If a parent cell has 24 chromosomes , how many chromosomes will each daughter cell have? Then compare the chromosomes in the parent cell and the daughter cells.

Answers

Answer 1

Answer:

If a cell has 24 chromosomes before cell division then daughter cell resulting from mitotic division will have 24 chromosomes while daughter cell resulting from the meiotic division will contain 12 chromosomes each.

Explanation:


Related Questions

During a chemical or physical change, energy may be...

a. created into another form
b. destroyed and reinvented into another form
c. converted into another form
d. disappeared​

Answers

Answer: C: Converted into another form

Explanation: pues es esa calale y si va a hacer

During a chemical or physical change, energy is converted to another form. Energy cannot be created or destroyed. During a chemical reaction, physical change the energy and mass are conserved.

What is law of conservation of energy ?

According to the law of conservation of energy energy can neither be crated nor be destroyed. Hence, the total energy of a system is always conserved.

However, energy can be transformed from one form to the other. Therefore, the energy lost in one form is gained in another form. For example, in all electrical devices, the electrical energy is converting to other forms of energy such as light, thermal , mechanical etc.

Similarly, during a chemical reaction, the energy released by a reaction system is equal to the energy absorbed by other reacting system. Similarly in electrochemical cells the chemical energy is converting to electrical energy.

Find more on energy transformation:

https://brainly.com/question/17589256

#SPJ6

What is the molar mass of phosphorus pentachloride and uranium hexafluoride?

Answers

Answer:

PCl₅ = 208.22g/mol. UF₆ = 352.03g/mol.

Explanation:

Find the atomic mass of each element–and if there's a subscript (you multiply the atomic mass by that much). P= 30.97g, Cl= 35.45g; 30.97+35.45(5) = 208.22g [same idea with UF₆]

What is the rise in sea level between 1930 and 2003?
A)
About 20cm
B)
About 16cm
C
About 12cm

Answers

Answer:

about 16

Explanation:

its 20 - ( approximately 5)

= approximately 16

Answer:

It should be (C) about 12cm

What would happen if a neutron was added to Lithium (7)

Answers

Answer:

if you add a neutron to lithium-7 it becomes a compound nucleus of lithium-8

how is wind energy captured?

where is wind energy found?

how is water energy captured?

where is water energy found?


plz use the passage i put. plz and thank you!!!!!

Answers

Explanation:How is wind energy captured? = A wind turbine turns wind energy into electricity using the aerodynamic force from the rotor blades, which work like an airplane wing or helicopter rotor blade.where is wind energy found? = Location of U.Show is water energy captured? = Hydropower uses a fuel—water—that is not reduced or used up in the process. Because the water cycle is an endless, constantly recharging system, hydropower is considered a renewable energy.where is water energy found? = China, Canada, Brazil

What is the molecular formula of the molecule that has an empirical formula of CH2O and a molar mass of 120.12 g/mol

Answers

Answer:

C4H8O4

Explanation:

Let (CH20)x

C=1*12.01=12.01     (12.01, 1.01, 16.00 Avg mass of elements)

H=2*1.01=2.01

O=1*16.00=16.00

12.01 + 2.01 + 16.00 = 30.03

120.12/30,03=4

==> (CH2O)4 = C4H8O4

The molecular formula of the molecule that has an empirical formula of [tex]CH_2O[/tex] is equal to [tex]C_4H_8O_4[/tex].

Given the following data:

Empirical formula = [tex]CH_2O[/tex]Molar mass = 120.12 g/mol.

Scientific data:

Molar mass of oxygen = 16 g/mol.Molar mass of hydrogen = 1 g/mol.Molar mass of carbon = 12 g/mol.

To determine the molecular formula of the molecule that has an empirical formula of [tex]CH_2O[/tex]:

First of all, we would find the molar mass of [tex]CH_2O[/tex]:

[tex]CH_2O =12 +(1\times2)+16\\\\CH_2O =30\;g/mol[/tex]

For molecular formula:

[tex](CH_2O)n = 120.12\\\\30n = 120.12\\\\n=\frac{120.12}{30}[/tex]

n = 4.0

[tex](CH_2O)_4 = C_4H_8O_4[/tex]

Read more: https://brainly.com/question/21280037

A molecule contains 24.36 g of nitrogen and 62.64g of sliver

Answers

Answer:

This molecule is AgN3

Explanation:

Answer:

AgN3

Explanation:

Mass of nitrogen N is given as 24.36 g

Molar mass of nitrogen N= 14 g/mol.

amount of substance in mol of N = mass/molar mass

=24.36 g/ 14 g/mol.

=1.74 mol.

Given mass of silver= 62,64 g.

Molar mass of silver Ag=107.87 g/mol

Number of mols=62.64 g ÷ 107.87 g/mol.

=0.58 mol.

Ratio of number of mol of N and number of mols of Ag = 1.74 mol / 0.58 mol

=3:1

Hence, empirical formula is AgN₃.

PLEASE HELP !!
Use the diagram below to answer the following questions.
PLEASE HELP
E TE
Figure B
In Figure B, which region contains the noble gas family of elements?
ОА
OD
ОС
OB

Answers

Noble gas located in the region D

Further explanation

Noble gas are located in group 18 in the periodic table consisting of helium (He), neon (Ne), argon (Ar), krypton (Kr), xenon (Xe), have a stable electron configuration where the valence electrons are 8(full outer shell of electrons), so it is very hard to react because of its stability

If we look at the periodic system of the elements, the noble gases are on the far right, so that in Figure 8 it is located in area D

And the other region :

A : alkali elements(group 1),

B : alkaline earth elements(group 2)

C : halogen elements(group 17)

i need to know what occupied vs full means for chemistry

Answers

You can get the answer on quizlet or google

Calculate the number of protons and neutrons for ²⁴Mg and 88Sr.

Answers

Answer:

12 protons and 12 neutrons are present in Mg and

38 protons and 50 neutrons are present in Sr

Explanation:

Answer:

For ²⁴Mg

1. Proton number = 12

2. Neutron number = 12

For ⁸⁸Sr:

1. Proton number = 38

2. Neutron number = 50

Explanation:

For ²⁴Mg:

1. Determination of the number of proton.

The atomic number of an element is simply defined as the number protons in the atom of the element. The atomic number of ²⁴Mg is 12 since no two elements have the same atomic number.

Atomic number = 12

Proton number = Atomic number

Proton number = 12

2. Determination of the Neutron number.

Mass number = 24

Proton number = 12

Neutron number =?

Mass number = Proton + Neutron

24 = 12 + Neutron

Collect like terms

Neutron = 24 – 12

Neutron number = 12

For ⁸⁸Sr:

1. Determination of the number of proton.

The atomic number of ⁸⁸Sr is 38.

Atomic number = 38

Proton number = Atomic number

Proton number = 38

2. Determination of the Neutron number.

Mass number = 88

Proton number = 38

Neutron number =?

Mass number = Proton + Neutron

88 = 38 + Neutron

Collect like terms

Neutron = 88 – 38

Neutron number = 50

What is the name given to the group 0 elements

Answers

Answer:

the noble gases

The __________ system is responsible for bringing oxygen into the lungs and releasing carbon dioxide from the body

Answers

ʕ•ᴥ•ʔ ▼・ᴥ・▼ I think the answer is respiratory system

Answer: ̄ノ゙(。・∀・)ノ゙o(* ̄▽ ̄*)ブ(* ̄3 ̄)╭o(* ̄▽ ̄*)ブ(* ̄3 ̄)╭(* ̄3 ̄)╭(* ̄3 ̄)╭(* ̄3 ̄)╭(* ̄3 ̄)╭(* ̄3 ̄)╭(* ̄3 ̄)╭(* ̄3 ̄)╭(* ̄3 ̄)╭(* ̄3 ̄)╭(* ̄3 ̄)╭(* ̄3 ̄)╭(* ̄3 ̄)╭(* ̄3 ̄)╭(* ̄3 ̄)╭(* ̄3 ̄)╭(* ̄3 ̄)╭(* ̄3 ̄)╭(* ̄3 ̄)╭(* ̄3 ̄)╭(* ̄3 ̄)╭(* ̄3 ̄)╭(* ̄3 ̄)╭•)>⌐)↖↗↘↙↜↚↯↟↝↖↔↕↙↘↙↘↘↞↴↯↚↨⇌⇋⇆⇉⇑↶⇋⇋↳¾⁷¼¼⁶⁴⁷⁰⁰⁰⁹⅕⅘⅓⅕⅓⅕⨊⨡⨔⨩⨦⨶⨼⨿⨷⨷⨻⨼⨹₴ The answer is resperitory

Explanation:

Which of these are an atom's valence electrons?​

Answers

Answer:

The Outer-most Electron shell contains the valence electrons.

Bonus Info:

Valence Electrons are used by atoms to make ionic bonds.

Answer:

Valence electrons are the electrons in the outermost shell, or energy level, of an atom. For example, oxygen has six valence electrons, two in the 2s subshell and four in the 2p subshell. We can write the configuration of oxygen's valence electrons as 2s²2p⁴.

Explanation:

ur welcome

i was doing this in school and i watched a video

What is this called? it might be sideways but it show look like a Y

Answers

Answer:

I'm thinking it might be Element 39: Yttrium, as this is Chemistry.

Explanation:

Two substances in a mixture differ in density and particle size. theses properties can be used to

Answers

Answer:

option 1. Two substances in a mixture differ in density and particle size. These properties can be used to separate the substances. These properties can be manipulated in order to have a better separation between the two substances.

Explanation:

Answer:

Two substances in a mixture differ in density and particle size. These properties can be used to separate both of them using the separating funnel or using filtration (filter paper).

Explanation:

Since their densities are different, one substance should float above the other in the mixture which allows for the separating funnel to let the substance sinking below (with the heavier density) to flow out first before changing the beaker to let the lighter substance flow out.

The substance with a bigger particle size would not be able to pass through the filter paper unlike the substance with the smaller particle size as the filter paper's pores is not big enough for it to pass through, separating both substances (with one on the paper and the other outside the filter paper, preferably in the beaker placed below the paper).

Which substance is correctly identified as a homogeneous or heterogeneous mixture?

A. salad -- heterogeneous
B. milk --- heterogeneous
C. river water --- homogeneous
D. beach sand --- homogeneous

Answers

Answer:

A

Explanation:

A salad with lettuce, cheese, seeds, tomatoes, broccoli, and other vegetables is an example of a heterogeneous mixture.

Milk is not mixed with anything so that is incorrect

River water is mixed in with dirt and minerals so this one is incorrect

Beach sand is incorrect because you can see colored particles.

SOMEONE HELP ME PLEASE ILL GIVE BRAINLY

Answers

answer: chemical change

step-by-step explanation: because if it’s changing through heat, the temperature could be different. Chemical changes happen on a molecular level when you have two or more molecules that interact. Chemical changes happen when atomic bonds are broken or created during chemical reactions. therefore physical change in this given situation isn’t possible.

hope this helped.

Order the following elements from Highest to Lowest Electronegativity.
K, Sc, Ca, Zn, Br
Sc, K, Br, Zn, Ca
OK, Ca, Sc, Zn, Br
O Br, Zn, Sc, Ca, K
Ca, Zn, Br, K, SC

Answers

Answer:

O, Ca, Zn, Br

Sc, K, Br,

Explanation:

The correct order of the chemical elements from highest to lowest electronegativity is: C. Br, Zn, Sc, Ca, K.

Electronegativity refers to a measure of the ability of an atom of a chemical element to attract any shared pair of electrons.

Generally, the electronegativity of a chemical element typically increases across the period from left to right.

In Chemistry, the electronegativity of some of the chemical element are:

Bromine (Br) = 2.96Calcium (Ca) = 1.0Zinc (Zn) = 1.65Potassium (k) = 0.82Scandium (Sc) = 1.36

Hence, the order of the chemical elements from highest to lowest electronegativity is:

1. Bromine (Br) = 2.96

2. Zinc (Zn) = 1.65

3. Scandium (Sc) = 1.36

4. Calcium (Ca) = 1.0

5. Potassium (k) = 0.82

Read more: https://brainly.com/question/18214726

What is it called when elements combine to form a chemical compound?

Answers

Explanation:

A compound is a unique substance that forms when two or more elements combine chemically.Compounds form as a result of chemical reactions. The elements in compounds are held together by chemical bonds. A chemical bond is a force of attraction between atoms or ions that share or transfer valence electrons.

hope it helpful ✌️✌️

As shown by the periodic table, why do the elements potassium and sodium have similar chemical properties?

Answers

Hey mate
This is the answer

The elements potassium and sodium have similar chemical properties because they have the same number of valence electrons and form +1 ions.

Plsssssss mark me as brainliest

HELP IN 8TH GRADE ADV SCIENCE

Answers

Answer:

protons: 36

neutrons: 48

electrons: 36

2CuO+2NH3------ 3Cu + 3H2O+ N2. Given that the relative molecular mass of copper oxide is 80, what volume of ammonia is required to completely reduce 120 g of Copper oxide? ( Cu=64, O=16, N=14)​

Answers

Volume of Ammonia(NH₃) = 22.4 L

Further explanation

Given

Reaction

3CuO+2NH₃⇒ 3Cu + 3H₂O+ N₂

In the problem, the CuO coefficient should be 3 not 2

M CuO = 80

mass CuO = 120 g

Required

The volume of NH₃

Solution

mol CuO :

[tex]\tt mol=\dfrac{mass}{M}\\\\mol=\frac{120}{80}\\\\mol=1.5[/tex]

From the equation, mol ratio CuO : NH₃ = 3 : 2, so mol NH₃=

[tex]\tt \dfrac{2}{3}\times 1.5=1~mol[/tex]

Assume at STP(0 °C, 1 atm) ⇒1 mol = 22.4 L, then volume of NH₃=22.4 L

What is environment?​

Answers

Answer:

where an organism lives which includes everything that surrounds and influences the organism.

(oh no)
What is the mass of silicon when there are 1.8 x 10^21 atoms of silicon?

Answers

Answer:

Mass = 0.084 g

Explanation:

Given data:

Mass of silicon = ?

Number of atoms of silicon = 1.8 × 10²¹ atom

Solution:

Avogadro number:

The given problem will solve by using Avogadro number.

It is the number of atoms , ions and molecules in one gram atom of element, one gram molecules of compound and one gram ions of a substance.  The number 6.022 × 10²³ is called Avogadro number.

1 mole = 6.022 × 10²³  atoms

1.8 × 10²¹ atom × 1 mole /  6.022 × 10²³  atoms

0.299× 10⁻² mol

0.00299 mol

Mass of silicon:

Mass = number of moles × molar mass

Mass = 0.00299 mol × 28.1 g/mol

Mass = 0.084 g

what's the molar mass of Li3p

Answers

Answer:

51.79g Li₃P.

Explanation:

Li has a molar mass of 6.94 g (since there are 3, you multiply it 3 times) and P has a molar mass of 30.97 g. 6.94(3) + 30.97 = 51.79g.

EMERGENCY!!! Can someone tell me the answer plz plz I’ll give you brainlist and points plz This is my final test No wrong answers

Answers

Answer:

A. the valence electrons

Explanation:

Answer:

The valence electrons

Explanation:

The valence electrons determine an element's properties because chemical properties of each element are determined by the element's electronic configuration and PARTICULARLY by its outermost valence electrons. I hope it helps!

                      ~Good luck

When using a light microscope, focus the specimen with the scanning objective
lens first.
Reasoning:

Answers

Answer:

The light microscope bends a beam of light at the specimen using a series of lenses to provide a clear image of the specimen to the observer.

When we drink water, it is absorbed into our blood through the digestive tract. If the concentration of water in body cells is low, cells must get water from the blood. What process allows water to enter body cells from the blood?

Answers

Answer:

Osmosis

Explanation:

Water is very essential for the body. When we drink water, our blood cells absorbs water from the body. This happen by a process called as osmosis process. Osmosis is type of diffusion process.

Water along with oxygen and carbon dioxide are some of the simple molecules that moves into the blood cell. Osmosis is the process by which water molecules passes into the cell bodies through its semi permeable membrane.    

12.3 moles of sodium is what mass of Na?​

Answers

Answer:

1 mole of Na = mass of 22.99 g, 1 mole of Si = mass of 28.09 g.

Methane(CH4) is a gas at room temperature, Methanol (CH3OH) is a liquid. Explain why using types of intermolecular forces present.

Answers

Explanation:

Methane is a gas at room temperature but methanol is a liquid because in methane there's London dispersion intermolecular force but in methanol there's H-bond and London dispersion force. H-bond is more stronger than London dispersion force. So, it increases the boiling point of methanol that's why methane is gas at room temperature due to weak attraction of London dispersion force and methanol is liquid.

Methanol has a higher boiling point than methane due to stronger intermolecular forces (IMFs), or attraction between individual molecules. This makes its molecules more difficult to separate, requiring more energy and resulting in a higher boiling point.

What are intermolecular forces?

An intermolecular force is a force that mediates the interaction of molecules, including electromagnetic forces of attraction or repulsion that act between atoms and other types of neighboring particles, such as atoms or ions.

Intermolecular forces are classified into five types namely,

Ion-dipole forces.Ion-induced dipole forces.Dipole-dipole forces.Dipole-induced dipole forces.Induced dipole forces.

Between ions and polar dipole molecules, ion-dipole forces exist.

Since of stronger intermolecular forces (IMFs), or attraction between individual molecules, methanol has a higher boiling point than methane.

This makes it more difficult to separate its molecules, requiring more energy and resulting in a higher boiling point.

Thus, this is the reason of using types of intermolecular forces present.

For more details regarding intermolecular forces, visit:

https://brainly.com/question/9007693

#SPJ2

Other Questions
Pleaseeeee answer correctly !!!!!!!!!!!!!! Will mark Brianliest !!!!!!!!!!!!!!!!!! 16NOT TOSCALEThe dagen sboas a circle, centre O.AB is a chord of length 12 cm.Vis the mid-point of 43 and OM = 45 cmCalculate the radius of the circle. in the expression 15- the sum of 6 and. 7 do you add or subtract first Two models of the same compound are shown.On the left labeled Model A 2 large overlapping black spheres with 3 small blue spheres overlapping the rear black sphere and 2 medium red spheres overlapping the front black sphere. One of the red spheres has a small blue sphere overlapping it. On the right labeled Model B 2 C's connected by a black line. The C on the left has 3 H's attached by 1 black line each and the C on the right has 2 Os attached to it. The top O is attached by 2 black lines and the bottom O by 1 black line. The bottom O also has an H attached to it by 1 black line.In what way is Model A better than Model B?Model A shows the types of elements in the compound, but Model B does not.Model A shows the total number of atoms in the molecule, but Model B does not.Model A shows the three-dimensional shape of the molecule, but Model B does not.Model A shows the number of atoms of each element in the molecule, but Model B does not. A sample is in the second half-life. What percent of the sample is stable at this point? A. 12.5%B. 25% C. 50% D. 75% Factorize: Challenge problem:x^2+19x+78help :) PLEASE HELP!!!Showing only certain data on a spreadsheet is called (3 points)A. analyzingB. bufferingC. chartingD. filtering What is a stimulus? there are no options actually so plz help thank you Which type of energy causes raindrops to fall onto Earth's surface?A. Gravitational energyB. Geothermal energyC. Solar energyD. Nuclear energy Simplify 81 to the negative 3 fourths power. (1 point)Question 8 options:1) 272) negative 1 over 273) 274) 1 over 27 How did the Akkadian Empire grow under Sargon?Sargon invented irrigation systems.Sargon invented a cuneiform writing system.Sargon encouraged the construction of roads.Sargon united the Sumerian city-states into an empire. Write a short story about eating lunch in a park. Use as many onomatopoeia's as you can. What state did the Indians eventually get defeated in? Which point on the number line could represent-25? D 54 -3 -2 -1 0 1 2 3 4 5 OB OD. I will mark 1 answer brainlist Why are questions on the causes and solutions for the Great Depression controversial today 16. Keisha has a bag that contains 3 red, 2 orange, 1 yellow, and 2 purple marbles. She willrandomly choose 1 marble from the bag. What is the probability that Kelsha will choosean orange marble?O.382-bh108o0142 A magazine published an article stating that drinking water obtained from waste water is harmful for health. Why is this information most likely to be incorrect? The article does not provide a scientific basis for the information magazines do not generally publish reliable scientific information drinking water has been obtained from recycled waste water since many years scientific tests show that drinking water obtained from waste water is pure and safe the act of an insurance company publishing misleading information about its policy provisions is called the bet story he thinks that he will win we know this because how is wind energy captured?where is wind energy found?how is water energy captured?where is water energy found?plz use the passage i put. plz and thank you!!!!!