Answers
Answer:
b d c a
Explanation:
Related Questions
If a device uses mains electricity at 230v and has a 13a fuse in the plug wht is the maximmum power it can safley use?
Answers
Answer:
2990W
Explanation:
Given parameters:
Voltage = 230V
Current = 13A
Unknown:
Maximum power it can safely use = ?
Solution:
To solve this problem;
Power = Current x Voltage
Power = 230 x 13 = 2990W
You fill a car with gasoline. The car now has...
Answers
Answer:
Fuel or a provided source of energy for combustion5. How fast does a 50 gram arrow need to travel to have 40 Joules of kinetic energy?
Answers
Answer: v = 40 m/5
Explanation:
40 J = 1/2 (105) v^2
1600 = v^2
v = 40 m/5
The velocity of the arrow weighing 50 g or 0.05 Kg to have a kinetic energy of 40 joules is 40 m/s.
What is kinetic energy?Kinetic energy is the energy generated in a body by virtue of the motion of the body. It is dependent on the mass and velocity of the body by the relation written below:
Ke = 1/2 mv²
Given the mass of the arrow = 50 g = 0. 05 kg
kinetic energy = 40 J
Thus velocity of the arrow = √(2 Ke / m)
= √(2 × 40 J / 0.05 Kg)
= 40 m/s .
Therefore, the velocity of the arrow will be 40 m/s
To find more on kinetic energy, refer here:
https://brainly.com/question/26590527
#SPJ2
Two bodies of mass m₁ & m₂ are moving with the same velocity 'v' K.E. will be greater for??
Answers
Answer:
the one with a higher mass
Explanation:
The body with more mass will have the greater kinetic energy of the two.
Kinetic energy is the energy due to the motion of body. It is mathematically expressed as:
K.E = [tex]\frac{1}{2}[/tex] m v²
m is the mass
v is the velocity
Since the velocity of the two bodies are the same, and mass is directly proportional to kinetic energy, the body with more mass will have a higher kinetic energy.
So between mass m1 and mass m2, the one with a greater mass will have a higher kinetic energy
A 1232 kg car moving north at 25.6 m/s collides with a 2028 kg car moving north at 17.5 m/s . They stick together. In what direction and at what speed do they move after the collision?
Answers
Answer:
I. Angle = 41.7° Northeast.
II. Vr = 7.08m/s
Explanation:
Let the two cars be denoted by A and B
Given the following data;
Mass of car A = 1232 Kg
Velocity of car A = 25.6 m/s
Mass of car B = 2028 Kg
Velocity of car B = 17.5m/s
First of all, we would solve for momentum;
Momentum = mass × velocity
Momentum, M1 = 1232 × 25.6
Momentum, M1 = 31539.2 Kgm/s
Momentum, M2 = 2028 × 17.5
Momentum, M2 = 35490 Kgm/s
Now, let's find the resultant momentum using the Pythagoras theorem;
R² = M1² + M2²
R² = 31539.2² + 35490²
R² = 994721136.6 + 1259540100
R² = 2254261237
Taking the square root of both sides, we have
Resultant momentum, R = 47479.06 Kgm/s
To find the direction;
Angle = tan¯¹(M1/M2)
Angle = tan¯¹(31539.2/35490)
Angle = tan¯¹(0.89)
Angle = 41.7° Northeast.
To find the speed;
R = (M1 + M2)Vr
47479.06 = (31539.2 + 35490)Vr
47479.06 = 67029.2Vr
Vr = 47479.06/67029.2
Vr = 7.08m/s
What kind of waves occur when the motion of the medium is parallel the the wave direction
Answers
Answer:
A longitudinal wave is a wave in which particles of the medium move in a direction parallel to the direction that the wave moves.
Explanation:
hope this helped
Describe the disadvantages and advantages of using this element for dating.
Answers
Answer:Each method of dating has constraints around its use and effectiveness. Not all methods are well-suited for each situation – and sometimes it is just not possible to use a particular dating method.
Examples of some of the constraints of using a dating method include:
the size of the sample
the type of sample
contamination of the sample
the type of associated geo-archaeological materials
the need to minimise destructive testing
the chronologies involved
Explanation:
A wooden block has a mass of 12 kg and is experiencing a force of 6 N. Calculate the acceleration that the wooden block will experience. Give your answer to ONE DECIMAL PLACE.
Answers
f = m•a
a = f/m
a = 6N / 12 kg
a = 0.5 m/s
therefore the block is experiencing an acceleration of 0.5 m/s.
Which best describes the particles in a solid? Multiple choice question. cross out A) close together and moving freely cross out B) far apart and moving freely cross out C) close together and vibrating in place cross out D) far apart and vibrating in place
Answers
Answer:
C) close together and vibrating in place cross out
Explanation:
Solid, liquid and gas are the three types of matter. In solid, the molecules are tightly packed together. The intermolecular forces is very strong and the particles do not move from one place to another. The particles are so closely packed that they move at their own place and vibrate forth and back. The motion of the movement of the particle and its force are the two factors that help in determining the state of matter.
What is the main idea of this text of "Phillis Wheatley"
Answers
Answer:
The main idea of the text is to tell you how Phillis wheatley grew up and what the person life was like
Which of the best describes a solution
Answers
1).A mixture having a uniform composition where the components can't be seen separately and all components are in the same state best describes a solution. In chemistry, a solution is a homogeneous mixture composed of two or more substances.
Which element is most likely to have an oxidation number of +1?
O A. 1
B. Ar
Ос. К
D. Be
Answers
Answer:
K
Explanation:
.........................
A smooth wooden block is placed on a smooth wooden tabletop. You find that you must exert a force of 22.0 N to keep this 7.00 kg block moving at a constant
velocity of 4.00 m/s. What is the gravitational force acting on the wooden block?
A.) 7.00 N
B.) 68.7 N
C.) 22.0 N
D.) 78.5 N
Answers
Answer:
B . 68.7 N
Explanation:
Given in the question that;
Force = 22 N
Mass = 7.0 kg
Velocity = 4.0 m/s
Gravitational force is the weight of wooden block , calculated as mass times acceleration due to gravity.
F= m* a
F= 7 * 9.81
F= 68.67 N
F= 68.7 N
A billiard ball collides with a second identical ball in an elastic head-on collision. What is the kinetic energy of the system after the collision compared with the kinetic energy before the collision
Answers
Answer:
Explanation:
From the question, we were made to understand that the collision between the two billiard balls was an elastic collision. Hence, an elastic collision is one in which the kinetic energy is conserved. Meaning the kinetic energy before the collision is still retained after the collision.
Kinetic energy before collision = kinetic energy after collision
1/2mv^2 = 1/2mv^2
There was no gain nor loss in energy
Answer:
unchanged
Explanation:
The coefficient of kinetic friction between an object and the surface upon which it is sliding is 0.46. The weight of the object is 90N. What is the force of friction?
Answers
Answer:
the friction force is 41.4N
Explanation:
from f=μ R, where R is the normal reaction. this is equal to the weight of the object
therefore, f = 0.46*90 = 41.4 N
A penny is dropped off the top of the Stratosphere from rest and falls freely with the
acceleration due to gravity (9.81 m/s2). After 5 seconds, how far has it fallen (Ax)?
Answers
Answer:
S = 122.5m
Explanation:
Given the following data;
Acceleration due to gravity = 9.8m/s²
Time, t = 5 seconds
Since it's a free fall, initial velocity, u = 0
To find the displacement, we would use the second equation of motion given by the formula;
[tex] S = ut + \frac {1}{2}at^{2}[/tex]
Where;
S represents the displacement or height measured in meters. u represents the initial velocity measured in meters per seconds. t represents the time measured in seconds. a represents acceleration measured in meters per seconds square.Substituting into the equation, we have;
[tex] S = 0*5 + \frac {1}{2}*(9.8)*5^{2}[/tex]
[tex] S = 0 + 4.9*25[/tex]
S = 122.5m.
helpp pls .. Which statement is true about the process shown?
Answers
Answer:
I think its A
Explanation:
A 10 kilogram radio controlled airplane at 1000 meters has 100,000
joules of potential energy, and moving at 10 meters per second it has 500
joules of kinetic energy. How much mechanical energy does the radio
controlled airplane have? Include units in your answer but no decimal
point or digits to the right of the decimal point. *
Answers
Answer:
The mechanical energy of the airplane is 100,500 joules
Explanation:
The given parameters are;
The mass of the airplane = 10 kg
The height at which the airplane is located = 1000 meters
The potential energy of the airplane, P.E. = 100,000 joules
The speed of the airplane = 10 m/s
The kinetic energy of the airplane, K.E. = 500 joules
The Mechanical Energy, M.E. = The Potential Energy, P.E. + The Kinetic Energy, K.E.
M.E. = P.E. + K.E.
∴ M.E. = 100,000 joules + 500 joules = 100,500 joules
The mechanical energy of the airplane, M.E. = 100,500 joules.
The amount of friction depends on the weight of the objects pressing together.
Answers
Answer:
The amount of friction depends on the force pushing the surfaces together. If this force increases, the hills and valleys of the surfaces can come into closer contact. The close contact increases the friction between the surfaces. Objects that weigh less exert less downward force than objects that weigh more.
Explanation:
Friction depends partly on the smoothness of the contacting surfaces, a greater force being needed to move two surfaces past one another if they are rough than if they are smooth.
change 200km/hr into m/sec
Answers
Answer:
200km/hr=55.55m/sec
Explanation:
200km/1hr×1000m/1km×1hr/3600sec=200,000/36000
This type of bike tire is thinner, lighter, more expensive, and punctures easily.
Answers
Saeed moves 50 m east then 65 m south to reach the garden. What is the displacement of Saeed?
Answers
Answer:
82.01m
Explanation:
Using the formula:
R^2=A^2+B^2
R= √ A^2+B^2
Where R= displacement
A=50m
B=65m
R= √ 50^2+65^2
R= √ 2500+4225
R= √ 6725
R=82.01m
Question 25
2.5 pts
Which of the following statements describes a difference
between a chemical change and a physical change in a
substance?
Tim
Attei
231
o The result of a chemical change is a different
composition; in a physical change, the composition
remains the same.
o A physical change occurs only in elements: a
chemical change occurs only in compounds.
O A chemical change occurs only in elements; a
physical change occurs only in compounds.
The result of a physical change is a different
Answers
Answer:
o The result of a chemical change is a different composition; in a physical change, the composition remains the same.
Explanation:
In a chemical change, new kinds of matter are produced although the atoms are the same.
For physical changes, no new kinds of matter formed. Only the state of substances changes.
Most chemical changes are usually irreversible Physical changes are reversible in most parts. Changes in state and form are salient characteristics of physical changes. When new products are formed from the reactants, it is an indicator of a chemical change.Daniel steps on the gas pedal of his car, and the engine increases its performance from zero to
2700 rpms (rotations per minute). What are the frequency and period?
(Hint: frequency is cycles per second.]
Answers
Answer
The frequency and the period are 45 cycles/second and 0.023 seconds
Explanation:
The frequency of the engine is given by :
[tex]f=\dfrac{rpm}{60}[/tex]
We have, the engine increases its performance from zero to 2700 rpms.
Frequency,
[tex]f=\dfrac{2700}{60}\ \text{cycles per second}\\\\f=45\ \text{cycles per second}[/tex]
The time period of the engine is given by :
T = f/f
So,
[tex]T=\dfrac{1}{45}\ s\\\\T=0.023\ s[/tex]
Hence, the required frequency and the period are 45 cycles/second and 0.023 seconds respectively.
Under what condition will kinetic friction slow a sliding object?
Answers
Explanation: Slowing Down (or Stopping) occurs when the force of kinetic friction is greater than that of the external force. This also follows Newton's first law of motion as there exists a net force on the object.
Increasing the number of loops in a electromagnet or solenoid will cause it to be stronger
True or false?
Answers
The electromagnet will become stronger if we add more coils because there are more field lines in a loop then there is in a straight piece of wire. In a solenoid there are a lot of loops and they are concentrated in the middle, as more loops are added the field lines get larger, therefore making the electromagnet stronger.
what would the force be on a 14.5 kg object that was accelerating 2.7 m/s^2
Answers
Answer:
39.15 NExplanation:
The force acting on an object given it's mass and acceleration can be found by using the formula
force = mass × acceleration
From the question we have
force = 14.5 × 2.7
We have the final answer as
39.15 NHope this helps you
A train travels 200km/hr. how much distance will the train be from the station in 2.5 hours?
Answers
Answer:
500km
Explanation:
Given parameters:
Speed = 200km/hr
Time taken = 2.5hrs
Unknown:
Distance = ?
Solution:
To solve this problem, we use the speed, time and distance equation.
Therefore;
Distance = Speed x time
So;
Distance = 200 x 2.5 = 500km
Which one!!!!!!!!!!!!
Answers
Answer:
3N to the right
Explanation:
Which three statements about gravity and the formation of the solar system
are true?
A. Gravity pulled most of the matter into the center of the solar
system.
B. Gravity caused the planets and Sun to have spherical shapes.
O C. Gravity held the pieces of forming planets together.
D. Gravity evenly distributed matter throughout the solar system.
Answers
Answer:
it's answer is B
A planet is round because of gravity. A planet's gravity pulls equally from all sides. Gravity pulls from the centre to the edges like the spokes of a bicycle wheel. This makes the overall shape of a planet a sphere, which is a three -dimensional circle
Hope it helps you