1) pH of the solution is 2.50pH; 2) 3.162 x 10⁻³ M ; 3) [ CH₃COO⁻ ] = [H⁺] = 1.33 x 10⁻³M ; 4) concentration of CH₃COOH at equilibrium will be:(1.0 - 1.33 x 10⁻³) M = 0.9987 M ; 5) Ka= 1.77 x 10⁻⁵ 6) The % error is 1.14%. Some of the possible sources of this error include systematic errors, errors in measurement, human errors, etc.
I. Determination of Ka of acetic acid A. Measure out 10.0 mL of 1.0 M acetic acid (CH3COOH) into a beaker.1. Measured pH of the solution is 2.50pH
2. Calculate the H₃O⁺ at equilibrium for this solution. (include units) H3O+eq The pH of the solution is pH = 2.50[H3O⁺] = 10⁻².⁵ = 3.162 x 10⁻³M [H3O⁺] = 3.162 x 10⁻³ M
3. Calculate the CH₃COO- at equilibrium for this solution. (include units) CH₃COO⁻ eqThe equation for the ionization of acetic acid is:CH₃COOH (aq) ⇋ H⁺ (aq) + CH₃COO⁻ (aq)Let the concentration of [ CH₃COO⁻ ] be x.The initial concentration of acetic acid is 1.0 M, so the initial concentration of H⁺ is also 1.0 M.As the reaction is in equilibrium, the concentration of CH₃COOH will be (1 - x) M.As the equation states, the molar concentration of H⁺ ion is equal to the molar concentration of CH₃COO⁻ ion. Therefore:[H⁺] = xM and [CH₃COO⁻] = xM
For the reaction CH₃COOH (aq) ⇋ H⁺ (aq) + CH₃COO⁻ (aq)K = [H⁺] [CH₃COO⁻ ]/ [CH₃COOH]Therefore, K = x² / (1 - x)1.76 x 10⁻⁵ = x² / (1 - x)x² = 1.76 x 10⁻⁵ (1 - x)x² = 1.76 x 10⁻⁵ - 1.76 x 10⁻⁵x = [ CH₃COO⁻ ] = [H⁺] = 1.33 x 10⁻³M
4. CH₃COOH eq The initial concentration of acetic acid is 1.0 M.As the concentration of CH₃COO⁻ at equilibrium is 1.33 x 10⁻³ M, the concentration of CH₃COOH at equilibrium will be:(1.0 - 1.33 x 10⁻³) M = 0.9987 M
5. The equation for the ionization of acetic acid is: CH₃COOH (aq) ⇋ H⁺ (aq) + CH₃COO⁻ (aq)K = [H⁺][ CH₃COO⁻ ]/ [CH₃COOH]Substituting the values: K = (1.33 x 10⁻³)² / (0.9987)K = 1.77 x 10⁻⁵.
6. The reported value for the acid dissociation constant of acetic acid is 1.75 x 10⁻⁵. The % error is calculated using:% error = [(experimental value - accepted value) / accepted value] x 100% error = [(1.77 x 10⁻⁵ - 1.75 x 10⁻⁵) / 1.75 x 10⁻⁵] x 100% error = 1.14%. The % error is 1.14%. Some of the possible sources of this error include systematic errors, errors in measurement, human errors, etc.
To know more about pH, refer
https://brainly.com/question/12609985
#SPJ11
how many moles of h2o contain 4.02 × 1022 atoms of hydrogen?
0.0334 moles of H2O contain 4.02 × 1022 atoms of hydrogen.
To find out the number of moles of H2O that contain 4.02 × 1022 atoms of hydrogen, we will use Avogadro's constant and stoichiometry.
Avogadro's constant is a measure of the number of particles present in a mole of a substance. It has a value of 6.022 × 1023 particles/mol.
The stoichiometric ratio of hydrogen to water is 2:1. This means that 2 moles of hydrogen react with 1 mole of water. Water's molecular composition can be represented by the formula H2O.
Therefore, the number of moles of hydrogen atoms present in 4.02 × 1022 atoms of hydrogen is given by:
4.02 × 1022 atoms of hydrogen × 1 mol/6.022 × 1023 atoms = 0.0668 moles of hydrogen atoms
Since the stoichiometric ratio of hydrogen to water is 2:1, the number of moles of water that contains 0.0668 moles of hydrogen atoms is given by:
0.0668 moles of hydrogen atoms × 1 mol of water/2 moles of hydrogen atoms = 0.0334 moles of water
Therefore, 0.0334 moles of H2O contain 4.02 × 1022 atoms of hydrogen.
Learn more about hydrogen at: https://brainly.com/question/24433860
#SPJ11
Calculate the standard reaction enthalpy for the reaction below:
3Fe2O3(s) → 2Fe3O4(s) + ½O2(g)
The standard reaction enthalpy (ΔH°) for the given reaction is 235.8 kJ/mol.
The standard enthalpies of formation (H°f) of the associated reactants and products must be taken into account in order to get the standard reaction enthalpy (H°) for the given reaction.
The balanced equation is:
3Fe₂O₃(s) → 2Fe3O₄(s) + ½O₂(g)
The standard enthalpy of formation values for Fe2O3(s), Fe3O4(s), and O2(g) are required.
The values are:
ΔH°f(Fe₂O₃) = -824.2 kJ/mol
ΔH°f(Fe3O₄) = -1118.4 kJ/mol
ΔH°f(O₂) = 0 kJ/mol
Now, find the standard reaction enthalpy by using equation:
ΔH° = ΣnΔH°f(products) - ΣnΔH°f(reactants)
In which n is the stoichiometric coefficient of each substance.
Place the values, to get:
ΔH° = [2ΔH°f(Fe3O₄) + ½ΔH°f(O2)] - [3ΔH°f(Fe₂O₃)]
ΔH° = [2(-1118.4 kJ/mol) + ½(0 kJ/mol)] - [3(-824.2 kJ/mol)]
ΔH° = [-2236.8 kJ/mol] - [-2472.6 kJ/mol]
ΔH° = -2236.8 kJ/mol + 2472.6 kJ/mol
ΔH° = 235.8 kJ/mol
Thus, the standard reaction enthalpy (ΔH°) for the given reaction is 235.8 kJ/mol.
Learn more about enthalpy, here:
https://brainly.com/question/29998512
#SPJ1
an amino acid whose r group is predominantly hydrocarbon would be classified as
An amino acid whose R group is predominantly hydrocarbon would be classified as a nonpolar or hydrophobic amino acid.
Amino acids are the building blocks of proteins and are characterized by a central carbon atom (alpha carbon) bonded to an amino group, a carboxyl group, a hydrogen atom, and an R group. The R group, also known as the side chain, varies among different amino acids and determines their unique properties.
Hydrocarbon groups consist primarily of carbon and hydrogen atoms and are nonpolar in nature, meaning they have no charge separation and do not readily interact with water molecules. As a result, amino acids with hydrocarbon R groups tend to be hydrophobic, repelling water and preferring to be in nonpolar environments. Examples of amino acids with hydrocarbon R groups include alanine, valine, leucine, isoleucine, phenylalanine, and methionine.
In contrast, amino acids with R groups that contain polar functional groups, such as hydroxyl or amino groups, are classified as polar or hydrophilic. These polar R groups interact readily with water molecules due to their partial charges, making them hydrophilic.
Learn more about hydrocarbons at https://brainly.com/question/19453390
#SPJ11
which equation correctly represents the neutralization of aluminum hydroxide by sulfuric acid?
The neutralization reaction between aluminum hydroxide (Al(OH)₃) and sulfuric acid (H₂SO₄) can be represented by the following balanced equation:
2 Al(OH)₃ + 3 H₂SO₄ → Al₂(SO₄)₃ + 6 H₂O
In this reaction, two moles of aluminum hydroxide react with three moles of sulfuric acid to form one mole of aluminum sulfate (Al₂(SO₄)₃) and six moles of water (H₂O). The aluminum hydroxide acts as a base, and the sulfuric acid acts as an acid. The hydrogen ions (H⁺) from the sulfuric acid react with the hydroxide ions (OH⁻) from the aluminum hydroxide, resulting in the formation of water. Meanwhile, the aluminum and sulfate ions combine to form aluminum sulfate. This balanced equation accurately represents the neutralization of aluminum hydroxide by sulfuric acid.
Learn more about neutralization at https://brainly.com/question/27745033
#SPJ11
3. Which statement describes the types of data
scientists can obtain directly from observing
this fossil?
A. the exact time the organism lived
B. the color of the living organism
C. where the organism lived
D. the physical structures of the organism
There are numerous ways that fossils can form, but the majority occur when a living thing—such as a plant or animal—dies and is swiftly buried by sediment—such as mud, sand, or volcanic ash and rock.
Thus, Only the hard bones or shells are left behind when soft tissues degrade, yet in some cases an organism's soft tissues can be retained and animals.
More sediment, volcanic ash, or lava may accumulate over the organism after it has been buried, and eventually all the layers harden into rock.
These once-living organisms are only revealed to us from within the stones when the process of erosion takes place, when the rocks are worn back down and washed away and fossil.
Thus, There are numerous ways that fossils can form, but the majority occur when a living thing—such as a plant or animal—dies and is swiftly buried by sediment—such as mud, sand, or volcanic ash and rock.
Learn more about Fossils, refer to the link:
https://brainly.com/question/31419516
#SPJ1
Draw the Lewis structure for HCCH.
Draw the molecule by placing atoms on the canvas and connecting them with bonds. Include all hydrogen atoms and nonbonding electrons.
The Lewis structure of HCCH is a triple bond between the two carbon atoms and a single bond between each carbon atom and a hydrogen atom.
To draw the Lewis structure for HCCH (acetylene), follow the below steps:
Step 1: Find out the total number of valence electrons of all atoms.Valence electrons in H = 1 electron.Valence electrons in C = 4 electrons. Total valence electrons in HCCH molecule = (2 × 1) + (2 × 4) = 10 electrons.
Step 2: Choose the central atom and draw the bond line structure.The central atom in HCCH is C. Two H atoms are attached to one C atom, and another C atom is attached to it through a triple bond. HC≡CH
Step 3: Add electrons to outer atoms first.Complete octet of the H atoms by adding one electron to each. Two electrons have now been used. Still, there are 8 more electrons left. These electrons are used to complete the octet of the C atom. The C atom has only four valence electrons but it needs eight electrons to achieve octet configuration. Therefore, the C atom has four electrons short. These four electrons will come from the nonbonding electrons of the other C atom bonded to it.
Step 4: Add electrons to the central atom.The second C atom is also deficient in electrons. Therefore, it will have only two electrons in its valence shell. The other four electrons will be in the form of a triple bond with the first C atom. Since triple bond shares three electrons, two more electrons are needed to complete the octet of the second C atom. These electrons come from the nonbonding electrons of the first C atom bonded to it. Hence, the Lewis structure for HCCH (acetylene) is:Main Answer: H-C≡C-H
Therefore, the Lewis structure of HCCH is a triple bond between the two carbon atoms and a single bond between each carbon atom and a hydrogen atom.
To know more about Lewis structure visit:
brainly.com/question/29603042
#SPJ11
the carbon-14 dating method can be used to determine the age of a
The carbon-14 dating method can be used to determine the age of organic materials.
Carbon-14 (C-14) is an isotope of carbon that is present in the atmosphere and is taken up by living organisms during their lifetime. When an organism dies, it no longer takes in carbon-14, and the amount of C-14 in its remains gradually decreases over time through radioactive decay.The half-life of carbon-14 is approximately 5,730 years, which means that after this time, half of the carbon-14 in a sample will have decayed. By measuring the remaining amount of carbon-14 in a sample and comparing it to the known amount of carbon-14 in the atmosphere at the time the organism was alive, scientists can estimate the age of the sample.
To know more about atmosphere visit :
https://brainly.com/question/32358340
#SPJ11
given the thermochemical equations: a(g) b(g) ⟶b(g)⟶c(g)δ=90kjmolδ=−120kjmol find the enthalpy changes for three given reactions.
can be calculated by subtracting the enthalpy change for the second thermochemical equation from the first:∆H = ∆H1 - ∆H2∆H = 90 kJ/mol - (-120 kJ/mol)∆H = 210 kJ/mol , the enthalpy change for the reaction a(g) ⟶ b(g) is 210 kJ/mol.
Given the thermochemical equations: a(g) b(g) ⟶b(g)⟶c(g)δ=90kJ/molδ=−120kJ/molWe are given a thermochemical equation which includes a(g), b(g), and c(g) that produces 90 kJ/mol and -120 kJ/mol. We are asked to determine the enthalpy changes for three given reactions .The thermochemical equation for a reaction is given in terms of heat energy and standard temperature and pressure. It is important to note that thermochemical equations can be used to determine the amount of energy that is absorbed or released by a reaction.1. The enthalpy change for the reaction a(g) ⟶ c(g) can be calculated by adding the enthalpy changes for the two thermochemical equations given:∆H = ∆H1 + ∆H2∆H = 90 kJ/mol + (-120 kJ/mol)∆H = -30 kJ/mol Therefore, the enthalpy change for the reaction a(g) ⟶ c(g) is -30 kJ/mol.2. The enthalpy change for the reaction c(g) ⟶ a(g) can be calculated by reversing the signs of the enthalpy changes in the thermochemical equations given:∆H = -∆H1 - (-∆H2)∆H = -90 kJ/mol - (120 kJ/mol)∆H = -210 kJ/mol Therefore, the enthalpy change for the reaction c(g) ⟶ a(g) is -210 kJ/mol.3. The enthalpy change for the reaction a(g) ⟶ b(g)
to know more about enthalpy ,visit
https://brainly.com/question/14047927
#SPJ11
Which of the following must be true for a spontaneous exothermic process? a. only that ASsys 0 b. only that ASsys>0 c. both ASys <0 and the magnitude of ASsys the magnitude of AS e. either ASyr ASy <0 and the magnitude of ASsys < the magnitude of AS R sum sur suIT
Both ΔSsys < 0 and the magnitude of ΔSsys > the magnitude of ΔSsurr must be true for a spontaneous exothermic process. Thus, the correct option is e. either ΔSsys < 0 and the magnitude of ΔSsys > the magnitude of ΔSsurr.For a spontaneous exothermic process, both ΔSsys < 0 and the magnitude of ΔSsys > the magnitude of ΔSsurr must be true
.A spontaneous process is a process that occurs naturally and does not require external energy or intervention to occur. Exothermic reactions are those that release heat energy as a byproduct. Therefore, when a spontaneous process occurs, energy is released from the system to the surroundings, resulting in a decrease in entropy of the system. The entropy of the surroundings increases since the energy released from the system increases the disorder of the surroundings.
The change in entropy of a system is represented by ΔSsys.ΔSsys = Sfinal - SinitialWhat is ΔSsurr?The change in entropy of the surroundings is represented by ΔSsurr.ΔSsurr = - q / Twhere q is the heat absorbed by the surroundings from the system, and T is the temperature at which the heat transfer occurred.A spontaneous process occurs when ΔSsys + ΔSsurr > 0. However, in exothermic reactions, ΔSsys < 0 since energy is released from the system, resulting in a decrease in entropy of the system. Therefore, to satisfy ΔSsys + ΔSsurr > 0, ΔSsurr > 0. This implies that the entropy of the surroundings should increase as a result of the energy released by the system. Since the surroundings are at a lower temperature than the system, the magnitude of ΔSsurr should be greater than the magnitude of ΔSsys. This is represented as:|ΔSsurr| > |ΔSsys|
Therefore, both ΔSsys < 0 and the magnitude of ΔSsys > the magnitude of ΔSsurr must be true for a spontaneous exothermic process. Thus, the correct option is e. either ΔSsys < 0 and the magnitude of ΔSsys > the magnitude of ΔSsurr.
To learn more about spontaneous visit;
https://brainly.com/question/5372689
#SPJ11
ammonia is a weak base that will react in water following the equation below. nh3 h2o⟶x oh− what is the chemical formula for the conjugate acid of nh3?
Ammonia (NH₃) being a weak base, accepts the hydrogen ion from water to form its conjugate acid, ammonium (NH₄⁺).
Ammonia (NH₃) is a weak base that reacts with water (H₂O) to form its conjugate acid and a hydroxide ion (OH⁻) in the process called acid-base reaction. When NH₃ interacts with H₂O, a hydrogen ion (H⁺) from water is transferred to ammonia, resulting in the formation of the conjugate acid of NH₃, which is ammonium (NH₄⁺). At the same time, the hydroxide ion (OH⁻) is produced as a byproduct. The overall balanced equation for this reaction is:
NH₃ (aq) + H₂O (l) ⟶ NH₄⁺ (aq) + OH⁻ (aq)
Here, the chemical formula for the conjugate acid of ammonia (NH₃) is NH₄⁺. It is essential to understand that a conjugate acid is formed when a base accepts a hydrogen ion (H⁺) from the reacting species. In this case, ammonia (NH₃) being a weak base, accepts the hydrogen ion from water to form its conjugate acid, ammonium (NH₄⁺).
Learn more about conjugate acid here:
https://brainly.com/question/31229565
#SPJ11
the entropy change for a real, irreversible process is equal to:
The entropy for a real irreversible process is positive.
Entropy is the measure of a system's thermal energy per unit temperature that is unavailable for doing work. It is a measure of molecular disorder or randomness of system.
It gives deep insight of whether the reaction is spontaneous or non-spontaneous. The concept of entropy express the second law of thermodynamics. It is a state function, does not depend on path of the reaction.
In a irreversible process, system and surronding do not return to the original condition once the process is initiated. An irreversible process increases, does not move backward, so randomness increases which led to increase in entropy. Increase in energy of the system, increases the entropy of that system, because it allows higher energy level to be significantly occupied.
It can be explained by second law of thermodynamics which states that entropy change for a universe increases for a irreversible or spontaneous process.
To know more about entropy,
https://brainly.com/question/6364271
The entropy change for a real, irreversible process is equal to the ratio of heat transferred to the system and the temperature of the surroundings.
This is according to Clausius' inequality that states that the change in entropy of a system is equal to or greater than the ratio of heat transferred to the system and the temperature of the surroundings, expressed as ∆S ≥ Q/T. A real, irreversible process is one that occurs under friction, turbulence, and other non-ideal conditions that result in a net increase in the entropy of the system and the surroundings.
In this case, the entropy change (ΔS) is greater than zero, which means that the process is irreversible. The equation for calculating entropy change in a real, irreversible process is given by:ΔS = Q/T Where:ΔS = entropy change Q = heat transferred to the system T = temperature of the surroundings.
Therefore, the entropy change for a real, irreversible process is equal to the ratio of heat transferred to the system and the temperature of the surroundings and can be calculated using the equation ∆S = Q/T.
To know more about entropy, refer
https://brainly.com/question/419265
#SPJ11
what is the ph of a solution prepared by mixing 25.00 ml of 0.10 m ch3co2h
The pH of a solution can be calculated using the formula pH = -log[H+]. Here, we are given the volume and molarity of CH3CO2H. The pH of the given solution is 4.89.
We can use this information to find the concentration of H+ ions in the solution and then calculate the pH. To begin with, we need to write the dissociation equation of CH3CO2H which is: CH3CO2H ⇌ CH3CO2- + H+The equilibrium constant of this reaction is represented as Ka and can be calculated using the expression Ka = [CH3CO2-][H+]/[CH3CO2H]. At equilibrium, the concentration of CH3CO2- is equal to the concentration of H+ ions. Let x be the concentration of H+ ions. Then, we have:[x][x]/[0.10-x] = 1.8 x 10^-5Solving for x, we get x = 1.3 x 10^-5Therefore, [H+] = 1.3 x 10^-5 mol/LpH = -log[H+]pH = -log(1.3 x 10^-5)pH = 4.89.
The pH of the given solution is 4.89.
To Know more about molarity visit:
brainly.com/question/31545539
#SPJ11
what is the solubility of la(io₃)₃ in a solution that contains 0.300 m io₃⁻ ions? (ksp of la(io₃)₃ is 7.5 × 10⁻¹²)
The molar solubility of La(IO₃)₃ in a solution containing 0.300 M IO₃⁻ ions, and its Ksp value is 7.5 × 10⁻¹² is 3.41 × 10⁻¹⁰ M.What is solubility
Solubility is the amount of solute that can dissolve in a given solvent to form a saturated solution at a specified temperature and pressure. The quantity of solute dissolved per unit volume of solvent at equilibrium at a certain temperature is known as the solubility of a substance. Furthermore, the equilibrium constant for the dissociation reaction of a salt into its ions is known as the solubility product constant, Ksp. The molar solubility of a solid ionic compound is the number of moles of the compound that dissolve to create a liter of solution of that compound.Let's calculate the molar solubility of La(IO₃)₃:La(IO₃)₃→ La³⁺ + 3 IO₃⁻At equilibrium, let the solubility of La(IO₃)₃ be 's' mol/L.So, [La³⁺] = s mol/L and [IO₃⁻] = 3s mol/L.Thus, Ksp = [La³⁺][IO₃⁻]³= s × (3s)³= 27s⁴Ksp of La(IO₃)₃ is given as 7.5 × 10⁻¹²Molar solubility, s = [La³⁺] = [IO₃⁻]/3= sqrt (Ksp/27)= sqrt (7.5 × 10⁻¹²/27)= 3.41 × 10⁻¹⁰ M.So, the molar solubility of La(IO₃)₃ in a solution containing 0.300 M IO₃⁻ ions, and its Ksp value is 7.5 × 10⁻¹² is 3.41 × 10⁻¹⁰ M.
To know more about moles, visit ;
https://brainly.com/question/29367909
#SPJ11
the following question refers to a 1.0-liter buffered solution created from 0.34 m nh 3 ( k b = 1.8 × 10 –5) and 0.26 m nh 4f. when 0.10 mol of h ions is added to the solution what is the ph?
The pH of the buffered solution is 11.79 when 0.10 mol of H+ ions is added to the solution.
Buffered solution is a solution that maintains a nearly constant pH when a small amount of acid or base is added to it. It is made by mixing a weak acid (or base) and its conjugate base (or acid).Given, 0.34 M NH3 with Kb = 1.8 × 10–5and0.26 M NH4F.
When 0.10 mol of H+ions are added to the solution, we need to find the pH.So, NH3 acts as a weak base, its dissociation is given below: NH3 + H2O ⇌ NH4+ + OH- Initial( M) 0.34 0 0 Change( M) -x +x +x
Equilibrium ( M) 0.34-x x x Kb = [NH4+][OH-]/[NH3]Kb = x2/0.34-xx = √(0.34 × 1.8 × 10^-5) = 6.14 × 10^-3pOH = -log [OH-] = -log 6.14 × 10^-3 = 2.21pH = 14 - pOH = 14 - 2.21 = 11.79
Hence, the pH of the buffered solution is 11.79 when 0.10 mol of H+ ions is added to the solution.
To learn more about solution visit;
https://brainly.com/question/1616939
#SPJ11
which soil particle has the greatest total surface area per gram?
Among soil particles, clay particles have the greatest total surface area per gram. Clay particles are the smallest soil particles, typically measuring less than 0.002 millimeters in diameter. Due to their small size, clay particles have a large surface area relative to their mass.
The high surface area of clay particles is primarily attributed to their plate-like structure and their ability to form intricate networks and layers. These properties result in a significant increase in the exposed surface area, allowing clay particles to interact more extensively with water, nutrients, and other soil components.
In contrast, larger soil particles such as sand and silt have relatively lower surface areas per gram compared to clay particles. Sand particles range from 0.05 to 2.0 millimeters in diameter, while silt particles fall between sand and clay in terms of size.
Overall, the small size and plate-like structure of clay particles contribute to their significantly higher total surface area per gram compared to other soil particles, making them more effective in various soil processes and interactions.
Learn more about the surface area at https://brainly.com/question/951562
#SPJ11
what is the molarity of a solution that contains 17.0g of nh3
The molarity of a solution that contains 17.0 g of NH3 is 2.00 M
Molarity is defined as the number of moles of solute per liter of solution. To calculate the molarity of a solution, we require the number of moles of solute as well as the volume of the solution.
N = Mass / Molar mass
N = 17 / 17.03 (mol)
N = 1 mol
Here, N = no. of moles
Assuming the volume of the solution to be 0.50 L, we have
M = Number of moles / Volume of solution
M = 1.00 mol / 0.50 L
M = 2.00 M
Therefore, the molarity of a solution that contains 17.0 g of NH3 is 2.00 M.
To learn more about Molarity:
https://brainly.com/question/30404105
https://brainly.com/question/14469428
" Although Part of your question might be missing, you might be referring to this full question: what is the molarity of a solution that contains 17.0g of nh3 in 0.50 L sol "
Answer:
13.3 M
Explanation:
The molecular mass of NH 3 is 17.03 g/mol. Hence, the molarity in terms of NH 3 would be: 0.25 (g NH 3 / g aq. sol.)·0.907 (g aq. sol. / cm 3)· (1000 cm 3 /dm 3)/ (17.03 g NH 3 /mol NH 3) = 13.3 M (as NH 3).
what is δhrxn∘ for the following chemical reaction? co2(g)+2koh(s)→h2o(g)+k2co3(s)
ΔH°rxn would be negative for this reaction. It indicates an exothermic reaction, implying that energy is released to the surroundings during the reaction.
The reaction mentioned in the question is as follows:CO2(g) + 2KOH(s) → H2O(g) + K2CO3(s)
The enthalpy change for a reaction, δHrxn∘, is the heat produced or absorbed during the chemical reaction that takes place at a constant pressure.
The enthalpy of the products minus the enthalpy of the reactants is equal to the enthalpy change of the system for a chemical reaction.
The reaction mentioned above can be split into two stages, which are the breaking of bonds in reactants and the formation of new bonds in products.
The reaction is exothermic since heat is released in the reaction. ΔHrxn is negative.
Since the enthalpy change for the given reaction is negative, this implies that the reaction is exothermic.
Exothermic reactions are characterized by the liberation or giving off of heat.
Therefore, we can conclude that when carbon dioxide reacts with potassium hydroxide to produce water and potassium carbonate, heat is released into the surroundings.
Learn more about exothermic reaction at: https://brainly.com/question/2924714
#SPJ11
hy. please help. calculate the volume of water should be added into 25 ml of 0.10 m HCL solution to diluted 5 times
To calculate the volume of water that should be added to dilute 25 ml of 0.10 M HCl solution by a factor of 5, we can use the formula: V₁C₁ = V₂C₂
Dilution refers to the process of reducing the concentration of a solute in a solution by adding a solvent, typically water. It involves adding more solvent to the solution to increase its total volume while keeping the amount of solute constant. This results in a less concentrated solution.
In dilution, the ratio of solute to solvent decreases, which leads to a decrease in the overall concentration. The dilution factor indicates the extent of the dilution and is expressed as the ratio of the initial volume of the solution to the final volume after dilution.
Substituting the given values into the formula:
25 ml * 0.10 M = V₂ * (0.10 M / 5)
Simplifying the equation:
2.5 = V₂ * 0.02
Dividing both sides by 0.02:
V₂ = 2.5 / 0.02
V₂ = 125 ml
Therefore, to dilute 25 ml of 0.10 M HCl solution by a factor of 5, you should add 125 ml of water.
For more details regarding dilution, visit:
https://brainly.com/question/28548168
#SPJ1
select the statements that correctly describe an object in thermal equilibrium with a reservoir.
The object and the reservoir have the same temperature: In thermal equilibrium, the temperature of the object and the temperature of the reservoir are equal. There is no net heat transfer occurring between the two.
There is no change in temperature over time: In thermal equilibrium, the temperature of the object remains constant over time. There is no net flow of heat between the object and the reservoir.The object and the reservoir are in thermal contact: For thermal equilibrium to be achieved, the object and the reservoir must be in direct or indirect thermal contact. This allows for the transfer of thermal energy between them until their temperatures equalize.
To know more about energy visit :
https://brainly.com/question/8630757
#SPJ11
a bowling ball has a mass of 3.6 kg, a moment of inertia of 0.010 kg m², and a radius of 0.23 m. if it rolls down the lane without slipping at a linear speed of 3.4 m/s, what is its total energy?
The total energy of the rolling bowling ball is approximately 51.8 J. The total energy of a rolling bowling ball with a mass of 3.6 kg, a moment of inertia of 0.010 kg m², and a radius of 0.23 m when rolling down the lane without slipping at a linear speed of 3.4 m/s is approximately 51.8 J.
The total energy of the bowling ball is equal to the sum of its kinetic energy and potential energy, or: Etotal = KE + PE where KE is the kinetic energy and PE is the potential energy. Kinetic energy (KE) can be calculated using the formula: KE = 1/2mv²where m is the mass of the bowling ball and v is its linear speed.
Kinetic energy = 1/2 x 3.6 kg x (3.4 m/s)²Kinetic energy = 20.8 J. Potential energy (PE) can be calculated using the formula:PE = mgh, where m is the mass of the object, g is the acceleration due to gravity, and h is the height above a reference point where the potential energy is defined to be zero.
In this case, the potential energy is defined to be zero at the height of the lane, so the height of the ball is equal to the radius of the ball multiplied by the sine of the angle of the lane, which is assumed to be negligible.Potential energy = 0.0 J. Total energy is equal to:Total energy = kinetic energy + potential energy Total energy = 20.8 J + 0.0 JTotal energy = 20.8 J.
Therefore, the total energy of the rolling bowling ball is approximately 51.8 J.
To learn more about energy visit;
https://brainly.com/question/1932868
#SPJ11
what is the equivalence point volume, in milliliters, for titration of 51.5 ml of 0.15 m h c l o 4 with a sample of 0.35 m n a o h ?
The equivalence point volume for the titration is 22.07 mL (to 3 significant figures). The equivalence point volume refers to the volume of the titrant required for the reaction to reach its equivalence point. In acid-base titrations, the equivalence point is reached when the number of moles of acid and base are equal.
This means that the equivalence point volume can be calculated by using the stoichiometry of the reaction and the concentration of the titrant
.Let us calculate the equivalence point volume for the titration of 51.5 mL of 0.15 M HClO4 with a sample of 0.35 M NaOH.
Step 1: Write the balanced chemical equation for the reaction: HClO4 + NaOH → NaClO4 + H2OStep
2: Determine the stoichiometry of the reaction1 mole of HClO4 reacts with 1 mole of NaOH. This means that the number of moles of HClO4 in the sample is given by: moles of HClO4 = concentration x volume = 0.15 M x 51.5 mL / 1000 mL/L = 0.007725 moles
Step 3: Use the stoichiometry to determine the number of moles of NaOH required to reach the equivalence point since the stoichiometry is 1:1, the number of moles of NaOH required to reach the equivalence point is equal to the number of moles of HClO4 in the sample.
Therefore, the number of moles of NaOH required is also 0.007725 moles.
Step 4: Use the concentration of NaOH to determine the volume required to reach the equivalence point. The number of moles of NaOH required is given by: moles of NaOH = concentration x volume
volume = moles of NaOH / concentration = 0.007725 moles / 0.35 M = 0.02207 L = 22.07 mL
Therefore, the equivalence point volume for the titration is 22.07 mL (to 3 significant figures).
To learn more about volume visit;
https://brainly.com/question/28058531
#SPJ11
which compound undergoes solvolysis in aqeous ethanol most rapidly
The steric hindrance destabilizes the carbocation intermediate, and therefore, solvolysis in aqueous ethanol becomes more rapid. Solvolysis is the process where a chemical bond is broken by a solvent.
When a chemical bond is broken by a solvent, it is known as solvolysis. In this case, the compound that undergoes solvolysis in aqueous ethanol most rapidly is tertiary alkyl halide. Tertiary alkyl halides are the halides with three R groups (alkyl groups) attached to the carbon atom that is bonded to the halogen atom (Cl, Br, or I).The primary and secondary alkyl halides are less reactive towards solvolysis in aqueous ethanol than tertiary alkyl halides. This is due to the steric hindrance caused by the R-groups present in tertiary alkyl halides. In general, compounds that have better leaving groups (e.g., halides like iodide or tosylate) tend to undergo solvolysis more about rapidly. Additionally, compounds with a more stable carbocation intermediate can also exhibit faster solvolysis rates.
to know more about solvolysis, visit
https://brainly.com/question/4487995
#SPJ11
how many unpaired electrons would you expect for the complex ion [cocl4] 2- if it is a tetrahedral shap
The tetrahedral complex ion [CoCl4]2- has 0 unpaired electrons.How many unpaired electrons would you expect for the complex ion [CoCl4]2- if it is a tetrahedral shape.
The complex ion [CoCl4]2- is a tetrahedral shape because the Co2+ ion is surrounded by four chloride ions. The tetrahedral shape has 109.5 degrees between each bond of the four ligands with the central atom.If we follow the crystal field theory, the t2g orbitals will be completely filled with electrons, and there will be no electrons in the eg orbitals. Since all of the electrons in the outer orbitals are paired, the tetrahedral complex ion [CoCl4]2- has 0 unpaired electrons.
To know more about electron , visit ;
https://brainly.com/question/860094
#SPJ11
Q3 (10 points) Find w, x, y and z such that the following chemical reaction is balanced. w Ba3 N₂ + xH₂O →yBa(OH)2 + 2NH3
The balanced chemical reaction will be;Ba3N2 + 6H2O → 3Ba(OH)2 + 2NH3. The values of w, x, y, and z are w = 2z and w = y = 3x.
The given chemical reaction is unbalanced. So, we have to balance it. Let the coefficient of Ba3N2 is w, the coefficient of H2O is x, the coefficient of Ba(OH)2 is y, and the coefficient of NH3 is z. So, the balanced chemical reaction is: wBa3N2 + x6H2O → y3Ba(OH)2 + z2NH3
Coefficient of Ba: 3w = 3y => w = y
Coefficient of N: 2z = w => w = 2z
Coefficient of H: 6x = 2z => z = 3x
Coefficient of O: 2y = 6x => y = 3x
So, the final coefficients are: w = y = 3x and w = 2z
The balanced chemical reaction is; Ba3N2 + 6H2O → 3Ba(OH)2 + 2NH3. Hence, the values of w, x, y, and z are w = 2z and w = y = 3x.
More on chemical reaction: https://brainly.com/question/29762834
#SPJ11
the skeletal formula represents what type of alcohol? group of answer choices primary secondary tertiary quaternary none
The skeletal formula alone does not provide sufficient information to determine the type of alcohol. The classification of alcohols as primary, secondary, tertiary, or quaternary is based on the arrangement of carbon atoms bonded to the carbon bearing the hydroxyl group (OH).
In a primary alcohol, the carbon bearing the hydroxyl group is bonded to only one other carbon atom. In a secondary alcohol, the carbon bearing the hydroxyl group is bonded to two other carbon atoms. In a tertiary alcohol, the carbon bearing the hydroxyl group is bonded to three other carbon atoms. Quaternary alcohols, on the other hand, have the hydroxyl group attached to a quaternary carbon, which is a carbon atom bonded to four other distinct substituents.To determine the type of alcohol, additional information about the carbon atom(s) bonded to the hydroxyl group is needed. The skeletal formula alone does not provide this information
To learn more about alcohol:
https://brainly.com/question/29203238
#SPJ11
Chromosomes are correctly described by which of the following?
Always formed in an X shaped molecule
Two polymers strands of amino acids that bond together and wrap like a spiral
Two polymers strands of nucleotides that bond together and twist around .
all of the choices are correct
Chromosomes are correctly described by the statement: "Two polymer strands of nucleotides that bond together and twist around."
Chromosomes are composed of DNA, which consists of two long strands of nucleotides that are bonded together and twisted to form a double helix. The other choices are incorrect because chromosomes are not always formed in an X-shaped molecule (this shape only occurs during cell division) and they are not composed of amino acids (which are the building blocks of proteins, not DNA).
The correct description of chromosomes is that they are made of two polymer strands of nucleotides that bond together and twist around each other.
For more information on chromosome kindly visit to
https://brainly.com/question/30077641
#SPJ11
draw a structural formula for the intermediate in the following reaction:ch2cl2
The structural formula for the intermediate in the following reaction is: C-Cl-OH-OH-Cl-C. The chemical reaction of CH₂Cl₂ is represented by the following equation CH₂Cl₂ + 2 NaOH → CH₂(OH)₂ + 2 NaCl
The intermediate structure of the following reaction has been illustrated in the figure below.
We know that sodium hydroxide (NaOH) is a strong base. A strong base can react with the hydrogen on the hydrogen chloride (HCl) molecule. NaOH will take away H from HCl and produce NaCl (sodium chloride) and water (H₂O).
The reaction proceeds as follows. CH₂Cl₂ → CCl₂ + CH₂CCl₂ + 2NaOH → CCl₂(OH)₂ + 2NaCl. Thus, the structural formula for the intermediate in the following reaction is: C-Cl-OH-OH-Cl-C.
To know more about structural formula, refer
https://brainly.com/question/30114649
#SPJ11
use standard enthalpies of formation in the table above to determine δhorxn for the reaction: al2o3(s) 3co(g)→2al(s) 3co2(g) 1393 kj -3188 kj -1392.7 kj 826.7 kj
The given standard enthalpies of formation should be used to determine the δhorxn for the given reaction:Al2O3(s) + 3CO(g) → 2Al(s) + 3CO2(g)Reactants: Al2O3(s) + 3CO(g)In the table above, Al2O3(s) and CO(g) are given, and their corresponding standard enthalpies of formation are -1675.69 kJ/mol and -110.53 kJ/mol respectively. The value of ΔHorxn for the given reaction is 1007.28 kJ/mol.
The total enthalpy of reactants = (-1675.69 kJ/mol x 1) + (-110.53 kJ/mol x 3) = -1007.28 kJ/molProducts: 2Al(s) + 3CO2(g) The standard enthalpy of formation for Al(s) and CO2(g) are zero (0), because they are the standard state of elements. Total enthalpy of products = 0 kJ/mol + 0 kJ/mol = 0 kJ/molHence, the standard enthalpy of reaction (ΔHorxn) is:ΔHorxn = total enthalpy of products - total enthalpy of reactantsΔHorxn = 0 - (-1007.28 kJ/mol)ΔHorxn = 1007.28 kJ/molTherefore, the value of ΔHorxn for the given reaction is 1007.28 kJ/mol.
To Know more about enthalpies of formation visit:
brainly.com/question/30761452
#SPJ11
it is observed that 7.5 mmol of baf2 will dissolve in 1.0 l of water. use these data to calculate the value of ksp for barium fluoride.
Solubility product constant, or Ksp, is the product of the ion concentrations present in a saturated solution of an ionic compound at a given temperature. Solubility is the maximum amount of solute that can be dissolved in a solvent at equilibrium.
The solubility of barium fluoride (BaF2) in water is 7.5 mmol/L. The value of Ksp for barium fluoride can be calculated by using the formula of solubility product constant.Explanation:Let's take a look at the balanced equation for the dissolution of barium fluoride in water;BaF2(s) ⇌ Ba2+(aq) + 2F-(aq)The equilibrium expression for this reaction is as follows;Ksp = [Ba2+][F-]2According to the question, 7.5 mmol of baf2 will dissolve in 1.0 L of water. This can be represented as;[BaF2] = 7.5 mmol/L = [Ba2+][F-]2 [Concentration of Ba2+ = [F-] = (7.5 mmol/L)1/3 = 2.14 mmol/L] Substituting the values into the Ksp expression;Ksp = [Ba2+][F-]2 = (2.14 x 10^-3 mol/L) x (7.5 x 10^-3 mol/L)2 = 2.9 x 10^-9 mol3/L3Therefore, the value of Ksp for barium fluoride is 2.9 x 10^-9 mol3/L3.
For more information on ksp visit:
brainly.com/question/31388983
#SPJ11
what is the concentration of hcl if 20m of acid is neutralized by 30 ml of a 0.1 m solution of sodium hydroxide
The concentration of the acid that is neutralized by the base is 0.15 M
What is neutralization?
A chemical reaction between an acid and a base that produces salt and water is referred to as neutralization. A neutral or nearly neutral solution is created as a result of the procedure, which balances the reactants' acidic and basic characteristics.
In a neutralization process, the base receives a hydrogen ion (H+) that the acid has donated.
We can see that the reaction equation is;
HCl + NaOH ---->NaCl + H2O
Then;
Number of moles of the NaOH = 0.1 M * 30/1000
= 0.003 moles
We have that;
n = CV
C = n/V
C = 0.003 * 1000/20
C = 0.15 M
Learn more about neutralization:https://brainly.com/question/14156911
#SPJ4