The heat gained or lost by the calorimeter, q cal, is determined from the formula, qcal = Ccal×Δt, where Δt is the change in temperature undergone by the mixture.
What is the definition of calorimetry?Calorimetry is the study or practice of monitoring changes in a body's state variables for the goal of determining the heat transfer associated with those changes, such as those brought on by chemical reactions, physical changes, or phase transitions, within certain bounds.
How do you calculate calorimetry?q = msp heatt, where q = heat quantity, expressed in joules (J). 1 degree C Mass, expressed in grams, is K. m. t = °C or K of temperature change. The amount of heat needed to increase the temperature of a specified quantity of a substance by one degree is known as the heat capacity, or C, of the substance.
learn more about calorimetry visit :
https://brainly.com/question/1407669
#SPJ4
a 25.0 ml solution of hbr is neutralized with 16.8 ml of 0.105 m sr(oh)₂. what is the concentration of the original hbr solution?
The concentration of the original hbr solution is 0.147m.
How do you make HBr solution?
Distillation of a solution of sodium bromide or potassium bromide with phosphoric acid or sulfuric acid yields HBr: KBr + H2SO4 KHSO4 + HBr Because it oxidises HBr to bromine, concentrated sulfuric acid is less effective: 2 HBr + H2SO4 + 2 H2O Br2 + SO2 + 2 H2O
2Hbr + sr(oh)₂ --> srbrc + 2h₂0
25ml 16.8 ml
xm 0.105 m
for complete neutralization
Moles of Hbr =2× moles of sr(oh)₂
xm × 25ml = 2 × 16.8 ml × 0.105 m
x = 0.147m
Hence 0.147m is a correct answer.
To know more about HBr solution follow link
https://brainly.com/question/10662366
#SPJ4
The ionic compounds NaCl and MgS are represented by the diagrams above. Which statement correctly identifies diagram 1 and identifies the compound with the lower melting point, explaining why?
A
Diagram 1 represents NaCl
NaCl
; it has a lower melting point than MgS
MgS
has because the coulombic attractions between the singly charged Na+
Na
+
ions and the Cl−
Cl
−
ions in NaCl
NaCl
are stronger than those between the ions in MgS
MgS
.
B
Diagram 1 represents NaCl; it has a lower melting point than MgS because the coulombic attractions between its singly charged Na+
ions and the Cl−
Cl
−
ions are weaker than those between the ions in MgS
MgS
.
C
Diagram 1 represents MgS
MgS
; it has a lower melting point than NaCl
NaCl
because the coulombic attractions between its doubly charged Mg2+
Mg
2
+
ions and the S2−
S
2
−
ions are stronger than those between the ions in NaCl
NaCl
.
D
Diagram 1 represents MgS
MgS
; it has a lower melting point than NaCl
NaCl
because the coulombic attractions between the doubly charged Mg2+
Mg
2
+
ions and the S2−
S
2
−
ions are weaker than those between the ions in NaCl
NaCl
B
The magnesium sulfide having a weaker coulombic interaction would have a lower melting point. Option D
What is the correct image?We know that a substance is said to be ionic if the substance is formed by the interaction of two ions. We know that one of the ions must be positive and the other must be negative. The magnitude of the charges would have an impact on the nature of the interaction between the charges.
Since we know that magnesium sulfide has a double negative charge on sulfur and a double positive charge on magnesium while the sodium has a single positive charge and the chloride has a single negative charge, the magnitude of the interaction between the sodium and the chloride ions is higher thus the magnesium chloride compound shown in image 1 would have a lower melting point.
Learn more about melting point:https://brainly.com/question/29578567
#SPJ1
assume the equivalent weight of an acid is 94.0.94.0. calculate the number of ml of 0.353 m0.353 m naohnaoh that would be needed to titrate 0.223 g0.223 g of the acid.
The volume required for titration of NaOH is 0.000837ml.
Given -M=94g
m=0.223g
V=0.353
To find the new volume consider following points -
The most frequently used phrase in chemistry and one of the fundamental ideas in the physical chemistry section is "equivalent weight." The definition of an equivalent weight, also referred to as a gram equivalent, is the mass of one equivalent, or the mass of a given substance that will combine with or replace a specific amount of another substance. To put it another way, the mass of a substance that can displace 1 point 008 grams of hydrogen, 8 point 0 grams of oxygen, or 35 point 5 grams of chlorine is known as its gram equivalent or equivalent weight. As a result, the atomic weight of the substance is divided by its valence to determine the equivalent weight. As an illustration, the oxygen's equivalent weight will be 16 g / 2 = 8 g.Calculations-
[tex]MV=mv\\\\94V=0.223 *0.353\\\\V=\frac{0.223 *0.353}{94} ml\\\\V=0.000837ml[/tex]
To learn about titration of NaOH -
https://brainly.com/question/23911347
#SPJ4
Calculate the cfse for a d^3 system in an octahedral field in units of ∆_o. In other words, do not enter "∆_o" with your answer. For example, if your answer is −0. 8∆_o, then enter "−0. 8. ".
Magnetic moment (spin only) of octahedral complex having CFSE=−0.8Δo and surrounded by weak field ligands can be : Q
To answer this, the Crystal Field Stabilization Energy has to be calculated for a (d3 metal in both configurations. The geometry with the greater stabilization will be the preferred geometry. So for tetrahedral d3, the Crystal Field Stabilization Energy is: CFSE = -0.8 x 4/9 Δo = -0.355 Δo.
[Co(CN)64-] is also an octahedral d7 complex but it contains CN-, a strong field ligand. Its orbital occupancy is (t2g)6(eg)1 and it therefore has one unpaired electron. In this case the CFSE is −(6)(25)ΔO+(1)(35)ΔO+P=−95ΔO+P.
The crystal field stabilization energy (CFSE) (in kJ/mol) for complex, [Ti(H2O)6]3+. According to CFT, the first absorption maximum is obtained at 20,3000cm−1 for the transition.
To learn more about crystal field stabilization energy visit:https://brainly.com/question/29389010
#SPJ4
The charge of a sulfur (S) ion is
The charge of a potassium (K) ion is
The charge of a boron (B) ion is
The charge of an iodine (I) ion is
The charge of a bromine (Br) ion is
Answer: you have to add the atomic number and the protrons
Explanation:
sulphur2-
K1+
B2+
I1-
Br1-
Explanation:
Note this work was not made by me but by a other brainly user
source
https://brainly.in/question/15317203
Write the configuration of a magnesium atom? Will the atom lose or gain electrons? Explain using the idea of stability and energy.
Answer:
[tex]1s^{2} 2s^{2} 2p^{6} 3s^{2}[/tex]
Magnesium will lose 2 electrons.
Explanation:
Looking at a periodic table, magnesium is in the third period and the second group. It would help to look up where atomic orbitals are on the periodic table, but basically, s orbitals are filled in the first two groups. Since magnesium is in the second group, it will just have filled a 3s orbital with two electrons.
Elements in groups 1A, 2A, and 3A especially like to lose electrons to gain stability. Elements want to have a filled valence (outer) orbital with 8 electrons (except for hydrogen and helium) like noble gases. As such, they will lose or gain electrons in the easiest way possible to get a filled valence orbital. Magnesium wants to have the electron configuration of the nearest noble gas, in this case neon, so it will lose 2 electrons to achieve this stability. It takes much less energy to lose 2 electrons than gain 6 to fill its valence orbital, so magnesium will go for the former.
what is the percent yield of hcl if 42.0 g of hcl are produced from the reaction of 62.0 g of pcl3? use percent yield equals startfraction actual yield over theoretical yield endfraction times 100.. 28.4% 72.8% 85.0% 93.5%
The percent yield of HCl is 85.0%.
In chemistry, yield, also referred to as reaction yield, is a measure of the quantity of moles of a product formed in relation to the reactant consumed, obtained in a chemical reaction, usually expressed as a percentage.
%yield = (actual yield/theoretical yield) x 100
The presence of impurities lowers the actual yield, which lowers the percentage yield. The purity of the reactants influences the percentage yield. Highly pure reactants tend to increase actual yield and, as a result, percentage yield.
A percentage yield greater than 100 percent is only possible if the product is contaminated with impurities or if all of the solvent from the reaction mixture has not been dried off.
To know more about percent yield visit :
https://brainly.com/question/26430784
#SPJ4
what is the volume occupied by 15.2 g of argon gas at a pressure of 1.04 atm and a temperature of 353 k ?
The volume of argon will be 10.57 L.
Apply the ideal gas law, PV = nRT, where n is the number of moles and R is the gas constant.
We must divide the given mass of argon by its molar mass because we have mass and need moles. Argon has a molar mass of 40 g/mol.
So the number of moles of Argon in 15.2g is = [tex]\frac{15.2}{40} = 0.38[/tex]mol
Given:
P = 1.04 atm
n = 0.38 mol
R = [tex]0.082057 Latm K^{-1} mol^{-1}[/tex]
T = 353 K
Unknown:
V
Solution:
V = [tex]\frac{nRT}{P}[/tex]
V = [tex]\frac{0.38*0.082*353}{1.04} = 10.57[/tex] L
To learn more about ideal gas law, here
https://brainly.com/question/28257995
#SPJ4
a sample of vitamin a, c20h30o, contains 4.0 x 1024 atoms of carbon. how many moles of vitamin a does it represent?
A sample of vitamin a, C20H30O, contains 4.0 x 1024 atoms of carbon. It represents 6.64 mol of vitamin.
A mole is defined as the quantity of a material that contains precisely the Avogadro number of the substance's "elementary entities."
Every material has the same amount of atoms or other particles in a mole. The mole has the following relationship to an element's mass: One mole of carbon-12 atoms weighs 12 grams and has 6.02214076 x 10^23 atoms.The mole concept helps in putting quantitative data about what transpires in a chemical equation on a macroscopic scale.
Number of carbon atoms in the given sample = 4 x 10^24 atoms.
We know that 6.022 x 10^23 carbon atoms = 1 mole (avagardo constant)
So, moles in 4 x 10^24 carbon atoms will be = 4 x 10^24/ 6.022 x 10^23
= 6.64 mol.
Therefore, no of moles present is 6.64 mol.
To learn more about Mole concept visit :
https://brainly.com/question/14475422
#SPJ4
how many grams of aluminum can form by passing 353 c through an electrolytic cell containing a molten aluminum salt?
0.0329 grams of aluminum can form by passing 353 c through an electrolytic cell containing a molten aluminum salt
AL^3+ + 3A^- = AL
3 moles of e- = 1 mole AL
3 faraday e- = 1 mole AL
3 * 96485 c = 1 mole AL
1 c = (1 / 3*96485)*27 g
353c = 353*27 / 3*96485 g
= 0.0329 g of AL
learn more about aluminum here:
https://brainly.com/question/9496279
#SPJ4
Why does it make sense that acetyl-coa stimulates the activity of pyuruvate carboxylase?.
Acetyl-CoA indicates conversion of fat to carbs necessary. Acetyl-CoA carboxylase accumulation indicates lack of citrate. NADH is produced for energy when pyruvate carboxylase is activated by acetyl-CoA.
Why is it logical that acetyl-CoA would cause pyruvate carboxylase to be activated?Acetyl-CoA selectively activates pyruvate carboxylase. When acetyl-CoA concentrations are high, organisms use pyruvate carboxylase to divert pyruvate from the TCA cycle because acetyl-CoA is a crucial metabolite in the TCA cycle that generates a lot of energy.
How does pyruvate carboxylase become activated by acetyl-CoA?The production of more oxaloacetate is triggered by an excess of mitochondrial acetyl-CoA. When lipolysis is induced, for instance, intramitochondrial acetyl-CoA levels rise, allosterically activating pyruvate carboxylase to produce more oxaloacetate for gluconeogenesis.
To know more about Acetyl-CoA visit :
https://brainly.com/question/16000193
#SPJ4
The answer is part C is the energy required to break six carbon-carbon bonds the average bond enthalpy of one carbon-carbon bond in benzene. Calculate in gaseous benzene, CoHs (g): Express your answer to four significant figures and include the appropriate units. View Available Hint(s) AH = Value Units Submit
348 kilojoules is the energy required to break single carbon-carbon bonds. hence for six carbon-carbon bond 348*6=2088 kilojoules.2088 kilojoules is the bond enthalpy of six carbon-carbon bonds.
What is bond enthalpy?Bond dissociation energy refers to the amount of energy required to break one carbon -carbon bond. This Bond dissociation energy is known as Bond enthalpy.
Bond enthalpy of one carbon-carbon bond in benzene:518 kJ/mol is the Bond enthalpy of one carbon-carbon bond in benzene which means 518 kJ/mol energy is required to break one single c-c bond in benzene.
hence, 348 kilojoules is the energy required to break single carbon-carbon bonds. hence for six carbon-carbon bond 348*6=2088 kilojoules.2088 kilojoules is the bond enthalpy of six carbon-carbon bonds.
To know more about bond enthalpy visit
https://brainly.com/question/9998007
#SPJ4
which of the following compounds would be considered an electrolyte? a. c6h12o6 b. naoh c. co2 d. agcl
Answer: B: NaOH
Explanation:
which of the following has more valence electrons than it does core electrons? a.) calcium b.) neon c.) chlorine d.) aluminum
Neon has more valence electrons than does core electrons. The core electrons of neon are 2 and valence electrons are 8.
10 electrons make up neon, with 2 in the outermost shell and 8 in the outermost shell (so eight valence electrons)
With a total of 10 electrons, neon is the tenth element. The initial two electrons in the electron configuration for neon will be in the 1s orbital. The following two electrons for Ne enter the 2s orbital since 1s can only hold two electrons. Six additional electrons will enter the 2p orbital. The Ne electron configuration will be 1s22s22p6 as a result.
Because there are eight electrons in the second energy level (2s22p6) Neon has a full outer shell and an octet. Therefore, it is a Nobel Gas.
For more information on valence electrons kindly visit to
https://brainly.com/question/15054861
#SPJ4
Pentane (C5H12) is a component of gasoline that burns according to the following balanced equation:
C5H12(l)+8O2(g)→5CO2(g)+6H2O(g)
Calculate ΔH∘rxn for this reaction using standard enthalpies of formation. (The standard enthalpy of formation of liquid pentane is -146.8 kJ/mol.)
Enthalpy change of Pentane (C5H12) that burns is -3,270.5 kJ
Enthalpy change is defined as the difference in enthalpy of total products and reactants, each multiplied by the respective moles. It is expressed as ΔH°rxn
The formula for calculating the enthalpy change of a reaction is:
ΔH°rxn =∑[n x ΔH°f(product) - ∑[n x ΔH°f(reactant)]
The equilibrium reactions are:
C₅H₁₂(l) + 8O₂(g) ⇒ 5CO₂(g) +6H₂O(g)
ΔH°f(CO₂)(g) = -393.5 kJ/mol
ΔH°f(H₂O)(g) = - 241.8 kJ/mol
ΔH°f(C₅H₁₂)(l) = -146.8 kJ/mol
ΔH°f(O₂)(g) = 0 kJ/mol
The equation for the enthalpy change for the above reaction is:
ΔH°rxn =∑[n x ΔH°f(product) - ∑[n x ΔH°f(reactant)]
ΔH°rxn =∑[(n(CO₂) x ΔH°f(CO₂)) + (n(H₂O) x ΔH°f(H₂O)) ]- ∑[(n x ΔH°f(C₅H₁₂)) + (n x ΔH°f(O₂))]
ΔH°rxn =[( 5 x -393.5) + (6 x - 241.8 ) ]- [(1 x -147.8) + (8 x O₂)]
ΔH°rxn = -3,418.3 -(-147.8)
ΔH°rxn = -3,270.5 kJ
Therefore, the enthalpy of burning 1 mole of pentane is -3,270.5 kJ
learn more about enthalpy at https://brainly.com/question/14048672
#SPJ4
In the structure illustrating the bonding in ethene, c2h4, the two arrows point to what type of bond or bonds?.
The straight arrows in the structure c2h4 that represent binding bonding in ethene point to the -bond.
What do you mean bond?Bond are fixed-income products that reflect loans from investors to borrowers . An bond can be compared to the an agreement outlining the terms of the loan and the associated payments between both the lender and borrower.
What is bond in relationship?A strong sense of friendship, affection, or shared values which brings people together is referred to as a bond. We developed a very unique friendship as a result of the event. The tie that bound them was [+ between]. Synonyms include bind, link, tie, and union. Additional words for bond.
To know more about bond visit:
brainly.com/question/10777799
#SPJ4
Partial bonding, for example, as part of a resonance hybrid, often results in structures with _____.
Partial bonding, for example, as part of a resonance hybrid, often results in structures with fractional bond orders.
What is resonance?
Resonance in chemistry, also known as mesomerism, is a means to describe bonding in specific molecules or polyatomic ions by fusing a number of contributing structures into a resonance hybrid according to valence bond theory.
Resonance structure identification guidelines:
Atoms are immobile. Electrons can only be moved in bonds or lone pairs (that are in p orbitals) The system's total fee must not change. A molecule's bonding structure needs to be preserved.
Therefore, Partial bonding, for example, as part of a resonance hybrid, often results in structures with fractional bond orders.
To learn more about resonance
Here: https://brainly.com/question/13741444
#SPJ4
What is the chemical name of the compound K₂SO4?
Answer: Potassium Hydrogen Sulfate
Explanation: The name of the compound K2SO4 is Potassium Hydrogen Sulfate.
showing the behavior of several different gases follow. which of these gases exhibit behavior significantly different from that expected for ideal gases?
Gases C, E and F exhibit behavior significantly different from that expected for an ideal gas. gases exhibit behavior significantly different from that expected for ideal gas
A theoretical gas called an ideal gas is one that has lots of point particles moving around randomly and not being affected by other particles. The ideal gas concept is advantageous because it complies with the ideal gas law, a condensed equation of state, and is amenable to statistical mechanics analysis. A theoretical gas called an ideal gas is one that has lots of randomly moving particles but doesn't have any interparticle interactions. The opposite is true for a real gas; it takes up space and its molecules interact. As a result, PV is always equal to nRT.
Learn more about ideal gas here:
https://brainly.com/question/28257995
#SPJ4
calculate the final concentration of the solution when water is added to prepare each of the following solutions. part a 25.0 ml of a 22.0 m hcl solution is diluted to 440. ml
The final concentration of the solution after adding water is HCl is 1.25M.
The solution of 25ml of 22M HCl is diluted to 440ml.
So, as we know,
Moles = molarity x volume
So, he moles of HCl are,
Moles = 22 x 25
Moles of HCl are 550 mole.
Even after diluting, the mole will not change, so,
Final concentration after adding water,
Concentration = 550/440
Concentration = 1.25M.
So, the final concentration of the HCl solution is 1.25M.
To know more about Concentration, visit,
https://brainly.com/question/17206790
#SPJ4
indentify the three decomposition reactions. how did you determine the calssification of these chemicals reactions
Thermolysis, photolysis, and electrolysis are three different forms of breakdown reactions. A single source was cooked to yield two or more objects in each instance (decomposition).
Which reaction is decomposition?Decomposition reactions happen when complex chemical entities split apart into smaller components. Decomposition reactions often demand energy input. For instance, the thermal breakdown of potassium hydroxide (KClO3) is a typical technique used during laboratories to generate oxygen gas.
What kind of decomposition best illustrates this?Below is a typical illustration of a thermal breakdown reaction. Calcite breaks down into calcareous dioxide and atmospheric co2 when heated. The production of quick lime, a crucial component in numerous industries, uses this procedure.
To know more about Decomposition reaction visit:
https://brainly.com/question/16987748
#SPJ4
What do you notice about the temperature while the water is in the process of freezing?.
Answer:
During freezing, the temperature of a substance remains constant while the particles in the liquid form a crystalline solid.
Explanation:
WHICH OF THE FOLLOWING IS TRUE ABOUT THE MASSES OF THE SUBATOMIC PARTICALS OF AN ATOM?
a
ELECTRONS AND NEUTRONS ARE 1 AMU AND PROTONS ARE 1/2000 AMU.
b
ELECTRONS, PROTONS AND NEUTRONS ARE ALL 1 AMU.
c
PROTONS AND NEUTRONS ARE 1 AMU AND ELECTRONS ARE 1/2000 AMU.
d
ELECTRONS AND PROTONS ARE 1 AMU AND NEUTRONS ARE 1/2000 AMU.
Answer:
C.
Explanation:
Both protons and neutrons are 1 amu while electrons are 1/2000 amu
which of the following is not true? group of answer choices the bronsted-lowry model applies to a wider range of acid-base phenomena than does the arrhenius model. the arrhenius model of acids and bases applies toward substances that are nonaqueous. the arrhenius model of acids and bases was developed before the bronsted-lowry model. the bronsted-lowry model can apply to bases that do not contain hydroxide ions. none of the above
Arrhenius Model of acids and bases is applicable to nonaqueous substances.
Which of the following statements is FALSE?
A) Nonaqueous substances are subject to the Arrhenius Model of acids and bases.
B) The Bronsted-Lowry Model was created before the Arrhenius Model of acids and bases.
C) Bases without hydroxide ions can still use the Bronsted-Lowry Model.
D) Compared to the Arrhenius Model, the Bronsted-Lowry Model covers a greater spectrum of acid-base phenomena.
option A is correct
To know more about bronted lowery model
visit:
https://brainly.com/question/13920847
#SPJ4
Select the single best answer: Which of the following additions will result in decrease in the pH of the solution? Adding ammonium nitrate to an ammonia solution. Adding potassium chloride to hydrochloric acid solution: Adding sodium formate to formic acid solution
Adding ammonium nitrate to an ammonia solution will result in a decrease in the pH of the solution.
Ammonia is a basic compound. In aqueous solution, the lone pair on the nitrogen atom is able to capture a proton, forming the ammonium ion. Ammonium is the conjugate acid of ammonia, and is slightly acidic. Adding ammonium to a solution of ammonia will lower the pH, since the ammonium is acidic.
The HCl and KCl in the system are there to increase the solution's ionic strength, which results in increased pH value.
The sodium formate solution adds sodium ions and formate ions. This disturbs the formic acid equilibrium, driving it towards reactants. This removes some hydronium ion from solution, increasing the pH.
Learn more about ph of solution ; https://brainly.com/question/11300720?referrer=searchResults
#SPJ4
curved arrows are used to illustrate the flow of electrons. using the provided starting and product structures, draw the curved electron-pushing arrows for the following reaction or mechanistic steps. be sure to account for all bond-breaking and bond-making steps.
The electron flow arrow always starts from the nucleophilic center to the electrophilic Centre.
What is nucleophilic ?
The term "nucleophile" refers to an atom or molecule that searches for a positive centre during a chemical reaction, such as the nucleus of an atom, since the nucleophile has an accessible electron pair for bonding.
What is electrophilic ?
An atom or molecule that searches for an atom or molecule that has a pair of free electrons during a chemical process. Lewis acids, which absorb electron pairs, are electrophilic chemicals; many of them are also Brnsted acids (compounds that donate protons).
The electron flow arrow always starts from the nucleophilic center to the electrophilic Centre. The arrow starts from the electrons.
Mechanism with arrows:-
Therefore, The electron flow arrow always starts from the nucleophilic center to the electrophilic Centre.
Learn more about nucleophilic from the given link.
https://brainly.com/question/14052597
#SPJ4
During glycolysis, sugar (glucose) is converted to a more usable form called __________________________.
Answer:
-ATP -carbon -glycolysis -Electron -Transport -FADH -phosphates -dioxide -pyruvate -ADP -NADH -Synthase -Water -cytoplasm -Chain -mitochondria -Krebs -oxygen
Explanation:
Staci ordered a frozen yogurt cone. The picture shows the frozen yogurt cone after Staci was finished and ran off to play. A partially melt yogurt in a cone. Which statement correctly describes the particles that make up the yogurt cone shown? A. The particles move slower and vibrate in place in the melted yogurt. B. The particles stop moving when the yogurt is completely melted. C. The particles move faster and slide past each other in the melted yogurt. D. The particles in the yogurt move only if the temperature changes suddenly.
According to the forces of attraction, in the frozen yogurt which is melted the particles move faster and slide past each other in the melted yogurt.
What are forces of attraction?Forces of attraction is a force by which atoms in a molecule combine. it is basically an attractive force in nature. It can act between an ion and an atom as well.It varies for different states of matter that is solids, liquids and gases.
The forces of attraction are maximum in solids as the molecules present in solid are tightly held while it is minimum in gases as the molecules are far apart . The forces of attraction in liquids is intermediate of solids and gases.
The physical properties such as melting point, boiling point, density are all dependent on forces of attraction which exists in the substances.
Learn more about forces of attraction,here:
https://brainly.com/question/14365107
#SPJ1
Consider atoms of oxygen and fluorine. Which atom will be the least likely to lose an electron to form an ion and why?
Answer: Fluorine
Explanation:
Fluorine is least likely to lose an electron to form an ion as it needs only 1 electron to complete its shell compared to Oxygen which needs 2.
Answer:
flourine
Explanation:
Flourine will be the least likely to lose an electron because its ionization energy is higher than oxygen's. Ionization energy is an atoms ability to lose electrons, and it increases up the periods, and across the groups to the right.
if a wave has a frequency of 7.20 x 10^14 Hz and travels at the speed of light (speed of light = 3.0 x 10^8 m/s), what is the wavelength?
If a wave has a frequency of 7.20 x 10^14 Hz and travels at the speed of light (speed of light = 3.0 x 10^8 m/s), the wavelength is 0.42 × 10⁻⁶ m.
What do you mean by wavelength ?The term wavelength of light is defined as the distance between the two successive crests or troughs of the light wave. Wavelength is denoted by the Greek letter lambda (λ).
Given:
frequency = 7.20 x 10^14 Hz
speed of light = 3.0 x 10^8 m/s
Wavelength = ?
Wavelength = speed of light/ frequency
λ = ν / f
= 3.0 x 10^8 / 7.20 x 10^14
= 0.42 × 10⁻⁶ m
Thus, if a wave has a frequency of 7.20 x 10^14 Hz and travels at the speed of light (speed of light = 3.0 x 10^8 m/s), the wavelength is 0.42 × 10⁻⁶ m.
To learn more about the wavelength, follow the link;
https://brainly.com/question/13533093
#SPJ1