energy
b. Law of definite proportions
c. Law of conservation of matter
3. Mendeleev first published a table of elements arranged according to increasing atomic masses. He noticed that some elements near each other had differing properties, but elements in vertical columns had similar properties. Moseley then rearranged the table according to atomic numbers and this eliminated the discrepancies found in Mendeleev’s attempt. Today’s version of the periodic table displays elements in order based on their atomic number; the atomic number indicates the number of protons within the atoms of a particular element. Rows are called periods and columns are called groups. Elements in the same group have similar properties. Elements are grouped into nine categories: noble gases, halogens, nonmetals, alkali metals, alkaline earth metals, transition metals, other metals, metalloids, and rare earth elements.
( VIEW ATTACHMENT FOR 4, 5, AND 6.)
7. Water is colorless, odorless, and tasteless. It's the chief substance of living material. It has a specific gravity of 1.0 at 4° Celsius. It freezes at 0° Celsius and boils at 100° Celsius. Water is a powerful solvent. Distillation is needed to remove impurities. Purification methods include
Aeration (water is sprayed into the air so that light and oxygen can kill bacteria)
Filtration (water is passed through a filter to remove impurities)
Chlorination (chlorine is added to water to destroy bacteria)
Coagulation (chemicals are added to water to cause organic matter with bacteria to settle out)
8. Air contains nitrogen (78%), oxygen (21%), carbon dioxide (0.04%), and rare gases (less than 1%). It also contains water, dust, bacteria, and other materials.
The atmosphere supports life via two cycles. In the carbon dioxide cycle, carbon dioxide is taken in by plants and used in photosynthesis. From here, oxygen is released to the atmosphere and taken in by animals; it fuels combustion and is needed for fermentation and decay. These processes convert it back to carbon dioxide.
In the nitrogen cycle, nitrogen is fixed by bacteria in the soil into usable nitrogen compounds absorbed by plants. Plants use these to form proteins, which are used as food by animals. Decaying plants and animal wastes return the nitrogen to the soil and ammonia to air. Without atmospheric nitrogen, rust and decay of living material would happen more quickly.
According to the table, these four models all represent molecules. One model is composed of two atoms of the same element. That is model.
ANSWER ASAP PLS
According to the question, each molecular model in the possibilities has spheres of varying colors and sizes that represent various sorts of atoms.
What is a molecule made up of atoms of two or more distinct elements?A compound is a material composed of atoms or ions of two or more distinct elements linked by chemical bonds to form a molecule.
A molecule is composed of one or more atoms. If they have more than one atom, the atoms can be the same (as in an oxygen molecule), or they can be distinct.
Atoms of the same element have the same color and size, but atoms of other elements do not.
learn more about molecules
https://brainly.com/question/475709
#SPJ1
callisto, the fourth moon of jupiter, takes 17 days to orbit jupiter. if you could stand on the surface of callisto and see jupiter high in the sky over my head, and then wait 8.5 earth days in the same spot, where would you see jupiter?
If you were standing on the surface of Callisto, Jupiter's fourth moon, and waited 8.5 Earth days in the same spot, you would see Jupiter in the same position in the sky. This is because Callisto takes 17 days to complete an orbit of Jupiter, and 8.5 days are half of 17 days.
The time it takes Callisto to complete one orbit of Jupiter is 17 days. If a person were standing on the surface of Callisto and saw Jupiter high in the sky above their head, they would observe Jupiter moves during a period of 8.5 Earth days. Here's where they would see Jupiter at the end of the waiting period: Jupiter would appear to have moved to the opposite side of Callisto. The reason for this is that Jupiter's position in the sky depends on the planet's relative location in its orbit around the Sun, as well as the position of the observer. As Callisto orbits Jupiter, the location of Jupiter in the sky over Callisto would change.Learn more about Callisto: https://brainly.com/question/30464364
#SPJ11
9. Kinetic molecular theory postulates are written for ideal gas behavior. In reality, gases to not behave ideally. For example, water molecules are polar and create surface tension through hydrogen bonds, even in vapor form. This explains why clouds are formed. Which postulate of the kinetic molecular theory is untrue for the formation of clouds?
The frequency of wall contacts and thus the pressure of the gas increase as the number of gas particles in the container rises.
How does the kinetic theory of molecules explain how ideal gas molecules behave?The kinetic molecular theory of gases explains how ideal gases behave. Pressure is explained by molecular motion, which causes collisions between molecules and the container walls. Gases' great compressibility is explained by the enormous intermolecular distances between their molecules.
Which kinetic molecular theory postulate explains the fact that a gas's pressure rises as its temperature does?Charles' rule. Only by increasing the volume the gas occupies can a steady pressure be maintained while the temperature of the gas rises.
To know more about frequency visit:-
brainly.com/question/3795295
#SPJ1
o dramatize the loss of energy in an automobile, consider a car having a weight of 5000 lb that is traveling at 35 mi>h. if the car is brought to a stop, determine how long a 100-w light bulb must burn to expend the same amount of energy. (1 mi
The light bulb must burn for approximately 46.2 minutes to use the same amount of energy as the car lost during its deceleration.
Consider a 5,000-pound vehicle at 35 mph to illustrate energy loss in an automobile. When the automobile stops, its kinetic energy is transformed into heat and sound, resulting in a large energy loss. We use a 100-Watt light bulb to understand this loss.
The car's initial kinetic energy is [tex]KE = 0.5 * mass * velocity^2[/tex]. Next, we calculate 100-Watt light bulb energy usage per second. Finally, we divide the automobile's kinetic energy by the light bulb's energy consumption per second to determine the time needed for the light bulb to use the same amount of energy as the car.
The light bulb must burn for 46.2 minutes to utilise as much energy as the automobile lost during deceleration. This striking depiction illustrates the significant energy waste required in halting a moving automobile and emphasises energy conservation and efficient transportation systems.
Learn more about energy, here:
https://brainly.com/question/32906147
#SPJ12
car wheel of radius 0.25 m has a linear acceleration of 1.75 m/s2
. Calculate the
angular acceleration of wheel.
The angular acceleration of the car wheel is 7.0 rad/s².
How to calculate angular acceleration?We can relate the linear acceleration a and the angular acceleration α of a rotating object through the equation:
a = rα
where r is the radius of the rotating object. In this case, the radius of the car wheel is 0.25 m and the linear acceleration is 1.75 m/s². Substituting these values into the equation:
1.75 m/s² = (0.25 m) α
Solving for α:
α = 1.75 m/s² / 0.25 m = 7.0 rad/s²
Therefore, the angular acceleration of the car wheel is 7.0 rad/s².
Learn more on angular acceleration here:
#SPJ1
Four compasses are placed around a wire, as shown.
A long wire that is vertical and standing on a steel plate. There are 4 compasses surrounding it and all of the needles are pointing in the same direction, west.
The wire is then connected to a battery so that a current flows down the wire.
How will the compasses point once the current is flowing?
A long wire that is vertical and standing on a steel plate. There are 4 compasses surrounding it and all of the needles are pointing in the same direction, west.
A long wire that is vertical and standing on a steel plate. There are 4 compasses surrounding it and all of the needles are pointing in the same direction, east.
A long wire that is vertical and standing on a steel plate. There are 4 compasses surrounding it and all of the needles are pointing clockwise.
A long wire that is vertical and standing on a steel plate. There are 4 compasses surrounding it and all of the needles are pointing counterclockwise.
Once the current is flowing the compass will show
A long wire that is vertical and standing on a steel plate. There are 4 compasses surrounding it and all of the needles are pointing clockwise
How to find how the compasses pointOnce the current is flowing through the wire, it will generate a magnetic field around it.
The magnetic field will interact with the Earth's magnetic field and cause the compass needles to deflect from their original westward orientation. The direction of deflection will depend on the direction of the current flow in the wire.
Using the right-hand rule, we can determine that the magnetic field around a wire carrying current in the downward direction will have a direction perpendicular to the wire and pointing clockwise when viewed from above. This means that the compass needles will deflect and start pointing in a clockwise direction.
Therefore, the answer is: "A long wire that is vertical and standing on a steel plate. There are 4 compasses surrounding it and all of the needles are pointing clockwise."
Learn more about current at:
https://brainly.com/question/20118982
#SPJ1
Answer:
It's the third one
Explanation:
C.
work of joules is done in stretching a spring from its natural length to 14 beyond its natural length. what is the force (in newtons) that holds the spring stretched at the same distance (14 )?
The force that holds the spring stretched at the same distance (14) is 25.76 N.
The work done in stretching a spring from its natural length to 14 beyond its natural length = W = 180 J
The stretch distance is = x = 14
Work done in stretching a spring = (1/2) k x² Where,
W = work done in stretching a spring
k = spring constant
x = distance stretched from its natural length
Therefore, the formula for finding the spring constant k is: k = (2W) / x²
From the given data, Work done = W = 180 J
Stretch distance = x = 14
Therefore, the spring constant k is: k = (2W) / x²= (2 × 180 J) / (14)²= (2 × 180) / 196= 360 / 196= 1.84 N/m
The force that holds the spring stretched at the same distance (14) is given by the formula: F = k x Where,
k = spring constant
x = stretch distance
Therefore, F = k x= 1.84 N/m × 14= 25.76 N
Therefore, the force that holds the spring stretched at the same distance (14) is 25.76 N.
To know about spring, refer here:
https://brainly.com/question/14670501#
#SPJ11
Which of the following is an example of acceleration?
O A. 15 m/s
OB. 25 m/s east
O C. 60 km/hr
OD. -2 m/s² west
Option D: -2 m/s² west is an example of acceleration.
What is the definition of acceleration?Acceleration is the rate of change of velocity with respect to time. It is a vector quantity and can be positive or negative depending on the direction of the change in velocity.
Why is option D an example of acceleration?Option D is an example of acceleration because it includes both the magnitude (-2 m/s²) and direction (west) of the change in velocity. The negative sign indicates that the velocity is decreasing, and the direction (west) indicates the direction of the change in velocity.
Learn more about acceleration here:
https://brainly.com/question/12550364
#SPJ1
2 bodies of equal masses are placed at heights h/2 & 2h respectively. Find the-ratio of their gravitational potential energy
The-ratio of their gravitational potential energy is [tex]1:2[/tex]. The unit of measurement for any and all types of energy, which would include kinetic and potential energy, is kilograms per square second, or kg*m2/s2 (J).
Height [tex]H_{1} = h[/tex]
Height [tex]F_{2} = 2h[/tex]
Mass of body 1 = m
Mass of body 2 = m
Gravitational potential energy of body [tex]1 = mgH 1 =mgh[/tex]
Gravitational potential energy of Body 2 [tex]= mgH 2 =mg(2h)[/tex].
Ratio of gravitational potential energies
[tex]=\frac{mgh}{mg (2h)} =\frac{mgh}{2mgh} =\frac{1}{2} = 1:2[/tex]
What Unit of Measurement Is Potential Energy in?
Due to the fact that energy and work quantify identical types of force, the Joule is indeed the proven scientific measurement device for either of those.
How do you calculate kinetic energy?
K E = 1 2 m v 2 is the formula for kinetic energy. When m denotes the body's weight as well as v denotes its velocity, KE stands for kinetic energy.
To know more about kinetic click here
brainly.com/question/26472013
#SPJ4
match the silicate structure with the appropriate mineral example. - independent tetrahedra e. single chain - double chain - sheet - network
Answer:
Independent tetrahedra: Olivine
Single chain: Pyroxene
Double chain: Amphibole
Sheet: Mica
Network: Feldspar
Minerals are naturally occurring substances that form when elements combine in a specific ratio and arrangement. Silicates are the most abundant minerals on Earth and are composed of silicon and oxygen. They are further classified by their structure and the arrangement of their oxygen and silicon atoms.
Independent tetrahedra have silicate tetrahedrons (SiO4) that are not connected. Olivine is an example of this, and is formed from magnesium and iron-rich silicates.
Single chain silicates are composed of linked tetrahedral, forming a single chain. Pyroxene is an example of this, with single chain silicates typically forming as a result of metamorphism or magmatic processes.
Double chain silicates are composed of two connected chains of silicate tetrahedrons. Amphibole is an example of this, and is found in many igneous and metamorphic rocks.
Sheet silicates have silicon and oxygen atoms that are linked in sheets. Mica is an example of this, and can form as a result of chemical weathering of larger silicates.
Network silicates are composed of many tetrahedrons that are linked together in a network. Feldspar is an example of this, and is the most abundant mineral in the Earth’s crust.
Know more about silicates here:
https://brainly.com/question/29560091
#SPJ11