I need answer for a. (ii) pls​

Answer:

Elements fill the lowest energy subshells first(Aufbau's rule), and the 4s subshell is lower energy than the 3d, making the labeling deceiving. In some rare situations, the electrons would rather have Hund's rule be respected more, having all electrons facing one way with no doubled up because it is more stable(these are pretty rare and usually deal with transition metals like copper).

Hope this helps!

Explanation:

As it has less energy than the 3d orbital, the 4s orbital fills next. Following the filling of the electrons, 4s has more energy than 3d. Therefore, the two electrons in the 4s are at a higher energy than they could be in the 3d since it has a vacancy. As a result, electrons transition from a higher to a lower energy orbital.

The elementary electric charge of the electron is a negative one, making it a subatomic particle. Due to their lack of components or substructure, electrons, which are part of the lepton particle family's first generation, are typically regarded to be elementary particles.

Since 4s electrons are bound by the nucleus farther away and more loosely than 3d electrons, 4s electrons are eliminated first rather than 3d electrons.

The 4s orbital should always be filled before the 3d orbitals, according to the Aufbau principle, although this isn't the case for the majority of elements. After Sc, electrons actually enter the 3d orbitals first because they have a lower energy than the 4s orbital.

Thus, electrons transition from a higher to a lower energy orbital.

To learn more about an electron, follow the link;

https://brainly.com/question/1255220

#SPJ2

Answer:

a) sodium oxide

b) potassium peroxide

c) Hydrogen chloride

d) form ammonia

e) Calcium nitride

Answer:

Dry ice is the solid form of carbon dioxide (CO 2), a molecule consisting of a single carbon atom bonded to two oxygen atoms. Dry ice is colorless, odorless, and non-flammable, and can lower the pH of a solution when dissolved in water, forming carbonic acid (H 2 CO 3).

Explanation: i asked my teacher and this was her response.

Answer: I do believe it shows variables.

Explanation:

Answer:

Since all of them are aqueous solutions, the solvent in each solution is H2O. Based on the Raoult's Law, we only have to determine which solution contains the highest mole fraction of the solvent, H2O. The solution that will have the lowest vapor pressure is a. 0.20 m Na2SO4.

Explanation:

plz give brainliest

Answer: Gases, Liquids, and Solids

Gases

Explanation:

Behavior

gas liquid solid

assumes the shape and volume of its container

particles can move past one another assumes the shape of the part of the container which it occupies

particles can move/slide past one another retains a fixed volume and shape

rigid - particles locked into place

compressible

lots of free space between particles not easily compressible

little free space between particles not easily compressible

little free space between particles

flows easily

particles can move past one another flows easily

particles can move/slide past one another does not flow easily

rigid - particles cannot move/slide past one another

a hypothesis is a prediction based on a theory. If the Hypothesis comes true the theory is more accepted.

A scientific theory differs from a scientific fact or scientific law in that a theory explains "why" or "how": a fact is a simple, basic observation, whereas a law is a statement (often a mathematical equation) about a relationship between facts.

Answer:

cement air water sand and gravel

Explanation:

Answer:

Explanation:

The principal ingredients that make up the concrete mix are: cement, fine aggregate, coarse aggregate, water, chemical admixtures, and mineral admixtures.

Answer:

Melting point, boiling point, state of matter at room temperature, heat of vaporization, flammability and reactivity

Explanation:

Answer:

The periodic table will say it underneath the symbol.

Explanation:

I don't know how else to describe it but I hope this helps. :)

Answer:

1031.084g

Explanation:

n=m/M

m=n(M)

m = (3.4mol)(303.26g/mol)

1031.084g

Hope that helps

Answer:

1031.08

Explanation:

You start with 3.4 moles and you know that 6.022 x 10 ^ 23 = 1 mole( Avogadro's Number), so you just multiply those 2 numbers and the moles will cancel leaving you with grams of Lead Sulfate.

i have no idea what you said but for the sake of god its true

Answer:

It's b

Explanation:

I had the same exact question

Answer: All options (I, II, III, IV, V)

Explanation: The answer is all options because they never reach equilibrium or intersect at a region as the both decrease at the same rate.

Answer: Picture shows the correct one

Explanation:

Answer:

One possible reason why many studies on antioxidant supplements do not show a health benefit is because antioxidants tend to work best in combination with other nutrients, plant chemicals, and even other antioxidants.

Explanation:

The moles of silver nitrate required to form 0.854 mol silver ion has been 0.854 mol.

The balanced chemical equation for the dissolution of silver nitrate has been:

[tex]\rm AgNO_3\;\rightarrow\;Ag^+\;+\;NO_3^-[/tex]

The aqueous solution of silver nitrate has been dissociated into the constituent silver and nitrate ions.

In a balanced chemical equation, the coefficient has been equivalent to the moles of each reactant forming the moles of product.

From, the balanced equation,

[tex]\rm 1\;mol\;AgNO_3=1\;mol\;Ag[/tex]

The given moles of Silver has been 0.854 mol. Thus, the moles of silver nitrate required has been given as:

[tex]\rm 1\;mol\;Ag^+=1\;mol\;AgNO_3\\0.854\;mol\;Ag^+=0.854\;\times\;1\;mol\;AgNO_3\\0.854\;mol\;Ag^+=0.854\;mol\;AgNO_3[/tex]

The moles of silver nitrate required to form 0.854 mol silver ion has been 0.854 mol.

For more information about the moles produced, refer to the link:

https://brainly.com/question/10606802

Answer:

monkey

Explanation:

cause that's what u r

Answer:

the branch of science that deals with the identification of the substances of which matter is composed; the investigation of their properties and the ways in which they interact, combine, and change; and the use of these processes to form new substances.

Explanation:

Hope this helps!

Answer: P4S7

Explanation:

Answer:

D

Explanation:

a,b, and c wouldn't cause the reaction that Jermey expirenced

The compound that contains both sigma and pi bonds has been [tex]\rm \bold{H_2CO}[/tex]. Thus, option B is correct.

The compounds have been resulted by the sharing of the valence electrons between atoms, for the completion of octet of each elements.

The bonds can be saturated with the presence of only sigma bond. The unsaturated bonds has presence of pi bonds as well. The bond with one pi and one sigma has been a double bond, while 1 sigma and 2 pi has been a triple bond.

The bonds present in the following structures has been:

[tex]\rm HCCl_3=4\;\sigma\;bonds\\H_2CO=2\;\sigma,\;1\;\pi\;bond\\H_2S=2\;\sigma\;bonds\\HBr\;=1\;\sigma\;bond[/tex]

The compound with the presence of both sigma and pi bonds has been [tex]\rm \bold{H_2CO}[/tex]. Thus, option B is correct.

For more information about the sigma and pi bonds, refer to the link:

https://brainly.com/question/14018074

Answer:

A single covalent bond

Explanation:

A single covalent bond is when only one pair of electrons is shared between atoms. A sigma bond is the strongest type of covalent bond, in which the atomic orbitals directly overlap between the nuclei of two atoms.

Answer:

Single covalent bond.

Explanation:

Single covalent bond is the type of bond in which only one pair of electrons is shared between atoms.

[tex]\rule[225]{225}{2}[/tex]

Hope this helped!

Answer:

Its actually true

Explanation:

Your Welcome Canada,

OH YEAH!!!!!!

Answer:

The correct answer is "True".

Explanation:

I hope this helps!

Answer:

Because they are electrical conductors because their delocalized electrons carry electrical charge through the metal. they are good conductors of thermal energy because their delocalized electrons transfer energy.

I hope it helps.

Answer:

i dont know

Explanation:

trolololololololololololololololol

Answer:

Higher pitched sounds produce waves which are closer together than for lower pitched sounds. (Think of the slinky - if you produce waves rapidly they will travel quite close to each other, thus demonstrating a higher pitched sound.)

The pitch of a note will depend on a number of factors. One of these is the size of the vibrating object. On a glockenspiel or xylophone the high notes are made by the smaller bars. A smaller triangle or cymbal will make a relatively higher pitch note. On a stringed instrument such as a guitar or violin a thinner string will generally make a higher note, but also shortening the string by stopping it with the finger will produce a similar effect. On a set of pan pipes or a church organ it is the shorter pipes which make the higher notes when the air inside them vibrates.

Another factor which produces higher pitched notes is the tension within the vibrating object. A guitar string can be tuned to a higher pitch by adjusting the string tensioner. An elastic band can be stretched tighter and a drum skin can be tensioned to increase the pitch of the sound it produces.

Explanation:

1. subatomic particles. 

2.proton, electron and neutron

3.The atomic mass of an element is actually the sum of the MASSES of protons and neutrons in AN atom of that element

4.An element's atomic number is equal to the number of protons in the nuclei of any of its atoms

5. Number of Protons = Atomic Number

Number of Electrons = Number of Protons = Atomic Number

Number of Neutrons = Mass Number - Atomic Number

For krypton:

Number of Protons = Atomic Number = 36

Number of Electrons = Number of Protons = Atomic Number = 36

Number of Neutrons = Mass Number - Atomic Number = 84 - 36 = 48

6. electron, lightest stable subatomic particle known. It carries a negative charge of 1.602176634 × 10−19 coulomb, which is considered the basic unit of electric charge. The rest mass of the electron is 9.1093837015 × 10−31 kg

7.The center of the atom is called a nucleus

8. Negatively charged particles are found in multiple layers outside the nucleus of the atom. These particles are called electrons, and they orbit in various energy levels around the atom's nucleus.

9. A charged particle is also called an ion

Answer:

atomic weight or number of neutrons.

Explanation:

An isotope: is one of two or more forms of the same chemical element.

Different isotopes of an element have the same number of protons in the nucleus, giving them the same atomic number.

A different number of neutrons giving each elemental isotope a different atomic weight.