If 22.5 L of nitrogen at 748.3 mm Hg is changed to a pressure of 1294.6 mm Hg at constant
temperature. What is the new volume?

Answers

Answer 1

Answer:

it down their!!!!!!!!!!1

Explanation:

The new volume  

=

23.2

L


Related Questions

How much heat is required to increase the temperature of 150 g of water from
38°C -55°C?

Answers

Answer:

-55°C

Explanation:

Bwcause 38°C is gonna make it colder so thats why you should use that.

HELPP
explain the difference between molecular and empirical formulas. Which types of compounds are described by the terms formula mass and molecular mass. Use an example to show the steps in calculating the formula mass for K2CO3

Answers

Answer:

In the previous section, we discussed the relationship between the bulk mass of a substance and the number of atoms or molecules it contains (moles). Given the chemical formula of the substance, we were able to determine the amount of the substance (moles) from its mass, and vice versa. But what if the chemical formula of a substance is unknown? In this section, we will explore how to apply these very same principles in order to derive the chemical formulas of unknown substances from experimental mass measurements.

Explanation:

tally. The results of these measurements permit the calculation of the compound’s percent composition, defined as the percentage by mass of each element in the compound. For example, consider a gaseous compound composed solely of carbon and hydrogen. The percent composition of this compound could be represented as follows:

\displaystyle \%\text{H}=\frac{\text{mass H}}{\text{mass compound}}\times 100\%%H=

mass compound

mass H

×100%

\displaystyle \%\text{C}=\frac{\text{mass C}}{\text{mass compound}}\times 100\%%C=

mass compound

mass C

×100%

If analysis of a 10.0-g sample of this gas showed it to contain 2.5 g H and 7.5 g C, the percent composition would be calculated to be 25% H and 75% C:

\displaystyle \%\text{H}=\frac{2.5\text{g H}}{10.0\text{g compound}}\times 100\%=25\%%H=

10.0g compound

2.5g H

×100%=25%

\displaystyle \%\text{C}=\frac{7.5\text{g C}}{10.0\text{g compound}}\times 100\%=75\%%C=

10.0g compound

7.5g C

×100%=75%

Which of the following solutions represents a good buffer system? a solution that is 0.10 mol L-1 NaOH and 0.10 mol L-1 KOH a solution that is 0.10 mol L-1 HCl and 0.10 mol L-1 NH4+ a solution that is 0.10 mol L-1 HF and 0.10 mol L-1 CH3COONa a solution that is 0.10 mol L-1 HCl and 0.10 mol L-1 KCl a solution that is 0.10 mol L-1 CH3COOH and 0.10 mol L-1 CH3COOLi

Answers

Answer:

chu papi

Explanation:

4. The half-life of C-14 is 30 years. If a scientist had 100.0 g at the beginning, how
many grams would be left after 120 years has elapsed?
Half Lives
0
1
2
Time (years)
Amount (grams)
Show table

Answers

Answer:

6,25 gm

Explanation:

4. The half-life of C-14 is 30 years. If a scientist had 100.0 g at the beginning, how

many grams would be left after 120 years has elapsed?

10 years would be 120/30 = 4 half lives0

s0 the fraction of c-14 left would be four (1/2) multiplied together

1/2 X 1/2 X 1/2 X 1/2 = 1/16

SO 1/16 OF THE 100.0 gm would be left

100.0/16  = 6,25 gm

What do we call the repeating units of a larger molecule?

Answers

Answer:

Brainlest

Explanation:

A polymer is a molecule made up of repeating units. These units, called “monomers”, form a long molecular chain. It might have branches, or it might just be one straight line of molecules, each connected in the same way. A monomer of polyethylene

agine that you are just outside the International Space Station (ISS) orbiting Earth, working in space. You brought your speaker with you so you could listen to some music while you work. You find the right song, and you hit play. What do you hear? Write your response below in complete sentences. 3) Include the answers to these questions in your response: • Would you hear your music? • Why or why not?

Answers

Answer:

There is no atmosphere outside the space station, so there is nothing to vibrate, therefor there is no sound.you better install your earphones in your space suit.

Explanation:

Imagine that you are just outside the International Space Station (ISS) orbiting Earth, working in space. You brought your speaker with you so you could listen to some music while you work. You find the right song, and you hit play. What do you hear? Write your response below in complete sentences.

Include the answers to these questions in your response: •

Would you hear your music? •

Why or why not?

You need matter that can vibrate and finally vibrate your ear drum in order to transmit sound waves. that you hear

There is no atmosphere outside the space station, so there is nothing to vibrate, therefor there is no sound.you better install your earphones in your space suit.

You will hear no music as there is no sound in the space because there are no molecules to vibrate.

Why no sound in the space?

Sound is generally considered a form of energy that consists of mechanical waves which travel in a medium. Sound is produced by a vibrating body which generates a disturbance in the medium and the medium helps to propagate the sound.

The medium of sound transmission is air where the molecules in the air are in the form of longitudinal waves. The vibrating body generates a disturbance in the rarefaction and compression of waves. The disturbance of the particles of the surrounding medium produces sound.

Sound always requires a medium to be traveled and reach its destination. As space does not have any medium for sound to generate disturbance. Space has a vacuum due to which sound cannot be heard in space.

Therefore, you will hear no music when you play a song in the space.

Learn more about sound, here:

https://brainly.com/question/14109969

#SPJ2

PLEASE HELP
1. A closed bottle contains a mixture of Ar and O2 at 25.3°C. If the partial pressure of Ar in
the bottle is 0.447 atm and the total pressure of the bottle is 1.024 atm, what is the partial
pressure of O2 in the bottle?

Answers

Answer: 0.79 atm

Explanation:

The Ideal Gas Law is PV=nRT.

since both Ar and O2 have the same volume and temperature, the only variable causing the differnce in pressure betwwen the 2 gases is the number of moles

the total pressure = the partial pressure of Ar + the partial  pressure of O2

1.024 atm = 0.447 amt + ?

so  

? = 1.24 -0,447 = 1.24 - 0.45= 0.79 atm

the total pressure of the bottle is 1.024 atm, what is the partial

pressure of O2 in the bottle? is PV

How are sound and light similar? How are they different?

Answers

They are
Both forms of energy that travels in waves

They are different because:
Sound is a mechanical wave
Light is a transverse wave
Light is way faster
Sound has to travel through a medium (substance) but light is electro magnetic (meaning it doesn’t need to travel through anything and it can travel a vacuum e.g light travel in space)

Answer:

Sound requires a medium to move through; light does not.

Sound and light are similar in that both are forms of energy that travel in waves.

Explanation:

Sound and light are similar in that both are forms of energy that travel in waves. They both have properties of wavelength, freqency and amplitude. Sound can only travel through a medium (substance) while light can travel through empty space. Sound is a form of mechanical energy caused by vibrations of matter.

Light waves DO NOT require a medium, they travel fastest in empty space; Sound waves REQUIRE a medium, they travel fastest in dense material like solids. Sound is a longitudinal wave.

The table below provides data about a gas sample. Which of the following can be determined using the data?
Volume 2.0 L
Pressure 3.6 atm
Temperature 323 K
the chemical composition of the gas
the condensation temperature of the gas
the number of moles in the sample
the distance between gas molecules in the sample

Answers

Explanation:

Tabel di bawah ini memberikan data tentang sampel gas. Manakah dari berikut ini yang dapat ditentukan dengan menggunakan data? Volume 2,0 L Tekanan 3,6 atm Suhu 323 K komposisi kimia gas suhu kondensasi gas jumlah mol dalam sampel jarak antar molekul gas dalam sampel

Explanation:

....

해바라기해바라기해바라기해바라기

dentify the parts of the atom that are labeled in the diagram.

Answers

Answer:

Our current model of the atom can be broken down into three constituents parts – protons, neutron, and electrons. Each of these parts has an associated charge, with protons carrying a positive charge, electrons having a negative charge, and neutrons possessing no net charge.

Help please With this :)))

Answers

Answer: 3

Explanation:

(50 POINT) use this to answer: https://phet.colorado.edu/sims/html/acid-base-solutions/latest/acid-base-solutions_en.html

Describe how you could adjust the settings of the simulation to increase the number of red (H3O+) and blue (A-) particles in the solution of equilibrium. In three to four sentences, justify your answer and explain how and why this would change the pH of the solution.

Answers

The addition of more acid or base will increase the number of H3O+ and A- particles thereby decreasing and increasing the pH of the solution respectively.

What is an acid-base titration?

An acid-base titration is one in which an acid is added to a given volume of base in order to neutralize it.

When more of acid is added to a solution of a base than is required to neutralize it, the solution becomes acidic.

Similarly, when more base is use to neutralize an acid than is required, the solution becomes alkaline.

In the given simulation, (H3O+) is the acid while (A-) is the base.

By adding increasing the quantity of acid added, the number of H3O+ particles will increase. This will reduce the pH of the solution.

Also, the adding more base to the solution, the number of A- particles in the solution will increase. This will increase the pH of the solution.

Therefore, addition of more acid or base will increase the number of H3O+ and A- particles thereby decreasing and increasing the pH of the solution respectively.

Learn more about acid-base titration at: https://brainly.com/question/3508933

For the formula shown, how many sulfur atoms are represented?

Answers

Answer:

Your answer would be 6

Answer:

1 it is 1

Explanation:

I will give brainlist

How much Ba(OH)2, in grams, is needed to make a 1.00m aqueous solution?

Answers

Answer:

We can say that we need 171 g barium hydroxide needed to make one model equals solution.

Explanation:

I hope this answered your question.

171 gram of  Ba(OH)2, in grams, is needed to make a 1.00 m aqueous solution.

What is mass?

Mass is the quantity of matter. The mass is calculated by the density divide by the volume.

In 1.00 solution, the mass of Ba(OH)2 is 171 gram.

Thus, the mass of Ba(OH)2 is 171 gram.

Learn more about mass

https://brainly.com/question/19694949

#SPJ2

Hey :3 please help with this. Will mark brainlist if you’re right

Answers

Answer: 4

Explanation:

identify key concept/terminologies about solution or concentration of solution?

pls help me

thanks~​

Answers

Answer :

[tex] \: [/tex]

Concentration of Solutions

Recall that a solution consists of two components: solute (the dissolved material) and solvent (the liquid in which the solute is dissolved). The amount of solute in a given amount of solution or solvent is known as the concentration. The two most common ways of expressing concentration are molarity and molality.

Molarity

The molar concentration (M) of a solution is defined as the number of moles of solute (n) per liter of solution (i.e, the volume, V solution):

M = n / V solution

The units of molarity are mol/L, often abbreviated as M.

For example, the number of moles of NaCl in 0.123L of a 1.00M solution of NaCl can be calculated as follows:

[tex]0.123 \: l \: \: of \: solution \: \times \: \frac{1.00 \: mole}{1.00 \: l \: of \: solution \: } \: \\ = 0.123 \: moles[/tex]

Molality :

The molal concentration (m) of a solution is defined as the number of moles of solute (n) per kilogram of solvent (i.e., the mass of the solvent, msolvent):

[tex]m = \frac{n}{v \: solution} [/tex]

For example, the number of moles of NaCl dissolved in 0.123kg of H2O (the solvent), in order to make a 1.00m solution of NaCl, can be calculated as follows:

[tex]0.123 \: kg \: of \: solvent \: = \frac{1.00 \: mole}{1.00 \: kg \: of \: solvent \: } \\ = 0.123 \: moles[/tex]

PLEASE ANSWER ASAP!!!
The movement of tectonic plates in two different locations is shown below:

Two blocks labeled Location A and Location B are shown. The block labeled A has a vertical line in the middle. On the left of the line there is an arrow pointing down. On the right of the vertical line there is an arrow pointing up. At Location B the top layer of the block shows two horizontal arrows pointing towards each other. The portion of this block on the right is shown moving down.
Which statement is most likely true?

Subduction occurs in both locations.

The magnetic orientation of rocks may change in Location A and subduction occurs in Location B.

Subduction occurs in Location A and the magnetic orientation of rocks may change in Location B.

Answers

Answer: its a and b

Explanation:its very simple and the reason is bc yea

Answer:

B

Explanation:

The answer is B because it said subduction i guess. And I got it right! Hope this helps to anyone that is looking at this!

What is epoxy?
………………..

Answers

Answer:

Epoxy is the family of basic components or cured end products of epoxy resins.


Any of a class of adhesive plastics or other materials that are polymers of epoxides

A 32.1 mole sample of gas has a temperature of 21 Celsius and a pressure of 2280.0 torr. What is the volume of the gas?

Answers

The volume of the gas is 27 ml

The calculation can be done as follows

The first step is to convert the pressure to atm

convert 2280 tors to atm

760 tors= 1 atm

= 2280/780

= 3 atm

The formula is

PV= nRT

The next step is to write out the parameters

Pressure= 3 atm

Temperature= 21 °C

no of moles= 32.1 mole

volume= ?

(r)constant= 8.314

3 × v= 32.1×8.314×21

3v= 81.080

V= 81.080/3

V= 27 ml

Hence the volume of the gas is 27 ml

Please see the link below for more information

https://brainly.com/question/15568262?referrer=searchResults

True or false?

Increasing the temperature can help slow down chemical reactions by "burning away" unnecessary molecules

Answers

True because increasing the temperature it gets hotter

Very easy science 5th grade WILL MARK As brain list if owned by today

Answers

Answer:

A

Explanation:

According to the chart, A tv turns into heat, light, and sound energy.

Which one of the following salts has the highest molar solubility in water?

Answers

Answer:

Correct option is

C

Ag

2

CO

3

; K

sp

=6.2×10

−12

(A) For CaCO

3

,S=

Ksp

=

8.7×10

−9

=9.3×10

−5

M

(B) For CuS,S=

Ksp

=

8.5×10

−45

=9.2×10

−23

M

(C) For Ag

2

CO

3

,S=(Ksp/4)

1/3

=(6.2×10

−12

/4)

1/3

=1.15×10

−4

M

(D) For Pb(IO

3

)

2

,S=(Ksp/4)

1/3

=(2.6×10

−13

/4)

1/3

=4×10

−5

M

Hence, Ag

2

CO

3

has the greatest molar solubility in pure water.

What is inertia?(1 point)


A. a force that acts on an object at rest


B. the motion of an object


C. an object’s resistance to a change its motion


D. the speed and direction of an object in motion

Answers

Answer:

I think it's C. hope this helps:)

Calculate the amount of energy That an obsect Can absorb from Yellow light Whose wave length is 589 nm.​

Answers

Explanation:

E = hf

c= f × lamda

f= c/ lamda

c= speed of light

f= frequency

lamda = wavelength

E = h c/ lamda

E = 6.626 × 10^-34 Js × 3 × 10^8 ms-1 / 589 × 10^-9 m

= 3.37 × 10^15 J

What happens to iron in a bolt as the bolt rusts?
A. It undergoes a chemical change.
O B. It undergoes a physical change
O C. The mass of the atoms decrease
O D. It changes into a different element.
a

Answers

Answer:

it undergoes a chemical change

list several characteristics of ligroin​

Answers

- Petroleum fraction consisting mostly of [tex]C_{7}[/tex] and [tex]C_{8}[/tex] hydrocarbons

- The fraction is also called heavy naphtha

- Boiling in the range 90‒140 °C

- Ligroin is used as a laboratory solvent

- Ligroin it also esed as a motor fuel or as a solvent for fats and oils in dry cleaning

         [] All of these are different characteristics of ligroin​

         [] If you need more let me know  

Have a nice day!

     I hope this is what you are looking for, but if not - comment! I will edit and update my answer accordingly. (ノ^∇^)

- Heather

Ethanol (C₂H₆O) is combusted in air according to the following reaction: C₂H₆O(l) + O₂(g) → CO₂(g) + H₂O(l) How many moles of water would be produced by the complete combustion of 44.5 grams of ethanol in the presence of excess oxygen?

Answers

2.89 moles of water would be produced by the complete combustion of 44.5 grams of ethanol in the presence of excess oxygen.

According to this question, the following reaction between ethanol and oxygen is given:

C₂H₆O(l) + O₂(g) → CO₂(g) + H₂O(l)

However, this equation is not balanced. The balanced equation is as follows:

C₂H₆O + 3O₂ → 2CO₂ + 3H₂O

According to this equation, 1 mole of ethanol produces 3 moles of water.

We convert 44.5g of ethanol to moles by dividing by its molar mass as follows:

mole = 44.5g ÷ 46.07g/mol

mole = 0.966mol of ethanol

If 1 mole of ethanol produces 3 moles of water.0.966mol of ethanol will produce (0.966 × 3) = 2.89mol

Therefore, 2.89 moles of water would be produced by the complete combustion of 44.5 grams of ethanol in the presence of excess oxygen.

Learn more at: https://brainly.com/question/21085277?referrer=searchResults

Calculate the mass of 5.3 moles of chloric acid (HClO3). Explain the process or show your work by including all values used to determine the answer.

Answers

Answer:

447.64 grams

Explanation:

To find the mass when given moles, it is a pretty simple process.

I start by finding the molar mass of chloric acid, which comes out to 84.46 grams/mol. To find the MM (molar mass), you just take the mass of each element in the molecule from the periodic table and add them all together.

After this, you set up the equation by taking the moles given and multiplying it by the molar mass. This gives you the new value in grams (since we cancelled out the moles). I have attached my work below.

I hope this helps! :^)

The mass of 5.3 moles chloric acid has been 447.85 g.

The mass of 1 mole of a compound has been equivalent to the molar mass of the compound. The molar mass of a compound has been the sum of the constituent atoms in a formula unit.

The molar mass (mwt) of chloric acid has been given as:

[tex]mwt=m_H\;+\;m_C_l\;+\;(m_O\;\times\;3)[/tex]

By substituting the values for the mass of constituent atoms, the molar mass has been given as:

[tex]mwt=1\;+\;35.5\;+\;16\;\times\;3\\mwt=36.5\;+\;48\\mwt=84.5[/tex]

The molar mass of chloric acid has been 84.5 g/mol.

The mass of 1 mole of chloric acid has been 84.5 g/mol. The mass of 5.3 moles chloric acid has been:

[tex]\rm 1\;mol=84.5\;g\\5.3\;mol=5.3\;\times\;84.5\;g\\5.3\;mol=447.85\;g[/tex]

The mass of 5.3 moles chloric acid has been 447.85 g.

For more information about molar mass, refer to the link:

https://brainly.com/question/12127540

A chemical reaction occurs when _________.

A. Chemical Bonds are build
B. A new substance is created
C. Chemical Bonds are broken
D. All of the Above

Answers

Answer:

C. Chemical Bonds are broken

Explanation:

A chemical reaction occurs when chemical bonds are broken.

Chemical reactions occur when chemical bonds between atoms are formed or broken.

Hope this helps :)

Answer:

c: chemical bonds are broken

Explanation:

the broken bonds then create new bonds, rearranging the atoms into a new substance :)

4. A student performs four trials of an investigation to determine the boiling point of water. How should the student handle the results?
A. The student should take the average of the minimum and maximum value of the results.
B. The student should use the value that is closest to 100ºC.
C. The student should use the maximum value of the results.
D. The student should take the average of the results from all four trials.

Answers

Answer:

i think its D

Explanation:

In order to get maximum accuracy, student should take average of results from all four trials.

What is accuracy?

Accuracy  in terms of chemistry can be defined as to how close a measurement is to the true value.There are three types of accuracy:

1) Point accuracy-It means accuracy is present at that point of scale only.It does not give any information about the accuracy of the instrument.

2)Percentage of true value--It is the accuracy  which is determined by identifying accuracy of the instrument  and comparing it with the measured true value.

3)Percentage of scale range- It is the accuracy  which determines accuracy of the measurement.

Accuracy in case of instruments  is neglected up  to ±0.5 percent.Accuracy of measurements can be increased by taking multiple measurements and taking into account human errors.

Learn more about accuracy,here:

https://brainly.com/question/15276983

#SPJ2

Other Questions
hidden figures, 9. What kind of accomplishment was it for Katherine and the workers of Langley for the Eagle to land safely during the Apollo mission on the surface of the moon What is the main idea of this passage??? Plz help me!! Cornelius and Caspi (1987) argued that standard intelligence tests are not appropriate measures of adult intelligence. They compared younger and older adults on traditional intelligence tasks, as well as on a every day problem solving inventory. As discussed in lecture, Cornelius and Caspi (1987) found that: Read the passages "Alvin Ailey," "The Alvin Ailey AmericanDance Theater," and "How to Become a Dancer orChoreographer," and answer the questions that follow. Make sureyou answer all of the questions. How did the Double V campaign change some white people's perspective about African Americans?O A.Their perspective led to further racism as most Black soldiers were not put into combat positions.B. They began to accept them into society because they were fighting in the war..Their perspectives stayed the same since people refused to acknowledge Black soldiers' contributions.OD. They began to view them as equals since they were fighting for the same cause. what happens to the particles of a solid as it becomes a liquid 14. Which of the following is true of the nucleus? (a) The nucleus is considered the control center of the cell. (b) The nucleus contains all the cells DNA. (c) All cells have a nucleus. (d) all of the above In a 30 minute show 12 minutes of airtime are spent on commercials. Determine what percent of the television show air time is spent on commercial HELP ME OUT PLEASE!! For the formula shown, how many sulfur atoms are represented? O 1 O 2 O 4O 6 Four subtracted from x is less than 18. which of the following does not require the use of chain rule to find dy/dx. true or false A risk factor can be defined as anything that increases the likelihood of injury or disease. A postpartum woman is being discharged with anticoagulant therapy for treatment of deep vein thrombosis. After teaching the woman about this therapy, the nurse determines that the teaching was successful based on which statement Jamie and Raul both work at the Pizza House. Together, they work a total of 15 hours per week. Raul works 3 more than twice the hours as Jamie. How many hours does Jamie work per week?Enter your answer in the box. which two rivers form much of the border between minnesota and wisconsin? Pls help me with this French assignments .. each of the questions has multiple choice.. Pls choose from the multiple choice below to answer the questions. 1.) : (a)prend (b) bois.2.): (a)prenez (b) boivent 3.): (a)prenez (b) boit4.): (a)prennent (b) prends 5.): (a)boit (b) buvons While designing a management support system, it's important to remember that executives' main concern is _____. HELP ITS TIMED AND IM STUCK ONE THIS QUESTION When the price of a normal good rises, the income effect results in ________ in the quantity demanded and the substitution effect results in ________ in the quantity demanded. how many words are there in the pledge of allegiance?