Answer:
c) evaporating
d) has no salt in it
Explanation:
no problem anytime. just try to understand the concept and it will definitely help if you read the question more than once.
the change of state that is happening the surface of the sea water is evaporating. This is because it allows from liquid to vapour/ gas based on the diagram
the water in the test tube is different from sea water because it is pure meaning no salt. It's evident based on figure 2 because sea water is full of solutions and mixtures.
Determine the pressure inside a television picture tube with a volume of 3.50 L that contains
2.00 X 10^-5 g of nitrogen gas at 22°C.
The pressure inside the television tube containing 2×10¯⁵ g of N₂ at 22 °C is 4.94×10¯⁶ atm
How to determine the mole of fluorine gasMass of N₂ = 2×10¯⁵ gMolar mass of N₂ = 2 × 14 = 28 g/mol Mole of N₂ =?Mole = mass / molar mass
Mole of N₂ = 2×10¯⁵ / 28
Mole of N₂ = 7.14×10¯⁷ mole
How to determine the pressure Volume (V) = 3.5 LTemperature (T) = 22 °C = 22 + 273 = 295 KGas constant (R) = 0.0821 atm.L/Kmol Number of mole (n) = 7.14×10¯⁷ molePressure (P) = ?The pressure inside the television tube can be obtained by using the ideal gas equation as follow:
PV = nRT
Divide both side by V
P = nRT / V
P = (7.14×10¯⁷ × 0.0821 × 295) / 3.5
P = 4.94×10¯⁶ atm
Learn more about ideal gas equation:
https://brainly.com/question/4147359
A compound formed with potassium and bromine that can detect blood in a stain by reacting with it to form distinctive crystals
Answer:
Potassium Bromide
Explanation:
not sure but i think thats it
I can't seem to figure out how to set up charts so there's just a screenshot of the question in the file attached :) Thank's for any help!!
Answer:
See Explanation
Explanation:
Volume of base used = (31.79 - 1.6) + (32.12 - 0.98) + (42.87 -13.21)/3 = 30.34 cm3
Volume of acid used = (24.86 - 0.42) + (24.11 - 0.11) + (27.67 -3.42)/3 = 24.23 cm3
For trial 1= number of moles of HBr = 24.44/1000 * 0.3 = 0.0073 moles
For trial 2= number of moles of HBr = 24/1000 * 0.3 = 0.0072 moles
For trial 3= number of moles of HBr = 0.0089 moles
HBr(aq) + KOH(aq) -----> KBr(aq) + H2O(l)
One mole of base is required to neutralize one mole of acid.
From CAVA/CBVB =nA/nB
CAVAnB = CBVBnA
CB = CAVAnB/VBnA
CB = 0.3 * 24.23 * 1/30.34 * 1
CB = 0.24 moldm-3
number of moles of KOH = concentration * volume
number of moles = mass/molar mass
molar mass of KOH = 56 g/mol
mass/56 = 0.24 * 30.34/1000
mass = 0.24 * 30.34/1000 * 56
mass =0.408 g of KOH
What is the mole fraction of ethanol (C2H5OH) in a solution of 47.5 g of ethanol in 850 g of water?
Answer:
0.021
Explanation:
that's the answer because I just did an exam that included this question and then the miss explained to me why this was the answer, but don't worry am 100% sure the answer is 0.021 .
The mole fraction of ethanol in a solution of 47.5 g of ethanol in 850 g of water is 0.021.
How we calculate the mole fraction?Mole fraction of any substance present in solution will be calculted by dividing the moles of sample to the total moles of solution.
Moles will be calculated as:
n = W/M , where
W = given mass
M = molar mass
Moles of ethanol will be calculated as:
n = 47.5g / 46.07g/mol = 1.03 moles
Moles of water will be calculated as:
850g / 18g/mol = 47.18 moles
Total moles of solution = 1.03 + 47.18 = 48.21 moles
Mole fraction of ethanol in water will be calculated as:
mole fraction = 1.03 / 48.21 = 0.021
Hence, mole fraction is 0.021.
To know more about mole fraction, visit the below link:
https://brainly.com/question/25468666
Which element is more reactive, Almuminum (Al) or Chlorine (Cl)?
How many grams of HCl(aq) are required to react completely with 1.25g of Zn(s) to form ZnCl2(aq) and H2
1.39 g HCl
Explanation:
The balanced chemical equation for this reaction is given by
Zn(s) + 2HCl(aq) ---> ZnCl2(aq) + H2(g)
Convert the # of grams of Zn to moles:
1.25 g Zn × (1 mol Zn/65.38 g Zn) = 0.0191 mol Zn
Use the molar ratio to find the # of moles of HCl needed to react completely with the given amount of Zn:
0.0191 mol Zn × (2 mol HCl/1 mol Zn) = 0.0382 mol HCl
Convert this amount to grams:
0.0382 mol HCl × (36.458 g HCl/1 mol HCl) = 1.39 g HCl
Structures and Forces - What is force and external forces.
Question 1) Jacob and Ravleen are moving furniture. They need to move the filing cabinet over 6 feet and it is very heavy. Jacob wants to apply force and push it by putting his hands on point A because he thinks it would be easier to move it from the top as there is less weight on the top. Ravleen says it's better to push at point B because the center of gravity is lower. Which person is correct and EXPLAIN why and what may happen if it is pushed in the wrong spot.
Answer:
The restoring force that prevents the furniture from tipping over when pushing the furniture towards the right, F= W × D
Where;
W = The weight of the furniture
D = The horizontal distance from the center of gravity of the furniture, CG and the to the lower right corner of the furniture
Given that A > D, for the furniture to tip over when pushing above the CG, we have;
F1 × A ≤ W × D
∴ F1 << W or for a force much smaller than W, the weight of the furniture applied above the center of gravity, the furniture will tip over
However when the force F2 is applied, where C < D, we have for no tipping over;
F2 × C ≤ W × D, therefore, given that C < D, when a force much higher than the weight, W, is applied at F2, the furniture will remain upright
Therefore, it is better push at a point lower than or equal to the center of gravity, whereby the point B is lower than the center of gravity, it is better to push at point B, Ravleen is correct and it is better to push at point B because the center of gravity is lower
If the furniture is pushed at the wrong spot it may tip over
Please see attached drawing
Explanation:
An 8.0 L sample of neon gas at 300. K exerts a pressure of 900. kPa. If the gas is compressed to 2.0 L and the temperature is raised to 600. K, what will be the new pressure?
Answer:
7200 kPa
Explanation:
Applying,
PV/T = P'V'/T'................ Equation 1
Where P = Initial pressure of neon gas, V = Initial volume of neon gas, T = Initial temperature of neon gas, P' = Final pressure of neon gas, V' = Final volume of neon gas, T' = Final Temperature of neon gas
Make P' the subject of the equation
P' = PVT'/V'T.............. Equation 2
Given: P = 900 kPa, V = 8.0 L, T = 300 K, V' = 2.0 L, T' = 600 K
Substitute these values into equation 2
P' = (900×8×600)/(2×300)
P' = 7200 kPa
How speak fluent English.
Answer:
practise, because it helps you get comfortable in speaking english
and there is also a quote that says "practise makes perfect"
Explanation:
HOPE IT HELPS
Need help on this question asap please please I’m going to really appreciate it
Answer:
0.11 moles
Explanation:
The equation of the reaction is;
2SO2 + O2 ------>2SO3
Number of moles of O2 in 3.42 g = 3.42g/32 g/mol = 0.11 moles
Hence, 0.11 moles of O2 is consumed when 3.42 g of O2 reacts with SO2 to form SO3.
!!URGENT URGENT URGENT!! 100 POINTS!!!!!!!!!! If anyone gives me a wrong answer or any other bull you will be reported immediately. Did anyone do the Equilibrium lab 07.06 for Chemistry FLVS? If so I need it URGENTLY my DBA is tomorrow and I will change your writing to mine I'm very good at that I promise just PLEASE HELP ME!!!!!!!!!!
Answer:
is it the one where the objective was : To observe the changes in equilibrium when different components are added or taken away.
What is the difference in a transverse and a longitudinal wave?
Group of answer choices
Transverse waves are bigger than longitudinal waves
A transverse wave has crests and troughs and a longitudinal has compressions and rarefactions.
Transverse waves are sound waves and longitudinal waves are light waves.
Answer:
A transverse wave has crests and troughs and a longitudinal has compressions and rarefactions.
Answer question in picture
(D)
Explanation:
On the left side two molecules, each made of 2 grays and 3 blues, which suggests that only (D) offers the right combination: 2 Al atoms and 3 O atoms that make up Al2O3.
what are the key components of nitrogen cycle
Answer:
Important processes in the nitrogen cycle include fixation, ammonification, nitrification, and denitrification.
Explanation:
The key components of nitrogen cycle are :nitrogen fixation, nitrification, assimilation, ammonification and denitrification.
What is nitrogen cycle?It is a bio-geochemical cycle through which nitrogen is converted into multiple chemical forms when it circulates among atmospheric, terrestrial and marine ecosystems .
Conversion of nitrogen is carried out through physical and biological processes.Nitrogen cycle is important as it affects of ecosystem processes like primary production and decomposition.
Conversion of nitrogen gas to nitrates and nitrites through atmospheric , industrial and biological processes is called nitrogen fixation. Nitrogen is assimilated in plants in form of nitrates or ammonium forms.When an animal or plant dies the nitrogen in organic form is converted to ammonium which is mineralization.
Learn more about nitrogen cycle,here:
https://brainly.com/question/28096816
#SPJ2
Which is NOT a way to accelerate an object? *
If you want to eat foods that contain less additives, what could you do?
A.
Stay away from packaged foods.
B.
Stay away from fresh fruits and vegetables.
Answer: the answer is a
Explanation:
always eat fresh fruits and veggiies.
What happens when two plates move alongside each other?
Answer:When two plates travel in the same direction, they intersect or collide. A convergent boundary is a collision between two plates that are traveling in the same direction. Large damaging earthquakes occur from the collision. The forming of massive folded mountains occurs as two continental plates collide.
Explanation:
A fertilized egg, or a
, is formed from the fusion of egg and sperm.
Na+ and P-3 whats the formula and whats the name of it
Answer:
sodium phosphide!!!!!!!!!!!!!!!
Write a balanced equation out of these chemicals
Answer:
2Na + 2H20--> 2NaOH+H2
............. this is the ans
What set of coefficients will balance the chemical equation: _NaBr (aq) + _H3PO4 (aq) → _Na3PO4(aq) + _HBr (aq)
A. 3,1,1,3
B. 1,2,3,1
C. 3,1,3,1
D. 1,1,3,3
The Balanced chemical equation for above reaction will be :
[tex] \small{ \mathrm{3NaBr + H_3PO_4 \rightarrow Na_3PO_4 + 3HBr}}[/tex]
The Coefficients will be :
[tex]NaBr - 3[/tex][tex]H_3PO_4 - 1[/tex][tex]Na_3PO_4 - 1[/tex][tex]HBr - 3 [/tex]So, Correct option is :
A. 3, 1, 1, 3
_____________________________
[tex]\mathrm{ \#TeeNForeveR}[/tex]
The pressure of 25.0 L is increased from 11.0 kPa to 16.0 kPa. What is the new pressure
Answer:
Explanation:
To calculate the percentage of people who have a particular allele population studies are conducted to collect data.true or false
What is the difference between Mitosis and Meiosis?
Somebody please help this is due in 30 minutes! (picture is attached)
44.5 g Al2(SO4)3
Explanation:
# moles Ba(NO3)2 = (0.543M)(0.717 L)
= 0.389 mol Ba(NO3)2
Now we use the molar ratios,
0.389 mol Ba(NO3)2 ×(1 mol Al2(SO4)3/3 mol Ba(NO3)2)
= 0.130 mol Al2(SO4)3
0.130 mol Al2(SO4)3 × (342.15 g Al2(SO4)3/(1 mol Al2(SO4)3)
= 44.5 g Al2(SO4)3
A gas cylinder contains exactly 15 moles of oxygen gas (O2). How many molecules of oxygen are in the cylinder
Answer:
Explanation:
The answer is 9.03 × 10²⁴ molecules.
Avogadro's number is the number of units (atoms, molecules) in 1 mole of substance.
Make the proportion.
6.02 × 10²³ molecules per 1 mol
x per 15 mol
6.02 × 10²³ molecules : 1 mol = x : 15 mol
x = 6.02 × 10²³ molecules * 15 mol * 1 mol
x = 90.3 × 10²³ molecules
x = 9.03 × 10 × 10²³ molecules
x = 9.03 × 10²³⁺¹ molecules
x = 9.03 × 10²⁴ molecules
I WILL MARK BRAINLY WHOLE SLIDE
2C2H2 + 5O2 → 4CO2 + 2H2O
Which of the following statements would be correct if one mole of C2H2 was used in this reaction? (5 points)
a
One mole of oxygen was used in this reaction.
b
Five moles of oxygen were used in this reaction.
c
Four moles of carbon dioxide were produced from this reaction.
d
Two moles of carbon dioxide were produced from this reaction.
Answer:
d. Two moles of carbon dioxide were produced from this reaction
Explanation:
The given chemical reaction can be written as follows;
2C₂H₂ + 5O₂ → 4CO₂ + 2H₂O
From the above chemical reaction, we have;
Two moles of C₂H₂ reacts with five moles of O₂ to produce four moles of CO₂ and two moles of H₂O
We have;
One mole of C₂H₂ will react with two and half moles of O₂ to produce two moles of CO₂ and one mole of H₂O
Therefore, in the above reaction, when one mole of C₂H₂ is used, two moles of CO₂ will be produced.
At 289 K, a sample of gas has a volume of 42.0 cm3. What volume does the gas occupy at 342 K? (12.5 Points)
Answer: [tex]49.7\ cm^3[/tex]
Explanation:
Given
At temperature [tex]T_1=289\ K[/tex]
Volume is [tex]V_1=42\ cm^3[/tex]
and the temperature changes to [tex]T_2=342\ K[/tex]
At this temperature volume is [tex]V_2[/tex]
Consider Pressure remains the constant
[tex]\therefore \dfrac{V_1}{T_1}=\dfrac{V_2}{T_2}\\\\\Rightarrow V_2=V_1\times \dfrac{T_2}{T_1}\\\\\text{Insert values}\\\\\Rightarrow V_2=42\times \dfrac{342}{289}\\\\\Rightarrow V_2=49.7\ cm^3[/tex]
The volume at this temperature is [tex]49.7\ cm^3[/tex]
Mendel crossed tall pea plants with short pea plants. the offspring were all tall plants.
1. Which allele is recessive?
2. Which allele is dominant?

please hurry

Answer:
1. Allele for shortness (t)
2. Allele for tallness (T)
Explanation:
Gregor Mendel performed numerous experiments using pea plants (Pisium sativum). He tested the height traits of pea plants by crossing tall pea plants (TT) and short pea plants (tt) to obtain offsprings that were all tall (Tt) in the first filial generation (F1).
This is possible because the allele for tallness is DOMINANT while the allele for shortness is RECESSIVE. This means that tallness allele (T) will mask the phenotypic expression of shortness allele (t) when in an heterozygous state (Tt) as in the F1 generation.