identify all resonance structures for the following radical. there may be more than one correct anwserTo receive credit, make sure to select all that apply.

To neutralize 23.5 mL of a 0.145 M barium hydroxide solution, 23.9 mL of a 0.284 M hydrochloric acid solution is needed.

What does barium hydroxide serve?

Barium hydroxide is used to titrate weak acids, especially organic acids, in analytical chemistry. In contrast to the alkali hydroxides, barium carbonate creates clear, carbonate-free aqueous solutions because it is insoluble in water.

Acidity of barium hydroxide

When heated to 800 °C, barium hydroxide turns into barium oxide. Barium carbonate is produced when carbon dioxide reacts with it. Its strong base causes its extremely alkaline aqueous solution to go through neutralization reactions with acids.

Briefing:

The equation is given as:

Ba(OH)₂    +  2HCl     ------>   BaCl₂    +   2H₂O

from the equation it is clear that :

1mole of Ba(OH)₂  = 1 mole of HCl  

number of moles of Ba(OH)₂ = volume × Molarity

                          =  0.0235 × 0.145

                         = 0.0034 mol

Therefore, number of moles of HCl = 2× 0.0034 mol = 0.0068 mol

volue of HCl = moles / Molarity

                      = 0.0068 / 0.284

                       = 0.0239 L = 23.9 mL

Thus, The volume of a 0.284 M hydrochloric acid solution is required to neutralize 23.5 mL of a 0.145 M barium hydroxide solution is 23.9 mL.

To know more about barium hydroxide visit:

https://brainly.com/question/27309134

#SPJ4

15.10%  is the percent by mass of sugar in the original mixture.

given;

sugar mass= 10.40 g

nacl mass= 58.44 g

mass% of sugar= 10.40/10.40+58.44

mass% of sugar=10.40÷68.84×100

mass% of sugar=15.10%

Mass conservation is one of the fundamental laws of chemistry. Every time a reaction occurs, the mass of the products entering the reaction and the mass of the products leaving the reaction are the same. The quantity of matter in an object is expressed in terms of mass. Typically, mass is expressed in kilograms (kg) or grams (g) (kg). No matter where in the universe it is or how much gravitational force is exerted on it, mass is a measure of how much matter there is. In contrast to an object's weight, which is a force that depends on gravity, an object's mass is constant regardless of the situation. Your mass on the moon and the earth are the same. You weigh roughly one-sixth as much on the moon as you do on the earth.

To know more about  mass visit : brainly.com/question/5661976

#SPJ4

The changes that people can make to decrease emissions in the sectors that produce the most methane is to reduce the drilling for petroleum.

Methane is a hydrocarbon gas that is produced from the decomposition of plant matter in the absence of air.

Methane is a major constituent of natural gas that occurs in combination with petroleum.

Hence, methane gas is produced during the drilling of petroleum.

The release of methane gas into the atmosphere poses a major threat to the environment due to its effect on global warming.  This is because methane is much more powerful than carbon dioxide when it comes to holding heat and elevating temperatures.

Learn more about methane at: https://brainly.com/question/25649765

#SPJ1

Water molecules are the species that also are created on this end of the cell. The total reaction is referred to as a redox reaction.

The research of the correlation of electrical electricity and chemical reactions is the focus of the branch of chemistry known as electrochemistry. Oxidation process are those in which electric currents are either generated or received.

The typical 1.5-volt cell, which powers numerous electrical devices like TV remote controls and clocks, is an illustration of an electrochemical cell. Copper ions or pv cells are those that may produce an electric current as a consequence of chemical reactions taking place inside of them.

To know more about Electrochemical visit:

https://brainly.com/question/9653454

#SPJ4

Geometry around Carbon atom is Lewis structure

Assuming ideal gas, we calculate the number of moles.

PV = nRT

n = PV / RT

n = (1.10 atm) (10 x 10^-3L) / [(0.08205746 L atm / mol K) (289 K)]

n = 4.64 x 10^-4 mol

So, the molar mass is:

molar mass = 0.02877 grams / 4.64 x 10^-4 mol

molar mass = 62.02 g/mol

The only possible combination is : C2F2

C = 12 * 2 = 24

F = 19 * 2 = 38

24 + 38 = 62 g/mol

So, The molecular formula of C2F2 is 62g/mol

Lewis structure if C2F2 is attached below the answere;

What is molecular formula of compound?

The molecular formula of a molecular compound is a chemical formula that shows the number of different atoms present in a molecule. For example, in CO₂, the subscript under oxygen shows that there are two atoms of oxygen present, whereas the lack of subscript under carbon shows it has only one atom of carbon present.

To learn more about molecular formula visit here ; brainly.com/question/28647690

#SPJ4

The sample contains number of moles of gas is 0.39 mol. The mass of the helium is 1.56 g.

Given,

Volume of the gas = 30L

Pressure = 2.1atm

Temperature = 298K

R = 0.0821 L.atm/(mol.K)

To find:

Number of moles = ?

Mass of helium = ?

Solution:

To find the mass of helium in the container, use the expression below:

Mass of helium  = number of moles x molar mass

Using the ideal gas equation;

PV = nRT

Where,

P is the pressure

V is the volume

n is the number of mole

R is the gas constant

T is the temperature

Substitute the values and solve for n;

2.1 x 30  = n x 0.0821 x 298

⇒ n = 24.4658 / 63

⇒ n = 0.39

Now,

molar mass of He = 4g/mol

Now, solve;

Mass of helium  = 4 x 0.39 = 1.56g

Hence, the mass of the helium is 1.56 g.

Learn more about mass of helium from the link given below.

https://brainly.com/question/18848282

#SPJ4

According to Arrhenius definition a compound is an acid when, in aqueous solution it can releases protons. and  a compound is a base when, in aqueous solutions it can releases hydroxides anions.

According to Arrhenius, the acids are the hydrogen-containing compounds which give H+ ions or protons on dissociation in water and bases are the hydroxide compounds which give OH− ions on dissociation in water.

Arrhenius theory is only applicable only in the aqueous solution, for example, according to the Arrhenius theory, HCl is an acid in the aqueous solution but not in benzene, even though it donates H +  ion to the benzene. Also, under Arrhenius’s definition, the solution of sodium amide in liquid ammonia is not alkaline, even though amide ion deprotonates the ammonia.

So, for the acidic and basic properties, the presence of water is necessary.

This theory does not explain acidic and basic character of substances in non-aqueous solvents.

In case of HClO4 when it is subjected to dissociation it produces hydronium ion in the solution and hence it can be termed as an acid.

To know more about Arrhenius definition

https://brainly.com/question/13184258

#SPJ4

The solubility of the potassium nitrate will increase as we increase the temperature because increases the kinetic energy of solute particles. More KNO₃ will dissolve in the solution and makes it unsaturated.

Solubility can be described as the maximum amount of Solute that can dissolve in a known quantity of solvent at a particular temperature. By changing the temperature we can increase the solubility of a solute. Sparingly soluble solids or liquids can be completely liquified by raising the temperature.

Solid solubility depends on the nature of the solute and the solvent. Substances such as sugar, common salt (NaCl), etc dissolve in water while substances such as naphthalene do not dissolve in water.

The solubility of potassium nitrate KNO₃ increases with an increase the temperature but the increasing temperature of NaCl solution does not show much change in the solubility of NaCl.

Learn more about solubility, here:

https://brainly.com/question/8591226

#SPJ1

In general, I was able to ID most of the compounds based on the materials and the images provided but not positively 100% because there are compounds that do not show up using only the NMR spectroscopy.

A compound is a substance made up of two or more components. Water, carbon dioxide, and table salt are examples of compounds.

In chemistry, a compound is a substance composed of two or more different chemical elements combined in a definite ratio. When elements come together, they react with each other to form unbreakable chemical bonds.

These bonds are formed when electrons are shared or exchanged between atoms.

Learn more about compounds here:- https://brainly.com/question/26487468

#SPJ4

Methanol and KCl are soluble in water. The maximum amount of a chemical that will dissolve in a given amount of solvent at a given temperature is referred to as its solubility.

N-hexane smells like petroleum and is a clear, colourless liquid. -9 °F flash points.

As a result of hydrogen bonds between methanol and water molecules, methanol is soluble in water.

Water readily dissolves KCl.

Ionic in nature, KCl can only dissolve in polar solvents like water. The adage "like dissolves like" can be used to generalise this. Because benzene is a nonpolar solvent, KCl cannot be dissolved in it.

Because they are soluble in organic solvents and are absorbed and transported similarly to fats, vitamins A, D, E, and K are referred to as fat-soluble vitamins.

To know more about Methanol, visit:

https://brainly.com/question/24077457

#SPJ4

Answer:

Block A has the greatest density.

Explanation:

Three blocks are shown: Three blocks are shown.

Block A has mass 3 kilograms, length 6 centimeters, height 4 centimeters, and width 2 centimeters.

Block B has mass 1 kilograms, length 6 centimeters, height 2 centimeters, and width 4 centimeters.

Block C has mass 2 kilograms, length 2 centimeters, height 6 centimeters, and width 4 centimeters.

Which statement is correct?

- Block A has the greatest density.

- Block B has the greatest density.

- The density of Block A is equal to the density of Block B.

- The density of Block B is equal to the density of Block C

0.375 L volume of gas are produced if 1.00 g. of nahco3 decomposes at 29 degrees c and 769 torr

moles=0.011

p=769 torr

v=?

temperature=302K

PV=nRT

V=nRT/P

V=0.11×8.3×302÷769

V=0.375 L

The volume of an object in three dimensions is the area occupied within its boundaries. It is referred to as the object's capacity on occasion. The amount required to fill an object can be determined by finding its volume, for example, how much water is required to fill a bottle, aquarium, or water tank.

The most fundamental and frequent form of a three-dimensional shape is a sphere. We frequently encounter spheres in the form of balls, globes, decorative lights, oranges, etc.

To know more about  volume  visit :https://brainly.com/question/24189159

#SPJ4

The equation that reflects combustion is the equation in Option B.

We know that a combustion reaction has to do with a kind of reaction that involves the burning of a substance in oxygen. As such, when the substance is burnt we have carbon dioxide and water produced.

In this case, we have to look at the equations as they have been written and then try to know which of them has to do with the burning of a substance in oxygen and this would be the  Option B. It is the burning of an organic compound.

Learn more about combustion:https://brainly.com/question/15117038

#SPJ1

Chain fraction is styrene and unknown repeat units in an alternating copolymer, followed by each type of repeat unit. If the other is Styrene, a repeat unit of an alternating copolymer forms.

With the chemical formula C6H5CH=CH2, styrene is an organic substance. Although older samples may appear yellowish, this benzene derivative is an oily, white liquid. Although large concentrations have a less savoury flavour , the chemical readily evaporates and has a sweet smell of styrene. A copolymer is a polymer produced from more than one type of monomer in polymer science. Copolymerization is the process by which monomers are polymerized into copolymers. Bipolymers are the name given to copolymers created through the copolymerization of two monomer types. The formula for m is as follows: m = Mn / Dp m = 250000 / 3420 = 73.09g/mol.

Learn more about styrene here

https://brainly.com/question/14546335

#SPJ4

0.0102 moles Na₂CO₃ is  1.08g of Na₂CO₃ are necessaries .

Define Stoichiometry .

The quantitative study of the reactants and products involved in a chemical reaction .

What is a mole ?

A standard scientific unit for measuring large quantities of very small entities such as atoms, molecules, or other specified particles.

How to calculate the molecular weight of a given compound ?

Count the number of atoms of each element, and then multiply that number by the element's atomic weight.

Based on the reaction :

CaCl₂ + Na₂CO₃ → 2NaCl + CaCO₃

1 mole of CaCl₂ reacts per mole of Na₂CO₃

Further we are suppose to calculate number of moles of CaCl2•2H2O present in 1.50 g.

To solve this question we must find the moles of CaCl2•2H2O using its molar mass (147.0146g/mol).

No. of moles = Moles CaCl₂ = Moles of Na₂CO₃ necessaries to reach stoichiometric quantities.

Then find then the mass we must use molar mass of Na₂CO₃ (105.99g/mol):

Moles CaCl₂.2H₂O:

1.50g * (1mol / 147.0146g) = 0.0102 moles CaCl₂.2H₂O = 0.0102moles CaCl₂

Moles Na₂CO₃:

0.0102 moles Na₂CO₃

Mass Na₂CO₃:

0.0102 moles * (105.99g / mol) =

1.08g of Na₂CO₃ are present

Learn more about Stoichiometry by :

https://brainly.com/question/14935523

#SPJ4

Barium-131's radiation level won't reach 1/4 of its initial level for 24 hours.

ln[A] t = -kt + ln[A] 0 is the integrated rate rule for the first-order reaction A's products.

A straight line is produced when the natural log of [A] is plotted as a function of time since this equation has the form y = mx + b.

How is the length of a half-life determined?

The amount of time needed for the reactant concentration to drop to half its initial value is known as the half-life of a reaction. A first-order reaction's half-life is a constant that is correlated with its rate constant:

t 1/2 = 0.693/k.

To know more about rate constant, visit:

brainly.com/question/20305871

#SPJ4

After doing the paper chromatography the pigments are separated at different levels, these are carotene,  green chlorophyll etc.

The lipstick obtained from the bad scene is subjected to paper chromatography and a chromatogram is then obtained. Lipstick is having many coloured pigments as the active ingredients. So this active ingredients separate at different rate depending upon its partition coefficient. The obtained chromatogram is considered as standard and the it's RF values are calculated. Rf values are nothing but the dividing the distance travelled by the solute by the distance travelled by solvent front. The obtained are values are then noted.

The plants consist of different coloured pigments. The primary function of the colour pigments is to absorb maximum frequencies of light and also they can reflect the same. The pigments play their role during the process of of photosynthesis which requires the presence of sunlight. The required amount of light is absorbed by this colour pigments typically the green chlorophyll and several other pigments. These coloured pigments are known as the biological pigments.

Learn more about chromatography here:-https://brainly.com/question/1394204

#SPJ4

The statement is incomplete so diagram can't be drawn for curved arrows to the reactant side of the given SN2 reaction to indicate the flow of electrons.

The product species to show the balanced equation, including nonbonding electrons and formal charges and to draw in the leaving group as well as the main organic product, and  show the lone pairs and formal charge on the leaving group.

In a covalent bond when a pair of valence electron remains unshared with another atom is referred to the Lone pair.

SN2 reaction is the type of mechanism in chemical reaction in which one bond is broken and other is done in one step.

To know more about lone pairs visit

https://brainly.com/question/24174604

#SPJ4

Malonyl CoA regulates a variety of enzymes, including fatty acid synthase, acetyl-CoA carboxylase, and carnitine palmitoyltransferase I.

Malonyl CoA is an important regulatory molecule that is involved in the control of fatty acid synthesis. It is the precursor molecule to acetyl CoA and is produced in the cytosol of cells from acetyl CoA by the enzyme acetyl-CoA carboxylase. Malonyl CoA then serves as a substrate for a variety of enzymes, which are regulated by their levels.

One of the enzymes that Malonyl CoA regulates is fatty acid synthase (FAS). FAS catalyzes the conversion of acetyl CoA and malonyl CoA into long-chain fatty acids. The enzyme is activated when Malonyl CoA binds to the active site, which induces a conformational change in the enzyme that increases the affinity of the enzyme for its substrate.

Another enzyme that Malonyl CoA regulates is acetyl-CoA carboxylase (ACC). ACC catalyzes the carboxylation of acetyl CoA to form malonyl CoA. This enzyme is regulated by Malonyl CoA, as the presence of Malonyl CoA in the active site of the enzyme inhibits its activity. This serves to prevent the production of excessive amounts of Malonyl CoA, which could otherwise lead to excessive fatty acid synthesis.

Finally, Malonyl CoA also regulates the enzyme carnitine palmitoyltransferase I (CPT-I). CPT-I is responsible for the transport of long-chain fatty acids across the mitochondrial membrane, a process that is necessary for the oxidation of fatty acids. Malonyl CoA binds to CPT-I, inhibiting its activity and thus preventing fatty acid oxidation. This serves to maintain the levels of Malonyl CoA in the cytosol, ensuring that it can be used for fatty acid synthesis.

To know more about acetyl CoA, click below:

https://brainly.com/question/14510638

#SPJ4

Answer: lightbulb, lamp, nightlight

Explanation:

Answer: phytate i believe is the answer

The hybridization of the oxygen atom labeled x in the structure below is sp2.

One s orbital and two p orbitals combine to generate three sp2 orbitals, each of which has 33% s character and 67% p character. This process is known as sp2 hybridization. When three groups of electrons surround an atom, this form of hybridization is necessary.

One electron in the s orbital is promoted to one of the 2p atomic orbitals as part of the sp2 hybridization, which is the mixing of one s and two p atomic orbitals. These two atomic orbitals combine to form three new hybrid orbitals that are equally energetic. The energy of the hybrid orbitals is higher than the energy of the s orbital, lower than the energy of the p orbitals, but closer to the energy of the p orbitals. Trigonal structures are produced by the newly generated hybrid orbitals, giving the molecule a 120-degree molecular geometry.

Know more about hybridization at:

https://brainly.com/question/28468454

#SPJ4

The answer to the question is that a metals cools from 225°C to 25°C while releasing 160 j of thermal energy. The metal's specific heat becomes c = 0.16 J/g°c if its mass is 5.0 g.

A metal is a substance that exhibits a shiny appearance when freshly processed, polished, or shattered, and transmits both heat and electricity rather well.

Given:

T₁ = 225°C

T₂ = 25°C

q = -160 J

m = 5.0 g

As we know,

q = mcΔT

Now,

-160 = 5*c*(T₂-T₁)

-160 = 5*c*(25-225)

c = -160/5(-200)

c = 0.16 J/g°c

To know more about Metal visit:

https://brainly.com/question/29400906

#SPJ4

The bond angle is impacted by the presence of a lone pair of electrons at the core atom.

Why do some compounds have bond angles that deviate from expectations?

Several factors can lead to deviations from the optimum bond angles of a molecular form. The size of the involved atoms, the number of lone pairs, the number of bonds, the size of the groups attached to the central atom, and the environment in which the molecule is situated are just a few of the factors to consider.

What component(s) influences bond length and bond angle?

The length of the bond depends on how many electrons are bonded (the bond order). further bonds ordered,

To know more about molecules

visit:

https://brainly.com/question/1264297

#SPJ4

The volume of Hydrogen gas is 3.88L

The mass of aluminium = 3.12 g

Molar mass of aluminium = 26.98 g/mol

Calculating the number of moles -

Number of moles = Given Mass/Molar Mass

= 3.12/26.98

= 0.116 mol

Thus,

By Stoichiometry of the reaction:

Two moles of aluminium produce three moles of hydrogen gas. Thus,  0.116 moles of aluminium will produce -

= 3/2 × 0.116

= 0.173 mol

Calculating the volume of hydrogen gas produced by the equation -

PV = nRT

V = nRT/P

Using the standard temperature of gas = 273K

= 0.173 × 0.0821 × 273K/1 atm

= 3.88

Read more about Stoichiometry on:

https://brainly.com/question/22685837

#SPJ4

A sample in a spectrophotometer gives a percent transmittance of 37.5 %.  the absorbance of the sample is 0.425

Given that :

a percent transmittance = 37.5 %

The absorbance of the sample expression is given as :

Absorbance = - log (T)

where T = transmittance

Absorbance = - log ( percent transmittance / 100)

Absorbance = - log ( 37.5 / 100 )

Absorbance = - log (0.375 )

Absorbance = - ( -0.425 )

Absorbance = 0.425

Thus, the absorbance for the percent transmittance of 37.5 % is 0.425. the percent transmittance in the spectrophotometer is the percentage of light that passes through solution.

T learn more about Absorbance here

https://brainly.com/question/29441387

#SPJ4

it is used to validate facts, estimates, and relationships.

The goal of quantitative research methods is to gather numerical data that can be used to quantify variables. The results of quantitative research are unbiased and conclusive because the data is statistically structured. It employs a grounded theory approach that depends on data collection and methodical analysis.

In contrast to qualitative research, which deals with words and meanings, quantitative research is concerned with figures and statistics. You can measure variables and test hypotheses systematically using quantitative methods. You can investigate ideas and experiences in greater detail using qualitative methods.

Learn more about quantitative research here:

https://brainly.com/question/22036535

#SPJ4

The product of water and acetic anhydride is acetic acid.

What is acetic acid?

Acetic acid is also known as ethanoic acid, ethylic acid, vinegar acid, and methane carboxylic acid; it has the chemical formula of CH3COOH. It is the second simplest carboxylic acid.

Which chemical reaction involves the reaction of water and acetic anhydride?

Salicylic acid is reacted with an excess of acetic anhydride to produce aspirin. As a catalyst, a small amount of a strong acid is utilized, which speeds up the reaction. With the addition of water, the excess acetic anhydride will be quenched (reacted).

In this reaction, One equivalent of salicylic acid reacts with one equivalent of acetic anhydride to form aspirin. The reaction mixture still contains the residual acetic anhydride. Acetic anhydride is easily hydrolyzed during the work-up process to create acetic acid, which is freely soluble in water. The filtrate from the separation of crude aspirin will contain the leftover acetic anhydride that has been hydrolyzed to acetic acid.

The product of water and acetic anhydride is acetic acid.

To know more about  acetic acid, check out:

https://brainly.com/question/15231908

#SPJ4

Carbon tetra chloride (CCl4) substances is more likely to dissolve in benzene (c6h6)

The chemical name for carbon tetrachloride, sometimes referred to as tetrachloromethane and recognized by the IUPAC, carbon tet in the cleaning business, Halon-104 in firefighting, and Refrigerant-10 in HVACR, is CCl4. It is an organic compound. It has an indistinct color and a just perceptible "sweet" odor. At lower temperatures, it is almost incombustible. Prior to being phased out because to environmental and safety concerns, it was frequently used in fire extinguishers, as a predecessor to refrigerants, and as a cleaning agent. The central nervous system can be impacted as well as the liver and kidneys when exposed to high amounts of carbon tetrachloride, particularly its vapor. An extended exposure risk can be fatal.

Learn more about Carbon tetra chloride here:

https://brainly.com/question/14552669

#SPJ4

A) The proton chemically bonded to the chlorine is transferred to a water molecule and forms a chloride ion and a hydronium ion.

Proton include the H+ ion or the hydrogen atom's nucleus. Regardless of the isotope, each hydrogen atom has one proton, each helium atom has two, each lithium atom has three, and so on. A nose, throat, and eyes might get irritated when exposed to low amounts of chlorine. At greater concentrations, breathing chlorine gas may alter respiratory patterns, cause coughing, and harm the lungs. Chlorine exposure might cause serious additional symptoms. Chlorine exposure may be harmful to workers.

Learn more about proton here:

https://brainly.com/question/1252435

#SPJ4