Answer:
D is the answer
Explanation:
Facts about flooding
Answer:
No region is safe from flooding. All 50 states are subject to flash floods.[1]
Flash floods can bring walls of water from 10 to 20 feet high.[2]
A car can be taken away in as little as 2 feet of water.[3]
To stay safe during a flood, go to the highest ground of floor possible. If your skin comes in contact with flood water, make sure to wash it with soap and disinfected water because the contents are unknown.[4]
Flooding is caused by spring thawing (snow and frozen grounds melting in the spring), heavy rains, snow melt runoffs, flash floods, and mudflows.[5]
Floods are the most widespread natural disaster aside from wildfires. 90% of all U.S. natural disasters declared by the President involve some sort of flooding.[6]
In preparation for a flood, it is important to stock up on first aid items, non-perishable foods, 3 gallons of water per person for 3 days, battery operated radio for weather reports, extra batteries, personal hygiene necessities.[7]
Based on Floodsmart, a 2,000 square foot home undergoing 12” of water damage could cost more than $50,000.[8]
Since flood damage is almost never covered by homeowners insurance, flood insurance is important for people living in high-risk flood zones.[9]
To stay safe during a flood, go to the highest ground of floor possible. If your skin comes in contact with flood water, make sure to wash it with soap and disinfected water because the contents are unknown.[10]
Communities particularly at risk are those located in low-lying areas, near water, or downstream from a dam.[11]
Hey I'm Chloe can you Help me, Thank you :)
What pigment, only present in plants, makes photosynthesis possible?
Answer:
la photosintesis viene de la clorofila de la planta
Which of the following best describes the difference between metals and nonmetals?
a
metals tend to have low melting points and nonmetals have high melting points
b
nonmetals are more reactive than metals
c
metals are brittle and dull
d
metals have high melting points and are malleable, whereas, nonmetals have lower melting points and tend to be brittle.
Answer:
the answer is d.
Explanation:
because metals are refers to natural elements that are hard, shiney, opaque, and dense. nonmetals implies thise chemical substances that are soft, non-shiney, transparent and brittle.
In a single molecule of water, two hydrogen atoms are bonded to a single oxygen atom by _____.
A) hydrogen bonds
B) nonpolar covalent bonds
C) polar covalent bonds
D) ionic bonds
Answer:
C) polar covalent bonds
Explanation:
Polar covalent bonding can be regarded as a chemical bond that involves a pair of electrons which is
unequally shared between two atoms.
The electron are not shared equally as a result of one of the atom spending more time with the electron compare with the other atom. It is one whereby atoms having different electronegativities involves themselves in sharing electrons in a covalent bond
what is the difference b/w combustion and synthesis reaction ?explain with example
Answer:
A synthesis reaction occurs when two or more reactants combine to form a single product in a double replacement reaction two compounds exchange elements. Combustion reaction occurs when a substance reacts quickly with oxygen combustion is commonly called burning. Example'- for synthesis reaction is iron+ oxygen —≥ water . Example:- for combustion reaction is often gaseous products.
may be this was ur answer I hope it might help u
Write the correct formula for each compound named below. Show the from which it is formed.
Answer:
Explanation:
Sodium Chloride = Na⁺ + Cl⁻ = NaCl
Lithium bromide = Li⁺ + Br⁻ = LiBr
Magnesium fluoride = Mg ⁺² + F⁻ = Mg₂F.
Potassium Oxide = K⁺ + O⁻² = K₂O
Calcium sulphide = Ca⁺² + S⁻² = CaS
Aluminum Iodide = Al⁺³ + I⁻ = Al I₃
Barium bromide = Ba⁺² + Br⁻ = BaBr₂
Aluminum sulphide = Al⁺³ + S⁻ = Al₂S₃
Calcium Phosphide = Ca⁺² + P⁻³ = Ca₃P₂
Lithium Nitride = Li⁺ + N⁻³ = Li₃N
Magnesium Oxide = Mg⁺² + O⁻² = MgO
Aluminum Fluoride = Al⁺³ + F⁻ = AlF₃
Lithium Oxide = Li⁺ + O⁻² = Li₂O
Beryllium iodide = Be⁺² + I⁻ = BeI₂
enzyme, fat, sugar. Classify them into the group of organic compounds to which they belong to
Answer:
Enzyme: speed up chemical reactions
- protein
Fat: give us energy
- lipid
Sugar: give us energy
- carbohydrate
GIVE BRAINLEST PLEASE
Buoyancy, density, ductility and solubility describe the ________ of matter
Answer:
the answer is physical properties
What is an important effect of gravity?
Answer:
pulling objects with mass closer to each other
Explanation:
that is the only role of gravity
Assignment Prompt
In this assignment, you will research the relationship between different types of energy when energy is
being transformed. You will present your findings in the form of bar graphs or pie charts that show the
forms of energy at different times in the process. You will then create a poster to display your findings.
Your poster should include a title, a brief description of the energy transformation you are showing, your
graphs, and works cited.
Assignment Instructions
Step 1: Gather materials and necessary information.
a) You will choose an energy transformation to show. Some of the ones you have learned about
include those that occur in a burning bonfire and a wind turbine.
• Do research to find out about an energy transformation that affects your daily life.
• Find out what the starting types of energy are and what the ending types of energy are.
• Decide how many steps in the process your poster will show.
• Create bar graphs or pie charts to show the relationship between the different types of
energy at different steps in the transformation process.
b) Be sure to keep a list of your references so you can cite them later.
Step 2: Decide on a title.
a) Begin by deciding on a title for your poster and writing it neatly at the top.
b) The title should identify the energy transformation you are showing.
Step 3: Create your graphs.
a) Decide how many graphs you will need to show the energy transformation.
b) You should have at least 3 graphs so that the steps of the transformation will be clear.
c) Each graph should be clearly labeled.
d) Careful use of color on your graphs will make them easy to read and understand.
Step 4: Decide on the descriptive words to include on your poster.
a) People looking at your poster may need more information than just the title and the
graphs. Decide on how you want to present the information your viewers need.
b) Keep the information as short as possible while still including what you need. Remember that
when people look at a poster, they focus on the graphics.
Step 5: Decide on the best layout for your poster.
a) You want to incorporate your text and visuals in a way that is attractive and attention-getting.
b) Keep your graphics as large as possible.
Step 6: Put your poster together.
Step 7: Cite your sources.
a) In the lower right-hand corner of your poster, create a section titled Works Cited.
b) List the resources you used to create your poster. A simple list of website titles and
addresses (URLs) is acceptable. If you used print sources, list the title, author, publisher, city,
and date. The print for this section can be small; it needs to be readable close-up.
Step 8: Identify yourself as the creator of the poster.
a) Place your name in the lower right-hand corner of the poster.
b) On the back, write your teacher’s name and the due date for the poster.
Step 9: Evaluate your poster using this checklist.
If you can check each criterion below, you are ready to submit your presentation.
Yes No Evaluation Question
Does your poster have a title that grabs interest and tells what your subject is?
Are the graphs clearly labeled?
Are the graphs bright and colorful?
Is the text on the poster clearly written so that the viewer understands what you are trying
to show?
Is it free from misspellings?
Is your poster laid out in a way that invites people to look at it?
Have you included your name and works cited?
Is your entire poster neat and attractive?
Step 10: Revise and submit your poster.
a) If you were unable to check off all the requirements on the checklist, revise your poster
before submitting it.
b) Ask your teacher for further instructions about presenting your poster to an audience of your
peers.
Resource Suggestions
• Bar Graph
• Pie Chart
please help! you need to make a poster with any kind of paper and no drawing and if you do any drawing on the poster make it the skill of a 6th grader 100 points plus brainly if you get it right
Answer:
give other guy brainliest
Answer:El mercantilismo en Gran Bretaña consistió en la posición económica de que, para aumentar la riqueza, sus colonias serían proveedoras de materias primas y exportadoras de productos terminados. El mercantilismo provocó muchos actos de lesa humanidad, incluida la esclavitud y un sistema de comercio desequilibrado.
Explanation:
Why are most anions basic in H2O? Give formulas of four anions that are not basic.
Answer:
The anions that can act as bases (conjugate bases of weak acids) have the capability to hydrolyse water and produce OH− ions. Cl−, Br−NO−3, SO2−4 are all conjugate bases of strong acids that don't have the capability to hydrolyse water and so they aren't basic.
Explanation:
Question number 12 I need help
Answer: Its B.
Explanation:
i cant quite explain
Help please for this problem.
An element ceases to be that element if the particle it loses or gains is a neutron.
True or false
Answer:
False
Explanation:
An element is named according to the number of protons in the nucleus. If it gains or loses a neutron, it becomes a different isotope of the same element.
The given statement is false.
Answer:
FALSEExplanation:
#CARRYONLEARNING
Determine the correct set-up below to determine what mass, in grams, of N2 is needed to completely react with 105 g F2 ?
Answer:
C: 1 mol F2/38 g F2
Explanation:
The reaction equation is;
N2 + 3F2 = 2NF3
Now, to know how many grams, of N2 is needed to completely react with 105 g F2 and since the molar mass of N2 is 28.02 g/mol, Molar mass of F2 is 38 g/mol, number of moles attached to N2 and F2 in the reaction are 1 and 3 moles respectively, then we will have;
105 g F2 × 1 mol F2/38 g F2 × 1 mol N2/3 mol F2 × 28.02 g N2/1 mol N2
Option C is Thus correct
Characteristics of a substance that describe its' ability to change into a different substance are called?
Determine the number of molecules present in 1.53 mol of carbon monoxide
Answer:
hi
Explanation:
this is my first time on this app so what do i do
questions.
1) The degree of polarity of a bond is indicated by
A. Ionization energy difference
B. The shape of the molecule
C. Electronegativity difference
D. The partial charges of the molecule
2) When electrons are shared unequally, chemists characterize
Answer:
d
Explanation:
the partial charges of the molecule
if water is added to a 0.70 molar solution of CuSO4 what will change
A. molarity will increase
B. Molarity will decrease
C. the amount of CuSO4 will decrease
D. No change in molarity or amount of salute
Answer:
B. Molarity will decrease
Explanation:
Molarity is one of the measures of the molar concentration of a solution. It is calculated by dividing the number of moles of the solute by the volume of the solvent. This means that the higher the amount of solute in relation to the volume of solvent, the higher the molarity of that solution.
In essence, adding water to a solution dilutes it i.e it increases the solvent's volume in relation to the solute, causing the molarity to decrease. In a nutshell, diluting a solution (by adding water or more solvent) causes the molarity of such solution to decrease. For example, if water is added to a 0.70 molar solution of CuSO4, the molarity of the solution will DECREASE.
What is the formula for silicon tetrabromide?
Answer:
SiBr4
Explanation:
Answer:
SiBr4
hope this helps!
I am wondering how to find out the blood type of my grandson...my daughter is A+..father is in question...she is stressed to the max on the father of this baby boy.
Answer:
A person can identify their blood type at home using a rapid blood typing kit. Using the kit requires a person to pierce a finger with a needle. The kit comes with a card that contains chemicals known as reagents. These test for the presence of the antibodies and Rh factor.
Explanation:
Just like eye or hair color, our blood type is inherited from our parents. Each biological parent donates one of two ABO genes to their child. The A and B genes are dominant and the O gene is recessive. For example, if an O gene is paired with an A gene, the blood type will be A.
List and Describe the two groups of clastic sedimentary rock.
Answer:
Clastic sedimentary rocks are formed from rock fragments or clasts; chemical sedimentary rocks precipitate from fluids, and biochemical sedimentary rocks form as precipitation from living organisms.
Sedimentary rock is classified into two groups based on how they form. They are clastic and chemical. Clastic sedimentary rock is formed as bits of weathered rock become cemented together. Because all kinds of rock are subject to weathering many different minerals can make up this group of rocks.
How many moles of gas would be present in a gas trapped within a 37.0 L vessel at 80.00C at a pressure of 2.50 atm
go here is the answer key
http://msschmidly.weebly.com/uploads/2/6/2/0/26201624/gases_review___calculations.pdf
According to ideal gas equation, there are 271472.7 moles of gas present in a gas trapped within a 37.0 L vessel at 80.0°C at a pressure of 2.50 atm.
What is mole?Mole is defined as the unit of amount of substance . It is the quantity measure of amount of substance of how many elementary particles are present in a given substance.
It is defined as exactly 6.022×10²³ elementary entities. The elementary entity can be a molecule, atom ion depending on the type of substance. Amount of elementary entities in a mole is called as Avogadro's number.
It is widely used in chemistry as a suitable way for expressing amounts of reactants and products.For the practical purposes, mass of one mole of compound in grams is approximately equal to mass of one molecule of compound measured in Daltons .Molar mass has units of gram per mole . In case of molecules, where molar mass in grams present in one mole of atoms is its atomic mass.
Substitution of values in ideal gas equation gives,n= 2.5×37/8.314×353=271472.7 moles.
Learn more about moles,here:
https://brainly.com/question/26416088
#SPJ3
Can you help me please
Answer:
Explanation:
h
How many liters of nitrogen would be needed to react with 93.0 liters of hydrogen using the balance
equation below:
N2 + 3H2 → 2NH3
Answer:
7NH
Explanation:
Which statement are part of the safety protocol for this lab experiment?
Answer:
Always wear safety goggles when performing an experiment.
Use caution when constructing the track.
Ensure that the track is clear before releasing cars.
Report all accidents to the teacher.
Explanation:
Can someone please fill in the blanks?
Answer:
g3gegsgehshhwwjwuwuwu2euyeeyeyyy
Answer:
helium formula He
Ammonia formula NH3
methane formula CH₄
chlorine formula Cl-
Explanation:
A solution of 1.8274g of a polypeptide in 274mL of a aqueous solution has an osmotic pressure at 31.40 degrees C of 2.012 mmHg. The approximate molecular weight of this polymer is _____ g/mol.
Answer: Hence, the approximate molecular weight of the poymer is 64106 g/mol
Explanation:
[tex]\pi=CRT[/tex]
where,
[tex]\pi[/tex] = osmotic pressure of the solution = 2.012 mm Hg = 0.0026 atm
i = Van't hoff factor = 1 (for non-electrolytes)
Mass of solute (polypeptide) = 1.8274 g
Volume of solution = 274 mL
R = Gas constant = [tex]0.0821Latm/Kmol[/tex]
T = temperature of the solution = [tex]31.40^0C=(273+31.40)K=304.4K[/tex]
Putting values in above equation, we get:
[tex]0.0026=\frac{1.8274 g\times 1000}{M\times 274ml}\times 0.0821\times 304.4[/tex]
[tex]M=64106g/mol[/tex]
Hence, the approximate molecular weight of the poymer is 64106 g/mol
Cytokinesis happens differently for plant and animal cells. Both separate cytoplasm between two new daughter cells. However, which type of cell cytokinesis looks like a balloon being separated by a string being pulled tightly between them?
Question 4 options:
Plant Cell cytokinesis
Animal Cell Cytokinesis
Both
Neither
Answer:
Animal Cell Cytokinesis
Explanation:
Answer: Animal cell
Explanation:) It refers to the process of cell division, which takes place during mitosis, is known as cytokinesis.
The process of cytokinesis is different for animal cell and plant cell.
Where, in case of plant cell, a separation, known as cell plate is formed along the center of the parent cell, which is responsible for the separation of the cells.
Whereas, in case of animal cell, the plasma membrane contracts itself along the center, until the two daughter cells are separated from each other.
Hence, from the given information of the question,
The correct answer is animal cell.
Which is an energy source for a coyote?
Answer:
The coyotes are both a plant and meat eaters whose common food is 90% of their diet, is small animals. Rabbits, hares, birds, snakes, fish, crustaceans, and insects are all on the menu.
hopefully this is right :))
Answer:
sun
Explanation: