Answer:
6.75 v
Explanation:
Two risks of exposure to High levels of UV radiation
Answer:
uv radiation cause cancer
uv radiation effect our eyes
Answer:
you can get
1:skin cancer
2:eye damage
3:skin damage
4:immune system suppression
choose which two u want
hope this helped
:)
Explanation:
An object’s
✔ mass
will remain constant throughout the universe, but its
can change from planet to planet.
If you increase the mass of a planet, what happens to its gravity?
If the gravity on a planet decreases, what happens to the weight of an object on that planet?
Answer:
mass, weight, strength of gravity increases, weight decreases
Explanation:
got it on edge
Answer:
An object’s
✔ mass
will remain constant throughout the universe, but its
✔ weight
can change from planet to planet.
If you increase the mass of a planet, what happens to its gravity?
✔ strength of gravity increases
If the gravity on a planet decreases, what happens to the weight of an object on that planet?
✔ weight decreases
Explanation:
right on edge 22
When antimatter interacts with an equal mass of ordinary matter, both matter and antimatter are converted completely into energy, in the form of photons. In an antimatter-fueled spaceship, a staple of science fiction, the newly created photons are shot from the back of the ship, propelling it forward. Suppose such a ship has a mass of 2.00×10^6kg, and carries a mass of fuel equal to 4% of its mass, or 4.00×10^4kg of matter and an equal mass of antimatter.
Required:
What is the final speed of the ship, assuming it starts from rest, if all energy released in the matter-antimatter annihilation is transformed into the kinetic energy of the ship?
Answer:
v = 5.88 10⁷ m / s
Explanation:
For this exercise we use the relation
E = m c²
also indicate that all energy is converted into kinetic energy
E = K = ½ (M-2m) v²
where m is the mass of antimatter and M is the mass of the ship's mass. Factor two is due to the fact that equal amounts of matter and antimatter must be combined
we substitute
m c² = ½ (M-2m) v²
v² = [tex]2 \frac{m}{M+2m} \ c^2[/tex]
let's calculate
v = [tex]\sqrt{2 \ \frac{4 \ 10^4 }{2 \ 10^6 + 2 \ 4 \ 10^4} \ (3 \ 10^8)^2}[/tex]
v = [tex]\sqrt{ 34.615 \ 10^{14}}[/tex]
v = 5.88 10⁷ m / s
The model shows the star Wolf 359, the sun, and Star X. It takes 7.8 years for light produced on Wolf 359 to reach the sun.
If Star X is 50 times as far from the sun as Wolf 359 is, how far is Star X from the sun, to the nearest light-year?
Answer:
390 light-years
Explanation:
50 x 7.8 =390
How much energy is supplied to a 9 V bulb if it is switched on for 3 minutes and takes a current of
0.2 A ?
Answer:
0.01j
Explanation:
the energy equals the work done by the bulb.
Workdone=
[tex]workdone = \frac{power}{time} [/tex]
power=voltage×current
=9×0.2
=1.8 W.
THEREFORE,
time=3×60
= 180s
workdone=1.8/180
=0.01 j
A whole set of birdfeeders are designed using conservation of Angular Momentum to spin when a squirrel jumps on them. This can throw the squirrel off (though not all squirrels give up that easily - see this video for an example). A bird, landing, doesn't cause the same problem. A squirrel, with a mass of 3.00 kg launches itself at the bird feeder with a velocity of 3.40 m/s. The bird feeder has a radius of 6.30 cm and a Moment of Inertia of 2.00 kg m2. Initially the bird feeder is not rotating at all, but starts rotating when the squirrel lands on the outer edge (at the same radius as described above). You can assume that the squirrel is small compared to the size of the bird feeder radius (not true in the video, but it does make this a bit easier for out calculations). What is the angular velocity of the bird feeder - squirrel system after the squirrel lands on it
Answer:
w = 0.319 rad / s
Explanation:
This is an angular momentum problem, let's form a system composed of the feeder and the squirrel, therefore the forces during the collision are internal and the angular momentum is conserved.
initial instant. Before the squirrel jumps
L₀ = m v r
final instant. After the trough and the squirrel are together
L_f = (I_fetter + I_ardilla) w
angular momentum is conserved
L₀ = L_f
m v r = (I_fetter + I_ardilla) w
w = [tex]\frac{mvr}{I_{fetter} + I_{ardilla} }[/tex]
the moment inercial ofbody is
I_thed = 2.00 kg m²
We approach the squirrel to a specific mass
I_ardilla = m r²
we substitute
w = m v r / ( I_[feefer + m r²)
let's calculate
w = 3 3.40 6.30 10⁻² / (2.00 + 3.00 (6.30 10-2)² )
w = 0.6426 / 2.0119
w = 0.319 rad / s
Suppose we have a vacuum with two metal plates separated by 2 meters. One of the plates has a hole in it so that a charged particle coming from the other one can pass through into empty space. ;The plate with a hole is attached to a voltage source of 5,000,000 V and electrons and muons are introduced near the other plate at 0 V. What energies and velocities do the electrons and muons have when they pass through the hole
Answer:
hello your question has a some missing information below is the missing information
An electron is one of the most fundamental particles in nature. It is everywhere, in all the matter we can see, and it is with electrons that light interacts when it is emitted, absorbed, or scattered in everyday matter. The electron has a more massive cousin called a muon, also with a charge of -1 e, but with a mass of 1.88x10-28 kg. The electron's mass is 9.11x10-31 kg. You can see why a muon is called a "heavy" electron. A muon is also unstable, and left alone at rest in a lab it will turn into an electron, kinetic energy, and two neutrinos with a lifetime of 2.20x10-6 s.
answer :
energy and velocity of Electron : 8*10^-13 J , < 3*10^8 m/s
energy and velocity of Muon : 8*10^-13 J, 9.22 * 10^7 m/s
Explanation:
Determine the energies and velocities of the electrons and Muons when they pass through the hole
i) energy of electron = q1 * V -- ( 1 )
V ( voltage ) = 5 * 10^6 V
q1 ( charge on electron ) = 1.6 * 10^-19 C
back to equation 1 ; energy of electron = ( 1.6 * 10^-19 ) * 5 * 10^6
= 8*10^-13 J
ii) velocity of electron = 1/2 * Me *( Ve)^2
1/2 * Me *( Ve)^2 = 8*10^-13
∴Ve = [tex]\sqrt{(8*10^{-13} )/(9.11*10^{-31} )}[/tex] < 3*10^8 m/s
iii) energy of muon
= Eu = q*v = 8*10^-13 J
iv ) velocity of Muon = [tex]\sqrt{(8*10^{-13} )/(1.88*10^{-28} )}[/tex] = 9.22 * 10^7 m/s
A right triangle has side lengths of 4 centimeters and 5 centimeters. What is the length of the hypotenuse?
O A. 3 cm
B. 4 cm
C. 5 cm
D. 41 cm
When two substances that cannot dissolve each other are mixed, a ________ mixture is formed
Answer: hetero i think i dont know
Explanation:
Answer:
When two substances that cannot dissolve each other are mixed, a mixture is formed.
i hope this helps a little bit.
Transverse thrusters are used to make large ships fully maneuverable at low speeds without tugboat assistance. A transverse thruster consists of a propeller mounted in a duct; the unit is then mounted below the waterline in the bow or stern of the ship. The duct runs completely across the ship. Calculate the thrust developed by a 1900 kW unit supplied to the propeller if the duct is 2.6 m in diameter and the ship is stationary.
Answer:
Thrust developed = 212.3373 kN
Explanation:
Assuming the ship is stationary
Determine the Thrust developed
power supplied to the propeller ( Punit ) = 1900 KW
Duct distance ( diameter ; D ) = 2.6 m
first step : calculate the area of the duct
A = π/4 * D^2
= π/4 * ( 2.6)^2 = 5.3092 m^2
next : calculate the velocity of propeller
Punit = (A*v*β ) / 2 * V^2 ( assuming β = 999 kg/m^3 ) also given V1 = 0
∴V^3 = Punit * 2 / A*β
= ( 1900 * 10^3 * 2 ) / ( 5.3092 * 999 )
hence V2 = 8.9480 m/s
Finally determine the thrust developed
F = Punit / V2
= (1900 * 10^3) / ( 8.9480)
= 212.3373 kN
A particle cannot generally be localized to distances much smaller than its de Broglie wavelength. This means that a slow neutron appears to be larger to a target particle than does a fast neutron, in the sense that the slow neutron will probably be found over a large volume of space. For a thermal neutron at room temperature (300 K), find (a) the linear momentum and (b) the de Broglie wavelength. Compare this effective neutron size with both nuclear and atomic dimensions.
Answer:
a) p = 1.381 10⁻²⁹ kg m / s, b) λ = 4.80 10⁻⁵ m,
c) λ/a₀ = 9.6 10⁴ = 10⁵, λ/aₙ = 4.80 10⁹
Explanation:
a) as the neutral goes at speeds much lower than the speed of light we can use the classical relationships, as the neutral all the thermal energy is the energy of the neutron
E = p c
K T = pc
p = k T / c
p = [tex]\frac{ 1.381 \ 10^{-23} \ 300}{3 \ 10^8}[/tex]
p = 1.381 10⁻²⁹ kg m / s
b) the expression for the de Broglie wavelength
p = h / λ
λ = h / p
λ =[tex]\frac{ 6.63 \ 10^{-34} }{1.381 \ 10^{-29}}[/tex]
λ = 4.80 10⁻⁵ m
c) let's compare this size with the size of atoms a₀ = 0.5 10⁻⁹ m
λ/a₀ = [tex]\frac{ 4.80 \ 10^{-5} }{0.5 \ 10^{-9}}[/tex]
λ/a₀ = 9.6 10⁴ = 10⁵
c) let's compare with the atomic nucleus size aₙ = 10⁻¹⁴ m
λ/aₙ = [tex]\frac{4.80 \ 10^{-5} }{10^{-14} }[/tex]
λ/aₙ = 4.80 10⁹
Consider a coaxial cable (like the kind that is used to carry a signal to your TV). In this cable, a current I runs in one direction along the inner central wire, and the same current I runs in the opposite direction in the hollow conductor. How does the magnetic field B outside the entire cable (outside both the inner wire as well as the hollow conductor) vary as a function of distance away from the cable
Answer:
0 < r < r_exterior B_total = [tex]\frac{\mu_o I}{2\pi r}[/tex]
r > r_exterior B_total = 0
Explanation:
The magnetic field created by the wire can be found using Ampere's law
∫ B. ds = μ₀ I
bold indicates vectors and the current is inside the selected path
outside the inner cable
B₁ (2π r) = μ₀ I
B₁ = [tex]\frac{\mu_o I}{2\pi r}[/tex]
the direction of this field is found by placing the thumb in the direction of the current and the other fingers closed the direction of the magnetic field which is circular in this case.
For the outer shell
for the case r> r_exterior
B₂ = \frac{\mu_o I}{2\pi r}
This current is in the opposite direction to the current in wire 1, so the magnetic field has a rotation in the opposite direction
for the case r <r_exterior
in this case all the current is outside the point of interest, consequently not as there is no internal current, the field produced is zero
B₂ = 0
Now we can find the field created by each part
0 < r < r_exterior
B_total = B₁
B_total = [tex]\frac{\mu_o I}{2\pi r}[/tex]
r > r_exterior
B_total = B₁ -B₂
B_total = 0
The nucleus of a certain type of uranium atom contains
92 protons and 143 neutrons. What is the total charge of
the nucleus?
Answer:
charge = electrons + protons
=92+92
=184
Energy cannot be changed from one variety to another.
Explanation:
According to the law of conservation of energy, energy can neither be created nor destroyed but can be changed from one form to another.
for example : electrical energy can be converted or changed into light energy, sound energy, heat energy etc. this proofs that the law can be trusted because, it has just been proven by the example above that it can be changed and into many forms
Consider the situation in which three identical spheres of clay are launched simultaneously, one along each possible path. All three spheres of clay are launched with the same initial linear speed and collide with the rod at the same time. The time of collision with the rod for each sphere is time t0. Which of the following predictions is correct about the motion of the system containing the rod and all three spheres of clay immediately after the collision?
a. The system will rotate in the clockwise direction with a constant angular speed.
b. The system will rotate in the counterclockwise direction with a constant angular speed.
c. The system will rotate in the clockwise direction with a changing angular speed.
d. The system will rotate in the counterclockwise direction with a changing angular speed.
Answer:
a. The system will rotate in the clockwise direction with a constant angular speed.
Explanation:
As all the clay is identical sphere and there will be hence same mass 'm' for all three clay spheres. Now their identical speed 'v' and collision time [tex]$'t_0'$[/tex] are also same. So all the spheres will exert same force F on the rod.
[tex]$f=\frac{mv}{t_0}$[/tex]
Force exerted by the clay Z on rod is passing through pivot, so no torque will be produced.
Now clay X will collide at near distance from pivot than that of clay Y.
So clay Y will produce more torque than clay X. So clay Y will give more clockwise torque. So rod will rotate clockwise.
Now in any impact because net force and net torque are zero (because in impact torque and force occurs in equal and opposite pairs). So net angular momentum will be conserved and hence angular speed will be constant.
Therefore it is clear that option (a) is correct.
Can you please help me ?
Answer:
Distance is 300 and displacement is 100
Explanation:
Distance= 100+100+100=300
Displacement=100
plz mark me as brainliest.
Naming covalent compounds
P4S5
Answer:
what the heck is sakurfa
Explanation:
Below are the ingredients of photosynthesis. Organize them to show what is used and what is produced
during this process.
carbon dioxide
water
oxygen
glucose
sunlight
_____plus_____in the presence of_____result in_____plus_____
Answer:
carbon dioxide plus water in the presence of energy from light, results in glucose plus oxygen
The process is like carbon dioxide plus water in the presence of sunlight result in glucose plus oxygen.
What is photosynthesis?Photosynthesis is a process that plants and other organisms use to convert light energy into chemical energy that can then be released to fuel the organism's activities via cellular respiration.
Photosynthesis is important because it is the process by which plants convert carbon dioxide into oxygen using sunlight. Animals require oxygen to survive, and plants serve as nature's air filter, filtering out harmful carbon dioxide.
Photosynthesis is the conversion of light energy by phototrophs into chemical energy, which is then used to power cellular activities. Sugars, which are formed from water and carbon dioxide, are used to store chemical energy.
The process of photosynthesis includes:
[tex]6CO_2+6H_2O \frac{Sunlight}{chlorophyll} > C_6H_1_2O_6+6O_2[/tex]
Thus, this is the basic process of photosynthesis.
For more details regarding photosynthesis, visit:
https://brainly.com/question/1388366
#SPJ2
what is the meaning of love ? ...What is love?
Answer:
love is a feeling that you get for people that you care about.
Explanation:
Answer:
Love is a feeling of affection for someone, when you adore somebody.
I wish true love and soul mates were real ( •_•)
describe brefly how you can charge a body
Answer:
charge or change?
Explanation:
I'll write my answer in the comments when you reply
What are applications of zeroth law of thermodynamics?
Answer:
Applications of zeroth law of thermodynamics:
1. When we get very hot food, we wait to make it normal. In this case, hot food exchanges heat with surrounding and brings equilibrium.
2. We keep things in the fridge and those things come equilibrium with fridge temperature.
3. Temperature measurement with a thermometer or another device.
4. In the HVAC system, sensors or thermostats are used to indicate temperature. It always comes in a thermal equilibrium with room temperature.
5. If you and the swimming pool you’re in are at the same temperature, no heat is flowing from you to it or from it to you (although the possibility is there). You’re in thermal equilibrium.
Which statement best explains why objects are pulled toward Earth’s center?
Answer:
Earth has a much greater mass than objects on its surface
what kind of charge does an object have if it has extra positive charges
Friction forces cannot change the speed and direction of an object True or false
Answer:
false
Explanation:
This statement is false since frictional force always reduces the speed of and object and also always acts opposite to the direction of a motion. The correct answer is False
FRICTION
Frictional force is a force that opposes motion of an object.
When an object is in motion, the speed of the object will be constant only when the forces acting on the object are balanced. That is, the frictional force balanced or equal to the force applied. A balanced force cannot change the speed and direction of an object in motion.
There will be change in speed and direction when forces acting on the object are not balanced.
Friction forces cannot change the speed and direction of an object. This statement is false since frictional force always reduces the speed of and object and also always acts opposite to the direction of a motion.
Therefore, the correct answer is False.
Learn more about Friction here: https://brainly.com/question/1424758
how can we know that atmosphere exert pressure explain with figure
Q10. Refer to the Condon table to answer question
Second letter
UUU
UCU
UGU
OUC
UCO
UAC
Leu
UAA Btop UOA Stop
UCG UAG Stop UGOT
CU
CCU
CAU CGU
CUC
ССС
САС
Leu
CUA
CGC
Pro
CCA
CAA COA
CUG
CCG
AD
RoecoDoo Do
Asn
AUU
ACU
AUC File
ACC
AUA АСА
AUG Met ACO
AAU
ААС
ΑΛΛΑ
LANG
AGU
Ser
AGC
Thr
Jue AGA
Jara
AGG
sp
GU
QUC
GUA
GUG
GCU GAU
GCC
Ala
GAC
GCA GAA
OCG GAG
GOC
GGA
Jolu 900
Write the mRNA copy of this DNA CCG GA
GCT (original) | Imk]
Use the Condon table above to list all the amin
Answer:
so you have a question
Explanation:
either way, have a nice day
To enhance heat rejection from a spacecraft, an engineer proposes to attach an array of rectangular fins to the outer surface of the spacecraft and to coat all surfaces with a material that approximates blackbody behavior. Consider the U-shaped region between adjoining fins and subdivide the surface into components associated with the base (1) and the side (2). Obtain an expression for the rate per unit length at which radiation is transferred from the surfaces to deep space, which may be approximated as a blackbody at absolute zero temperature. The fins and the base maybe assumed to be isothermal at a temperature T. Comment on your result. Does the engineer's proposal have merit
Answer:
Attached below is the required diagram related to the question
answer :
q'3 = WбT^4
engineer's proposal has merit
Explanation:
Let : A'3 represent the deep space
A'1 represent the surface area , F13 and F23 represent the view factors
T1 , T2, T3 ; represent temperatures
q'3 represent net rate of heat radiation
Derive the expression for the rate per unit length at which radiation is transferred from the surfaces to deep space
derived expression ; q'3 = WбT^4
attached below is a detailed solution
Given that The emission is proportional to the area of the opening and the surfaces ( 1 and 2 ) have the same temperature hence this problem can be treated as a two surface enclosure. hence the engineer's proposal have merit .
attached below is a prove ( b )
A boat travels west at 20km/h. The journey lasts 3hours. How far has the boat travelled? *
A)60km
B)60km[W]
C)17km[W]
D) 6.6km[W]
Answer:
B)60km[W]
Explanation:
The boat travels 20km/h. So every hour the boat goes 20 miles. So if one hour equals 20km. Then 3 hours will be 3*20km which equals 60km. The boat is also going west. So you should consider putting that in your answer as well. So the answer would be B)60km[W].
Hope that helps!
D) 3. Two objects will attract one another when they have what
Answer:
Explanation: NOTHING IN COMMON
All the questions are in the photos above. Thanks guys!
Answer:
right
Explanation: