How would the moon appear to people on earth on this day

It would be half dark
It would be. Quarter dark
It would be complete light
It would be completely dark

Answer:

Iris

Explanation:

Iris can be described as a part of the eyes which regulates the amount of light that enters the eye. The iris is made up of various muscles that control the size of the pupil

When a person is in a well-lighted room, the iris decreases the size of the pupil so that a low amount or medium amount of light is absorbed into the pupil. Also when an individual steps into a dark room the iris increases the size of the pupil so that a high amount of light penetrates the pupil.

Hence without the iris the amount of light that enters the eye cannot be controlled.

Answer:

Lifting 100 N 2 meters is much more work.

Explanation:

Remark

The formula is F * d = W

Givens

F = 100 N

D = 2 m

or

F = 10 N

D = 4 m

Solution

Work = 100 * 2

Work = 200 Joules

Work = 10 * 4

Work = 40 J

Answer:

relative age

Explanation:

i remember this test

Answer:

The magnetic field of Earth is created by currents of electricity that flow in the molten center.

Explanation:

Answer:

A

Explanation:

It would be with the group 2 metals.

Answer:

It's letter D. It doesn't matter because our temperature changes because of the Earth tilts on its axis

Answer:

i'm pretty sure it's 81 calories

Answer:

so as to over come the repulsion between the protons in nuclei that join

Explanation:

it requires high temperature so that the nucleus starts moving at rapid speed which in turn increases their kinetic

In nuclear reactions,  very high temperatures and pressures required for fusion to occur so as to to overcome the repulsion between the protons in the nuclei that join.

There are two types of nuclear reactions which are nuclear fusion and nuclear fission .They involve the combination and disintegration of the element's nucleus respectively.

In nuclear fission, the nucleus of the atom is bombarded with electrons of low energy which splits the nucleus in to two parts .Large amount of energy is released in the process.It is used in nuclear power reactors as it produces large amount of energy.

In nuclear fusion,on the other hand, is a reaction which occurs when two or more atoms combine to form a heavy nucleus.Large amount of energy is released in the process which is greater than that of the energy which is released in nuclear fission process.

Learn more about nuclear reactions,here:

https://brainly.com/question/16526663

#SPJ7

Answer:

W = 3900 J

Explanation:

Given that,

Electrical energy supplied = 7000 J

Gain in gravitational potential energy = 3100 J

We need to find the amount of wasted energy. Let it is W. So,

W = 7000 J - 3100 J

= 3900 J

So, the amount of wasted energy by the motor is 3900 J.

Answer:

radio waves have the lowest frequency

gamma rays have the shortest wavelength

Explanation:

radiation waves have the longest wavelength but the lowest frequency however gamma rays have highest frequency but shortest wavelength .

and x rays has a higher frequency than UV waves because x rays comes after UV in the spectrum

hope this helps

please mark it

Answer:

c. 300 J

Explanation:

Given

Power (p) = 10 W

Time (t) = 0.5 minutes = 30 seconds

Energy (E) = ?

We know

p = E/t

10 = E / 30

E = 300 Joule

Answer:

3MgCl2 has 9 atoms.

Explanation:

The Element Magnesium (Mg) has 3 atoms.

The Element Chloride (Cl) has 6 attoms.

Their fore 6 + 3 is 9 of course. 3MgCl2 has 9 atoms.

BTW: 3MgCl2 is a molecular compound as well as H2O and CO2.

Answer:

300 Hz.

Explanation:

The frequency of a sound wave is the same as that of the source. For example, a tuning fork vibrating at a given frequency would produce sound waves that oscillate at the same frequency.

The frequency that you will hear when the tuning fork is stuck against a table is 300 Hz.

Frequency is a measurement of how often a repetitive event occurs in a given amount of time. It is commonly used to describe the rate at which waves oscillate or vibrate. The unit of frequency is hertz (Hz), which represents the number of cycles or oscillations per second.

For example, in the case of sound waves, frequency is related to the pitch of the sound. Higher frequency sound waves have a higher pitch, while lower frequency sound waves have a lower pitch. Similarly, in the case of electromagnetic waves such as light, frequency is related to the color of the light. Higher frequency electromagnetic waves correspond to colors such as blue and violet, while lower frequency electromagnetic waves correspond to colors such as red and orange.

The relationship between frequency, wavelength, and the speed of the wave is given by the formula:

frequency = speed of the wave / wavelength

This formula shows that the frequency of a wave is inversely proportional to its wavelength, assuming the speed of the wave remains constant. In other words, as the wavelength of a wave increases, its frequency decreases, and vice versa.

Frequency is an important concept in many fields, including physics, engineering, and communications. It is used to describe and analyze a wide range of phenomena, from the behavior of sound and light waves to the performance of electronic circuits and systems.

Here in the Question,

When a tuning fork is struck against a table, it vibrates at its natural frequency, which is determined by its physical properties such as its mass, shape, and material. The vibration of the tuning fork creates sound waves that travel through the air, and our ears perceive these waves as sound.

The frequency of the sound that we hear depends on the frequency of the sound waves that reach our ears. When the sound waves from the tuning fork travel through the air, they undergo a phenomenon called the Doppler effect, which causes the frequency of the sound waves to change depending on the relative motion between the source of the sound waves (the tuning fork) and the observer (our ears).

If the tuning fork is stuck against a table and is not moving relative to the observer, the frequency of the sound waves that reach our ears will be the same as the natural frequency of the tuning fork, which is given as 300 Hz in this case.

Therefore, the frequency that you will hear when the tuning fork is stuck against a table is 300 Hz.

To learn more about Frequency click:

brainly.com/question/1292129

#SPJ2

Answer:

A

Explanation:

Answer:

2.8 × 10^-11 C

Explanation:

The computation of the magnitude of q is shown below;

The electric field at point P because of point charge Q is provided by,

E = 8.6 × 10^-2 N/C

And, the separation between charge Q and P is r = 1.7m

Now According to the Coulomb's law,

E = kQ ÷ r²

8.6 × 10^-2 = 9 × 10^9 × Q ÷ (1.7)²

8.6 × 10^-2 × 2.89 ÷ 9 × 10^9 = Q

Q = (8.6 × 2.89 ÷ 9) × 10^-11

Q = 2.76 × 10^-11 C

= 2.8 × 10^-11 C

Answer:

Dog2 has most kinetic energy .

B:324j

Answer:

i think its 644

Explanation:

Answer:

weather conditions

Explanation:

hi I hope it's help you

Answer:

The law of reflection states that the angle of reflection equals the angle of incidence—θr = θi. The angles are measured relative to the perpendicular to the surface at the point where the ray strikes the surface.

Explanation:

mark me as brainliest

Answer:

Machine; greater; thermal.

Explanation:

Conduction can be defined as the transfer of electric charge or thermal energy as a result of the movement of particles. When the conduction relates to electric charge, it is known as electrical conduction while when it relates to thermal energy, it is known as heat conduction.

In the process of heat conduction, thermal energy is usually transferred from fast moving particles to slow moving particles during the collision of these particles. Also, thermal energy is typically transferred between objects that has different degrees of temperature and materials (particles) that are directly in contact with each other but differ in their ability to accept or give up electrons.

Mathematically, the efficiency of a machine is given by the formula;

[tex] Efficiency = \frac {Mechanical \; advantage}{Velocity \; ratio} * 100 [/tex]

Hence, the lower the efficiency of a machine, the greater the percentage of energy that is degraded to thermal energy. We experience inefficiency in machines due to the fact that energy are being transformed or converted from one form to another.

Answer: 1.1 x 10^-10 C

Explanation:

Answer:

1.1 x 10^-10 C

Explanation:

on edg 21

Explanation:

 a couple is a system of forces with a resultant moment but no resultant force. A better term is force couple or pure moment. Its effect is to create rotation without translation, or more generally without any acceleration of the centre of mass. 

Answer:

Time, t = 13.34 seconds.

Explanation:

Given the following data;

Initial velocity, u = 85km/hr to meters per seconds = 85*1000/3600 = 23.61 m/s

Final velocity, v = 45km/hr to meters per seconds = 45*1000/3600 = 12.5 m/s

Acceleration, a = -3 km/hr/sec to meters per seconds square = -3*1000/3600 = -0.833m/s²

To find the time;

Acceleration = (v - u)/t

-0.833 = (12.5 - 23.61)/t

-0.833t = -11.11

t = 11.11/0.833

Time, t = 13.34 seconds.

Answer:

11.A

12.C

13.D

Explanation:

12.might be emotional benefits but they are often associated with our mental health , which is why I gave the answer C . its up to u now

Hello,

Assuming that the initial velocity of the jumper is zero, on Earth any freely falling object has an acceleration of 9.8 m/s².  

✔ We have : a = v/Δt = ⇔ Δt = v/a

If a cliff jumper leaps off the edge of a 100 m cliff , then she would have fallen 4.51 seconds before hitting the water.

There are three equations of motion given by  Newton,

v = u + at

S = ut + 1/2 × a × t²

v² - u² = 2 × a × s

As given in the problem If a cliff jumper leaps off the edge of a 100 m cliff, then we have to find out how long she falls before hitting the water.

By using the second equation of the motion,

S = ut + 1/2 × a × t²

100  = 0 + 0.5 × 9.8 × t²

t²  = 100 / 4.9

t = 4.51 seconds

Thus, If a cliff jumper leaps off the edge of a 100 m cliff, then she would have fallen 4.51 seconds before hitting the water.

To learn more about equations of motion here, refer to the link given below ;

brainly.com/question/5955789

#SPJ2