Identify the elements that correspond to the following generalized electron configuration: (noble gas]ns2(n − 2) f6
Express your answer as the element symbol. If there is more than one answer, separate them by a comma.

Answer:

5.56 × 10⁻⁸

Explanation:

Step 1: Given data

Step 2: Calculate the concentration of H⁺

We will use the following expression.

pH = -log [H⁺]

[H⁺] = antilog -pH = antilog -3.99 = 1.02 × 10⁻⁴ M

Step 3: Calculate the acid dissociation constant (Ka)

We will use the following expression.

[tex]Ka = \frac{[H^{+}]^{2} }{Ca} = \frac{(1.02 \times 10^{-4})^{2} }{0.187} = 5.56 \times 10^{-8}[/tex]

Answer:

A catalyst cannot change an exothermic reaction into an endothermic reaction or vice versa.

Explanation:

Catalyst is basically a substance that enables a chemical reaction to occur at a faster rate as compared to the reaction without catalysis. It lowers the activation energy and temperature for a chemical reaction and a catalyst itself does not goes through any permanent chemical change. This means it does not get used in the process.

Exothermic and endothermic are the chemical reaction. Exothermic reactions absorb energy. This energy is absorbed in the form of heat. When the energy is released in the form of heat then this reaction is called endothermic. So one absorbs the heat and the other  releases it.

As we know that the catalyst does not undergo change at the end of the reaction so the energy or heat whether is absorbed or emitted or you can say whether the reaction is exothermic or endothermic, the total energy stays unchanged during the reaction. So with and without a catalyst, if both have same reactants and products and the difference in enthalpy between products and reactants will be the same.

Answer:

8.33mL or .0083L

Explanation:

Use m1 * V1 = m2 * V2

6.00M(x) = 0.100M(500mL)

solve for x

x= (.1 * 500) / 6

x=8.333 mL

Answer:

intermolecular dipole-dipole hydrogen bonds

Explanation:

Water is a polar molecule. Recall that the central atom in water is oxygen. The molecule is bent, hence it has an overall dipole moment directed towards the oxygen atom. Since it has a permanent dipole moment, we expect that it will show dipole-dipole interactions in the liquid state.

Similarly, water contains hydrogen and oxygen. Recall that hydrogen bonds are formed when hydrogen is covalently bonded to highly electronegative elements. Hence, water in the liquid state exhibits strong hydrogen bonding. The unique type of dipole-dipole interaction in liquid water is actually hydrogen bonding, hence the answer.

Answer: pH=2.38

Explanation:

To calculate the pH, let's first write out the equation. Then, we will make an ICE chart. The I in ICE is initial quantity. In this case, it is the initial concentration. The C in ICE is change in each quantity. The E is equilibrium.

            HCOOH ⇄ H⁺ + HCOO⁻

I               1.0M          0          0

C              -x            +x        +x

E            1.0-x            x          x

For the steps below, refer to the ICE chart above.

1. Since we were given the initial of HCOOH, we can fill this into the chart.

2. Since we were not given the initial for H⁺ and HCOO⁻, we will put 0 in their place.

3. For the change, we need to add concentration to the products to make the reaction reach equilibrium. We would add on the products and subtract from the reactants to equalize the reaction. Since we don't know how much the change in, we can use variable x.

4. We were given the Kₐ of the solution. We know [tex]K_{a} =\frac{product}{reactant}=\frac{[H^+][HCOO^-]}{[HCOOH]}[/tex].

5. The problem states that the Kₐ=1.8×10⁻⁴. All we have to so is to plug it in and to solve for x.

[tex]1.8*10^-^4 =\frac{x^2}{0.1-x}[/tex]

6. Once we plug this into the quadratic equation, we get x=0.00415.

7. The equilibrium concentration of [H⁺]=0.00415. pH is -log(H⁺).

-log(0.00415)=2.38

Our pH for the weak acid solution is 2.38.

Answer:

Option A - When |ΔHsolute| > |ΔHhydration|

Explanation:

A solution is defined as a homogeneous mixture of 2 or more substances that can either be in the gas phase, liquid phase, solid phase.

The enthalpy of solution can either be positive (endothermic) or negative (exothermic).

Now, we know that enthalpy is amount of heat released or absorbed during the dissolving process at constant pressure.

Now, the first step in thus process involves breaking up of the solute. This involves breaking up all the intermolecular forces holding the solute together. This means that the solute molecules are separate from each other and the process is always endothermic because it requires energy to break interaction. Thus;

The enthalpy ΔH1 > 0.

Thus, the enthalpy of the solute has to be greater than the enthalpy of hydration.

An endothermic ΔHsolution occurs when |ΔH solute| < |ΔH hydration|.

A substance dissolves in water when the solute - solvent interaction exceeds the solute - solute solute interaction. The energy required to break the bonds between solutes is the ΔHsolute and the energy released when solute - solvent interaction take place is called the ΔHhydration.

We know that when  |ΔH solute| < |ΔH hydration|, energy is required to break up the solute - solute interaction and  ΔHsolution is endothermic.

Learn more: https://brainly.com/question/1340582

Answer:

Solid Wood

Explanation:

Wood is like a solid block, whereas gases flow freely and liquids spread to fill the shape of their container.

Please let me know if I misunderstood the question, by the way.

Explanation:

A metal ion is a type of atom compound that has an electric charge.

Such atoms willingly lose electrons in order to build positive ions called cations. The selected  Ions are :

[tex]1. Mn^2^+\\\ 2. Ca^2^+\\\ 3. Co^2^+\\\ 4. Fe^2^-\\\ 5. K^+[/tex]

Answer:

∆H > 0

∆Srxn <0

∆G >0

∆Suniverse <0

Explanation:

We are informed that the reaction is endothermic. An endothermic reaction is one in which energy is absorbed hence ∆H is positive at all temperatures.

Similarly, absorption of energy leads to a decrease in entropy of the reaction system. Hence the change in entropy of the reaction ∆Sreaction is negative at all temperatures.

The change in free energy for the reaction is positive at all temperatures since ∆S reaction is negative then from ∆G= ∆H - T∆S, we see that given the positive value of ∆H, ∆G must always return a positive value at all temperatures.

Since entropy of the surrounding= - ∆H/T, given that ∆H is positive, ∆S surrounding will be negative at all temperatures. This is so because an endothermic reaction causes the surrounding to cool down.

Answer:

(a) The empirical formula of the compound is

m(CxHy) + m(O2) = m(CO) + m(CO2) + m(H2O).

(b) The grams of O2 that were used in the reaction is 1.146 g

(c) The amount of O2 that would have been required for complete combustion is 1.401 g.

Explanation:

a. m(CxHy) + m(O2) = m(CO) + m(CO2) + m(H2O)

(b) Using law of conservation of mass from above

m(O2) = m(CO) + m(CO2) + m(H2O) - m(CxHy)

m(O2) = 0.446 + 0.700 + 0.430 - 0.430

m(O2) = 1.146 g

The grams of O2 that were used in the reaction is 1.146 g

(c) for complete combustion, we need to oxidized CO to CO2

Then, 2CO +O2 = 2CO2

m(add)(O2) = M(O2)*¢(O2)/2 = M(O2) * {(m(CO))/(2M(CO))}

m(add)(O2) = 32 * {(0.446)/(2*28)} = 0.255 g

Note; Molar mass of O2 = 32, CO = 28

m(total)(O2) = m(O2) + m(add)(O2)

m(total)(O2) = 1.146 + 0.255 = 1.401 g

The amount of that grams would have been required for complete combustion is 1.401 g.

Note (add) and (total) were used subscript to "m"

Answer:

4 and 6 would work for this

Answer:

C.

Explanation:

Since the mass number is the number of protons and neutrons added together, the answer is 35. Since the questions are respectively electron quantity and mass number, the only answer choice with 35 as the second choice is C, so that is the correct answer.

Answer:

The unknown element is Sb

Explanation:

The first thing we must note is that the unknown element must be a member of group 15 in the periodic table. This is clear from the fact that the two oxides formed are X2O3 and X2O5. This implies that the unknown element X must have a valency of 3 or 5. This corresponds to our knowledge that the outermost electron configuration of group 15 elements is ns2np3. Hence, group fifteen elements can have a valency of 3 or 5.

The electronic configuration of antimony is; [Kr]4d10 5s2 5p3. This implies that the atom is paramagnetic since there are three unpaired 5p electrons. The oxides of antimony are known to be amphoteric. An ampohoteric oxide reacts with both acid and base, hence the answer.

Answer:

Explanation:

The energy of a photon emitted when the electron moves from the 3rd orbital to the 2nd orbital is exactly same as the energy of a photon absorbed when the electron moves from the 2nd orbital to the 3rd orbital

Answer: [tex]H_2(g)+I_2(g)\rightarrow 2HI(s)[/tex]

Explanation:

According to the law of conservation of mass, mass can neither be created nor be destroyed. Thus the mass of products has to be equal to the mass of reactants. The number of atoms of each element has to be same on reactant and product side. Thus chemical equations are balanced.

Thus in the reactants, there are 2 atoms of hydrogen and 2 atoms of iodine .Thus there has to be 2 atoms of hydrogen and 2 atoms of iodine in the product as well. Thus a coefficient of 2 is placed in front of HI.

The balanced chemical reaction is:

[tex]H_2(g)+I_2(g)\rightarrow 2HI(s)[/tex]

The given question is incomplete, the complete question is:

Calculate the free energy of formation of NaBr(s) given the following information: NaBr(s) → Na(s) + 1/2Br2(l), ΔG° = 349 kJ/mol

A) –309 kJ/mol

B) –329 kJ/mol

C) None of the above

D) –349 kJ/mol

E) –369 kJ/mol

Answer:

The correct answer is option D, that is, -349 kJ/mol.

Explanation:

Based on the given information, the reaction is:  

NaBr (s) ⇔ Na (s) + 1/2 Br₂ (l), the ΔG° of the reaction given is 349 kJ per mole. In the given question, it is clearly mentioned that there is a need to determine the free energy of the formation of NaBr. Thus, there is a need to keep Na (s) and Br₂ (l) at the reactant side and NaBr (s) at the product side.  

Therefore, there is a need to reverse the reaction and change the sign on ΔG.  

Now the reaction will become,  

Na (s) + 1/2 Br₂ (l) ⇔ NaBr (s), and the ΔG° will now become -349 kJ per mole. Hence, -349 kJ per mole is the free energy of the formation of NaBr (s).  

Answer:

i guess oil never dissolve in water. As like dissolve like. water is polar so it dissolves only polar substances

Explanation:

Answer:

None

Explanation:

Answer on Edge 2022

Answer:

B - Making an Observation

Explanation:

Making an observation best describes the act of using senses or tools to gather information. Therefore, option B is correct.

The five senses—sight, taste, touch, hearing, and smell—gather data about our surroundings that the brain interprets. Based on prior experience (and subsequent learning), as well as by combining the data from each sensor, we make sense of this information.

Information gleaned from your five senses is referred to as an observation. These are smell, taste, touch, hearing, and sight. When you see a bird or hear it sing, you notice it.

The term observation, which is also used to sense five aspects of the world including vision, taste, touch, smell, and hearing, is used to describe utilizing the senses to examine the world, employing tools to take measurements, and looking at prior research findings.

Thus, option B is correct.

To learn more about the scientific method, follow the link:

https://brainly.com/question/7508826

#SPJ7

Answer:

Uranium-238 undergoes alpha decay to form Thorium-234 as daughter product.

Explanation:

Alpha decay is indicative of loss of the equivalents of a helium particle emission. The reaction equation for this reaction is shown below:

[tex]_{92} ^{238} U_{}[/tex]→ [tex]_{90} ^{234} Th_{} + _{2} ^{4} He_{}[/tex]

I hope this explanation is clear and explanatory.

Answer:

The answer is " 10.39"

Explanation:

Calculating acid moles:

[tex]= 0.02000 \ L \times 0.1000 \ M \\\\= 0.002000[/tex]

Calculating NaOH moles:

[tex]= 0.02012 \ L \times 0.1000 \ M \\\\= 0.002012[/tex]

calculating excess in OH-  Moles:

[tex]= 0.002012 - 0.002000\\\\=0.000012[/tex]

calculating total volume:

[tex]= 20.00 + 20.12\\\\ = 40.12 mL \\\\= 0.04012 L[/tex]

[tex][OH-]= \frac{0.000012} { 0.0472}[/tex]

           [tex]=0.00025 M[/tex]

[tex]pOH = - \log 0.00025[/tex]

        = 3.6

[tex]pH = 14 - pOH[/tex]

      = 10.39

Answer: 1) Endothermic

2) Yes, absorbed.

3) 166.86 kJ will be absorbed.

Explanation:

1) To determine if a reaction is endothermic (heat is absorbed by the system) or exothermic (heat is released by the system), first calculate its change in Enthalpy, which is given by:

ΔH = [tex]H_{products} - H_{reagents}[/tex]

For the reaction 2Fe₂O₃(s) ⇒ 4FeO(s) + O₂(g):

Enthalpy of Reagent (Fe₂O₃(s))

Enthalpy of formation for Fe₂O₃(s) is - 822.2 kJ/mol

The reaction needs 2 mols of the molecule, so:

H = 2(-822.2)

H = - 1644.4

Enthalpy of Products (4FeO(s) + O₂(g))

Enthalpy of formation of O₂ is 0, because it is in its standard state.

Enthalpy of formation of FeO is - 272.04 kJ/mol

The reaction produces 4 mols of iron oxide, so:

H = 4(-272.04)

H = -1088.16

Change in Enthalpy:

ΔH = [tex]H_{products} - H_{reagents}[/tex]

ΔH = - 1088.16 - (-1644.4)

ΔH = + 556.2 kJ/mol

The change in enthalpy is positive, which means that the reaction is absorving heat. Then, the chemical reaction is Endothermic.

2) When Fe₂O₃(s) reacts, heat is absorbed because it is an endothermic reaction.

3) Calculate how many mols there is in 94.2 g of Fe₂O₃(s):

n = [tex]\frac{mass}{molar mass}[/tex]

n = [tex]\frac{94.2}{160}[/tex]

n = 0.6 mols

In the reaction, for 2 mols of Fe₂O₃(s), 556.2 kJ are absorbed. Then:

2 mols --------------- 556.2 kJ

0.6 mols ------------- x

x = [tex]\frac{0.6*556.2}{2}[/tex]

x = 167 kJ

It will be absorbed 167 kJ of energy, when 94.2 g of Fe₂O₃(s) reacts.

Answer:

a. both temperature changes will be the same

Explanation:

When sodium hydroxide (NaOH) is dissolved in water, a determined amount is released to the solution following the equation:

Q = m×C×ΔT

Where Q is the heat released, m is the mass of the solution, C is the specific heat and ΔH is change in temperature.

Specific heat of both solutions is the same (Because the solutions are in fact the same). Specific heat = C.

m is mass of solutions: 102g for experiment 1 and 204g for experiment 2.

And Q is the heat released: If 2g release X heat, 4g release 2X.

Thus, ΔT in the experiments is:

Experiment 1:

X / 102C = ΔT

Experiment 2:

2X / 204C = ΔT

X / 102C = ΔT

That means,

Answer:

[tex]0.48~\frac{J}{g~^{\circ}C}[/tex]

Explanation:

In this question, we have to remember the relationship between Q (heat) and the specific heat (Cp) the change in temperature (ΔT), and the mass (m).

[tex]Q=m*Cp*ΔT[/tex]

The next step is to identify what values we have:

[tex]Q~=~1870~J[/tex]

[tex]m~=~85.01~g[/tex]

[tex]ΔT~=~45.2~^{\circ}C[/tex]

[tex]Cp~=~X[/tex]

Now, we can plug the values and solve for "Cp":

[tex]1870~J=~85.01~g~*Cp*45.2~^{\circ}C[/tex]

[tex]Cp=\frac{1870~J}{85.01~g~*45.2~^{\circ}C}[/tex]

[tex]Cp=0.48~\frac{J}{g~^{\circ}C}[/tex]

The unknow metal it has a specific value of [tex]0.48~\frac{J}{g~^{\circ}C}[/tex]

I hope it helps!

Answer:

[tex]1) NH_{4}IO_{3}\\2) Pb(IO_{3})_{4} \\3) NH_{4}(C_{2}H_{3}O_{2})\\4) Pb(C_{2}H_{3}O_{2})_{4}[/tex]

Explanation:

[tex]1) NH_{4}^{+}IO_{3}^{-} ---> NH_{4}IO_{3}\\2) Pb^{4+}(IO_{3}^{-})_{4} --->Pb(IO_{3})_{4} \\3) NH_{4}^{+}(C_{2}H_{3}O_{2})^{-} ---> NH_{4}(C_{2}H_{3}O_{2})\\4) Pb^{4+}(C_{2}H_{3}O_{2})^{-} _{4} --->Pb(C_{2}H_{3}O_{2})_{4}[/tex]

Answer:

8.59 g

2.25 g

Explanation:

According to the given situation the calculation of grams of PbO and grams of NaCL is shown below:-

Moles of Pb(OH)CL is

[tex]= \frac{Mass}{Molar\ mass}[/tex]

[tex]= \frac{10.0 g}{259.65g / mol}[/tex]

= 0.0385 mol

Mass of PbO needed is

[tex]= 0.385mol Pb(OH) Cl\times \frac{1 mol PbO}{1molpb (OH) cl} \times \frac{223.2g PbO}{1mol PbO}[/tex]

After solving the above equation we will get

= 8.59 g

Mass of NaCL needed is

[tex]= \frac{1mol\ NaCl}{1molPb\ (OH)Cl} \times \frac{58.45NaCl}{1mol NaCl}[/tex]

After solving the above equation we will get

= 2.25 g

Therefore we have applied the above formula.

Answer:

D. [HCHO₂] > [NaCHO₂]

Explanation:

Formic acid, HCHO₂, is a weak acid that, in presence of its conjugate base, NaCHO₂ (CHO₂⁻), produce a buffer following H-H equation:

pH = pKa + log [CHO₂⁻] / [HCHO₂]

As pKa of the acid is 3.74 and pH of the solution is 3.11:

3.11 = 3.74 + log [CHO₂⁻] / [HCHO₂]

-0.63 = log [CHO₂⁻] / [HCHO₂]

0.2344 = [CHO₂⁻] / [HCHO₂]

A ratio [CHO₂⁻] / [HCHO₂] < 1, means:

Answer:

To obtain the grams of fat that the ground round has, knowing that it weighs 1.33 pounds we must pass this value to grams. Since 1 pound equals 453.59 grams, 1.33 pounds equals 603.27 (453.59 x 1.33).

Now, to obtain 29 percent of 603.27, we must make the following calculation: 603.27 / 100 x 29, which gives a total of 174.94 grams.

In this way, your reasoning is correct and it is probably a mistake in the book.

Answer:

Option A. LR = N2O4, 45.7g N2 formed

Explanation:

The balanced equation for the reaction is given below:

N2O4(l) + 2N2H4(l) → 3N2(g) + 4H2O(g)

Next, we shall determine the masses of N2O4 and N2H4 that reacted and mass of N2 produced from the balanced equation. This is illustrated below:

Molar mass of N2O4 = 92.02 g/mol

Mass of N2O4 from the balanced equation = 1 x 92.02 = 92.02 g

Molar mass of N2H4 = 32.05 g/mol

Mass of N2H4 from the balanced equation = 2 x 32.05 = 64.1g

Molar mass of N2 = 2x14.01 = 28.02g/mol

Mass of N2 from the balanced equation = 3 x 28.02 = 84.06g

Summary:

From the balanced equation above,

92.02g of N2O4 reacted with 64.1g of N2H4 to produce 84.06g of N2.

Next, we shall determine the limiting reactant. This can be obtained as follow:

From the balanced equation above,

92.02g of N2O4 reacted with 64.1g of N2H4.

Therefore, 50g of N2O4 will react with = (50 x 64.1)/92.02 = 34.83g of N2H4.

From the calculations made above, we can see that only 34.83g out 45g of N2H4 is required to react completely with 50g of N2O4.

Therefore, N2O4 is the limiting reactant and N2H4 is the excess reactant.

Finally, we shall determine the mass of N2 produced from the reaction.

In this case the limiting reactant will be used as it will produce the maximum yield of N2 since all of it is used up in the reaction.

The limiting reactant is N2O4 and the mass N2 produced can be obtained as illustrated below:

From the balanced equation above,

92.02g of N2O4 reacted to produce 84.06g of N2.

Therefore 50g of N2O4 will react to produce = (50 x 84.06)/92.02 = 45.7g of N2.

Therefore, 45.7g of N2 were produced from the reaction.

At the end of the day,

The limiting reactant is N2O4 and 45.7g of N2 were produced from the reaction.

Answer:

5727 years or 5730 (rounded to match 3 sig figs) whichever one your teacher prefers

Explanation:

First Order decay has a half life formula of Half Life = Ln (2) / k = 0.693/K

Half-life = 0.693/k = 0.693/1.21 x10-4 =  5727 years or 5730 (rounded to match 3 sig figs)

This should be correct because if you google the half-life of 14 C it is ~ 5700 years