Identify three sources of point-source pollution.

Answer:

b.location in the sky (If the question is saying:The H-R diagram is useful in

studying all of these about a star except for)

Explanation:

The theoretical HR diagram plots the temperature of the star vs their luminosity (brightness) and the observational HR diagram plots color of the stars vs the absolute magnitude. Depending on mass, stars will also go through specific evolutionary stages that can be seen through the location of the star on the HR diagram. However, the HR diagram will not have data on the location of the star in the sky.

Answer:

To separate the components, a water wash may be attempted to remove benzoic acid, but benzoic acid is not particularly water-soluble due to its nonpolar aromatic ring, and only small amounts would be extracted into the aqueous layer

The method that can be used to separate Benzoic acid and potassium carbonate is :  The application of water wash separation method

Benzoic acid is slightly soluble in cold water but becomes more soluble as the temperature of water is increased. Water wash separation method is a methodology used for the selective removal of unwanted compounds in a mixture.

The separation of benzoic acid and potassium carbonate is based on the solubility differences between Benzoic acid and potassium carbonate when dissolved in a solvent ( water ) therefore the water wash separation method is the most effective method.

Hence we can conclude that The method that can be used to separate Benzoic acid and potassium carbonate is :  The application of water wash separation method.

Learn more about separation methods :  https://brainly.com/question/735172

Answer:

Molar mass of H2CO3 : 62.03 g/mol

Answer:

Final Temp = 23.92°C

Explanation:

ΔH(total) = (m·c·ΔT)ice + (m·ΔH(f))melt'g + (m·c·ΔT)water

2182.5j = (5g)(2.092j/g·°C)(1°C) + (5g)(334.56j/g) + (5g)(4.184j/g·°C)(ΔT)

(2182.5 - 10.46 - 1672.8)j = 20.92j/°C·ΔT

ΔT = (2182.5 - 10.46 - 1672.8)j / 20.92j/°C = 23.92°C

Since the melting ice starts and ends at 0°C and is then warmed to 23.92°C then the temperature change is also the final temp of the water based upon given energy input values.

Answer:

Metallic Bonding

Explanation:

Conductivity occurs when electrons or ions are free moving. The conductivity in metals is due to electrons being delocalized in a sea of electrons. Metals contain metallic bonding which allows the electrons to freely move.

Malleability happens when adjacent layers of positive ions move relative to one another while being in contact with the sea of electrons from the metallic bonding.

Answer:

They can be separated by physical methods.

Explanation:

Substances in a mixture are not subjected to anything that may change their chemical structure, so they are physical all throughout the process. Therefore, they can be separated using physical methods.

Answer:

They can be separated by physical methods.

Explanation:

I took the final

The electronic configuration is used to explain the orbitals of an atom and it helps to determine the physical and chemical properties of the elements. The electronic configuration of zinc is 1s²2s²2p⁶3s²3p⁶4s²3d¹⁰. The correct option is C.

The distribution of electrons in the atomic orbitals is given by the electronic configuration. It is a standard notation in which all the electrons holding atomic subshells are arranged in a sequence. Each element has a unique electronic configuration.

The electronic configuration of an element can be written in two ways, in standard notation, and in condensed form. In the case of elements with larger atomic numbers, the electronic configuration becomes lengthy in standard notation. So in such cases condensed form is generally used.

In condensed form electronic configuration of zinc is [Ar] 3d¹⁰4s² and in standard form it is 1s²2s²2p⁶3s²3p⁶4s²3d¹⁰.

Thus the correct option is C.

To know more about electronic configuration, visit;

https://brainly.com/question/19589767

#SPJ7

Answer:

it is A striations

Explanation:

..........

Answer:

Striation

Explanation:

Answer:

I = 1.23 A

Explanation:

Given that,

The resistance of the lightbulb, R = 96.8 Ω

Voltage, V = 120 V

We need to find the current flows through the lightbulb. Let the current be I. We can use the ohm's law to find it i.e.

[tex]V=IR\\\\I=\dfrac{V}{R}\\\\I=\dfrac{120}{96.8}\\\\I=1.23\ A[/tex]

So, the current flows through the bulb is 1.23 A.

We convert the masses of our reactants to moles and use the stoichiometric coefficients to determine which one of our reactants will be limiting.

Dividing the mass of each reactant by its molar mass:

(10 g C2H6)(30.069 g/mol) = 0.3326 mol C2H6

(10 g O2)(31.999 g/mol) = 0.3125 mol O2.

Every 2 moles of C2H6 react with 7 moles of O2. So the number of moles of O2 needed to react completely with 0.3326 mol C2H6 would be (0.3326)(7/2) = 1.164 mol O2. That is far more than the number of moles of O2 that we are given: 0.3125 moles. Thus, O2 is our limiting reactant.

Since O2 is the limiting reactant, its quantity will determine how much of each product is formed. We are asked to find the number of grams (the mass) of H2O produced. The molar ratio between H2O and O2 per the balanced equation is 6:7. That is, for every 6 moles of H2O that is produced, 7 moles of O2 is used up (intuitively, then, the number of moles of H2O produced should be less than the number of moles of O2 consumed).

So, the number of moles of H2O produced would be (0.3125 mol O2)(6 mol H2O/7 mol O2) = 0.2679 mol H2O. We multiply by the molar mass of H2O to convert moles to mass: (0.2679 mol H2O)(18.0153 g/mol) = 4.826 g H2O.

Given 10 grams of C2H6 and 10 grams of O2, 4.826 g of H2O are produced.

Answer:

0.0308 mol

Explanation:

In order to convert from grams of any given substance to moles, we need to use its molar mass:

Now we calculate the number of moles of KAI(SO₂)₂ contained in 5.98 g:

Answer:

p wave

Explanation:

The P wave is designated the primary preliminary wave because it is the first to arrive at a seismic station after an earthquake. It travels at a speed usually less than 6 kilometers per second in the Earth's crust and jumps to 13 kilometers per second through the core.

Answer:

Blank 1: 1

Blank 2: 2

Blank 3: 1

Blank 4: 1

Explanation:

Assuming this is to balance the equation, write out the amount of each element you have on the reactants side and on the products side

Reactants                                                   Products

Ca 1                                                             Ca 1

C 2                                                              C 2

H 2                                                              H 4

O 1                                                               O 2

Comparing the two, we can see that hydrogen and oxygen have different amounts between reactants and products. Therefore, we need to multiply by some number to get the two equal. If we multiply the reactants by 2 we will get the correct amount in the products. So we put a 2 in front of the H₂O to signify this.

The balanced chemical reaction is

CaC₂ + 2 H₂O --> C₂H₂ + Ca(OH)₂

Answer:

Explanation:

a is a physical change you could put the peices back together

b is a chemical change because you cant unburn wood  

c is a chemical change because you cant unbake it

d is a physicl change you could te your time and unmix it

Answer:

amylase

Explanation:

Two different forms of a single gene are called 'alleles

Answer:

There are 5 steps/rules of the ideal gases based on kinetic theory.

Explanation:

1. Particles in a gas are constant moving in random motion.

2. combined volume of the particles is negligible.

3. particles exert no forces on one another

4. any collisions between the particles are completely elastic

5. the average kinetic energy of particles is proportional to temperature in kelvins.

(I had help explaining steps from Sal Khan. I hope this helps! Have a great day!)

Answer:

a) pH = 13.447

b) pH = 13.176

Explanation:

Ba (OH)₂ is a strong base and ionizes completely in solution to give barium amend hydroxide ions.

The equation of the dissociation of Ba(OH)₂ is given below:

Ba(OH)₂ ----> Ba2+ + 2OH-

1 mole of Ba(OH)₂ produces 2 Moles of OH- ions

a) Before the addition of HCl, i.e.,when 0.00 mL of HCl has been added;

Concentration of hydroxide ions, [OH-] = 0.140 x 2 = 0.a) [OH-] = 0.100 x 2 = 0.280

pOH = -log [OH-]

pOH = -log (0.280)

pOH = 0.553

pH = 14 - 0.553= 13.447

b) pH when 15.0 mL HCl has been added

Moles Ba(OH)₂ = concentration × volume

Volume of Ba(OH)₂ = 82.0 mL = 0.082 L, concentration = 0.140 M

moles of Ba(OH)₂ = 0.082 x 0.140 = 0.01148 moles

moles OH- produced by 0.01148 moles of Ba(OH)₂ = 2 x 0.01148= 0.02296

moles HCl = 0.0150 L x 0.560 = 0.0084

moles of H+ produced by 0.0084 HCl = 0.0084

0.0084 H+ willnreact with 0.0084 moles of OH-

moles OH- left after the reaction = 0.02296 - 0.0084 = 0.01456 moles

total volume of new solution = (82 +15) mL = 97 mL => 0.097 L

Concentration of OH- ions = moles / volume

[OH-] = 0.01456 / 0.097 = 0.1501

pOH = -log [OH-]

pOH = -log (0.150)

pOH = 0.824

pH = 14 - 0.824

pH = 13.176

Answer: 824.6 g of NaCl are produced from 500.0 g of chlorine.

Explanation:

To calculate the moles :

[tex]\text{Moles of solute}=\frac{\text{given mass}}{\text{Molar Mass}}[/tex]  [tex]\text{Moles of} Cl_2=\frac{500.00g}{71g/mol}=7.04moles[/tex]

[tex]2Na+Cl_2\rightarrow 2NaCl[/tex]  

According to stoichiometry :

1 mole of [tex]Cl_2[/tex] produce = 2 moles of [tex]NaCl[/tex]

Thus 7.04 moles of [tex]Cl_2[/tex] will produce=[tex]\frac{2}{1}\times 7.04=14.08moles[/tex]  of [tex]NaCl[/tex]

Mass of [tex]NaCl=moles\times {\text {Molar mass}}=14.08moles\times 58.5g/mol=824.26g[/tex]

Thus 824.6 g of NaCl are produced from 500.0 g of chlorine.

Answer:

the youngest crust of the ocean floor can be found near the seafloor

Answer:

better mileage on cars, took lead out of paint, smaller packaging like for delivery and store products, EPA laws updating

Answer:

Reducing pollution from transportation sources has led to healthier air for Americans. In cities, smog has been visibly reduced.

Explanation:

i hope this helped

Answer:

400ml

Explanation:

9 mol H₂O

Math  

Pre-Algebra  

Order of Operations: BPEMDAS  

Chemistry  

Atomic Structure  

Stoichiometry  

Step 1: Define

[RxN - Balanced] 6H₂ + O₂ → 3H₂O

[Given] 18 mol H₂

[Solve] mol H₂O

Step 2: Identify Conversions

[RxN] 6 mol H₂ → 3 mol H₂O

Step 3: Stoich

Answer:

9 mol H₂O

give me brainliest pls

Answer:

the acid used to neutralize the base in oder to form a salt and water

Answer:

(-1,0)

Explanation:

Answer:

D. 108 grams/100g of H2O

Explanation:

I found the line KNO3 and when the line is at x value 60, it has the y value 108

id.k how to explain it it's just on the graph, ig just look at where it intersects both values

hope this helps

Answer:

.11 mol

Explanation:

Convert mmHg to atms by dividing by 760. Then multiply 6.3 by the atms and divide by .08206*(273+28) to get mol

Answer:

1 (NH4)2SO4 + Ba(NO3)2 → NH4NO3 + BaSO4

2 (NH4)2SO4 + Ba(NO3)2 → Ba(SO4) + (NH4)(NO3)

Explanation: