hydrochloric acid is sold as a concentrated aqueous solution if the molarity of concentrated hcl is 12.0m and the desnity is 1.18g/ml what is the molality of this acid

ΔHrxn and ΔHf are measured by heat transfer in experiments. ΔHrxn measures enthalpy change per mole of a reaction, while ΔHf measures heat released when one mole of a compound forms from its elements in standard states. Experimentally, ΔHrxn measures change in enthalpy per mole of a reaction and ΔHf measures standard molar enthalpy of formation.

ΔHrxn is the change in enthalpy of a chemical reaction, which is measured at constant pressure and can be either endothermic (positive ΔHrxn) or exothermic (negative ΔHrxn).

ΔHf, on the other hand, is the standard molar enthalpy of formation, which is the enthalpy change that occurs when one mole of a compound is formed from its constituent elements in their standard states (most stable form at standard temperature and pressure).

In an experiment to measure ΔHrxn, the enthalpies of the reactants and products are measured directly and the difference is calculated. This can be done using calorimetry, where the heat transfer of the reaction is measured using a calorimeter. In an experiment to measure ΔHf, the enthalpy of a single reaction is measured and the number of moles of reactants used is known.

The part of the experiment that demonstrates the change in enthalpy per mole of a reaction would be the part where the enthalpy change is measured directly, which is used to calculate ΔHrxn. The part of the experiment that demonstrates the standard molar enthalpy of formation for a reaction would be the part where the number of moles of reactants used is known and the initial and final masses of the reactants and products are measured, which is used to calculate ΔHf.

To know more about enthalpy, here

brainly.com/question/13996238

#SPJ4

--The complete question is, What is the difference between ΔHrxn and ΔHf, and how are they measured experimentally? In an experiment to measure the enthalpy change of a reaction and the standard molar enthalpy of formation, which parts of the experiment would demonstrate each of these quantities?--

The number of moles of caffeine is 0.00052 mol

To calculate the number of moles of caffeine in a 100 mg sample, we need to use the formula:

The molar mass of caffeine (C₈H₁₀O₂N₄) is 194.19 g/mol. Converting the mass of the sample to grams (100 mg = 0.1 g), we can plug in the values and solve for moles:

The mole is widely used in stoichiometry calculations, which involve determining the amount of reactants needed to produce a certain amount of products or the amount of products produced from a certain amount of reactants. It is also used in the calculation of molar mass, which is the mass of one mole of a substance, and in the conversion between mass, moles, and number of entities in chemical reactions. Therefore, the number of moles of caffeine in a 100 mg sample of caffeine is 0.00052 moles.

To learn more about moles, here

https://brainly.com/question/26416088

#SPJ4

PEL levels for a particular substance, such as Antimony, may vary depending on the country, jurisdiction, and specific industry or work environment.

"PEL" stands for "Permissible Exposure Limit," which is a term used in occupational health and safety regulations to denote the maximum amount or concentration of a hazardous substance that a worker may be exposed to over a specified time period without adverse health effects.

Therefore, it is important to refer to the relevant occupational health and safety regulations or guidelines in your specific area or industry for accurate and up-to-date information on the PEL levels for Antimony or any other hazardous substance.

These regulations are typically established by government agencies, such as the Occupational Safety and Health Administration (OSHA) in the United States or the Health and Safety Executive (HSE) in the United Kingdom.

Learn more about PEL levels here: https://brainly.com/question/5428869

#SPJ1

As ice melts, the water molecules group go from a well-ordered phase to a less-ordered phase. The correct answer is "go from a well-ordered phase to a less-ordered phase.

As ice melts, the water molecules go from a well-ordered phase to a less-ordered phase. In ice, the water molecules are arranged in a specific pattern, which gives it a solid, crystalline structure.

However, as the temperature increases and the ice begins to melt, the water molecules gain energy and start to move around more freely, breaking the rigid pattern.

This results in a less-ordered phase where the water molecules are no longer held in a fixed position. " None of the other answer choices accurately describe what happens to the water molecules as ice melts.

To learn more about : well-ordered

https://brainly.com/question/2990207

#SPJ11

The number of moles of the gas is about 1.37 moles.

The ideal gas equation relates the pressure, volume, temperature, and number of moles of an ideal gas in a closed system. The gas constant (R) is a proportionality constant that relates these four variables.

It is important to note that the ideal gas equation is only applicable to ideal gases, which are hypothetical gases that obey certain assumptions such as having no intermolecular forces and occupying no volume. Real gases deviate from these ideal behaviors under certain conditions, and thus the ideal gas equation may not accurately describe their behavior.

Knowing that;

PV = nRT

n = PV/RT

n = 1.35 * 25/0.082 * 300

n = 33.75/24.6

n = 1.37 moles

Learn more about ideal gas equation:https://brainly.com/question/28837405

#SPJ1

Mercury has the widest variation in surface temperatures between night and day of any planet in the solar system.

This statement is true. Mercury experiences the greatest temperature variation between night and day due to several factors. The main reasons are its proximity to the Sun, slow rotation, and lack of atmosphere.

During the daytime, temperatures on Mercury can reach up to 800°F (430°C) due to its close proximity to the Sun. This extreme temperature difference is due to the fact that Mercury's thin atmosphere is unable to regulate temperature and its slow rotation causes one side of the planet to be constantly facing the sun while the other is in perpetual darkness.

At night, temperatures can drop as low as -290°F (-180°C) because of its slow rotation and the lack of an atmosphere to retain heat. This results in the widest variation in surface temperatures between night and day of any planet in our solar system.

To know more about Mercury Variations in surface temperature:

https://brainly.com/question/16117265

#SPJ11

Mercury indeed has the widest variation in surface temperatures between night and day of any planet in the solar system. This is primarily due to its thin atmosphere, which cannot effectively retain heat, leading to extreme temperature fluctuations.

Mercury, being the closest planet to the sun, experiences extreme variations in temperature between its day and night sides. During the day, when the sun is overhead, the surface temperature on Mercury can rise to a scorching 430°C (800°F), which is hot enough to melt lead. However, as Mercury rotates and the sun sets, the temperature drops drastically to as low as -180°C (-290°F) at night.

The main reason for this extreme temperature variation is that Mercury has no atmosphere to regulate its surface temperature. Unlike Earth, which has an atmosphere that helps to distribute heat around the planet, Mercury's surface is directly exposed to the sun's radiation. This means that when the sun is shining on Mercury's surface, it heats up quickly and intensely, causing the temperature to rise to extreme levels.

Overall, the lack of an atmosphere and Mercury's proximity to the sun are the main factors contributing to the extreme temperature variations on the planet.

Learn more about atmosphere here:

https://brainly.com/question/11192430

#SPJ11

True. Absorbance values above 1.00 indicate that the sample is heavily concentrated with solutes, which can limit the amount of light that passes through the sample.

Dilution is necessary to reduce the concentration of solutes in the sample and allow more light to pass through, enabling accurate measurement of the absorbance values.

Dilution involves adding a solvent to the sample to decrease its concentration while maintaining the same proportion of solutes. The diluted sample can then be re-analyzed to obtain absorbance values within the linear range of the spectrophotometer.

It is important to note that proper dilution factors must be calculated and applied accurately to avoid errors in the final results. Dilution is a commonly used technique in many scientific fields, including biochemistry, molecular biology, and environmental science.

To learn more about : solutes

https://brainly.com/question/25326161

#SPJ11

9 pennies contain approximately [tex]2.13 x 10^23[/tex] atoms of copper.

To solve this problem, we need to use the following steps:

Determine the molar mass of copper.

Convert the mass of 9 pennies from grams to moles.

Use Avogadro's number to calculate the number of atoms of copper.

Step 1: The molar mass of copper (Cu) is approximately 63.55 g/mol.

Step 2: The mass of 9 pennies is:

9 pennies x 2.5 g/penny = 22.5 g

Converting this mass to moles, we get:

22.5 g / 63.55 g/mol = 0.354 moles

Step 3: Using Avogadro's number ([tex]6.022 x 10^23 atoms/mol)[/tex], we can calculate the number of atoms of copper:

Therefore, 9 pennies contain approximately[tex]2.13 x 10^23 a[/tex]toms of copper.

Learn more about molar mass

https://brainly.com/question/22997914

#SPJ4

the molar mass of the unknown acid is approximately 141.1 g/mol.

a. To find the number of moles of acid in the solid sample, we first need to calculate the number of moles of NaOH used in the titration. We can do this using the equation:

moles NaOH = M NaOH x V NaO

where M NaOH is the molarity of the NaOH solution, and V NaOH is the volume of NaOH solution used at the equivalence point.

Substituting the given values, we get

moles NaOH = 0.300 mol/L x 0.04873 L = 0.014619 mol

Since NaOH and the unknown acid react in a 1:1 mole ratio, the number of moles of acid in the sample is also 0.014619 mol.

b. To find the molar mass of the unknown acid, we can use the equation

molar mass = mass of sample / number of moles of acid

Substituting the given values, we get:

molar mass = 2.06 g / 0.014619 mol = 141.1 g/mol

Learn more about molar  here:

https://brainly.com/question/8732513

#SPJ11

The number of moles in the acid is 0.014619 moles and the molar mass of the unknown monoprotic acid is 140.92 g/mol.

To find the number of moles of acid in the solid sample, first determine the moles of NaOH used in the titration. You can do this using the formula:

moles = volume (L) × concentration (M)
moles of NaOH = 48.73 mL × (1 L / 1000 mL) × 0.300 M = 0.014619 moles

Since it's a monoprotic acid, the moles of the acid are equal to the moles of NaOH at the equivalence point:
moles of acid = 0.014619 moles

b. To find the molar mass of the unknown acid, use the formula:

molar mass = mass of the sample (g) / moles of the acid
molar mass = 2.06 g / 0.014619 moles = 140.92 g/mol

So, the molar mass of the unknown monoprotic acid is approximately 140.92 g/mol.

To know more about Molar Mass:

https://brainly.com/question/29509963

#SPJ11

1. To construct 1 complete race car, you need:

3 bodies (B)

3 cylinders (Cy)

4 engines (E)

2 tires (Tr)

2.To construct 3 complete race cars, you need:

3 x 3 = 9 bodies (B)

3 x 3 = 9 cylinders (Cy)

3 x 4 = 12 engines (E)

3 x 2 = 6 tires (Tr)

3a.

Assuming that you have 15 cylinders and an unlimited supply of the remaining parts, we can make 5 cars.

3b.

In order to make 5 complete race cars, you would need:

5 x 3 = 15 bodies (B)

5 x 4 = 20 engines (E)

5 x 2 = 10 tires (Tr)

a. The number of complete race cars that can be made is limited by the number of cylinders available, as each car requires 3 cylinders.

The maximum number of complete race cars that can be made is therefore 15 / 3 = 5.

In order to make 5 complete race cars, you would need:

5 x 3 = 15 bodies (B)

5 x 4 = 20 engines (E)

5 x 2 = 10 tires (Tr)

Notably, all 15 cylinders would be used up in creating the 5 finished race cars, and each car required 4 engines but only 3 cylinders, thus neither more cylinders nor engines would be needed.

Learn more about   race cars  at:

https://brainly.com/question/29578742

#SPJ1

The key special chemical used by chemosynthetic communities at salt seeps is hydrogen sulfide (H2S).

Chemosynthetic communities are biological communities that are supported by chemical energy rather than sunlight. These communities are found in environments such as deep-sea hydrothermal vents, cold seeps, and salt seeps, where there is no sunlight available for photosynthesis. Instead, chemosynthetic organisms use chemical energy to produce organic matter.

In the case of salt seeps, the key chemical used by chemosynthetic communities is hydrogen sulfide (H2S). Hydrogen sulfide is produced by the decomposition of organic matter in the sediments, and it diffuses up into the overlying seawater. Chemosynthetic bacteria, such as sulfur-oxidizing bacteria, use hydrogen sulfide as their energy source in a process called chemosynthesis.

During chemosynthesis, bacteria use the energy from the oxidation of hydrogen sulfide to convert carbon dioxide and water into organic matter. This organic matter serves as the basis of the food chain for other organisms in the community, such as tube worms, clams, and mussels. These organisms in turn provide food for larger animals such as fish, crabs, and sea stars.

The chemosynthetic process is similar to photosynthesis in that both processes produce organic matter. However, photosynthesis uses light energy to power the process, while chemosynthesis uses chemical energy. Chemosynthetic communities are important in deep-sea ecosystems, as they provide the foundation for the food chain in environments where sunlight is not available.

VisitVisit to know more about Chemical:-

brainly.com/question/5650115

#SPJ11

According to the article published by J.D. Bauer et. al in 2010, the solvent used to grow the crystals of acetylsalicylic acid was ethanol.

The process of crystal growth involves dissolving the compound in a suitable solvent and then allowing it to slowly evaporate under controlled conditions to form well-defined crystals. Ethanol is a commonly used solvent for the growth of crystals due to its ability to dissolve a wide range of compounds, including organic molecules like acetylsalicylic acid.

The use of ethanol as a solvent for crystal growth of acetylsalicylic acid was carefully chosen to ensure that the crystals formed were of high quality and had a well-defined crystal structure. The crystal structure of acetylsalicylic acid is important because it determines the physical and chemical properties of the compound.

In conclusion, the use of ethanol as a solvent for the growth of acetylsalicylic acid crystals was a crucial step in the determination of the crystal structure of this important compound. The choice of solvent is an important factor to consider when growing crystals, as it can greatly affect the quality and properties of the crystals formed.

Know more about   ethanol   here:

https://brainly.com/question/281073

#SPJ11

This is an exothermic reaction because energy is released during the reaction process as 108 kJ of energy are evolved when 1 mole reacts to form product.

When 1 mole reacts to form product according to the given equation, 108 kJ of energy are evolved, which means that energy is being released by the reaction. This release of energy indicates an exothermic reaction as exothermic reaction is a chemical reaction that involves the release of energy.

Learn more about exothermic reaction here:

https://brainly.com/question/13014923

#SPJ11

Based on the fact that energy is being evolved, this reaction is exothermic.

This reaction is exothermic because energy is released (or "evolved") during the reaction. In exothermic reactions, energy is given off as the reactants transform into products, while in endothermic reactions, energy is absorbed from the surroundings. Since 108 kJ of energy is evolved in this case, it confirms that the reaction is exothermic.

To know more about Exothermic Reactions:

https://brainly.com/question/14079389

#SPJ11

Based on the information provided, you should choose a 20 ml syringe for compounding the sterile order for chlorothiazide, as it will allow you to withdraw the exact calculated amount needed.

You should pick a 30 ml syringe to withdraw 20 ml of chlorothiazide. This will allow you to withdraw the medication with enough room in the syringe to prevent any spills or contamination. It is always important to choose a syringe size that is larger than the volume you need to withdraw to ensure accuracy and safety in compounding sterile orders.
Based on the information provided, you should choose a 20 ml syringe for compounding the sterile order for chlorothiazide, as it will allow you to withdraw the exact calculated amount needed.

Visit here to learn more about   chlorothiazide: https://brainly.com/question/13254931
#SPJ11

Answer:

They're equal.

Explanation:

Giving an idea let's use the question:

This would depend on the temperature and pressure conditions that the helium gas is being stored under.

You see, gases have no fixed volume. They will expand when the temperature increases and/or the applied pressure decreases. On the other hand, the gas will contract when cooled or pressure is applied. So one mole of helium could occupy almost any volume, depending on how much you compress it or how cool you keep it.

However, if your helium gas is stored under standard temperature and pressure conditions (STP)(0 C and 101.3 kPa), then it would fill a box with a volume of 22.4 L. This volume is known as the standard molar volume and is the same for any gas at STP.

I will let you come up with a set of dimensions for a box that could satisfy this volume.

The spectrum from an incandescent light bulb with a filament is a continuous spectrum. This means that the light emitted contains all colors of the visible spectrum, appearing as a smooth, uninterrupted rainbow

Electrons in an atom can only gain energy by leaving the atom and creating an ion. They can move between discrete energy levels or escape the atom if given enough energy. Electrons can have any energy below the ionization energy within the atom or escape if given enough energy.

However, electrons can have any energy within the atom and cannot be given enough energy to cause them to escape the atom. They move between discrete energy levels within the atom and cannot accept an amount of energy that causes them to escape the atom.

In contrast, an emission line spectrum appears as a series of bright lines against a dark background, while an absorption line spectrum appears as a series of dark lines against a bright background.

The type of spectrum emitted depends on the source of the light and the composition of the material emitting the light.

To learn more about : spectrum

https://brainly.com/question/2187993

#SPJ11

The pressure would be 28.75 atm if the volume is changed from 5 L to 1 L, starting from an initial pressure of 5.75 atm.

To solve this problem, we can use the combined gas law equation, which relates the pressure, volume, and temperature of a gas:

P1V1/T1 = P2V2/T2

where P1 and V1 are the initial pressure and volume, T1 is the initial temperature, P2 and V2 are the final pressure and volume, and T2 is the final temperature. Since the temperature is constant in this problem, we can simplify the equation to:

P1V1 = P2V2

Substituting the given values, we get:

5.75 atm × 5 L = P2 × 1 L

Solving for P2, we get:

P2 = (5.75 atm × 5 L) / 1 L = 28.75 atm.

For such more questions on Pressure:

https://brainly.com/question/24719118

#SPJ11

The new pressure of the helium gas in the 2.00 L container is 0.494 atm.

What is new pressure?

According to Boyle's Law, for a fixed amount of gas at a constant temperature, the pressure and volume of the gas are inversely proportional to each other.

Using Boyle's Law, we can write:

P1V1 = P2V2

where P1 and V1 are the initial pressure and volume of the gas, and P2 and V2 are the new pressure and volume of the gas, respectively.

Given that the initial pressure P1 is 0.988 atm and the initial volume V1 is 1.00 L, and the new volume V2 is 2.00 L, we can solve for the new pressure P2 as follows:

P1V1 = P2V2

0.988 atm × 1.00 L = P2 × 2.00 L

P2 = (0.988 atm × 1.00 L) / 2.00 L

P2 = 0.494 atm

Therefore, the new pressure of the helium gas in the 2.00 L container is 0.494 atm.

What is volume of the gas?

The volume of a gas refers to the amount of space that the gas occupies. The volume of a gas can be measured in a number of ways, depending on the conditions under which the gas is being measured.

At standard temperature and pressure (STP), which is defined as 0°C (273.15 K) and 1 atmosphere (atm) of pressure, the volume of 1 mole of any gas is 22.4 liters (L). This is known as the molar volume of a gas at STP.

The volume of a gas can vary depending on the temperature, pressure, and the amount of gas present. As a general rule, the volume of a gas will increase as the temperature increases and/or the pressure decreases, and will decrease as the temperature decreases and/or the pressure increases.

To know more about pressure, visit:

https://brainly.com/question/28988906

#SPJ1

Answer:

produced continually by the impact of meteors falling onto its surface.

Explanation:

The molar concentration of Al(OH)₃ in the solution is 1.61 M.

we need to calculate the number of moles of Al(OH)3 in the solution:

Number of moles of Al(OH)₃ = mass of Al(OH)3 / molar mass of Al(OH)3

Molar mass of Al(OH)₃ = (1 x atomic mass of Al) + (3 x atomic mass of O) + (3 x atomic mass of H)

Molar mass of Al(OH)₃ = (1 x 26.98 g/mol) + (3 x 16.00 g/mol) + (3 x 1.01 g/mol) = 78.00 g/mol

Number of moles of Al(OH)₃ = 62.7 g / 78.00 g/mol = 0.804 moles

Next, we need to calculate the volume of the solution in liters:

Volume of solution = 500.0 mL = 500.0 mL x (1 L/1000 mL) = 0.500 L

Finally, we can calculate the molar concentration of Al(OH)₃

Molarity = moles of solute/volume of solution in liters

Molarity = 0.804 moles / 0.500 L = 1.61 M

Therefore, the molar concentration of Al(OH)₃ in the solution is 1.61 M.

learn more about Molar Mass here

https://brainly.com/question/837939

#SPJ1

After being exposed to organophosphate insecticide, Decontamination should begin with : C. Place the patient in a well-ventilated, isolated area.

What should be done after being exposed to organophosphate insecticide:

For the safety of other patients and staff members, place the patient in a well-ventilated and isolated area for decontamination. After donning personal protective equipment,  gloves and goggles, carefully remove  patient's clothing. Then brush off the insecticide, if it was of a dry type.

Decontaminate patient with copious amount of water. Do not apply any neutralizing agent because it may cause exothermic reaction that produces heat.

To know more about Organophosphate insecticide:

brainly.com/question/28547821

#SPJ4

Complete question:

After being exposed to an organophosphate insecticide, a landscaping worker presents to the emergency department. Decontamination should begin with which step?

A. Brush the insecticide off the patient.

B. Remove the patient's clothing.

C. Place the patient is a well-ventilated, isolated area.

D. Apply a neutralizing agent.

Kinetic molecular theory says that as water molecules absorb energy, their motion and temperature increase and the sample becomes warm

The average kinetic energy of the molecules will rise as the temperature rises, according to the kinetic molecular theory. The edge of the container will probably be more frequently struck by the particles as they travel more quickly.

The average molecular velocity of a gas increases as its temperature rises; for example, doubling the temperature will result in a four-fold increase in molecular velocity. More momentum and kinetic energy will be transferred to the container's walls in collisions with them.

learn more about kinetic molecular theory

https://brainly.com/question/134712

#SPJ1

the number of moles of solvent divided by the number of liters of solution.

The mole idea enables us to weigh macroscopically small quantities of matter and count molecules and atoms because they are so minuscule. To calculate the stoichiometry of reactions, a standard is established. A description of the characteristics of gases is given in paragraph three.

A 1 molar (1M) liquid is defined as a substance that has been dissolved in 1 mole of liquid (i.e., 1mol/L), while a 0.5 molecule (0.5M) solution is defined as a substance that has been dissolved in 2 mol/L of liquid.

To know more about moles visit:

https://brainly.com/question/26416088

#SPJ1

23 grams of water at 95°C can lose a maximum of 8883.64 Joules of heat before freezing completely.

To answer your question, we need to calculate the heat loss required to lower the temperature of 23 grams of water from 95 degrees Celsius to 0 degrees Celsius, which is the freezing point of water. The specific heat capacity of water is 4.184 Joules per gram per degree Celsius.

So, the initial energy of the water is:

E1 = m x c x ΔT
E1 = 23 g x 4.184 J/g°C x (95°C - 0°C)
E1 = 8883.64 J

Where E1 is the initial energy of the water, m is the mass of water, c is the specific heat capacity of water, and ΔT is the change in temperature.

The final energy of the water at 0°C is:

E2 = m x c x ΔT
E2 = 23 g x 4.184 J/g°C x (0°C - 0°C)
E2 = 0 J

So, the maximum amount of heat in joules that 23 grams of water at 95°C can lose before freezing completely is:

ΔE = E1 - E2
ΔE = 8883.64 J - 0 J
ΔE = 8883.64 J

Learn more about joules here: brainly.com/question/25982371

#SPJ11

The Ka for this acid is 2.37 x 10⁻⁴.

To solve this problem, we can use the relationship between pH and Ka for a weak acid:

From the given pH, we can calculate the [H⁺] concentration:

We can assume that all of the acid dissociates in water, so [HA] = 1.28 M. Therefore:

Therefore, the Ka value for the monoprotic acid is 2.37 x 10⁻⁴.

A monoprotic acid is an acid that can donate only one proton or hydrogen ion (H⁺) per molecule in an aqueous solution. Examples of monoprotic acids include hydrochloric acid (HCl), nitric acid (HNO₃), acetic acid (CH₃COOH), and formic acid (HCOOH).

When dissolved in water, these acids dissociate to produce one hydrogen ion (H⁺) and one negative ion, such as chloride (Cl⁻) for HCl, nitrate (NO₃⁻) for HNO₃, acetate (CH₃COO⁻) for CH₃COOH, and formate (HCOO⁻) for HCOOH. Monoprotic acids are often used in chemistry and biology experiments, as they are easier to handle and analyze than polyprotic acids, which can donate multiple protons.

To learn more about monoprotic acid, here

https://brainly.com/question/22497931

#SPJ4

The number of the molecules present in 16.8 L gas 'X' at S.T.P is given by the term of 4.52×10²³ molecules.

To acquire the needed number of molecules, first calculate the substance's molecular weight in units of one mole. Next, divide the molar mass value by the molecular mass, and multiply the resulting number by the Avogadro constant.

The link between the number of moles and Avogadro's number, which is given by; may be used to calculate the number of molecules.

Avogadro's constant (1 mole) (NA)

Once the number of moles has been established, the number of molecules will equal the sum of the number of moles and Avogadro's number.

The number of molecules in 22.4 L of gas (X) = 6.02 x 10²³

Thus, the number of molecules in 16.8 L of gas (X) = 6.02 x 10²³ x 16.8/22.4

= 4.52×10²³ molecules.

Learn more about Number of molecules:

https://brainly.com/question/30193523

#SPJ4

Complete question:

Calculate the number of molecules present in 16.8 L gas 'X' at S.T.P.

There are approximately 3.92 x 10^23 molecules of xenon gas in 16.8 L at STP.

To answer this question, we need to use the Ideal Gas Law equation: PV=nRT. At STP (Standard Temperature and Pressure), the temperature is 273 K and the pressure is 1 atm. The molar volume of a gas at STP is 22.4 L/mol.

First, we need to find the number of moles of xenon gas in 16.8 L:

V = 16.8 L
n = PV/RT = (1 atm)(16.8 L)/(0.0821 L•atm/mol•K)(273 K) = 0.652 mol

Now, we can use Avogadro's number (6.022 x 10^23 molecules/mol) to find the number of molecules:

Number of molecules = (0.652 mol)(6.022 x 10^23 molecules/mol) = 3.92 x 10^23 molecules

To find the number of molecules in 16.8 L of xenon gas at STP, you'll need to use the Ideal Gas Law and Avogadro's number.

At STP (standard temperature and pressure), 1 mole of any gas occupies 22.4 L. First, determine the number of moles of xenon:

moles of xenon = (16.8 L) / (22.4 L/mol) = 0.75 mol

Next, use Avogadro's number (6.022 x 10^23 molecules/mol) to find the number of molecules:

molecules of xenon = (0.75 mol) x (6.022 x 10^23 molecules/mol) ≈ 4.52 x 10^23 molecules

So, there are approximately 4.52 x 10^23 molecules in 16.8 L of xenon gas at STP.

To learn more about Ideal Gas Law equation click here

brainly.com/question/4147359

#SPJ11

The enthalpy of the reaction as seen from the calculations is - 137.2 kJ/mol.

To determine the enthalpy change of a reaction, we need to know the difference between the enthalpy of the products and the enthalpy of the reactants. This difference is known as the enthalpy change or the heat of reaction.

The enthalpy change of a reaction can be calculated using the following formula:

ΔH = ΣnΔHf(products) - ΣmΔHf(reactants)

where ΔH is the enthalpy change of the reaction, n and m are the stoichiometric coefficients of the products and reactants, respectively, and ΔHf is the standard enthalpy of formation of the species.

Enthalpy of reaction = Enthalpy of products - Enthalpy of reactants

(-84.7) -(52.5 + 0)

- 137.2 kJ/mol

Learn more about enthalpy change:https://brainly.com/question/29556033

#SPJ1