I need help with this ASAP! I would really appreciate it.

For the equation 5^n = 5^11 × 5³ the value of n using the exponents rule is obtained as n = 14.

What is an exponent?

The way of representing huge numbers in terms of powers is known as an exponent. Exponent, then, is the number of times a number has been multiplied by itself.

The given equation is 5^n = 5^11 × 5³

Since, the base of the exponents is same, so apply the operations on the powers of the base.

The value of n can be found by following the exponent rule.

The exponent rule is - a^(b) × a^(c) = a^(b + c)

Write the equation according to the rule -

5^n = 5^(11 + 3)

Use the arithmetic operation of addition -

5^n = 5^(14)

n = 14

Therefore, the value of n is obtained as 14.

To learn more about exponent from the given link

https://brainly.com/question/11975096

#SPJ1

Answer:

13

Step-by-step explanation:

Assuming the horizontal lines are parallel, we will see that the measure of angle 4 is m∠4 = 39°

First, we assume that the two horizontal lines are parallel, that will mean that the measures of angle 4 and 7 are equal, beacause both of them are on the same quadrant.

Also, notice that angle 7 and 141° should add up to 180° (a plane angle) thus, we will get:

m∠7 + 141° = 180°

m∠7 = 180° - 141°

m∠7 = 39°

The measure of angle 4 is also that, so we conclude that:

m∠4 = 39°

Learn more about angles at:

https://brainly.com/question/25716982

#SPJ1

Answer:

39

Step-by-step explanation:

3(2x + 3) = 6x + 9 = 6(5) + 9 = 39

[tex]3(2x+3)[/tex] when x is 5

Substitute for x with the given value:

[tex]3(2(5)+3)[/tex]

[tex]3(10+3)[/tex]

[tex]3(13)[/tex]

[tex]=\fbox{39}[/tex]

option b is correct - covariance

The correlation coefficient (r ) is a numerical measure that measures the strength and direction of a linear relationship between two quantitative variables.

Covariance

A numerical measure of linear association between two variables.

Covariance is a measure of how changes in one variable are associated with changes in a second variable. Specifically, covariance measures the degree to which two variables are linearly associated. However, it is also often used informally as a general measure of how monotonically related two variables are.  It is similar to variance, but where variance tells you how a single variable varies, covariance tells you how two variables vary together.

Learn more about covariance here :-

https://brainly.com/question/14300312

#SPJ4

The greatest two-digit prime number with the property that the product of its digits is also a prime number is 37, since 3 x 7 = 21.

The greatest two-digit prime number with the property that the product of its digits is also a prime number is 37, since 3 x 7 = 21. Prime numbers are those numbers greater than 1 that are divisible only by 1 and itself. Two-digit prime numbers are those number between 10 and 99. The prime numbers between 10 and 99 are 11, 13, 17, 19, 23, 29, 31, 37, 41, 43, 47, 53, 59, 61, 67, 71, 73, 79, 83, 89, and 97. The product of the digits of 37 is 3 x 7 = 21, which is also a prime number. Therefore, the greatest two-digit prime number with the property that the product of its digits is also a prime number is 37.

Learn more about prime number here

https://brainly.com/question/9315685

#SPJ4

The value that the probability of correctly classifying a type an insect equals the probability of correctly classifying a type b insect is 4.5 millimeters.

To find the value that the probability of correctly classifying a type A insect equals the probability of correctly classifying a type B insect, we need to find the point where the probability density functions of the two types of insects intersect.

For type A insects, the probability density function is given as -

f(x) = [tex](1/2)e^{-{x-3}^{2/2}}[/tex]

For type B insects, the probability density function is given as-

f(x) = [tex](1/4)e^{-{x-5}^{2/2}}[/tex]

We can set these two probability density functions equal to each other and solve for x as follows -

[tex](1/2)e^{-{x-3}^{2/2}}[/tex] =  [tex](1/4)e^{-{x-5}^{2/2}}[/tex]

Solving for x, we get:

x = 4.5

So the value that the probability of correctly classifying a type A insect equals the probability of correctly classifying a type B insect and is 4.5 millimeters. This means that if the length of the insect is 4.5 millimeters or less, it will be classified as type A, and if it is greater than 4.5 millimeters, it will be classified as type B.

Read more about Probability:

brainly.com/question/24756209

#SPJ4

The model with the highest revenue is model D

From the question, we have the following parameters that can be used in our computation:

                                                   Model A Model B Model C Model D Model E

Time to manufacture (mins) (t)         15             18         13              20     17

% Of monitors sold  (s)                  75%          73%      84%        95%   81%

Cost per monitor (c)                     $175         $188     $145     $198     $170

The factor works 9 hours for 7 days

So, the total duration per unit time is

D = 9 hours * 7/t

D = 63/t

Convert t to hours

D = 63 * 60/t

D = 3780/t

The total revenue is then calculated as

R = c * D * s

So, we have

Model A = 175 * 3780/15 * 75% = 33075

Model B = 188 * 3780/18 * 73% = 28820

Model C = 145 * 3780/13 * 84% = 35444

Model D = 198 * 3780/20 * 95% = 35551

Model E = 170 * 3780/17 * 81% = 30569

The highest value above is 35551

Hence, the model is model D

Read more about expression at

https://brainly.com/question/15775046

#SPJ1

Complete question

Model A Model B Model C Model D Model E

Time to manufacture 15 minutes 18 minutes 13 minutes 20 minutes 17 minutes

% Of monitors sold per total products 75% 73% 84% 95% 81%

Cost per monitor $175 $188 $145 $198 $170

A company manufactures computer monitors. Among the various models are top

products, which bring high revenue.

Assuming the manufacturing lines are running for 9 hours a day for 7 days a week,

which model brings in the highest revenue?

Step-by-step explanation:

First add you two numbers in parethese and then subtract thhat and dit =0

The rate of change for the linear function is 2.

The initial value for the linear function is 3.

The equation of a line is given by:

y = mx + c

where m is the slope of the line and c is the y-intercept.

Example:

The slope of the line y = 2x + 3 is 2.

The slope of a line that passes through (1, 2) and (2, 3) is 1.

We have,

The points on the coordinate plane:

(0, 3) and (2, 7)

Now,

The equation of the line.

y = mx + c

Slope = m

m = (7 - 3) / (2 - 0)

m = 4/2

m = 2

Now,

(0, 3) = (x, y)

3 = 2 x 0 + c

3 = 0 + c

c = 3

The y-intercept is 3.

Thus,

The rate of change is 2.

The initial value is 3.

Learn more about equation of a line here:

https://brainly.com/question/23087740

#SPJ1

The type of transformation and scale factor as required are;

16) Rotation

17) Reflection

18) Dilation

19) n = 5

20)P = r = 4

There are different types of transformation as follows;

1) Translation: This type of translation is defined as moving the object in space by keeping its size, shape or orientation constant. In a translation, each point of the shape must be moved in the same direction and for the same distance

2) Dilation: This type of translation expands or contracts the object by keeping its orientation or shape the same. This is also known as resizing.

3) Rotation: This type of transformation has an object about a fixed point without changing its size or shape.

4) Reflection: This type of translation is called reflection because it flips the object across a line by keeping its shape or size constant.

16) This transformation is rotation based on the definitions above.

17) This type of transformation is a reflection as it is like the image was flipped across a line more like a mirror image.

18) This called dilation as the scale factor was adjusted to produce the new image.

19) Scale Factor = 6/3 = 2

Thus;

n = 10/2 = 5

20) Scale factor = 12/9 = 4/3

Thus;

P = r = 3 * 4/3

= 4

Read more about types of transformation at; https://brainly.com/question/4289712

#SPJ1

The measure of the angle m∠HEF = 64°, for the diagonals of rectangular room.

The given data:

As, GE is the straight line.

Thus,

m∠EHF = 180 - 128 (sum of all angles of line is 180, linear pair)

            = 52°

Now,

m∠HEF = 180 - 52 / 2 (isosceles triangle)

m∠HEF = 64°

Thus, the measure of the angle m∠HEF = 64°, for the diagonals of rectangular room.

To know more about the linear pair, here

https://brainly.com/question/18944511

#SPJ1

The diagram for the question is attached.

The maximized value of the objective function is 3

From the question, we have the following parameters that can be used in our computation:

C = x + y

Subject to

y >= 0

x >= 0

4x + 2y <= 8

2x - y <= 0

When the graphs of these inequalities are plotted (see attachment), we have the following feasible regions

(x, y) = (0, 0) and (1, 2)

This means that

C = 0 + 0 = 0

C = 1 + 2 = 3

3 is greater than 0

Hence, the maximized value is 3

Read more about objective function at

https://brainly.com/question/14309521

#SPJ1

Histogram II shows the distribution of the students’ balance-scale readings, so the correct answer is option (b).

It is stated that most students are very good at reading the scale. Thus, most of the students will read the scale accurately around the actual weight (i.e., around 1.6 ounces), and very few will read far below or far above the accurate weight of 1.6 ounces.

As a large portion of the understudy score tremendous and ought to have rough equivalent aptitude; in this manner, the histogram ought to be around symmetrical.

Therefore, histogram II (symmetrical distribution) shows the perfect distribution of the students' balance-scale readings.

To read more about histogram:

https://brainly.com/question/16819077

#SPJ4

The complete question is:

A chemistry class has learned how to read a sensitive high-caliber balance scale (this is not a digital scale). Since most students are very good at reading the scale, the instructor decides it’s time to test their skills. The instructor asks each student to weigh the same 1. 6 ounce bag of Peanut M&Ms, and then records each student’s reading of the balance scale. Which histogram shows the distribution of the students’ balance-scale readings?

(a) Histogram I

(b) Histogram II

(c) Histogram III

(d) Histogram IV

The money in Shane's account after five years will be $4900.

The formula for simple interest is -

S.I. = PRT/100, where P is principal, R is rate of interest, T is time and SI is simple interest. Interest is calculated semi-annually then t will be 5×2 years.

Keep the values in formula -

S.I. = 3500 × 4 × 5 × 2/100

Performing multiplication in numerator on Right Hand Side of the equation

S.I. = 1,40,000/100

Cancelling common zero on Right Hand Side of the equation

S.I. = $1400

Total amount = Principal + Interest

Keep the values in formula -

Total amount = 3500 + 1400

Performing addition

Total amount = $4900

The total money in account will be $4900.

Learn more about simple interest -

https://brainly.com/question/25793394

#SPJ4

Answer:

25 . 3 %

Step-by-step explanation:

it has the circuits of the brain

The two coordinate values are simply swapped in the reflection over the line y=x: A'' = (4, 1) (4, 1)

The x-coordinate and y-coordinate of a point change positions when it is reflected across the line y = x.

The x- and y-coordinates shift positions and are negated when a point is mirrored across the line y = -x.

In light of this, the reflection of the point (x, y) across the line y = x is (y, x).

The first reflection's location across the vertical line x=-3 ensures that the y-coordinate is constant.

The point (-3, 4) on the line of reflection will become the halfway point between A and A' thanks to the x-coordinate of A':

(-3, 4) = (A +A')/2

2(-3, 4) (-3, 4)

-A = A' = (-6-(-7), 8 -4) = (1, 4) (1, 4)

The two coordinate values are simply swapped in the reflection over the line y=x: A'' = (4, 1) (4, 1)

To learn more about transformation refer

https://brainly.com/question/6942440

#SPJ1

The distance of the translation resulting from the composition of the two reflections Rk and Rh is equal to |1 + 2x|

To determine the distance of the translation resulting from the composition of two reflections Rk and Rh, we can calculate the difference in x-coordinates of the pre-image and image points.

Reflection Rk reflects points over the line x = 2,

So the x-coordinate of a point and its reflection would have a difference of 2 - x, where x is the x-coordinate of the original point.

Reflection Rh reflects points over the line x = -3,

So the x-coordinate of a point and its reflection would have a difference of -3 - x

When we compose the two reflections

The x-coordinate of a point and its image will have a difference of (2 - x) - (-3 - x)

Evaluate

Distance = 5

Hence, the distance is 5 units

Read more about transformation at

https://brainly.com/question/27224272

#SPJ1

Approximately 95.45% of the area under the standard normal distribution lies within two standard deviations of the mean.

The standard normal distribution is a normal distribution with a mean of 0 and a standard deviation of 1. This means that 68.27% of the area under the standard normal distribution lies within 1 standard deviation of the mean, and 95.45% of the area under the standard normal distribution lies within 2 standard deviations of the mean.

This is because the standard deviation is a measure of the spread of the data; the larger the standard deviation, the more spread out the data is.

Learn more about Distribution: https://brainly.com/question/27701525

#SPJ4

The kite is 84.8 feet off the ground.

The angle produced whenever an object if viewed above the horizontal plane is termed the angle of elevation.

To determine how high off the ground is the kite, we have;

let the altitude of the kite from the man's head be represented by s,

Sin θ = opposite/ hypotenuse

Sin 52 = s/ 100

s = Sin 52*100

  = 0.7880*100

s = 78.8 feet

The height of the kite off the ground = 78.8 + 6

                                    = 84.8

The height of the kite off the ground is 84.8 feet.

Learn more about the angle of elevation at

#SPJ1

Answer:

378 Euros

Step-by-step explanation:

A good way to estimate is to round to the nearest whole number or 10th and then multiply:

8.70 --> 9.00 (since 7 > 5 you round up to the nearest whole number, in this case 9)

then you multiply. A good way to do this in your head is doing:

split 42 into 2 numbers:
40, 2

then multiply by nine:

9 * 4 = 36 (9 * 40 = 360) added a zero since we multiplied by 40, its just easier to multiply by smaller numbers

9 * 2 = 18

then add the two numbers together:

360 + 18 = 378 Euros

The actual answer with a calculator is 365.4 Euros, so for an estimation its fairly close.

Another way you could solve it is to just round 8.70 --> 10 (rounding to the nearest 10th)

then:

10 * 42 = 420 (nice)

I don't recommend it since its way too off from the original value, but could be good for quick estimations.

hope this helped you :)

Answer:

Step-by-step explanation:

im am sorry but i dont understand so i cant answer this question see you later!

Sixty three is the product of nine and a number which is seven

Multiplying in math is the same as adding equal groups.

The number of items in the group grows as we multiply. Parts of a multiplication problem include the product, the two components, and the answer.

In the multiplication problem involving 63 as the product of 9 and another number

let the number be x

9 * x = 63

9x = 63

isolating x by dividing both sides by 9

9x / 9 = 63 / 9

x = 7

the number is 7

Learn more on multiplication at:

https://brainly.com/question/10873737

#SPJ1

The value of x is 5.5

The polygon is a 2D geometry that has a finite number of sides. And all the sides of the polygon are straight lines connected to each other side by side.

Given;

The two polygons are similar

So,

x-1/6=16/21

x/6-1/6=16/21

x/6=16/21+1/6

x=5.5

y+1/32=21/24

y/32+1/32=7/8

y=3

Therefore, the value of x in polygon will be 5.5

More about the polygon link is given below.

brainly.com/question/17756657

#SPJ1

The minimum value of the third side is 9 cm, and The maximum value of the third side is 6.7 cm.

The minimum value of the third side is when the triangle is a degenerate triangle, meaning that the third side is a line segment joining the two endpoints of the first two sides, which is equal to 3 cm + 6 cm = 9 cm.

The maximum value of the third side is when the triangle is a right triangle, and the two sides are the legs. According to the Pythagorean theorem, the third side (the hypotenuse) should be equal to the square root of 3² + 6² = 9 + 36 = 45, which is equal to 6.7 cm.

To know more about right triangle, here

https://brainly.com/question/12518498

#SPJ4

--The given question is incorrect; the correct question is

"The length of two sides of a triangle are 3cm and 6cm. What could be the minimum and maximum value of its third side?"--

Each notebook is $5 and each thumb drive is $12.

To Locate:

The price per notebook and per flash drive

Explain x and y:

Let's say a notebook costs x dollars.

I'll pay whatever a thumb drive costs.

Form equations:

4x + y = 32 ------------------------ [ 1 ]

3x + 2y = 39 ---------------------- [ 2 ]

Equation [ 1 ] x 2:

8x + 2y = 64 ---------------------- [ 3 ]

[ 3 ] - [ 2 ] :

5x = 25

x = 5

Substitute x = 5 into [ 1 ]:

4(5) + y = 32

20 + y = 32

y = 32 - 20

y = 12

Find the cost of each notebook and each thumb drive:

notebook = x

notebook = $5

thumb-drive = y

thumb-drive = $12

Each notebook is $5 and each thumb drive is $12.

Know more about cost:

https://brainly.com/question/25109150

#SPJ4

Answer:

Step-by-step explanation:So make sure you learn this in fifth grade so basically whatever your line go to let's say if it lands on 79 I mean 70 and that's like I mean 150 it depends on what you're using

Answer:

Step-by-step explanation:√81 = √x²

9 = square root cancel square = x

9=

x=

The given relations are:

1) It is a function.

2) not a function.

3)it is a function.

4) not a function.

A function is a relation that maps inputs into outputs, such that each output needs to be mapped into a single input.

1) For example, the first relation each input (left row) is mapped into a single output, thus, it is a function.

2) Here theinput 9 is mapped into two different outputs, then it is not a function.

3) The notation used here is (input, output), so we can see that no input is repeated,so it is a functon.

4) The input 9 is mapped into 3 different outputs, then it is not a function.

Learn more about functions at:

https://brainly.com/question/2328150

#SPJ1

Confidence interval will be between $831.57 and $1040.67.

To find a confidence interval for the population standard deviation, we can use the formula:

(sample standard deviation / square root of sample size) x t-multiplier

where t-multiplier is based on the degree of confidence and the sample size.

For a 98% confidence interval and a sample size of 9, the t-multiplier is 2.821 (from a t-table or a calculator with a t-distribution function).

So the confidence interval for the population standard deviation is:

(886 / sqrt(9)) x 2.821 = (886 / 3) x 2.821 = 295.33 x 2.821

                                                                  = 831.57 to 1040.67

Therefore, we can be 98% confident that the population standard deviation of the annual earnings of college students falls between $831.57 and $1040.67.

To learn more about Confidence interval here:

https://brainly.com/question/24131141

#SPJ4