To identify the compounds that are more soluble in an acidic solution than in a neutral solution, we can analyze the compounds to see which ones would react with the acidic protons (H+) to form more soluble species. Here's a step-by-step analysis of the compounds:
1. HgF2: Mercury (II) fluoride forms soluble complexes with acidic protons, increasing its solubility in acidic solutions.
2. NaNO3: Sodium nitrate is a salt of a strong acid (HNO3) and a strong base (NaOH). Its solubility is not affected by the acidity of the solution.
3. LiClO4 - Lithium perchlorate is also a salt of a strong acid (HClO4) and a strong base (LiOH). Its solubility remains unchanged in an acidic solution.
4. HgI2 - Mercury(II) iodide also forms soluble complexes with acidic protons, increasing its solubility in acidic solutions.
5. CoS - Cobalt sulfide reacts with acidic protons to form more soluble species like Co2+ and H2S, so its solubility increases in acidic solutions.
In summary, the compounds HgF2, HgI2, and CoS are more soluble in an acidic solution than in a neutral solution.
To know more about compounds visit :
https://brainly.com/question/14117795
#SPJ11
draw the product formed when (s)−butan−2−ol is treated with tscl and pyridine.
TsCl is the abbreviation for tosyl chloride, a reagent used in organic synthesis as a source of the tosyl group.
Tosyl groups, also known as toluenesulfonyl groups, are employed in organic synthesis as protecting groups for alcohols, phenols, and amines. They are also used in the formation of sulfonamide and sulfonate esters.
The reaction can be represented as follows: To begin, (S)-butan-2-ol is treated with pyridine and tosyl chloride to form a tosylate ester. The reaction can be broken down into two stages:1. The alcohol reacts with pyridine to generate an intermediate.2. The intermediate reacts with tosyl chloride to form a tosylate ester.As shown below, the reaction is depicted in the following figure: Thus, the product formed is (S)-butan-2-yl tosylate as shown below:
To learn more about chloride visit;
https://brainly.com/question/32108518
#SPJ11
the name of the nucleoside that is part of the nucleotide dadp is
DADP is a nucleotide composed of deoxyadenosine, a nitrogenous base, a pentose sugar, and two phosphate groups attached to the 5' carbon. Nucleosides are organic molecules formed by the combination of a nitrogenous base with a pentose sugar. Ribonucleosides are when the pentose sugar is deoxyribose and deoxyribonucleosides when it is deoxyribose.
DADP (Deoxyadenosine 5'-diphosphate) is a nucleotide composed of deoxyadenosine, a nitrogenous base (adenine), a pentose sugar (deoxyribose), and two phosphate groups attached to the 5' carbon. Nucleosides are organic molecules formed by the combination of a nitrogenous base with a pentose sugar (five-carbon sugar). Ribose is when the pentose sugar is ribose, while deoxyribose is when the pentose sugar is deoxyribose. A nucleoside has no phosphate group, while a nucleotide consists of a nucleoside and a phosphate group.
To know more about DADP Visit:
https://brainly.com/question/32147460
#SPJ11
For each of the following transition metal complexes, determine the oxidation state of the metal, its coordination number, and the number of d electrons on that metal.
(a) OsO4 (b) [Cr(H2O)6]3+ (c) [Cr(H2O)6]2+
(d) [Cr(H2O)4Cl2]+ (e) [Fe(H2O)6]2+ (f) [Co(NH3)6]2+
(g) WCl6 (h) [Pt(CN)4]2- (i) [Mn(H2O)6]2+
(j) Mn(CO)5Br (k) [AuCl2]- (l) [ReH9]2-
The oxidation state of the metal OsO₄ is +8 , its coordination number is 4, and the number of d electrons on that metal is 0
OsO₄ = Oxidation number +8
coordination number = 4
No. of d electron on metal = 0
(b) [Cr(H₂O)₆]³⁺ = Oxidation number + 3
coordination number = 6
No. of d electron on metal = 3
(c) [Cr(H₂O)₆]²⁺ = Oxidation number +2
coordination number = 6
No. of d electron on metal = 4
(d) [Cr(H₂O)₄Cl₂]⁺ = Oxidation number +3
coordination number = 6
No. of d electron in metal = 3
(e) [Fe(H₂O)₆]²⁺ = Oxidation number = +2
coordination number = 6
No. of d electron in metal = 6
(f) [Co(NH₃)₆]²⁺ = Oxidation number = +2
coordination number = 6
No. of d electron in metal = 7
(g) WCl₆ = Oxidation number = +6
coordination number = 6
No. of d electron in metal = 0
(h) [Pt(CN)₄]⁻² = Oxidation number = +2
coordination number = 4
No. of d electron in metal = 8
(i) [Mn(H₂O)₆]²⁺ = Oxidation number +2
coordination number = 6
No. of d electron in metal = 5
(j) Mn(CO)₅Br = Oxidation number +1
coordination number = 6
No. of d electron in metal = 5
(k) [AuCl₂]⁻ = Oxidation number +1
coordination number = 2
No. of d electron in metal = 10
(l) [ReH₉]²⁻ = Oxidation number +7
coordination number = 9
No. of d electron in metal = 0
What is meant by the term "transition metal"?A transition metal is one that produces one or more stable ions with d orbitals that are only partially filled. Despite being members of the d block, scandium and zinc do not qualify as transition metals according to this definition.
What makes a transition metal an element?Change components (otherwise called progress metals) are components that have to some extent filled d orbitals. An element with the ability to form stable cations and a d orbital that is only partially filled with electrons is one of the transition elements, as defined by IUPAC.
Learn more about Transition metals:
brainly.com/question/30389112
#SPJ4
using noble gas notation write the electron configuration for the titanium atom.
The notation for noble gas is based on the electron configuration of the nearest noble gas, which can be used to represent the valence electrons of an atom. The notation for noble gas is used to represent the electron configuration of elements.
To write the electron configuration for the titanium atom, we can use the notation for noble gas as follows:1s²2s²2p⁶3s²3p⁶4s²3d²In order to write the electron configuration of an element, we first write the number of electrons in the first energy level, then the second energy level, and so on. We then add the electrons in each sublevel in order of increasing energy. Finally, we add the remaining electrons to the highest energy sublevel. This gives us the electron configuration of the element.In the case of titanium, the electron configuration is as follows:1s²2s²2p⁶3s²3p⁶4s²3d²In conclusion, the electron configuration for the titanium atom can be written using noble gas notation as 1s²2s²2p⁶3s²3p⁶4s²3d².
For more information on titanium atom visit:
brainly.com/question/29793325
#SPJ11
how many alkenes yield 2,2,3,4,4−pentamethylpentane on catalytic hydrogenation?
Pentamethylpentene yields 2,2,3,4,4−pentamethylpentane on catalytic hydrogenation. There is only one alkene that yields 2,2,3,4,4−pentamethylpentane on catalytic hydrogenation.
Alkenes are unsaturated hydrocarbons that have a double bond between two carbon atoms in their structure. In terms of their physical properties, they are colorless, nonpolar, and have a boiling point that rises with the number of carbons in the compound. Alkenes are used in various chemical processes, including the manufacture of polymers, detergents, and fuels.
Catalytic hydrogenation is a chemical reaction in which hydrogen is added to an organic compound in the presence of a metal catalyst. The process usually involves the hydrogenation of carbon-carbon double or triple bonds. Catalytic hydrogenation is an essential technique for the reduction of alkenes and alkynes. This technique is used in a wide variety of industries, including the production of food, fuels, and pharmaceuticals.
2,2,3,4,4−pentamethylpentane is an organic compound. It is an isomer of hexamethylpentane. This compound is used in the production of high-performance fuels. 2,2,3,4,4−pentamethylpentane can be synthesized through the catalytic hydrogenation of pentamethylpentene.
Learn more about catalytic hydrogenation at https://brainly.com/question/31391872
#SPJ11
When 0.105 mol propane, C3H8 is burned in an excess of oxygen, how many moles of oxygen are consumed?
The balanced chemical equation of the combustion of propane (C3H8) in the presence of excess oxygen (O2) is given as follows:
$$C_3H_8 + 5O_2 \to 3CO_2 + 4H_2O$$It can be observed from the balanced equation that 1 mole of propane reacts with 5 moles of oxygen. Hence, if 0.105 mol of propane reacts with excess oxygen, then the moles of oxygen consumed will be:$$\begin{aligned} \text{Moles of Oxygen consumed} &= \text{Moles of Propane} \times \frac{\text{Moles of Oxygen}}{\text{Moles of Propane}} \\ &= 0.105\text{ mol} \times \frac{5\text{ mol}}{1\text{ mol}} \\ &= \boxed{0.525}\text{ mol} \end{aligned}$$Therefore, 0.525 moles of oxygen will be consumed in the combustion of 0.105 mol propane in an excess of oxygen.
To know more about chemical equation , visit ;
https://brainly.com/question/11231920
#SPJ11
calculate the molar solubility of agcl in a 1.0m nh3 solution
To calculate the molar solubility of AgCl in a 1.0M NH3 solution, the solubility product (Ksp) must be known. For AgCl, Ksp is 1.77 × 10^-10 at 25°C. AgCl dissociates as follows:AgCl (s) ⇌ Ag+ (aq) + Cl- (aq)The molar solubility of AgCl in pure water can be determined using the Ksp expression.
Let the concentration of Ag+ and Cl- in pure water be "x." Ksp = [Ag+][Cl-]Ksp = x * x = x^2x = √Kspx = √(1.77 × 10^-10) = 1.33 × 10^-5Molar solubility is the number of moles of solute dissolved in 1 L of the solution. Thus, the molar solubility of AgCl in water is 1.33 × 10^-5 M.Now, AgCl is added to a 1.0M NH3 solution. This increases the concentration of NH3 in the solution, and the NH3 binds to Ag+ to form a complex ion, Ag(NH3)2+.Ag+ (aq) + 2NH3 (aq) ⇌ Ag(NH3)2+ (aq)The equilibrium constant for this reaction is given by:Kf = [Ag(NH3)2+] / [Ag+][NH3]^2where Kf is the formation constant for the complex ion.The molar solubility of AgCl in the NH3 solution can be calculated using the Ksp and Kf expressions. To do this, we must make some assumptions:Assumption 1: Since AgCl is a sparingly soluble salt, its molar solubility will be much less than the concentration of NH3 in the solution. Thus, we can assume that the concentration of NH3 remains constant throughout the reaction.Assumption 2: Since the concentration of Ag+ is much less than the concentration of NH3, we can assume that the concentration of NH3 is not significantly affected by the formation of the complex ion. In other words, NH3 is not used up in the reaction, and its concentration remains constant. The first assumption allows us to treat the NH3 concentration as a constant, while the second assumption allows us to use the initial concentration of NH3 in the solution as the concentration of NH3 in the equilibrium expression. Thus, we can write:Kf = [Ag(NH3)2+] / [Ag+][NH3]^2Kf = [Ag(NH3)2+] / [Ag+][NH3]^2 = [Ag(NH3)2+] / (x * [NH3]^2)where x is the molar solubility of AgCl in the NH3 solution.To calculate x, we need to find [Ag+]. Since Ag(NH3)2+ is formed by the reaction of Ag+ and NH3, we know that:[Ag+] = [Ag(NH3)2+] / [NH3]^2Substituting this expression into the Kf expression gives:Kf = [Ag(NH3)2+] / (x * [Ag(NH3)2+] / [NH3]^2 * [NH3]^2)Simplifying this expression gives:Kf = [NH3]^2 / xSolving for x gives:x = [NH3]^2 / Kfx = (1.0M)^2 / (1.7 × 10^7) = 5.9 × 10^-14MTherefore, the molar solubility of AgCl in a 1.0M NH3 solution is 5.9 × 10^-14 M.
For more information on molar solubility visit:
brainly.com/question/28170449
#SPJ11
determine the number of grams of h2 formed when 250.0 ml of 0.743 m hcl solution reacts with 3.41 × 1023 atoms of fe according to the following reaction. 2HCl + Fe arrow H2+ FeCl2
Given data:Volume of HCl solution = 250.0 mL = 0.2500 LConcentration of HCl solution = 0.743 mNumber of atoms of Fe = 3.41 × 10²³.
The balanced chemical equation for the reaction of Fe with HCl is:Fe + 2HCl → FeCl₂ + H₂The molar ratio of Fe to H₂ is 1:1.According to the balanced chemical equation,2 moles of HCl produce 1 mole of H₂. Hence, 1 mole of HCl will produce 1/2 moles of H₂.The number of moles of HCl in 250.0 mL of 0.743 M HCl solution can be calculated as follows:Number of moles of HCl = Molarity × Volume of HCl solution= 0.743 mol/L × 0.2500 L= 0.186 molThe number of moles of H₂ produced can be calculated using the mole ratio as follows:Number of moles of H₂ = Number of moles of Fe= (3.41 × 10²³ atoms of Fe)/(6.022 × 10²³ atoms/mol)= 0.567 molHence, the number of moles of H₂ produced is 0.567 mol.The mass of 1 mole of H₂ is equal to the molar mass of H₂. The molar mass of H₂ is (2 × 1.008 g/mol) = 2.016 g/mol. The mass of H₂ can be calculated as follows:Mass of H₂ = Number of moles of H₂ × Molar mass of H₂= 0.567 mol × 2.016 g/mol= 1.143 gHence, the number of grams of H₂ formed is 1.143 g. Therefore, the correct option is (A) 1.143.
To know more about moles , visit ;
https://brainly.com/question/29367909
#SPJ11
Nitric oxide and nitrogen dioxide are found in photochemical smog. Nitrogen dioxide if formed from nitrogen monoxide in the exhaust of automobile engines. A possible mechanism for this reaction is given below. What is the rate law predicted by the mechanism? Reaction: 2 NO(g) + O2(g) -----> 2 NO2(g) Step 1 (fast and reversible): NO + NO <-----> N2O2 Step 2 (fast and reversible): N2O2 <-----> N + NO2 Step 3 (slow): N + O2 -----> NO2
The rate law predicted by the mechanism for the reaction is k [NO]^2 [O2]. Thus, the correct option is B.
The possible mechanism for the reaction of the formation of nitrogen dioxide from nitrogen monoxide in the exhaust of automobile engines is given as follows: Reaction: 2NO(g) + O2(g) → 2NO2(g)Step 1 (fast and reversible): NO + NO <-----> N2O2Step 2 (fast and reversible): N2O2 <-----> N + NO2Step 3 (slow): N + O2 → NO2Nitric oxide (NO) and nitrogen dioxide (NO2) are found in photochemical smog.
The reaction given above is an example of a gas-phase reaction mechanism. The slowest step is also referred to as the rate-determining step since the overall rate of reaction is determined by this slow step.
The rate law predicted by the mechanism is given below: Rate = k [NO]^2 [O2]The rate law predicted by the mechanism is directly proportional to the concentrations of the reactants in the slow step. Therefore,
the rate law predicted by the mechanism for the reaction is k [NO]^2 [O2]. Thus, the correct option is B.
to know more about nitrogen dioxide visit :
https://brainly.com/question/30459594
#SPJ11
the helium is heated from 9.0 °c to 79.0 °c and also expands from a
When helium is heated from 9.0 °C to 79.0 °C and expands from a volume of 3.50 L to 3.89 L, it is an indication that the process is an isobaric process. The reason for this is that the pressure remains constant throughout the process.
Isobaric processes are also referred to as constant pressure processes. It is a thermodynamic process in which the pressure remains constant while the volume changes. Heat is absorbed by the gas when it is heated, causing its molecules to gain kinetic energy. As the kinetic energy increases, the molecules' movement becomes more erratic, and they begin to collide with each other more frequently. As a result, the distance between them expands, resulting in an expansion in the volume of the gas. The ideal gas law states that PV=nRT where P is pressure, V is volume, n is the number of moles, R is the ideal gas constant, and T is temperature in Kelvin (K). In an isobaric process, pressure (P) is constant, and since n, R, and P remain constant, the ideal gas law can be simplified as: V/T = constant. This equation shows that if temperature (T) increases, then volume (V) must also increase in order to keep the constant value intact. In the given problem, the volume increased from 3.50 L to 3.89 L due to the heating of helium from 9.0 °C to 79.0 °C.
For more information on isobaric processvisit:
brainly.com/question/23781022
#SPJ11
Use the solubility curve to match each scenario with its correct saturation level. All scenarios are in 100g of water.
The curve represents saturation. Below the curve, the water is unsaturated. Above the curve, water is supersaturated. This means that more solute is present than the water can contain.
The line of the solubility curve indicates that the solution is saturated. A saturated solution is defined as a solution in which 100 g of solute is dissolved in 100 g of water. Simulations below this line indicate unsaturated solutions.
The difference between unsaturated and saturated solutes can be determined by adding very small amounts of solute to the solution. In unsaturated solutes, solutes will dissolve, and solutes in saturated solutes will not dissolve. In saturated solutes, crystals will form very quickly around the added solute.
To learn more about saturation, refer to the link:
https://brainly.com/question/28215821
#SPJ1
draw the lewis structure for ch3br and then determine the following:
The Lewis structure for CH3Br is shown below: 1. The type of hybridization around each carbon atom is sp3.2. The type of hybridization around the Br atom is sp3.3. The bond angle around each carbon atom is 109.5°.4. The bond length between the carbon and hydrogen atoms is 1.09 Å.5. The bond length between the carbon and bromine atoms is 1.94 Å.6. The molecule is polar due to the difference in electronegativity between the carbon and bromine atoms.
The Lewis structure of CH3Br consists of a central carbon atom bonded to three hydrogen atoms and one bromine atom, with the carbon atom forming a single bond with the bromine atom and possessing two lone pairs of electrons. All atoms in the structure have achieved an octet configuration, except for hydrogen, which follows the duet rule. This structure provides insight into CH3Br's chemical behavior and reactivity.
To know more about hybridization Visit:
https://brainly.com/question/29020053
#SPJ11
the magnetic field of an electromagnetic wave is given by (,)=(0.70 μt)sin[(9.00×106 m−1)−(2.70×1015 s−1)] calculate the amplitude 0 of the electric field.
The electromagnetic wave consists of an electric field and a magnetic field, both of which are perpendicular to each other. When an electromagnetic wave is propagated in a vacuum or air, the electric and magnetic fields are both perpendicular to the direction of propagation.
They are also both perpendicular to each other, so the electric field oscillates in a plane that is perpendicular to the plane in which the magnetic field oscillates. Hence, this wave is said to be transverse. If the wave is allowed to propagate in a conductor, the electric field will induce a current in the conductor, causing the energy of the wave to be absorbed by the conductor. The amplitude of the electric field is given as;E=B*Cwhere;E is the electric fieldB is the magnetic fieldC is the speed of lightTherefore;E= (0.70μT) * (3.00 × 10^8 m/s)= 210 × 10^4 V/m= 2.10 × 10^5 V/mTherefore, the amplitude of the electric field is 2.10 × 10^5 V/m.Note: The equation for the magnetic field was given as B = 0.70μT*sin[(9.00×106 m−1)−(2.70×1015 s−1)], where μT represents the magnetic flux density in Tesla.
For more information on electromagnetic wave visit:
brainly.com/question/29774932
#SPJ11
calculate δg∘ for this reaction at 25 ∘c. 3no2(g)+h2o(l)→2hno3(aq)+no(g)
The value of ΔG° (Gibbs free energy) for the given reaction is -275.6 kJ/mol.
The given reaction can be expressed by the following equation.
3NO2(g) + H2O(l) → 2HNO3(aq) + NO(g)
To calculate ΔG° of this reaction, we will require the ΔG° of formation for the reactants and products.
The equation is:
N2(g) + 3O2(g) → 2NO2(g) ΔG° = 51.5 kJ/mol
H2O(l) → H2(g) + 1/2O2(g) ΔG° = -237.1 kJ/mol
HNO3(aq) → H+(aq) + NO3-(aq) ΔG° = -174.8 kJ/mol
NO(g) → 1/2N2(g) + 1/2O2(g) ΔG° = 86.8 kJ/mol
Here, we see that there are 3 moles of NO2(g) on the left side and 2 moles of NO2(g) on the right side.
Hence, the ΔG° of the reaction will be negative (as there are more reactants than products) and will be calculated as:
ΔG° = ΣnΔG°(products) - ΣmΔG°(reactants)
ΔG° = [2 × ΔG°(HNO3(aq))] + [ΔG°(NO(g))] - [3 × ΔG°(NO2(g))] - [ΔG°(H2O(l))]
ΔG° = [2 × (-174.8 kJ/mol)] + [86.8 kJ/mol] - [3 × (51.5 kJ/mol)] - [-237.1 kJ/mol]
ΔG° = -275.6 kJ/mol
Therefore, the value of ΔG° for the given reaction is -275.6 kJ/mol.
Learn more about Gibbs free energy at: https://brainly.com/question/9179942
#SPJ11
Which of the following is true.
(A) During the water boiling process, potential energy of water molecules decreases.
(B) Boiling temperature increases when pressure decreases.
(C) There is no phase transition directly from solid to gas.
(D) During the freezing process, kinetic energy of water molecules does not change.
(B) Boiling temperature increases when pressure decreases is the statement which is true among the given options.
When water boils, it undergoes a phase transition from liquid to gas. This process requires the water molecules to absorb energy, which increases their kinetic energy and thus their temperature. The potential energy of water molecules remains constant during this process.
Boiling temperature, however, is affected by pressure. When pressure decreases, the boiling point of water decreases as well. This is because the reduced pressure means that less energy is required to overcome the atmospheric pressure and allow the water molecules to escape into the gas phase.
There is no direct phase transition from solid to gas (C) as this would require the water molecules to absorb a large amount of energy without passing through the liquid phase. Instead, the process involves sublimation, where the solid turns directly into a gas.
During the freezing process, the kinetic energy of water molecules decreases as they lose energy and slow down, eventually transitioning from liquid to solid. Therefore, (D) is false.
Learn more about kinetic energy here:
https://brainly.com/question/999862
#SPJ11
ammonia, initially at 5 bar, 40°c undergoes a constant specific volume process to a final pressure of 2.75 bar. at the final state, determine the temperature, in °c, and the quality.
The temperature of the ammonia in the final state is 172.63 K. The quality of the ammonia in the final state is 0.534.
To solve this problem, we need to use the First Law of Thermodynamics, which states that the change in internal energy of a system is equal to the heat added to the system minus the work done by the system.
Since the process is a constant specific volume process, the work done is zero. Therefore, the change in internal energy is equal to the heat added to the system.
We can use the ideal gas law to calculate the initial and final states of ammonia. From the ideal gas law, we know that PV = nRT, where P is the pressure, V is the volume, n is the number of moles of gas, R is the gas constant, and T is the temperature.
Using this equation, we can calculate the initial and final temperatures of ammonia. At the initial state, we have P₁= 5 bar and T₁ = 40°C. At the final state, we have P₂ = 2.75 bar. Since the process is constant specific volume, we know that V₁= V₂.
Therefore, we can calculate the final temperature, T₂, using the equation:
T₂ = (P₂/P₁) * T₁= (2.75/5) * 313.15 = 172.63 K
To calculate the quality, we need to know the enthalpy of saturated liquid and saturated vapor at the final temperature. We can use a steam table to find this information.
Assuming that the ammonia is in a saturated mixture, we can use the following equation to calculate the quality, x:
x = (h₂ - hf) / (hg - hf)
where h₂is the enthalpy of the final state, hf is the enthalpy of saturated liquid at the final temperature, and hg is the enthalpy of saturated vapor at the final temperature.
Using a steam table, we find that hf = -69.07 kJ/kg and hg = 309.83 kJ/kg at 172.63 K. We can also find that the enthalpy of the final state, h₂, is 112.43 kJ/kg.
Plugging these values into the equation, we get:
x = (112.43 - (-69.07)) / (309.83 - (-69.07)) = 0.534
Therefore, the quality of the ammonia at the final state is 0.534.
Learn more about First Law of Thermodynamics here:
https://brainly.com/question/32101564
#SPJ11
Calculate the solubility at 25 °C of AgCl in pure water and in a 0.0140 M AgNO_3 solution. You'll find K Round both of your answers to 2 significant digits.
The solubility at 25 °C of AgCl in pure water and in a 0.0140 M AgNO₃ solution is 1.9 ˣ 10 ⁻³ g / L
Kp of AgCl = 1.76 × 10 ⁻¹⁰
AgCl ⇔ Ag⁺ + Cl ⁻
1.76 ₓ 10 ⁻¹⁰ = s . s
s = 1.33 ˣ 10 ⁻⁵ M
In g/ L = s ˣ molar mass of AgCl
= 1.33 ˣ 10⁻⁵ ˣ 143
= 1.9 ˣ 10 ⁻³ g / L
AgCl ⇔ Ag ⁺ + Cl ⁻
s + 0.0140 s
Kap = (s + 0.0140) . s
1.76 ˣ 10 ⁻¹⁰ = 0.0140 ˣ s
s = 1.26 ˣ 10 ⁻⁸ M
In g/ L = molarity ˣ molar mass
= 1.26 ˣ 10 ⁻⁸ ˣ 143
= 1.8 ˣ 10 ⁻⁶ g/ L
How is solubility defined?
The development of new bonds between the solute and solvent molecules is referred to as solubility. Solubility is the maximum concentration of a solute that dissolves in a known solvent concentration at a given temperature in terms of quantity.
Solubility is affected by what?Solvency is impacted by 4 variables - temperature, strain, extremity, and atomic size. For the majority of solids that dissolve in liquid water, solubility increases with temperature. This is on the grounds that higher temperatures increment the vibration or motor energy of the solute atoms.
Learn more about Solubility:
brainly.com/question/23946616
#SPJ4
what is happening in the first step of the mechanism of the reaction between oxone, nacl and borneol?
In the first step of the mechanism of the reaction between Oxone, NaCl, and borneol, the cyclic hemiketal of borneol is oxidized by Oxone, which forms a ketone. Oxone is an oxidizing agent that is used in the organic synthesis of various organic compounds.
It contains peroxymonosulfate ions that are strong oxidizing agents and react with organic compounds to oxidize them. In the presence of NaCl, the oxidizing power of oxone is increased and its efficiency is enhanced.The reaction of Oxone, NaCl, and borneol occurs through a mechanism that involves two steps.
The first step is the oxidation of borneol by Oxone to form a ketone. The cyclic hemiketal of borneol is oxidized by oxone to form a ketone. The reaction takes place in two stages.In the first stage, oxone oxidizes the cyclic hemiketal of borneol to form a ketone. This is a chemical reaction that involves the transfer of electrons from the cyclic hemiketal of borneol to Oxone.
Oxone acts as an oxidizing agent and accepts the electrons from borneol to form the ketone. The reaction takes place in the presence of NaCl, which enhances the efficiency of the reaction.In the second stage, the ketone formed in the first stage reacts with oxone to form an ester. This reaction is also a chemical reaction that involves the transfer of electrons. The ketone reacts with Oxone to form a peroxyhemiketal intermediate, which then reacts with water to form an ester.
To know more about reaction, refer
https://brainly.com/question/25769000
#SPJ11
what is the classification of this bone according to its shape?
Bones can be classified based on their shape. There are five classifications of bone based on shape. These categories are as follows: long bones, short bones, flat bones, irregular bones, and sesamoid bones.
In order to determine the classification of a bone, we need to identify its shape. Therefore, we cannot determine the classification of a bone unless we know its shape. The shape of a bone is important because it can tell us a lot about its function. For example, long bones are found in the limbs and are responsible for providing support and leverage. Short bones are found in the hands and feet and are responsible for providing stability and support. Flat bones are found in the skull and are responsible for protecting the brain. Irregular bones are found in the spine and are responsible for providing support and flexibility. Sesamoid bones are found in the knees and are responsible for protecting the tendons.
Learn more about bones at https://brainly.com/question/23220780
#SPJ11
Place the following in order of increasing magnitude of lattice energy. Cao Mgo Srs Srs < MgO < Cao CaO < Mgo < Srs Srs < CaO < MgO CaO < Srs < Mgo O MgO < Call < Srs
Lattice energy refers to the energy released when ions join together to form a solid compound. The amount of lattice energy produced determines the strength of the ionic bond.
The greater the lattice energy, the stronger the bond, and the harder it will be to separate the atoms. Lattice energy can be influenced by many factors, including the charge on the ions, the size of the ions, and the arrangement of the ions.
The order of increasing magnitude of lattice energy is CaO < MgO < SrS.
The reason for this order can be explained by considering the size and charge of the ions. The smaller the ions, the closer they can be packed together, and the greater the lattice energy. Similarly, the greater the charge on the ions, the stronger the attraction between them, and the greater the lattice energy.
Calcium oxide (CaO) has the smallest ions, which are also the most highly charged (+2 and -2), so it has the highest lattice energy. Magnesium oxide (MgO) has slightly larger ions, but they are still highly charged (+2 and -2), so it has the second-highest lattice energy. Strontium sulfide (SrS) has the largest ions, and they are also the least highly charged (+2 and -2), so it has the lowest lattice energy.
Therefore, the correct order of increasing magnitude of lattice energy is CaO < MgO < SrS.
To learn more about energy visit;
https://brainly.com/question/1932868
#SPJ11
secondary alcohols are oxidized to group of answer choices aldehydes. esters. ethers. carboxylic acids. ketones.
Secondary alcohols are oxidized to ketones. Option D
What are the secondary alcohols?
Due to the nature of the chemical processes involved in the oxidation process, secondary alcohols are converted to ketones.
The elimination of two hydrogen atoms during oxidation causes the alcohol functional group (-OH) to change into a carbonyl group (C=O). The carbon atom with the -OH group attached becomes a secondary carbon center when it is connected to two more carbon atoms in secondary alcohols.
Learn more about secondary alcohols:https://brainly.com/question/29074176
#SPJ4
15. The medicine in the diagram above has molecules that are moving around each
other. The doctor needs to slow down the molecules enough to cause a phase
change. How will she do this, and how will this affect the medicine?
She transfers energy...
into the medicine until it is a liquid.
into the medicine until it is a gas.
out of the medicine until it is a solid.
out of the mèdicine until it is a liquid.
To slow down the molecules of the medicine and cause a phase change, the doctor needs to transfer energy out of the medicine until it is a solid.
She would expel energy from the medication until it solidified in order to accomplish this. The kinetic energy of the molecules is reduced by removing energy from the medication, usually by cooling or freezing. A phase transition from a liquid to a solid state is caused by this decrease in molecular mobility.
Compared to the more mobile molecules in the liquid phase, the slower-moving molecules in the solid phase will have less mobility to manoeuvre around one another. With the use of this procedure, the doctor is able to regulate the medication's physical state for a number of uses, including patient administration, storage, and preservation.
Learn more about phase transition, here:
https://brainly.com/question/29795670
#SPJ1
which of the following species exhibit resonance? no3−; so32−; po33− group of answer choices so32− and po33− no3−, so32−, and po33− no3− only po33− only no3− and so32−
the correct answer is: NO3− and SO32− species exhibit resonance. The species that exhibit resonance among the given options are NO3− and SO32−.What is Resonance? Resonance is defined as a phenomenon
that occurs when the two or more structures have the same energy and can be exchanged for each other via movement of electrons. Resonance helps to stabilize molecules by delocalizing electrons in molecules or ions. In the case of resonance, the resonance hybrid is a structure that is intermediate to the resonance structures. Resonance structures are structures in which the position of electrons in molecules or ions can be represented in more than one way. This is because electrons are delocalized in molecules or ions, which results in two or more resonance structures .The molecule NO3− contains three equivalent oxygen atoms, and each oxygen atom has one lone pair of electrons. The nitrogen atom is also connected to one of the oxygen atoms via a double bond, with each of the other two oxygen atoms connected to nitrogen via a single bond.SO32− ion also contains three equivalent oxygen atoms with a negative charge on each atom and one sulfur atom connected to one of the oxygen atoms via a double bond, with each of the other two oxygen atoms connected to sulfur via a single bond.PO33− is not exhibiting resonance because, unlike NO3− and SO32−, it only has one Lewis structure.
to know more about ions, visit
https://brainly.com/question/13692734
#SPJ11
draw a structural formula for the major organic product of the reaction shown below. h30 ether ch3ch2ch2ch=çcch2ch3 (ch3)2culi ci • you do not have to consider stereochemistry.
The structural formula of the major organic product of the given reaction is: C6H12
Given equation :
H30 ether CH3CH2CH2CH=ÇCCH2CH3 (CH3)2CuLi CI
The reaction given is a Grignard reaction. Grignard reagent acts as a nucleophile and attacks the electrophilic carbon atom of the carbonyl group and forms a carbinol. The carbinol intermediate then dehydrates and forms the alkene.
Let's draw a structural formula for the major organic product of the given reaction:
Therefore, the structural formula of the major organic product of the given reaction is shown below.
Learn more about structural formula from this link:
https://brainly.com/question/514499
#SPJ11
the equation below shows the decomposition of lead nitrate how many grams of oxygen are produced when 21.5 g no is formed?
To determine the number of grams of oxygen produced when 21.5 g of nitrogen dioxide (NO2) is formed in the decomposition of lead nitrate, convert the number of moles of O2 to grams using the molar mass of O2: Mass of O2 = (number of moles of O2) x (molar mass of O2).
2 Pb(NO3)2 -> 2 PbO + 4 NO2 + O2 From the balanced equation, we can see that for every 4 moles of NO2 produced, 1 mole of O2 is also produced. To find the number of moles of NO2, we can divide the given mass by the molar mass of NO2. The molar mass of NO2 is calculated as follows: Molar mass of N = 14.01 g/mol Molar mass of O = 16.00 g/mol (x2 since there are two oxygen atoms in NO2) Molar mass of NO2 = 14.01 g/mol + (16.00 g/mol x 2) = 46.01 g/mol. Now we can calculate the number of moles of NO2: Number of moles of NO2 = mass of NO2 / molar mass of NO2. Number of moles of NO2 = 21.5 g / 46.01 g/mol. Next, we use the mole ratio from the balanced equation to find the number of moles of O2 produced: Number of moles of O2 = (number of moles of NO2) / 4. Finally, we convert the number of moles of O2 to grams using the molar mass of O2: Mass of O2 = (number of moles of O2) x (molar mass of O2) By plugging in the values, we can calculate the mass of oxygen produced.
To learn more about oxygen, https://brainly.com/question/9611899
#SPJ11
the substance that is completely consumed in a reaction is called the ______.
The substance that is completely consumed in a reaction is called the limiting reactant or limiting reagent. A limiting reactant or limiting reagent is a substance that is completely consumed in a reaction. It limits the amount of product that can be produced since it gets consumed first before the other reactants.
Any excess of the other reactants will remain unchanged since the limiting reactant has been fully utilized. Hence, the quantity of the limiting reactant determines the amount of product produced. The limiting reactant in a reaction can be identified through stoichiometry calculations. The reactant that produces the least amount of product is the limiting reactant. Stoichiometry calculations involve determining the mole ratio between the reactants and products. By comparing the mole ratio of the reactants with the actual mole ratio, the limiting reactant can be identified. To summarize, the substance that is completely consumed in a reaction is called the limiting reactant or limiting reagent. The limiting reactant limits the amount of product that can be produced since it gets consumed first before the other reactants. The limiting reactant can be identified through stoichiometry calculations.
To Know more about reactants visit:
brainly.com/question/30129541
#SPJ11
use chemdraw to write the balanced chemical equation for this reaction. use chemical structures. no mechanism necessary.
The balanced equation represents that one molecule of ethanol and one molecule of acetic acid react to form one molecule of ethyl acetate and one molecule of water. The equation is now balanced as there are four carbon atoms, ten hydrogen atoms, and two oxygen atoms on both sides.
Chemical reactions occur when two or more substances combine and transform into a new substance with different physical and chemical properties. A chemical equation represents the transformation of reactants into products. The chemical equation is the symbolic representation of the chemical reaction. The chemical formulae of the reactants and products are written on the left and right sides of the equation, respectively. The coefficient represents the number of molecules or atoms of each substance involved in the reaction. The balanced chemical equation is essential as it follows the law of conservation of matter. According to the law of conservation of matter, matter cannot be created or destroyed; it can only change its form. Therefore, in a balanced chemical equation, the number of atoms of each element is equal on both sides of the equation. To write the balanced chemical equation for the given reaction, we can use ChemDraw. In this reaction, the two reactants are ethanol and acetic acid. They react to form the product, ethyl acetate. The chemical structures of the reactants and products are shown below: EthanolAcetic acid ethyl acetateThe balanced chemical equation for the reaction is: C2H5OH + CH3COOH → C4H8O2 + H2OThe reaction takes place in the presence of a catalyst, sulfuric acid. The balanced equation represents that one molecule of ethanol and one molecule of acetic acid react to form one molecule of ethyl acetate and one molecule of water. The equation is now balanced as there are four carbon atoms, ten hydrogen atoms, and two oxygen atoms on both sides.
To Know more about ethanol visit:
brainly.com/question/29294678
#SPJ11
Benzene has a heat of vaporization of 30.72 kJ/mol and a normal boiling point of 80.1°C. At what temperature does benzene boil when the external pressure is 405 torr?
A 251.9 K
B 720.7 K
C 924.2 K
D 333.2 K
Benzene will boil at 333.2 K temperature when the external pressure is 405 torr.The correct option d.
Heat of vaporization (ΔHvap) of benzene, ∆Hvap = 30.72 kJ/mol.Normal boiling point of benzene, Tbp = 80.1°C.External pressure of benzene, P = 405 torr.
The formula for boiling point is given as follows:BP = [(ΔHvap / R) * ln(Po / P)] + Tbp,
where R is the gas constant and Po is the normal atmospheric pressure.As we can see, we have everything except the boiling point.
So, we can rearrange the above formula to solve for BP as follows:BP = [(ΔHvap / R) * ln(Po / P)] + Tbp. = [(30.72 × 10³ J/mol) / (8.314 J/(mol·K)) × ln(760 torr / 405 torr)] + 80.1°C= (30.72 × 10³ / 8.314 × ln (1.8765)) + 80.1°C= 353.2 K.
Therefore, the answer is D) 333.2 K.
Benzene will boil at 333.2 K temperature when the external pressure is 405 torr.
To know more about Heat of vaporization visit:
brainly.com/question/31493083
#SPJ11
what is the ph of a solution where 50.0 ml of 0.050 m nh3 (kb = 1.8 * 10-5) is mixed with 12.0 ml of 0.10 m hydrobromic acid (hbr)?
The pH of the solution where 50.0 mL of 0.050 M NH3 (Kb = 1.8 * 10-5) is mixed with 12.0 mL of 0.10 M hydrobromic acid (HBr) is 5.57.
The pH of a solution where 50.0 ml of 0.050 M NH3 (Kb = 1.8 * 10-5) is mixed with 12.0 ml of 0.10 M hydrobromic acid (HBr) can be calculated as follows:
Step 1: Write the balanced chemical equationNH3(aq) + HBr(aq) → NH4Br(aq)Step 2: Find moles of NH3 and HBrMoles of NH3 = (50.0 mL)(0.050 mol/L) = 0.0025 molMoles of HBr = (12.0 mL)(0.10 mol/L) = 0.0012 mol
Step 3: Determine which of the two reagents will run out firstNH3(aq) is a weak base and HBr(aq) is a strong acid, so they will react to form NH4+ and Br- ions. But HBr(aq) will completely dissociate in water while NH3(aq) will undergo a partial ionization. Thus, HBr will be the limiting reactant and all of the 0.0012 mol of HBr will react with 0.0012 mol of NH3 to produce NH4Br.
Step 4: Calculate moles of remaining NH3Moles of NH3 left = 0.0025 mol - 0.0012 mol = 0.0013 mol
Step 5: Calculate concentration of NH4+ ionConcentration of NH4+ ion, [NH4+] = moles of NH4+ ion/volume of solutionMoles of NH4+ ion = moles of HBr used = 0.0012 molVolume of solution = 50.0 mL + 12.0 mL = 62.0 mL = 0.062 L[NH4+] = 0.0012 mol/0.062 L = 0.019 mol/L
Step 6: Write the equilibrium equation and expression for NH4+ ionNH4+(aq) + H2O(l) ⇌ H3O+(aq) + NH3(aq)Kb = [H3O+][NH3]/[NH4+]
Since Kb is given, we can find the Kb for NH4+ ion as follows:Kb * Kw/Ka = [H3O+][NH3]/[NH4+]1.8 * 10^-5 * 1.0 * 10^-14/5.6 * 10^-10 = [H3O+][0.0013]/[0.019][H3O+] = 2.7 * 10^-6pH = -log[H3O+]pH = -log(2.7 * 10^-6)pH = 5.57.
The pH of the solution where 50.0 mL of 0.050 M NH3 (Kb = 1.8 * 10-5) is mixed with 12.0 mL of 0.10 M hydrobromic acid (HBr) is 5.57.
To learn more about solution visit;
https://brainly.com/question/1616939
#SPJ11
consider the lewis structure for sf6. what is the hybridization on the s atom?
The hybridization on the S atom in SF6 is sp3d2.
In order to determine the hybridization on the S atom in SF6, we first need to draw the Lewis structure for SF6. The Lewis structure shows that the S atom is surrounded by 6 fluorine atoms, each of which is bonded to the S atom. There are no lone pairs on the S atom.
To determine the hybridization on the S atom, we need to count the number of electron groups (bonded atoms and lone pairs) around the S atom. In this case, there are 6 electron groups around the S atom. We then use the formula for hybridization, which is:
hybridization = number of electron groups
For SF6, the hybridization on the S atom is:
hybridization = 6
Therefore, the hybridization on the S atom in SF6 is sp3d2.
The hybridization on the S atom in SF6 is sp3d2, which means that the S atom is surrounded by six electron groups, including five hybrid orbitals and one unhybridized p orbital.
For more information on hybridization kindly visit to
https://brainly.com/question/29020053
#SPJ11