Answers
Sump heater
Explanation
Related Questions
# derive is a kind of which dependency
Answers
Type of dependency Keyword or Stereotype
Abstraction «abstraction», «derive», «refine», or «trace»
Binding «bind»
Realization «realize»
Substitution «substitute
180 kg/h of a liquid feed enters an extraction column with 98% paraffin oil and 2% ethyl alcohol at room temperature and pressure. Liquid absorbent is 100% water. Required recovery (extraction) of ethyl alcohol from paraffin oil is 97%. Given that paraffin oil and water are immiscible with each other and the extraction column operates in a counter current fashion. Assume isothermal and isobaric conditions and that only ethyl alcohol is absorbed. Equilibrium relation between mass fractions of ethyl alcohol in water and paraffin oil is given by Xwater = 1.7544 * Xparaffin oil (a) Find minimum amount of water required (Answer – 97.5 kg/hr) (b) If you have 1.5 times minimum water amount, how many equilibrium stages are required? (Answer ~ 6)
Answers
Air enters the combustor of a jet engine at Pressure=10 atm, T=1000R and M=0.2. Fuel is injected and burned with fuel-air ratio (by mass) of 0.06. The heat released during the combustion is 4.50000000 ft-lb per slug of fuel. Assuming one-dimensional frictionless flow with r=1.4 for the fuel-air mixture, calculate M2, p2 and T2 at the exit of combustor?
Answers
heat released during combustion is 4.5x108 ft-lb per slug of fuel. Assuming onedimensional
frictionless flow with γ = 1.4 for the fuel air mixture, calculate M2, p2, T2 at
the exit of the combustor. Hope this helps! Can I get brainly please? Plus safety first if you see any links don’t klick them please don’t.
(TCO 3) Below is the frequency response of the IIR realization of an analog band-pass filter. What type of filter is this?
Answers
Answer:
Hello the frequency response is missing attached below is the missing image
answer : Elliptic Filter
Explanation:
The filter with such frequency response that is an analog band-pass filter as well is called an Elliptic filter.
And this is because an Elliptic filter posses a constant ripple in the stop band and a unity gain is seen in the pass band
Switching to first order kinetics, enzymes are immobilized in 6 mm radius (R) beads. Beads are immersed in a solution containing substrate at a concentration (CAs) of 22 gmol/m3. The observed reaction rate (rA,obs) of the heterogeneous reaction is 4.3 x 10-6 gmol/sec. The first order rate constant (k1) is 0.24 /sec. Calculate the hypothetical rate, r*As of the reaction in this system.
Answers
In order to be a Mechanical Engineer, you need to:
1. Have a Bachelor's Degree
2. Have a Master's Degree
3. Have a Ph.D.
Answers
Answer:
3
Explanation:
it is compulsory to have a bachelor's degree
Iman wanted to find out at what temperature butter melts. She placed a cube of solid butter in a beaker. She put the beaker on a hot plate. She turned up the temperature dial one degree every two minutes. Then she recorded the temperature at which the butter started to melt.
Iman wanted to determine if her results were reliable. She decided to repeat the experiment. Which statement describes the main purpose of repeating the experiment?
to test a different substance
to see if the results are similar
to practice completing experiments
to determine if butter will melt twice
Answers
Answer:
Ans: To see if the results are similar
name the process by which mild steel can be converted into high carbon steel and explain it briefly ?
Answers
Answer:
please give me brainlist and follow
Explanation:
Mild steel can be converted into high carbons steel by which of the following heat treatment process? Explanation: Case hardening, also referred as carburizing increases carbon content of steel, thus, imparting hardness to steel.
If we want to create a single function for insertion and deletion in the linked list, Suggest any approach by which this task can be carried out. Just verbally explain how we can accomplish this, no need to write the code
Answers
Answer:
Explanation:
One approach to this would be to create the function with two parameters. One would be the element to be added or deleted while the other would be a char variable that would indicate the process to be completed (adding or deleting). This char can have a value of '+' or '-' accordingly. Then within the function, we would use an IF/Else statement to detect whether the char variable had a value of '+' or '-'. If the value was '+' we would execute the insertion process of the code but if the value was '-' we would only execute the deletion process of the code. Therefore, allowing both processes to be available within a single function.