For coherent results, a parallel processing system needs a mesh communication network including multi-level cache, RAM, and storage for every processor. Software for parallel processing is difficult.
Explain the reasons for switch from sequential processing to parallel processing?Operators can be executed in either parallel or sequential fashion. Sequential operators operate on one processing node while parallel operators run on several.
The biggest drawback of employing this computing that it requires more time because just one instruction is being processed at a time. Parallel computing was developed to overcome this sequential computing drawback. Hardware with several cores and threads on a CPU is indeed not parallel computing. An entirely different architecture is needed for a parallel system. For coherent results, a parallel system needs a mesh communication network including multi-level cache, RAM, and storage for every processor. Software for parallel processing is difficult. During the development of the A-bomb in World War II, Dr. Richard Feynman created one of the most important parallel computing techniques.To know more about the parallel processing, here
https://brainly.com/question/13266117
#SPJ4
an application program interface (api) provides a procedure max, which returns the greater of its two integer arguments. a programmer would like to find the greatest of three integer values a, b, and c. which of the following expressions will produce the desired result in every case? Max (Max (a, b), c)
Max (a, b) - Max (b, c)
Max (a, b) + Max (b, c) – Max (a, c)
(Max (a, b) + Max (b, c)) / 2
The correct answer is Max (Max (a, b), c).an application program interface (api) provides a procedure max, which returns the greater of its two integer arguments.
For years 1 through 5, the number of registered users almost quadrupled each year, and then it grew at a roughly consistent rate after that. In general, a binary representation of the same value requires more digits than a hexadecimal representation. The best way to characterise machine learning is as a collection of coordinated and cooperating skills. The market for big data is expanding as a result of the enormous expansion in data as well as the rise in mobile applications and Internet of Things (IoT) devices.
To learn more about integer click the link below:
brainly.com/question/17329615
#SPJ4
over the last few years, an organization has brought up the need to replace old systems. while the organization has made these old systems function with various workarounds, custom middleware applications, and other methods to make up for their shortcomings, it has become increasingly apparent that they need to be replaced soon. which of the following security concerns does the company face if they continue to use the outdated systems? the age of the systems means they are accessible from virtually anywhere, making them vulnerable to security breaches from outside actors. the age of the systems means they run on outdated oss that are no longer supported, making security updates impossible to install. the age of the systems means they need numerous entry points from the outside, making the platforms' security impossible to configure. the age of the systems means they use insufficient hardware, making it impossible to secure communications between them and more modern devices.
All steps are listed below. Legacy systems refer to technology or software that is no longer actively developed or supported and which are considered to have fallen short of today's standards.
The required details for Legacy systems in given paragraph
These systems may not be able to keep up with current technology, may be vulnerable to security threats, or no longer provide the functionality you need to get your job done. Here are some examples of outdated systems: Operating systems such as Windows XP or Windows Vista , which are no longer supported by Microsoft and therefore do not receive updates or security fixes. Old versions of applications, e.g. B. Older versions of Adobe Photoshop or Microsoft Office that may not be compatible with newer operating systems and may not have the security features or functionality of newer versions. The company has several security-related issues if it continues uses outdated systems, including: The age of the systems means they "run on outdated operating systems that are no longer supported, making it impossible to install security updates. The systems' age of years means they require more external entry points, making it impossible to enforce the security platform. The systems age means they use insufficient hardware, making it impossible to implement the secure communication between them and more modern devices.
The system age means they can be accessed from virtually anywhere, making them vulnerable to Security breaches by third parties makes.
To learn more about the apps, visit:
brainly.com/question/2919814
#SPJ4
Which of the following commands shows the value of the lang environmental variable currently set for the language the operating system uses?
The value of a lang environmental variable, which is currently set to the operating system's language, is displayed by the echo $LANG command.
Which of the subsequent commands shows every environment variable?Printenv is the most commonly used command for displaying environment variables.Only that variable's value is displayed if the variable's name is supplied as an input to the command.Printenv displays a list of all configuration files, one variable per line, if no argument is given.
Which of the above commands is used to obtain the name of the current environment in our system?Use the env command to see your current environment variables.A global variable is an environment parameter that is available to all of your processes.
To know more about environmental variable visit:
https://brainly.com/question/28454834
#SPJ4
which of the following was the first release of microsoft windows in which the underlying operating system and the gui were no longer considered separate items?
The CVE programme was established in 1999 and is currently run by the MITRE firm with funding from the Department of Homeland Security (DHS) and the Cybersecurity and Infrastructure Security Agency of the United States (CISA).
When it was discovered that the 20-megabyte Flame virus—which is exceptionally huge for a virus—had been created as a highly precise industrial espionage weapon, it caused a stir within the technical world. The most popular port scanning programme is called "Nmap," which stands for "Network Mapper." It may be produced from source code or installed on Windows, Linux, MacOS, and is a favourite of system administrators. Malware known as logic bombs only operates when activated, such as on a certain day or time or after 25 consecutive logons to an account. Logic bombs are frequently included in viruses and worms to release their payload (malicious code) at a predetermined period or when a certain condition is satisfied.
To learn more about CVE programme click the link below:
brainly.com/question/29451810
#SPJ4
Use appropriate method calls from the List ADT to create the following list:
< 4 19 | 23 30 >
You should assume that L is passed to the function as an empty list.
The given code declares a List type of method called "buildList" that accepts the List type of the parameterized variable L.
What is an ArrayList?In Java, a redimensionable array is a class of ArrayList.
ArrayLists have the ability to dynamically adjust their size in built-in arrays.
The method mentioned can be defined as follows: Elements can be added to and removed from an ArrayList as needed to help the user manage this same memory.
public List buildList(List L)//creating the method buildList with the parameter List variable L
{
L.insert("30");//Calling insert method that takes a value in parameter.
L.insert("23");//Calling insert method that takes a value in parameter.
L.insert("19");//Calling insert method that takes a value in parameter.
L.insert("4");//Calling insert method that takes a value in parameter.
L.next();//calling next method that prints list value
L.next();//calling next method that prints list value
return L;//return list value L
}
Therefore, the given code declares a List type of method called "buildList" that accepts the List type of the parameterized variable L.
Know more about an ArrayList here:
https://brainly.com/question/8045197
#SPJ4
___represent the measurements collected regarding a geologic unit, whereas ___ are the proposed explanations for a collection of those measurements.
Data; interpretations
Data represent the measurements collected regarding a geologic unit, whereas interpretations are the proposed explanations for a collection of those measurements.
What is Data?
Data is information that has been converted into a form that is suitable for computer movement or processing. In the context of today's computers and transmission media, data is information that has been converted into binary digital form. It is acceptable to use data as either a singular or plural subject. The term "raw data" refers to data in its most basic digital format.
The popularity of the terms "data processing" and "electronic data processing" early on demonstrated data's importance in business computing, which, for a time, came to encompass the entire scope of what is now known as information technology. Specialization occurred throughout the history of corporate computing, and a distinct data profession emerged alongside the growth of corporate data processing.
To learn more about Data, visit: https://brainly.com/question/25704927
#SPJ4
the code segment below uses the procedure one word, goal reached, which evaluates to true if the robot is in the gray square and evaluates to falseotherwise. the program consists of 4 lines. begin program line 1: repeat until, open parenthesis, one word goal reached, open parenthesis, close parenthesis, close parenthesis line 2: open brace line 3: missing code line 4: close brace end program. which of the following replacements for missing code can be used to move the robot to the gray square? responses
As an alternative to or in addition to paging, segmentation is another method of allocating memory. In its most basic form, a program is divided into several sections, each of which is an independent entity that includes a subroutine or data structure. Segments differ in size from pages.
What is Segmentation?As an alternative to or in addition to paging, segmentation is another method of allocating memory. In its most basic form, a program is divided into several sections, each of which is an independent entity that includes a subroutine or data structure.Segments differ in size from pages. This necessitates that the MMU manage segmented memory in a different way than it would manage paged memory. A segment table is included in a segmented MMU to keep track of the memory-resident segments.Each segment table entry should contain the start address and segment size since a segment can be created at any one of several addresses and can be any size. While some systems have no restrictions on where a segment can start, others have. A segment must begin at an address with 6000 as its four low-order bits in the Intel X86 architecture, which is one limitation of this kind.Due to the implicit nature of these four bits, a system with this restriction would not be required to keep them in its segment table. It displays a condensed address translation system for segmented memory, as seen in the figure.To Learn more About segmentation refer to:
https://brainly.com/question/5545577
#SPJ4
You connected your laptop to a new wireless network and received an IP address automatically. Which of the following servers allowed this to occur?
Dynamic Host Configuration Protocol (DHCP) server
The DHCP (Dynamic Host Configuration Protocol) server allowed your laptop to receive an IP address automatically when connecting to a new wireless network. DHCP servers are responsible for assigning IP addresses to devices on a network.
What exactly is DHCP?
DHCP (Dynamic Host Configuration Protocol) is a network protocol used to automatically assign IP addresses and other network configuration information to devices on a network.
It allows devices to obtain necessary information from a DHCP server automatically, eliminating the need for manual configuration. DHCP is typically used on IP networks, and it is a common method of assigning IP addresses on home and small business networks.
To learn more about DHCP (Dynamic Host Configuration Protocol), visit: https://brainly.com/question/29457215
#SPJ4
use your fingers to zoom the display. issue a command. select an object on the screen. display a shortcut menu. move an object on the screen.
To zoom the display, use your fingers to pinch the screen to zoom in, or to spread the screen to zoom out. To issue a command, press and hold down the home button.
What is command?A command is an instruction given by a user to a computer or other device to perform a specific task or operation. Commands are typically entered by a user as a text string or through a graphical user interface (GUI) such as a menu. Commands can be simple, such as to open a file or complex, such as a set of instructions to execute a program or script. Commands can also be used to manipulate files and data, control an operating system, or to launch applications.
To select an object on the screen, press and hold down your finger on the object for a few seconds. To display a shortcut menu, press and hold down your finger on the object for a few seconds and then drag your finger up. To move an object on the screen, press and hold down your finger on the object and then drag your finger to the desired location.
To learn more about command
https://brainly.com/question/25808182
#SPJ4
The objectives of a(n) _____ degree typically include how to design processes to develop, manage, and disseminate information to help meet organizational goals.A) Information SystemsB) Information TechnologyC) Computer ScienceD) Computer Engineering
The goals of a degree in information systems often include developing, managing, and disseminating information in ways that support organizational goals.
What is Technology?Technology is the application of knowledge to the attainment of realistic objectives in a repeatable manner.
The term "technology" [1] can also refer to the outputs of such endeavors both physical tools, like utensils or machines, and immaterial tools, like software. Science, engineering, and daily living all depend heavily on technology.
Significant societal changes have been brought about by technological breakthroughs.
The earliest known technology is the stone tool, which was employed during prehistoric times.
This was followed by the ability to regulate fire, which helped to accelerate the development of language and the expansion of the human brain during the Ice Age.
The Bronze Age wheel's development paved the way for more advanced machinery and faster mobility. newest technological innovations, such as printing.
learn more about technology click here:
brainly.com/question/7788080
#SPJ4
In this assignment, you will create a set of classes that represent ingredients for pieces of sushi. If you have never eaten sushi or don't know what a "sushi boat" restaurant is, you should check out Kurama Express on Columbia St. near Franklin (next to Buns) to get an idea of what one looks like. Sushi is a type of Japanese cuisine, typically made out of raw seafood, rice, seaweed, and sometimes other ingredients. A sushi boat restaurant is one in which pieces of sushi are placed on colored plates and the plates are placed on a circular conveyer belt. This is often a moat of water with little boats on it strung together acting as a conveyor belt, hence the name "sushi boat". Customers are seated around the conveyor and pick up the plates they want as they go by. Different plates are assigned different prices.
First, read the comments in the code for the following interfaces defined in package a5 to understand the abstractions for ingredients, ingredient portions, and sushi:
* Ingredient
* IngredientPortion
* Sushi Create eight classes which implement the ```Ingredient``` interface called ```Avocado```, ```Crab```, ```Eel```, ```Rice```, ```Yellowtail```, ```Seaweed```, ```Shrimp```, and ```Tuna```. The characteristics of these classes are given in the following table:
Novice Create eight classes which implement the ```Ingredient``` interface called ```Avocado```, ```Crab```, ```Eel```, ```Rice```, ```Yellowtail```, ```Seaweed```, ```Shrimp```, and ```Tuna```. The characteristics of these classes are given in the following table:
| Class Name | Name | Price/Oz. | Calories/Oz. | Vegetarian? | Rice? | Shellfish? |
|------------|------|-----------|--------------|-------------|-------|------------|
| Avocado | "avocado" | $0.24 | 42 | true | false | false |
| Crab | "crab" | $0.72 | 37 | false | false | true |
| Eel | "eel" | $2.15 | 82 | false | false | false |
| Rice | "rice" | $0.13 | 34 | true | true | false |
| Yellowtail | "yellowtail" | $0.74 | 57 | false | false | false |
| Seaweed | "seaweed" | $2.85 | 105 | true | false | false |
| Shrimp | "shrimp" | $0.65 | 32 | false | false | true |
| Tuna | "tuna" | $1.67 | 42 | false | false | false |
This is about an assignment to create a set of classes that represent ingredients for pieces of sushi. The assignment includes creating eight classes that implement the "Ingredient" interface called "Avocado", "Crab", "Eel", "Rice", "Yellowtail", "Seaweed", "Shrimp", and "Tuna". Each class will have specific characteristics such as name, price per ounce, calories per ounce, whether it is vegetarian, whether it is rice, and whether it is shellfish.
The assignment also mentions that sushi is a type of Japanese cuisine typically made out of raw seafood, rice, seaweed, and sometimes other ingredients and a sushi boat restaurant is one in which pieces of sushi are placed on colored plates and the plates are placed on a circular conveyer belt.
(The program code will be attached in image because too many syntax.)
Implement Sushi Ingredient ClassesIt's an assignment for someone learning to code and it's applicable for anyone who wants to learn about how to implement classes for ingredients in sushi cuisine and how to represent sushi dishes. The assignment is not specific to any particular programming language or framework, it's a general assignment.
Learn more about Implement Sushi Ingredient Classes here:
https://brainly.com/question/23899760
#SPJ4
___in networking, the communications protocol that contains the physical address of a client or server station
ARP, or Address Resolution Protocol, is a method for translating a changing IP address into a machine's permanent physical address in a local area network (LAN). An alternative name for the physical machine address is a media access control (MAC) address.
What is Address Resolution Protocol (ARP)?In a local area network, the Address Resolution Protocol (ARP) is a method for translating a changing IP address to a fixed physical machine address (LAN). As a media access control (MAC) address, the physical machine address is also referred to.ARP basically converts 32-bit addresses to 48-bit addresses and the other way around. Because MAC addresses are 48 bits in size compared to 32 bits for IP addresses in IP version 4 (IPv4), this is required.The Open Systems Interconnection model's Layers 2 and 3 are where ARP operates (OSI model). On Layer 2 of the OSI model, or the data link layer, is where the MAC address is located. The network layer's Layer 3 contains the IP address.ARP can also be used for IP over various LAN technologies, including IP over ATM, FDDI, and Token Ring.To Learn more About Address Resolution Protocol refer to:
https://brainly.com/question/13068535
#SPJ4
The share phase of the data analysis process typically involves which of the following activities? Select all that apply.
1. Summarizing results using data visualizations
2. Creating a slideshow to present to stakeholders
3. Putting analysis into action to solve a problem
4. Communicating findings
In the share step of the data analysis process, findings are typically communicated, results are summed up using data visualizations, and a slideshow is made to be presented to stakeholders.
Which of the following tasks is a part of data analysis?The most utilized data analytics categories include statistical analysis, text analysis, predictive analysis, diagnostic analysis, and prescriptive analysis. The two subtypes of statistical analysis are descriptive analytics and inferential analytics.
Which six stages of data analysis are there?lists six phases or steps for data analysis: inquire, prepare, process, analyze, share, and act. By using them, you should be able to create a framework that makes making decisions and addressing problems a little bit simpler.
To know more about data visualizations visit:-
https://brainly.com/question/29976993
#SPJ4
which of the following tools for detecting malware in windows checks the digital signatures of system files and ensures that these are legitimate?
The following tools are used for Windows malware detection: Process Explorer.System files' digital signatures are examined to make sure they are authentic.
Which antivirus software is capable of detecting malware signatures?In heuristic-based detection, possible threats are compared against known viral signatures using an algorithm.Antivirus software that uses heuristic-based detection can identify both newly found viruses and viruses that have already been identified but have been updated or disseminated as new ones.
What instrument is used to look for and examine malware on endpoints?Technology platforms known as EDR tools enable quick analysis & containment for attacks on endpoints in addition to warning security teams of potentially harmful activities.A workstation or laptop used by an employee, a server, a cloud, a smartphone, or an IoT device are all examples of endpoints.
to know more about Windows malware visit:
https://brainly.com/question/14702333
#SPJ4
you have just installed a new hard drive in your desktop computer. which of the following power supply connectors is designed to provide power to your new hard drive? (select the correct connector.)15-pin SATA connector
The correct power supply connector designed to provide power to a new hard drive is the 15-pin SATA connector.
What are power supply connectors?Power supply connectors are devices that connect a power supply unit (PSU) to various components in a computer. The PSU converts the alternating current (AC) from the wall outlet into direct current (DC) which is used by the computer's components.
There are several types of power supply connectors, including:
ATX Main Connector: This is the main 24-pin connector that connects the PSU to the motherboard. It provides power to the CPU, memory, and other components on the motherboard.
ATX 12V Connector: This 4/8-pin connector provides additional power to the CPU. It is also known as the P4 connector or the AUX connector.
PCI-Express Connectors: These 6/8-pin connectors provide power to graphics cards that use the PCI-Express interface.
SATA Connectors: These connectors provide power to storage devices such as hard drives and solid-state drives that use the SATA interface.
Molex Connectors: These connectors provide power to devices such as fans, lights, and other components that do not require as much power as the devices mentioned above.
It's important to make sure that the power supply has the right connectors for the components in the system, and that the power supply has enough power to support the system.
SATA (Serial ATA) is the standard interface for connecting storage devices, such as hard drives and solid-state drives, to a computer's motherboard. The 15-pin SATA power connector provides power to the storage device, it is typically a L-shaped connector with 15 pins arranged in two rows.
It is important to note that there are other connectors like 4 pin molex and 4 pin PATA that are used in older computers and devices, but the 15-pin SATA connector is the most common one used in recent computers and devices.
To know more about hard drive visit:
https://brainly.com/question/14953384
#SPJ4
ahima identify the difference between assigning a number to a verbal description such as for a zip code and the activity of assigning a diagnosis or procedure code
Assigning a number to a verbal description, such as a ZIP code, is a process known as coding. activity of assigning a diagnosis or procedure code is a process known as medical coding.
The United States Postal Service (USPS) uses a system of postal codes called ZIP codes to distribute mail more effectively. A ZIP code is a numerical code consisting of five or nine digits that is assigned to a specific geographic area or address. The purpose of a ZIP code is to help the USPS sort and deliver mail more efficiently.
Medical coding is the process of converting verbal descriptions of diseases, injuries, and procedures into numerical codes.Medical codes are used to accurately classify and describe diagnoses and procedures for billing, data collection, and research purposes.
The main difference between assigning a number to a verbal description, such as a ZIP code, and the activity of assigning a diagnosis or procedure code is that the former is intended to improve mail delivery while the latter is intended to improve healthcare data collection and accuracy. ZIP codes are used to sort and deliver mail more efficiently, while medical codes are used to classify and describe diagnoses and procedures for billing, data collection, and research purposes.
AHIMA (American Health Information Management Association) is a professional association for health information management professionals. It provides education and certification for medical coding, as well as other health information management fields.
Learn more about AHIMA here:
https://brainly.com/question/30055660
#SPJ4
Which values are set for the following environment variables? Type echo $variable at the prompt to answer the question. The variables are case sensitive.
HOME: /root
LANG: en_US.UTF-8
SHELL: /bin/bash
TERM: linux
The values set for the following environment variables are as follows:
HOME: /rootLANG: en_US.UTF-8SHELL: /bin/bashTERM: linuxThese values can be confirmed by running the command "echo $variable" at the command prompt, replacing "variable" with the name of the environment variable you want to check (e.g. "echo $HOME" to check the value of the HOME variable).
To see the value of the HOME environment variable, type echo $HOME at the command prompt. The value should be "/root".
To see the value of the LANG environment variable, type echo $LANG at the command prompt. The value should be "en_US.UTF-8".
To see the value of the SHELL environment variable, type echo $SHELL at the command prompt. The value should be "/bin/bash".
To see the value of the TERM environment variable, type echo $TERM at the command prompt. The value should be "linux".
Learn more about environment variable here, https://brainly.com/question/17330666
#SPJ4
p.3 (15 pts) run the knapsack algorithm we discussed in the class to find the best solution that maximizes the profit of the knapsack described below. show all your work for full credit. the knapsack capacity
The Knapsack Algorithm is a combinatorial optimization problem in which we seek to maximize the value of a knapsack while remaining within its capacity.
The Knapsack AlgorithmThis can be applied to any problem where we need to maximize a given quantity while keeping within certain constraints.The algorithm begins by creating a list of all items that could be packed into the knapsack and their associated value. Next, the knapsack capacity is calculated and used to determine which items can be packed into the knapsack without exceeding its capacity.Then, for each item, the algorithm checks to see if the item will fit with the remaining capacity and if the item yields a higher value than the next best item in the list. If both conditions are met, the item is added to the knapsack and the knapsack’s capacity is reduced accordingly. The process is repeated until there are no more items that can be added to the knapsack without exceeding its capacity.Finally, the algorithm returns the list of items that were packed into the knapsack and the corresponding value. This solution is the best possible solution given the knapsack’s capacity and the items available.To learn more about The Knapsack Algorithm refer to:
https://brainly.com/question/30001335
#SPJ4
TRUE/FALSE. the main method tells the program where to begin running code as it is the entry or starting point for the program.
The following statement is true.
A compiler is a special program that translates a programming language's source code into machine code, bytecode or another programming language. The source code is typically written in a high-level, human-readable language such as Java or C++. A programmer writes the source code in a code editor or an integrated development environment (IDE) that includes an editor, saving the source code to one or more text files. A compiler that supports the source programming language reads the files, analyzes the code, and translates it into a format suitable for the target platform.
Compilers that translate source code to machine code target specific operating systems and computer architectures. This type of output is sometimes referred to as object code (which is not related to object-oriented programming). The outputted machine code is made up entirely of binary bits -- 1s and 0s -- so it can be read and executed by the processors on the target computers. For example, a compiler might output machine code for the Linux x64 platform or Linux ARM 64-bit platform.
to know more about coding
https://brainly.com/question/29453137
#SPJ4
The main method tells the program where to begin running code as it is the entry or starting point for the program.---- True
Programming language :
A special program called a compiler converts the source code of a programming language into machine code, bytecode, or another programming language. Most of the time, the source code is written in a high-level, readable language like Java or C++. A programmer writes the source code into one or more text files using a code editor or an integrated development environment (IDE) with an editor. The files are read, the code is analyzed, and a compiler that works with the source programming language converts it into a format that works with the target platform.
Compiler :
Specific operating systems and computer architectures are the targets of compilers that convert source code to machine code. Object code, which is not related to object-oriented programming, is another name for this kind of output. In order to be read and executed by the processors of the target computers, the machine code that is outputted is entirely composed of binary bits, which are ones and zeros. A compiler might, for instance, produce machine code for the Linux ARM 64-bit platform or Linux x64 platform.
Learn more about programming:
brainly.com/question/29453137.
#SPJ4
design a class named location for locating a maximal value and its location in a two-dimensional array. the class contains public data fields row,column, and maxvalue that
The programming language Java is object-oriented. Objects and classes, along with their characteristics and functions, are the foundation of everything in Java.
What is Java Code?A automobile, for instance, is an object in the real world. The vehicle is made up of characteristics like weight and color as well as functionalities like drive and brake.
For this task, we must write the JAVA code that is specified in the statement as follows:
See the attached image for the code.
The code can be written in a straightforward manner as shown below:
import scanner from java.util;
main public class
(String[] args) public static void main
new Scanner(System.in) = Scanner scan;
System.out.print ("Enter the array's row and column counts")
row, int, equals scan.nextInt();
Integer column equals scan.nextInt();
new double[row][column] array = double[][];
"Enter the array:" printed by the system;
(i++) for (i = 0; I array.length);
(j++) for (j = 0; j array[i].length;
range[i][j] = scan.nextDouble();
place place = place.locateLargest(array);
"The largest element in a two-dimensional array is:" + location.maxValue;" System.out.println;
The largest element is located at (" + location.row + ", " + location.column + "), according to System.out.println;
To Learn more About Java is object-oriented Refer To:
https://brainly.com/question/28732193
#SPJ4
on the first exam in an introductory psychology class, the grades are lower than professor mutola expected. she suspects that multitasking is to blame. she bans computers and smart phones from her class between the first and second exams. when she compares the two sets of exam scores, she finds a significant improvement on the second exam.
The grades on the first exam in an introductory psychology course aren't professor Mutola had anticipated. Multitasking, in her opinion, is to blame.
Which of the following represents an approach to enhancing internal validity?Blinding is a method that researchers employ to increase internal validity. Blinding is a method of randomizing the variables to lessen subject and researcher bias.
What endangers internal validity, exactly?Threats to internal validity include Internal validity is vulnerable to eight dangers, including attrition, regression to the mean, social interaction, instrumentation, maturation, and testing. How is internal validity threatened by attrition? Internal validity is at risk from attrition bias.
To know more about psychology class visit:-
https://brainly.com/question/23455172
#SPJ4
The provision of computing resources, including applications, over the Internet, so customers do not have to invest in the computing infrastructure needed to run and maintain the resources
The provision of computing resources, including applications, over the Internet, so customers do not have to invest in the computing infrastructure needed to run and maintain the resources Cloud computing .
What does "cloud computing" mean?
Cloud computing is the supply of computer services over the Internet ("the cloud"), including servers, storage, databases, networking, software, analytics, and intelligence, to provide speedier innovation, flexible resources, and scale economies.
A prime illustration of a public cloud is Microsoft Azure. With a public cloud, the cloud provider owns and manages all of the infrastructure (hardware, software, etc.) that it uses.
Which four forms of cloud computing are there?
Private clouds, public clouds, hybrid clouds, and multiclouds are the four primary categories of cloud computing. Platforms-as-a-Service (PaaS), Infrastructure-as-a-Service (IaaS), and Software-as-a-Service are the other three primary categories of cloud computing services (SaaS).
Learn more about Cloud computing
brainly.com/question/29737287
#SPJ4
from the list below, select all of the statements that are true regarding the ideal brayton and diesel cycles. multiple select question. the brayton cycle is executed in a closed loop of steady flow devices, while the diesel cycle occurs in a reciprocating piston-cylinder device.
1. The Brayton cycle is executed in a closed loop if steady flow devices, while Diesel cycle occurs in a reciprocating piston-cylinder device.
2. The heat rejection for the Brayton Cycle occurs at constant pressure, whereas heat rejection from the Diesel cycle occurs at constant volume.
what is Brayton cycle?
Assuming that the ideal Brayton Cycle begins with isentropic compression, put the remaining processes in order so they complete the closed-loop Brayton cycle.
2 . Constant - Pressure Heat Addition
3. Isentropic Expansion
4. Constant - Pressure Heat Rejection
The ratio of the cylinder volumes after and before the combustion process of the ideal Diesel cycle is called the Cutoff ( The ratio of the volumes at state 3 to the volume at state 2 is called the cutoff ratio) ratio.
The thermal efficiency of the Brayton cycle increases as a result of regeneration since less fuel is used for the same work output
learn more about Brayton cycle at
https://brainly.com/question/29410357
#SPJ4
What is the output of the following code?
import java.util.ArrayList;
public class ArraylistTest
{
public static void main(String[] args) {
ArrayList craft = new ArrayList ();
craft.add("scissors");
craft.add("paper");
craft.add("glue");
craft.remove("paper");
craft.remove(1);
System.out.println(craft);
}
}
A.
[paper]
B.
[glue]
C.
[scissors]
D.
[craft]
C. [scissors]
Explanation:
The given code is a Java program that creates an ArrayList of strings called "craft" and adds three elements to it "scissors", "paper" and "glue". After that the code removes the element "paper" from the list using the method remove("paper"). Then it removes the element of index 1 (which is "glue") from the list using the method remove(1).
After removing the two elements, the list is left with only one element "scissors" which is printed out by the final line of code:
System.out.println(craft);
It's worth noting that the ArrayList stores elements in order, and the elements are indexed starting from 0, so the first element is in the index 0, the second element is in the index 1, and so on.
Lane Games
ChatGPT Jan 9 Version. Free Research Preview. Our goal is to make AI systems more natural and safe to interact with. Your feedback
probiotic is a company that sells packaged milk through online portals. recently, the company received a generous funding with which it plans on establishing a separate floor for the finance department within the building. the network administrator requests you to submit a network document after subdividing the smaller network for finance into a separate network segment so that the transmissions in broadcast domains are limited to each network and there is less possibility of hackers or malware reaching remote, protected networks in the enterprise domain. identify under which of the following groupings will you place this network segment in this scenario?
In this scenario, the network segment for the finance department would likely be placed in a grouping known as a "segmented network" or a "network segmentation".
What is segmented network?
A segmented network is a type of computer network in which a network is divided into smaller networks or segments. This can be done for a variety of reasons, such as to increase security, improve performance, or to better organize and manage the network.
The segments are typically connected to each other through routers or other networking devices, allowing communication between the segments. This concept is also called as Network Segmentation.
To learn more about Network Segmentation, visit: https://brainly.com/question/9062311
#SPJ4
remembering that in the semantic parameter model of parameter passing (data flow in, out, inout) shown below, the return shown in the diagram, does not describe the syntactical return statement but rather pertains to the logical changes to the parameter itself: whether the given parameter is modifiable in the calling block, select all codes below in which data flow is inout.
Assume we have two functions, A and B, like the example above. When function A invokes function B, function A is referred to as the caller and function B as the callee.
What are Modes of passing parameters?There are various ways to pass parameters through a program.
Below are different modes.
Modes of passing parameters:
IN: sends data from the calling function to the calling function.
OUT: In the calling function, the callee function writes values.
IN/OUT: The caller function informs the callee function of the value of the variable, which the callee may update.
Thus, the option below has an in-out data flow.
//option 1
void giveMeValue(int* nPtr){
*nPtr=500;
}
//option2
void swapEls(int *a, int* b){
int temp =*a;
*a=*b;
*b=temp;
}
//option3
void cubeByReference(int* nPtr){
*nPtr= *nPtr**nPtr**nPtr;
}
To know more about parameters, visit:
https://brainly.com/question/29555936
#SPJ4
Print the two strings, firstString and secondString, in alphabetical order. Assume the strings are lowercase. End with newline. Sample output: capes rabbits
Coding Language: C
A user must input several names, which must subsequently be sorted alphabetically using the strcpy() method. Characters are gathered into a string.
How to arrange strings in alphabetical order in C?The method for putting the string in alphabetical order will be covered in this blog. Let's first attempt to comprehend the issue at hand before moving on to the solution.A program that alphabetically arranges a string is discussed in this article. Sorting a string alphabetically and displaying the results as output is the main goal.As an illustration, think about the strings below.Entry: whale
Produced: aehlw
Night entered
Ghint, the output
AlgorithmThe first step is for the user to enter a string in the application.The string is held once it is input and sent to the ascendingOrder() function via the fgets(ch, 50, stdin) function in step 2.Step 3: The for (i = 0; I SLength-1; i++) and for (j = i+1; j SLength; j++) loops then repeatedly loop through the characters, comparing each one to the others.Swap the characters if they don't go in the right order.Once every character is in the proper order, repeat the process, and the console will show the outcome.Analyzing Complexity
Time Complexity: O(n2), where n is the string's length that was entered.To Learn more About sorted alphabetically Refer To:
https://brainly.com/question/3483104
#SPJ4
given three floating-point numbers x, y, and z, output x java to the power of z, x to the power of (y to the power of z), the absolute value of y, and the square root of (xy to the power of z).
The code is given below. Java is a widely-used programming language that is class-based, object-oriented, and designed to have as few implementation dependencies as possible.
What do you mean by Java?
It was developed by Sun Microsystems (now owned by Oracle) in the mid-1990s and is widely used for building large-scale enterprise applications. Java is known for its "Write once, run anywhere" (WORA) principle, which means that Java code can be written once and run on any platform that supports Java without the need for modification. This is achieved through the use of the Java Virtual Machine (JVM), which interprets Java bytecode and executes it on the target platform.
Here is a sample Java code that performs the calculations you described:
public class Power Calculations {
public static void main(String[] args) {
double x = 1.5;
double y = -2.3;
double z = 3.2;
double x To The Power Of Z = Math.pow(x, z);
double x To The Power Of Y To The Power O f Z = Math.pow(x, Math.pow(y, z));
double absolute ValueOfY = Math.abs(y);
double square Root Of XY To The Power Of Z = Math.sqrt(Math.pow(x * y, z));
System.out.println("x to the power of z: " + xToThePowerOfZ);
System.out.println("x to the power of (y to the power of z): " + xTo The Power Of Y To The Power Of Z);
System.out.println("Absolute value of y: " + absolute Value Of Y);
System.out.println("Square root of (xy to the power of z): " + squareRootOfXYToThePowerOfZ);
}
}
To know more about code visit:
brainly.com/question/20517335
#SPJ4
write statements using the appropriate looping structure to count down from 100 to 1 with each number being displayed on a separate line.
Here is an example of doing the same thing with do-while loop:
$i = 100
do {
Write-Host $i
$i--
} while ($i -gt 0)
The first example uses a for loop, where the initial value of the variable is set to 100, the loop continues as long as the value of the variable is greater than 0, and the variable is decremented by 1 in each iteration. The second example uses a while loop, where the initial value of the variable is set to 100 and the loop continues as long as the value of the variable is greater than 0. The variable is decremented by 1 in each iteration.
The last example uses a do-while loop, where the initial value of the variable is set to 100 and the loop will run at least once and continue as long as the value of the variable is greater than 0. The variable is decremented by 1 in each iteration.
Learn more about loop: https://brainly.com/question/14390367
#SPJ4
TRUE/FALSE. one eoc function is to provide coordinated support to incident command, on-scene personnel, and other eocs, if needed.
One of the functions of the EOC is to provide coordinated support to the task force, field personnel and other EOCs when needed. The following statement is true.
The required details for EOC function in given paragraph
What is EOC function?
The Emergency Operations Center (EOC) serves a critical role in every phase of emergency management, from being the hub for all coordination during an incident to facilitating and directing recovery/clean-up. However, the EOC does not manage an incident — it coordinates.
Various situations will trigger the EOC’s opening, including emergencies that require resources beyond what local capabilities can handle; lengthy crisis situations; when major policy decisions will or might be needed; when a local or state emergency is declared; and when the EOC’s activation will be advantageous to successful management of an incident.
To know more about EOC
brainly.com/question/13121212
#SPJ4