H.w. balance the following equations:
a) Iron + chlorine → Iron (iii) chloride
b) Nitrogen + hydrogen → Ammonia
c) Phosphoric acid + sodium carbonate → sodium phosphate + water + carbon dioxide
d) Nitrogen dioxide + water + oxygen → Nitric acid

Answer:

a

Explanation:

sugar is composed of different elements combined in a manner form

Answer:

symbiotic

Explanation:

There like a close friendship

Answer:

Ionic Substance is....

Explanation:

In chemistry, an ionic compound is a chemical compound composed of ions held together by electrostatic forces termed ionic bonding. The compound is neutral overall, but consists of positively charged ions called cations and negatively charged ions called anions.

Answer:

1 qualiative physical  

2 qualiative   chemical

3 quantitative physcial

4 quantiative chemical

5qualiative   physcial

6quatiative    chemcial

7quanatiative physcial

8 qualiative   chemical

9quatliate  physcial

Answer: The vapor pressure of a solution in which the mole fraction of the solute is 0.200 is 80.0 torr

Explanation:

As the relative lowering of vapor pressure is directly proportional to the amount of dissolved solute.

The formula for relative lowering of vapor pressure will be,

[tex]\frac{p^o-p_s}{p^o}=i\times x_2[/tex]

where,

[tex]p^0[/tex]= vapor pressure of pure solvent = 100.0 torr

[tex]p_s[/tex] = vapor pressure of solution = ?

i = Van'T Hoff factor = 1 for nonvolatile, nonelectrolyte solute

[tex]x_2[/tex] = mole fraction of solute  = 0.200  

[tex]\frac{100.0-p_s}{100.0}=1\times 0.200[/tex]

[tex]p_s=80.0torr[/tex]

The vapor pressure of a solution in which the mole fraction of the solute is 0.200 is 80.0 torr

Answer:

37.7 atm

Explanation:

Using the relation;

(P + an^2/V^2) (V - nb) = nRT

(P + an^2/V^2) = nRT/(V - nb)

a = 0.0341 atm dm^2 Mol^2

b = 0.0237 dm/mol

P = nRT/(V - nb) - an^2/V^2

P = [4.3 * 0.082 * 325 / (3.6 - (4.3 * 0.0237))] - (0.0341 * (4.3^2))/(3.6^2)

P = 114.595/(3.498) - 0.0487

P = 37.7 atm

Answer:

65.0cp

Explanation:

Answer:

1.8 J/g·°C (2 sig.figs. per ΔT)

Explanation:

Given:

mass (m) = 78.9 grams

specific heat (c) = ?

Temp. Change (ΔT) = 109°C - 18°C = 91°C

Heat flow (q) = 13,240 Joules

q = m·c·ΔT => c = q/m·ΔT

∴c = 13,240J / 78.9g·91°C = 1.844 J/g·°C ≅ 1.8 J/g·°C (2 sig.figs. per ΔT)

Answer:

No pain, no gain is a proverb that means in order to make progress or to be successful, one must suffer. This suffering may be in a physical or mental sense. The phrase no pain, no gain was popularized in the 1980s by the American actress, Jane Fonda.

Answer:

mH₂O = 6.4116 g

Explanation:

Let's write the given reaction:

2H₂ + O₂ -------> 2H₂O

The problem states that 5.7 g of oxygen reacts with excess hydrogen, hence, the limiting reagent is the oxygen. With this mass of oxygen, we can determine the moles, and then, the moles of water with the mole ratio:

moles = mass / atomic weight        AW of O₂ = 16 g/mol

Replacing we have:

moles O₂ = 5.70 / (16 * 2)

moles O₂ = 0.1781 moles

According to the balanced reaction, 1 mole of Oxygen produces 2 moles of water, so we have a mole ratio 1:2, therefore the moles of water would be twice the moles of oxygen:

moles H₂O = 0.1781 * 2 = 0.3562 moles

Finally the mass of water can be calculated solving for the mass from the expression of moles, and using molecular mass of water:

m = moles * MM          MM H₂O = 18 g/mol

m = 0.3562 * 18

Hope this helps

Answer:

H^+(aq) + OH^-(aq) --------> H2O(l)

Explanation:

We must first obtain the molecular equation, the net ionic equation before we obtain the net ionic equation.

The molecular reaction equation is;

HF(aq) + NaOH(aq) -------> H2O(l) + NaF(aq)

The complete ionic equation is;

H^+(aq) + F^-(aq) + Na^+(aq) + OH^-(aq) --------> H2O(l) + Na^+(aq) + F^-(aq)

The net ionic equation is;

H^+(aq) + OH^-(aq) --------> H2O(l)

Answer: The empirical formula is [tex]C_{17}H_{19}O_3N[/tex]

Explanation:

Mass of C= 17.900 g

Mass of H = 1.680 g

Mass of O = 4.225 g

Mass of N = 1.228 g

Step 1 : convert given masses into moles.

Moles of C =[tex]\frac{\text{ given mass of C}}{\text{ molar mass of C}}= \frac{17.990g}{12g/mole}=1.5moles[/tex]

Moles of H =[tex]\frac{\text{ given mass of H}}{\text{ molar mass of H}}= \frac{1.680g}{1g/mole}=1.680moles[/tex]

Moles of O =[tex]\frac{\text{ given mass of O}}{\text{ molar mass of O}}= \frac{4.225g}{16g/mole}=0.264moles[/tex]

Moles of N =[tex]\frac{\text{ given mass of N}}{\text{ molar mass of N}}= \frac{1.228g}{14g/mole}=0.087moles[/tex]

Step 2 : For the mole ratio, divide each value of moles by the smallest number of moles calculated.

For C = [tex]\frac{1.5}{0.087}=17[/tex]

For H = [tex]\frac{1.680}{0.087}=19[/tex]

For O =[tex]\frac{0.264}{0.087}=3[/tex]

For N = [tex]\frac{0.087}{0.087}=1[/tex]

The ratio of C : H: O: N = 17: 19: 3: 1

Hence the empirical formula is [tex]C_{17}H_{19}O_3N[/tex]

Answer: the electrostatic potential energy is -3.26 × 10⁻¹⁸ J

Explanation:

Given the data in the question;

I think the value of electrostatic potential energy of calcium sulfide CaS formed will be less(more negative) than KCl because the Ca2+ and S2- ions has more charge that is +2 and -2 respectively when compared to Kcl which has +1 and -1 charge.so it will be more negative.

radius = r[tex]_{ca+2}[/tex] + r[tex]_{s-2}[/tex] = 100 + 184 = 284 pm = 2.84 × 10⁻¹⁰ m

we know that; k = 2.31 × 10⁻²⁸ J

q1 = 2  ( charge on Ca⁺² )

q2 = -2( charge on S⁻²)

so

Ep = k × q1q2/r

so we substitute

Ep = 2.31 × 10⁻²⁸ × (+2×-2) / 2.84 × 10⁻¹⁰

Ep = (2.31 × 10⁻²⁸ × -4) / 2.84 × 10⁻¹⁰

Ep = -9.24 × 10⁻²⁸ / 2.84 × 10⁻¹⁰

Ep = -3.26 × 10⁻¹⁸ J

Therefore, the electrostatic potential energy is -3.26 × 10⁻¹⁸ J

Based on the data provided, the electrostatic potential energy is -3.26 × 10⁻¹⁸ J

The electrostatic potential energy is the work done in moving the charge from infinity to that point against the electric field.

The electrostatic potential energy between any two charges q1, q2 separated by distance r is derived from Coulomb’s law and mathematically given as:

where

From the data provided:

ionic radii of Ca2+ r1 = 100 pm

ionic radii of S2– = 184 pm.

Chargeon Ca2+ = +2

Charge on S2_ = -2

From the data above, it most likely that the value of electrostatic potential energy of calcium sulfide CaS formed will be less(more negative) than KCl because the Ca2+ and S2- ions has a greater charge of +2 and -2 respectively compared to Kcl which has +1 and -1 charge.

Calculating the electrostatic potential energy, Ep:

radius = r1 + r2 = 100 + 184 = 284 pm

r = 2.84 × 10⁻¹⁰ m

k = 2.31 × 10⁻²⁸ J

q1 = 2  ( charge on Ca⁺² )

q2 = -2( charge on S⁻²)

Then:

Ep = k × q1q2/r

Substituting the values above in the equation:

Ep = 2.31 × 10⁻²⁸ × (+2 ×-2) / 2.84 × 10⁻¹⁰

Ep = (2.31 × 10⁻²⁸ × -4) / 2.84 × 10⁻¹⁰

Ep = -9.24 × 10⁻²⁸ / 2.84 × 10⁻¹⁰

Ep = -3.26 × 10⁻¹⁸ J

Therefore, the electrostatic potential energy is -3.26 × 10⁻¹⁸ J.

Learn more about electrostatic potential energy at: https://brainly.com/question/24648428

Answer:

Released

Explanation:

they convert into a form of energy that can be used by cells

Answer:

A. Eight

Explanation:

Although there are eight major endocrine glands scattered throughout the body, they are still considered to be one system because they have similar functions, similar mechanisms of influence, and many important interrelationships.

Answer: A chemical compound can be described as substance composed of atoms from more than one element held together by chemical bonds in a fixed stoichiometric proportion. A compound has different physical and chemical properties from its constituent elements.

For example : compound water is made up of H and O bonded together and it has different properties from O and H.

Thus, among the given options, the one coreectly describing a compound is

a) The atoms are bonded together, and the compound has different physical and chemical properties than the individual elements.

Answer:

true

Explanation:

Prophase is the first stage in mitosis, occurring after the conclusion of the G2 portion of interphase. During prophase, the parent cell chromosomes which were duplicated during S phase condense and become thousands of times more compact than they were during interphase.

Answer and Explanation:

It is not necessary to know the amount of salt in the aqua, because we know that the presence of salt in the water will increase its density.

In this case, salt increases the mass of the water, without increasing the volume of water. as the egg will not change in volume or water, we know that the density of the egg will be constant, while the change in the mass of the water with the addition of salt, will change the density of the water which will increase progressively until it becomes denser than the egg and, consequently, it will not let the egg sink.

they are impacted because people loose their home due to the wreckage that has happend and landscapes are ruined due to landslides

Answer:

Well the landscape is torn up, it goes through quite a bit of damage. the plants, animals, and water are all affected by it. when a earth quake hits it destroyes most everything, houses fall into the ground and are destroyed, people die. Earthquakes destry electrical wires and many other things

Explanation:

Sorry I did not answer it full, but you can look it up online.

Explanation:

1 mole = 6.02 x 10^23 atoms (Avogadro’s number)

Step 1) Determine how many grams of a substance are in the problem

Step 2) Find the amount of grams in 1 mole of the substance

3) Multiply step one by step two

Hello. You forgot and show the compounds. The compounds are in the attached image.

Answer:

I < II < III

Explanation:

The stability of the presented compounds must be analyzed, taking into account the free electrons to form arrangements between the atoms. In this case, the molecules of greater stability follow the concept of valence and are characterized as those that manage to reach a large number of elements that manage to obey the octet rule.

Answer:

Rate = k[NH₄OH]²

k = 6.17

Explanation:

We have concentrations of NH₄OH along with the given times. To determine the rate law of the reaction we need to determine first the order of reaction. This reaction can be order zero, first or second order. The expressions for each are the following:

Zero order:

k = [A₀] - [A] / t

First order:

k = 1/t * ln([A₀]/[A])

Second order:

k = (1/t) * (1/[A₀] - 1/[A])

And from here, the next part is easier. We just need to determine hat order is, calculating the value of k at two different times. If the value of k is constant, then we can say that the reaction is of that order.

Let's suppose its order zero (t = 1 and t = 2, [A₀] = 0.200 M):

k1 = 0.2 - 0.0895 / 1 = 0.1105

k2 = 0.2 - 0.577 / 2 = -0.1885

From this results we can conclude it's not zero order.

Let's suppose its order 1:

k1 = ln(0.2/0.0895) / 1 = 0.8041

k2 = ln(0.2/0.577) / 2 = 0.1733

It's not first order either, so we can conclude that this reaction is of 2nd order and the rate law would be:

Now that we know it's a second order reaction, we can determine the value of k using its expression:

k = (1/t) (1/[A] - 1/[A₀])

k = ln(1/0.0895 - 1/0.2) (1/1)

k = 6.17

And to confirm this value, let's calculate k for t = 2 s

k = (1/2) (1/0.0577 - 1/0.2)

The value is constant, so this is the true value of k.

Hope this helps

Answer:

Follows are the solution to this question:

Explanation:

Please find the complete solution in the attached file.

Answer:

feeding leftover or scraps to livestock

Explanation:

Because feeding leftover healthy food instead of leaving livestock to eat garbage is good for health of the animals and they give good quality of milk, eggs, meat, etc in return

Answer:

1700 mL / 84 mLs

Explanation:

Given that:

Volume of blood pumped per minute = 84 /mLs

Time it takes to circulate 1700 mL of blood :

Time taken = Volume of blood circulate / Rate

Hence, to circulate 1700 mL of blood :

Time taken = 1700 mL / 84 mLs

Answer:

A)3410K

B)5678.6 °F

Explanation:

✓ To convert Celcius to Kelvin expression below can be used

K= °C + 273

We were given T=3137 °C

= 3137 + 273= 3410K

✓To convert Celcius to Fahrenheit, expression below can be used

°F =(°C × 9/5) + 32

We were given T=3137 °C

°F= (3137 × 9/5) + 32

= 5646.6+32

=5678.6 °F

Answer:

True.

Explanation:

When the number of molecules, atoms or ions of any element is in the hundreds of millions, we can safely speak of concentrations and analyze a standard behavior, and can even specify the different dilutions used, if there are dilutions. This allows analyzes to be clearly understood by any individual. However, it is not possible to do this if the number of molecules, atoms and ions is very small.

Answer:

B. They bind to carrier proteins in order to be transported in the blood to

their target cells.

Explanation:

Steroid hormones are belongs to the class of chemical compound called steroid. Steroid hormones are majorly secreted by three glands - ovaries, testes and adrenal cortex.

Steroid hormones are released in the blood and are allowed to bind to the specific carrier proteins such as corticosteroid-binding globulin and albumin which helps them to carry to the target cells for the functioning.

The steroid hormone binds to receptor proteins in the target cell and not in the plasma membrane

Hence, the correct answer is "B. They bind to carrier proteins in order to be transported in the blood to  their target cells."

Answer:

630.95 grams of Na₂CO₃ would be needed to produce 1000g of NaHCO₃

Explanation:

The balanced reaction is:

Na₂CO₃ + CO₂+ H₂O → 2 NaHCO₃

By stoichiometry of the reaction (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amounts of each compound participate in the reaction:

Being the molar mass:

Then by stoichiometry the following quantities of mass participate in the reaction:

You can apply the following rule of three: if 106 grams of Na₂CO₃ are needed to produce 168 grams of NaHCO₃, how much mass of Na₂CO₃ is necessary to produce 1000 grams of NaHCO₃?

[tex]mass of Na_{2} CO_{3}=\frac{1000grams ofNaHCO_{3} *106gramsofNa_{2} CO_{3} }{168grams ofNaHCO_{3}}[/tex]

mass of Na₂CO₃= 630.95 grams

630.95 grams of Na₂CO₃ would be needed to produce 1000g of NaHCO₃