If a heat engine is operating between two temperatures (QH > Qc), what is the maximum efficiency attainable?

A spanner with longer handle increases the torque which in turn requires less force to undo the bolt.

This is because the rotational effect of a force depends on the perpendicular distance of the line of action of the applied force from the axis of rotation. The greater the vertical distance, the less force is required to rotate the body. That's why a spanner has a long handle. Long handles relieve pressure due to increased surface area. A long handle wrench is recommended. The larger the area, the lower the pressure, and the larger the area, the lower the pressure. The longer the handle, the greater the torque, and it will be easier to open a stuck bolt with a certain amount of force.

To know more about torque, visit:

https://brainly.com/question/29024338

#SPJ4

Answer:

C

Explanation:

(C) Positively charged particles moved upward, causing the top of the rod to have a positive charge and the bottom of the rod to have a negative charge.

When a neutral and non-polarized conducting rod moves through a magnetic field, it will experience a force known as the Lorentz force. This force acts on the moving charges within the rod, and causes them to move perpendicular to both the direction of motion and the magnetic field. In this case, since the rod is moving to the right, and the magnetic field is pointing into the screen, the Lorentz force will act upward on the positively charged particles within the rod. This motion will cause a separation of charges in the rod, with the top having a positive charge and the bottom having a negative charge.

If air resistance is negligible and our toy dart cannon generates a maximum initial velocity of 2.78 metres per second, we can shoot a dart up to a maximum distance of 0.74 metres from the ground.

Velocity is a time-dependent measure of how quickly an object's position changes in relation to a frame of reference. The velocity of an object indicates both its direction and speed of motion. Final velocity is a vector quantity that describes the speed and direction of a moving body after it has reached its maximum acceleration. The relationship between two points in physical space is given by the formula R = v2 sin2 theta/g.

R(max) equals v2/g if theta is 45 degrees.

R = 2.7^2 / 9.8 = .74 m

R = v^2 sin 2 theta / g

Learn more about speed here

https://brainly.com/question/28224010

#SPJ4

Charges a and d, on the other two corners, have equal charge, while both b and c have a charge of 1.0 c, so the charge so that the force on b is zero is -2.8.

Charge is the material's physical quality that results in a force being applied to it when it is exposed to an electromagnetic field. You can have a positive or negative electric charge. Opposite charges attract one another while like charges repel one another. Neutral refers to an object that carries no net charge.

A square is a geometric shape with four equal-length sides and four right-angled corners. When diagonally opposite charges are paired, the fields inside every duo cancel in examples 1 and 2, leaving no net field at the centre.

To learn more about Charge here

brainly.com/question/19886264

#SPJ4

The label B in the diagram represents wavelength (last option)

We'll determine what label B represents by defining the options given. This is shown below:

Crest: This is the maximum value of the upward displacement of a progressive wave.

Amplitude: This is the maximum displacement of a wave.

Trough: This is the minimum value of the downward displacement of a progressive wave.

Wavelength: This is the distance between two successive crest or trough of a wave

Now, we can see clearly that label B exist bewteen two crest.

Thus, from the definitions given above, we can conclude that lebel B represents wavelength (last option)

Learn more about wavelength:

https://brainly.com/question/13659036

#SPJ1

The additional force needed is 590 N.

Given,

Force of 110 N is applied in one direction and a force of 700 N is applied in other direction. In order to keep the box stationary, additional force applied is difference between the two applied forces.

i.e. Additional force = 700N - 110N = 590N

To k now more about force visit :

https://brainly.com/question/16978243

#SPJ4

All forms of water entering and leaving the volume selected should be accounted for in order to accurately determine the temperature rise in the lake caused by the power plant.

When determining the temperature rise of a lake caused by a nearby power plant, it is important to consider all forms of water entering and leaving the selected volume.

This includes not only the water being withdrawn and returned by the power plant, but also any other sources of water entering or leaving the lake, such as precipitation, evaporation, and surface or ground water flow.

By accounting for all of these inputs and outputs, a more accurate understanding of the overall heat balance of the lake can be obtained and the impact of the power plant on the lake's temperature can be better understood.

To learn more about power plant visit: https://brainly.com/question/16064039

#SPJ4

The most practical application of sonar is measuring the distance between objects in the ocean.

option A.

Sonar is a technique that uses sound propagation to navigate, measure distances, communicate with or detect objects on or under the surface of the water, such as other vessels.

So basically, sonar is applied under water to measure the distance of objects such minerals, vessels , etc.

Thus, we can conclude that the most practical application of sonar is found under water, for measuring the distance between objects in the ocean.

Learn more about sonar here: https://brainly.com/question/14090821

#SPJ1

The combination of cloudy skies, quiet winds, and humid air would encourage the greatest temperature shift from sunrise to mid-afternoon.

The location of a place in relation to the sea is the primary factor that affects temperature. Compared to land, the sea both gains and loses heat gradually. Rapid warming and cooling occur on land.

Latitude, height, distance from the sea, and ocean currents are the four unavoidable factors that affect temperature.

Compared to land, oceans warm up and cool down considerably more gradually. This indicates that, for the same latitude and elevation, coastal areas tend to be warmer in the winter and cooler in the summer.

To learn more about Temperature :

https://brainly.com/question/29739788

#SPJ4

The greatest temperature change from sunrise to mid-afternoon would be caused by a mix of gloomy skies, calm winds, and humid air.

The main factor affecting temperature is where a place is in proximity to the sea. The sea progressively warms and cools compared to land. On land, there is a sudden warming and cooling.

The four unavoidable factors that affect temperature are latitude, height, distance from the sea, and ocean currents. Oceans warm up and cool down much more gradually than land does. This shows that coastal places typically experience warmer winters and cooler summers for the same latitude and elevation.

To learn more about Temperature Visit: brainly.com/question/29739788

#SPJ4

A bullet fired from a gun is the scenario which describes conservation of momentum.

A closed system is one which is not affected by the any external force or activity. When a bullet is fired from a gun it generates a recoil velocity in the gun. This is due to the conservation of momentum. Initially the momentum of the system (gun + bullet) is zero. When a bullet is fired because of having less mass as compared to the gun, it escape out with more velocity. To conserve the momentum of the system the gun also generates velocity in the backward direction. Due to the heavy mass of the gun as compared to the bullet, this velocity is very less, which is called recoil velocity.

To know more about conservation of momentum, here

https://brainly.com/question/3920210

#SPJ4

After 2.00 billion seconds you will be around 63 years assuming a 365 day year.

To know the answer you need to know the number of seconds in a year.

First, you need to multiply, 60 × 60

to find the number of seconds in an hour, which is 3600 seconds.

Then, multiply = 3600 × 24

to find the number of seconds in a day, which is 86,400 seconds.

Next, multiply = 86400 × 365

to find the number of seconds in a year, which is 31,536,000 seconds.

Finally, divide 2,000,000,000 by 31,536,000 and you will get about 63 years.

To know more about such age related calculation,

brainly.com/question/502038

#SPJ4

The student explains that conduction is the process of charging an object by touch. When two oppositely charged conductors make contact, this charge is divided between two conductors and is transferred to the uncharged conductor, which charges the conductor.

Conduction is one of the three main ways that heat energy is transferred.

Consequently, When two oppositely charged conductors make contact, this charge is divided between two conductors and is transferred to the uncharged conductor, which charges the conductor.

To know more about the conduction, here

brainly.com/question/893656

#SPJ4

According to the problem the frequency of the oscillation (in hz) is 2.33 hz.

Oscillation is a repetitive variation in the value of a physical quantity over time. It can involve a periodic change in the magnitude of a signal or the direction of a signal's movement. Examples include the swinging of a pendulum, the vibration of a tuning fork, the alternating current in an electrical circuit, and the periodic motion of a molecule. Oscillation is a key component of many natural phenomena, from ocean waves to the beating of a human heart. It is also a fundamental concept in physics, engineering, and mathematics. Oscillation is essential for the operation of numerous mechanical and electronic systems, from motors and generators to cell phones and radios.

The frequency of the oscillation (in hz) is 2.33 hz.
This is because frequency is equal to the inverse of the period (time) of the oscillation.
The period of the oscillation is 0.43 s, so the frequency is calculated by taking the inverse of 0.43 s,
which is 2.33 hz.

To learn more about oscillation
https://brainly.com/question/26449711
#SPJ4

Answer:

250.025 Newtons

Explanation:

Fnet=ma

while the fabric is negatively charged, becoming positively charged. The opposing charges that two objects get when they brush against one another are explained. according to convention law.

Because electrons are transported from the glass to the silk when a silk cloth is stroked across a glass rod, opposing charges are observed on both. Charge is neither generated nor destroyed during this procedure. Simply said, it is passed through one body to the other. The conservation law of charge therefore agrees with this observation.

We are aware of the mass that electrons have. Therefore, when we remove some electrons from of the body, it will become positively charged and lose mass. Consequently, when a silk is brushed on a glass rod.

To know more about positively charged visit:

https://brainly.com/question/2903220

#SPJ4

The change in the internal energy of the gas is found as 4189.6 J.

internal drive U is the sum of the kinetic energy brought about by the molecular motion and indeed the potential energy brought about by the vibrational motion as well as electric energy the atoms among molecules in a system or perhaps a body with clearly defined limits.

We will consider the gas to just be perfectly ideal.

Change in volume,

∆V= n* R*( T2 - T1)/ P

∆V = 7.33 * 0.082* 27.5 K/ 1

∆V  = 16.53 L

Now,

Work done for expansion,

W = - P*∆V = - 1 atm* 16.53 L

W = - 16.53 L atm

W = -16.53 L atm * (8.314 J/0.082 L atm)

W = - 1676 J

(0.082 L atm = 8.314 J)

Heat transfer, Q = n* Cp*(T2 - T1)

Q = 7.33* 3.5*8.314* 27.5

Q = 5865.6 J

We know that, Cp = 3.5*R, if  diatomic gas

As per first law of thermodynamics,

∆E = Q + W = 5865.6J - 1676 J

∆E  = 4189.6 J

Thus, the change in the internal energy of the gas is found as 4189.6 J.

To know more about the internal energy, here

https://brainly.com/question/30207866

#SPJ4

The signs of the charge qX on X is positive and qY on Y is positive after ball carrying the negative charge is removed and the balls X and Y are separated.

At the time when the third ball carrying a negative charge is brought near the first two, it gets polarized such that X contains +ve charge and Y contains a +ve charge.  After this the ball X is connected to the ground when  the positions of these balls are fixed and the electron move up from the ground. After that the ground wire should be disconnected. The ball carrying the negative charge is removed and the ball X and Y are separated. Due to this the electron has cancelled the net +ve charge on Y. Hence the charge on both X and Y is positive.

To learn more about charge click here https://brainly.com/question/11944606

#SPJ4

Answer:

When you pull with a force upward so that the box is just about to rise, the sum of the two tensions (one from the ceiling and one from your hands pulling) equal the weight of the box. Thus C + H = W; where C is the ceiling rope tension and H is the hand rope tension. W = mg, the weight of the box.

Because there is no mechanical advantage in the single pulley, C = H, the two tensions are equal. So, we can write 2H = W = mg; and thus, H = W/2 = mg/2 when the box is just about to rise. To raise the box, you must have 2H>W; so that H > W/2 which means you need to yank upward on the rope in your hand with a force H (your F) just a bit over half the weight of the box.

Now here’s the tricky part. Once you’ve gotten the box to accelerate (start moving), you can relax the force H a bit so that it exactly equals H = W/2. Why? Because by keeping the net force f = ma = W – 2H = 0, acceleration settles in at a = 0 and the box is neither speeding up nor slowing down. It is then at constant velocity, which is what you specified.

Lesson here is that it takes a bit more force to get something to start moving, but once it starts to move we need to slack off a bit to maintain a constant velocity (too much force and it continues to speed up, too little and it slows down).

PS: Your question starts off with “Energy” then you talk and ask about force. They are not the same thing. I recommend you read up on the differences between energy and force. That will avoid a lot of confusion in future physics studies.

Explanation:

.

The mass of the fuel is 133 kilograms. The result is obtained by using the formula for the density.

The density is the mass of a substance per unit of volume. It can be expressed as

ρ = m/V

Where

A jet 747 is fueled with jet fuel.

Find the mass of the fuel!

We convert the units of volume and density.

V = 173.231 L

V = 173.231 dm³

V = 173.231 × 1/1000 m³

V = 0.173231 m³

ρ = 0.768 g/cm³

ρ = 0.768 × 1000 kg/m³

ρ = 768 kg/m³

Using the formula for a density, we will get the mass.

ρ = m/V

768 = m/0.173231

m = 0.173231 × 768

m ≈ 133 kg

Hence, the jet fuel has a mass of 133 kilograms.

Learn more about density here:

brainly.com/question/30297396

#SPJ4

The distance d in front of the landing site should the supplies be dropped is v√(2h/g) meter. If the horizontal velocity of the airplane is v m/s and height of the plane from the ground is h.

Horizontal velocity of the airplane = v

height of the airplane = h

Initial velocity of the food, u = 0 m/s

From the second equation of motion,

S = ut +0.5gt²

h = 0.5gt²

t = √(2h/g)

It is time taken by the food to reach the ground. in this time the horizontal distance travelled by the food is, d = v × t

d = v × √(2h/g)

d = v√(2h/g)

To know more about velocity, here

https://brainly.com/question/18084516

#SPJ4

A significant burn can happen in as little as five seconds at a hot liquid's temperature climb to 140° F.

Is the water hot at 140 degrees Fahrenheit?

A major reason to keep hot water at 120 degrees, especially if you have young children, is because hot water exceeding 140 degrees can potentially cause scorching. Scalding can have serious consequences and is more likely to happen to children and elderly people.

What is temperature?

Temperature is a measurement of how hot or cold something is on a specific scale.

What temperature causes the skin to burn?

According to studies, a full-thickness skin burn can occur at a temperature of 52 degrees Celsius (125 degrees Fahrenheit) in 2 minutes and a temperature of 54 degrees Celsius (130 degrees Fahrenheit) in 30 seconds.

Burn Exposure chart

To know more about 140 degrees Fahrenheit visit:

https://brainly.com/question/24542751

It just takes five seconds or less for a major burn to develop when a hot liquid is raised to a temperature of 140° F.

To learn more about temperature refer

https://brainly.com/question/24746268

#SPJ4

Approximate size s 700 is 29.4 m

The diffraction limit, which may be calculated using the formula = 1.22 / D, establishes the limit of the human eye's solution.

The circular aperture's mediator, D, and the wavelength are where you lick them.

The eye responds to wavelengths between 400 nm and 700 nm in our situation, where the dilated pupil has a diameter of about 8 mm = 8 10-3 m.

the formula is amended by including these values

λ = 400 nm θ = 1.22 400 10⁻⁹ / 8 10⁻³ = 6 10⁻⁵ rad

λ = 700 nm θ = 1.22 700 10⁻⁹ / 8 10⁻³-3 = 1.07 10⁻⁴ rad

The definition of radians is now: radians = s / R.

where the radius is R and s is the supported arc. For each scenario, let's identify the sarcos.

λ = 400 nm s 400 = θ R

S 400 = 6 10⁻⁵ 275

λ = 700 nm s_ 700 = 1.07 10⁻⁴ 275 10³

s 700 = 29.4 m.

The complete question is,

What is the smallest item on Earth that astronauts can see by eye when circling 275 kilometers above the planet and what is its approximate size?

To learn more about Approximate size refer to:

https://brainly.com/question/23049041

#SPJ4

The mass of one pill measured was 461 mg and for the same pill, the mass in kilograms of 100 pills will result to 46l*100/100000 => 0.046l kg.  As there are 1 ms = 10^-5 kg.

What is a pharmacy technician? A pharmacy technician is a person in pharma who decides the composition of the chemicals in medicine and the size of medicine from manufacturing.

The mass of one pill is given as 461 mg and the number of pills required is 100So the total mass will be, mass of 1 pill*100 = 461 mg × 100 = 46100mg

one kilogram = 1000 grams, so the mass in kilograms will be, The same mass in kg will be 46100mg / 1000 grams

which results in 0.046l kg.

This simply shows, the mass of 1 pill was 461 mg the mass in kilograms of 100 pills will be 0.046l kg for measurements of the mass in kg of a pill.

Learn more about pharmacy technicians: https://brainly.com/question/16934052

#SPJ4

At a half moon, this means the Suns light is falling on exactly half of the moon. So the angle must be a right angle (same as between the moon and sun, earth and sun, and earth and moon).So ,he choose the time of a half moon for calculating the earth -sun distance

The moon and the sun appear to have the same size and have the same angle of taper. He was able to determine the distance to the sun by using the right triangle that the sun made with the moon. At a distance 100,000 times closer than the Oort cloud, the Earth orbits the sun. It is only 92,955,807 miles (149,597,870 kilometres) away on average. Astronomical unit, or AU, is the name for the distance between the earth and the sun. Additionally, we utilise it to calculate distances throughout the solar system.

He calculated the angle between the Sun and a quarter-phase moon. He discovered the angle to be 87° and deduced that the Sun was between 18 and 20 times farther distant from the moon using the mathematics available at the time.

For such more questions on Aristarchus:

brainly.com/question/12689873

#SPJ4

This indicates that the moon is exactly halfway illuminated by the Sun at a full moon. The angle must therefore be a right angle (same as between the moon and sun, earth and sun, and earth and moon).

He therefore chose a half moon to calculate the Earth-Sun distance. Both the moon and the sun seem to be the same size and have a similar tapering angle. The right triangle formed by the sun, moon, and earth allowed him to calculate the distance to the sun. The distance between the Earth and the sun is 100,000 times closer than that of the Oort cloud. On average, it is only 149,597,870 kilometers (92,955,807 miles) away.

The distance between the earth and the sun is known by the abbreviation astronomical unit (AU). We also employ it to determine distances within in the solar system.

He determined the Sun's angle with a quarter-phase moon. Using the mathematics known at the time, he calculated the angle to be 87° and concluded that the Sun was between 18 and 20 times farther away from the moon.

Learn more about on Aristarchus Visit: brainly.com/question/12689873

#SPJ4

Option -C : Pressure stays the same because  it is only a function of depth .

When the diver moves horizontally, the pressure is unaffected as pressure is function of depth only.

since,

p = denisty × gravity × depth

so only depends on depth.

The molecules and atoms that make up the many layers of the atmosphere are continually moving in arbitrary directions. Despite their small size, when they hit a surface, they apply pressure that humans perceive as a force. Since molecules can flow in any direction, they can even apply air pressure to an object as they collide from below. Air pressure can be applied in all directions in the atmosphere. An object or person suspended in a fluid and moving with it experiences static pressure. The pressure that develops when a flow is isentropically slowed to zero velocity is known as the stagnation pressure. The air pressure in various environments will vary, which will have an impact on how the vehicle operates. Air is thinner at higher altitudes,

For such more questions on Pressure :

brainly.com/question/28359133

#SPJ4

Question :

a diver moves horizontally from the underside of a bridge structure (position 1) to open water (position 2). ignoring effects like currents in the water, what pressure change will the diver sense between positions?

A . pressure increases from 1 to 2 because the bridge keeps the atmosphere from pushing down on the water at position 1.

B .  pressure decreases  from 1 to 2 because the weight of the bridge pushes down on the water at position 1.

C. Pressure stays the same because  it is only a function of depth .

D. pressure  may increase or decrease  depending upon water properties like density.

When a material tends to obstruct the flow of electrons, electrical energy is converted into heat energy and light. All materials have a characteristic called electrical resistance. Ohms, or, are used to measure resistance.

The flow of electrons is in the opposite direction from the flow of current. Resistance is a conductor quality that prevents current from flowing. Electrons and ions collide as they pass across a conducting wire. The current is decreased as a result of these collisions, which convert some kinetic energy into thermal energy. The ohm is the SI unit of resistance. Regarding the movement of electrons, they naturally gravitate towards the +ve side due to their -ve charge, which is the opposite of the traditional direction of current flow (from +ve to -ve).

To learn more about resistance click here https://brainly.com/question/29427458

#SPJ4

If the Earth's sideways velocity becomes zero the Earth would still continue to orbit as before.

Sideways velocity of the earth is the rotational speed of the earth in terms of linear velocity. That is 1100 miles an hour approximately. If the sideways velocity of the earth becomes zero, objects on the earth will start flying eastward. This is due to the momentum possesses by the object on the surface of the earth. Flying of the rocks and oceans would cause the earthquakes and tsunamis. But there will not be any effect on the orbital velocity of the earth as it is governed by the gravitational force between the earth and the sun. Which ultimately depends on the masses of the sun and the earth and the distance between them.

So the correct option will be that the earth would continue to orbit as before.

To know more about sideways velocity, here

https://brainly.com/question/18737464

#SPJ4

The acceleration of this object is [tex]-8.33 m/s^2[/tex] (negative acceleration means it is slowing down).

To calculate the acceleration of an object you can use the following formula:

a = (v_f - v_i) / t

where a is acceleration, v_f is final velocity, v_i is initial velocity, and t is time.

Velocity at x = 50 km/h and velocity at y = 5.56 m/s, and the time taken to move from point x to point y is 20 seconds, so plug these values ​​into the formula to get the acceleration: can ask. :

a = (5.56 m/s - (50 km/h)*(1000 m/km)/(3600 s/h)) / 20 seconds

a = (5.56m/s - 13.89m/s) / 20s

a = -8.33m/s^2

So the acceleration of this object is -[tex]8.33 m/s^2[/tex] (negative acceleration means it is slowing down).

To know more about acceleration visit:

https://brainly.com/question/12550364

#SPJ4

An internet search to find information about the effects of electromagnetic fields on public health is highly dangerous to humans and other living organisms.

Electromagnetic fields may be defined as a combination of invisible electric and magnetic fields of force. They are typically generated by natural phenomena like the Earth's magnetic field but also by human activities, mainly through the use of electricity.

Electromagnetic fields highly impact numerous members of the public and have attributed a diffuse collection of symptoms to low levels of exposure to electromagnetic fields at home. Reported symptoms include headaches, anxiety, depression, nausea, fatigue, and loss of appetite.

Moderate to high Exposure to magnetic fields is strong enough can lead to dizziness, seeing light flashes, and feeling tingling or pain through stimulation of nerves. Exposure to radiofrequency fields that are strong enough can lead to the heating of body tissue, and result in damage to tissues and organs.

Therefore, an internet search to find information about the effects of electromagnetic fields on public health is well described above.

To learn more about Electromagnetic fields, refer to the link:

https://brainly.com/question/29221751

#SPJ4

31.08 N will be the weight of that object on mars which has a mass of 8.4 kg as the gravitational field strength is 3.7 n/kg on Mars.

As we know that weight is nothing just force a body exerts on the surface so in a similar way the weight will be mass* acceleration due to the planet(Mars in this case) (g) which is 3.7 n/kg given. So

W = mass* g

w = 8.4 * 3.7 => 31.08N

Each planet has different gravitational field strength that we call (g) in the case of earth it is calculated as 9.8 n/kg but generally, we take as 10 n/kg for simplifying the calculation, and Mars has 3.7 n/kg and moon has as just 1.4 n/kg.

Learn more about gravitational field strength: https://brainly.com/question/29433658

#SPJ4