Answer You need to consider that the gravity on earth is 9.8 m/s/s. This means any object you let go on the earths surface will gain 9.8 m/s of speed every second. You need to apply a force on the object in the opposite direction to avoid this acceleration. If you are pushing something up at a constant speed, you are just resisting earths acceleration. The more massive and object is, the greater force is needed to accelerate it. The equation is Force = mass*acceleration. So for a 2kg object in a 9.8 m/s/s gravity you need 2kg*9.8m/s/s = 19.6 Newtons to counteract gravity. Work or energy = force * distance. So to push with 19.6 N over a distance of 2 meters = 19.6 N*2 m = 39.2 Joules of energy. There is an equation that puts together those two equations I just used and it is E = mgh
The amount of Energy to lift an object is (mass) * (acceleration due to gravity) * (height)
:Hence, the Work done to life the mass of 2 kg to a height of 10 m is 196 J. Hope it helps❤️❤️❤️
Explanation:
A plastic cup weighing 100 g floats on water so that 1/4 of the volume of the cup is immersed in water. How much volume of oil can be poured into the glass to keep it still sinking? The density of the oil is 900 kg / m
Answer:
Any floating object displaces a volume of water equal in weight to the object's MASS. ... If you place water and an ice cube in a cup so that the cup is entirely full to the ... If you take a one pound bottle of water and freeze it, it will still weigh one ... Fresh, liquid water has a density of 1 gram per cubic centimeter (1g = 1cm^3, ...
A mole of a monatomic ideal gas at point 1 (101 kPa, 5 L) is expanded adiabatically until the volume is doubled at point 2. Then it is cooled isochorically until the pressure is 20 kPa at point 3. The gas is now compressed isothermally until its volume is back to 5 L (point 4). Finally, the gas is heated isochorically to return to point 1.
a. Draw the four processes and label the points in the pV plane.
b. Calculate the work done going from 1 to 2.
c. Calculate the pressure and temperature at point 2.
d. Calculate the temperature at point 3.
e. Calculate the temperature and pressure and point 4.
f. Calculate the work done going from from 3 to 4.
g. Calculate the heat flow into the gas going from 3 to 4. g
Answer:
(a). Check attachment.
(b). 280.305 J.
(c). 31.81 kpa; 38.26K.
(d). 24.05K.
(e). 24.05k; 40kpa.
(f). -138.6J.
Explanation:
(a). Kindly check the attached picture for the diagram showing the four process.
1 - 2 = adiabatic expansion process.
2 - 3 = Isochoric process.
3 - 4 = isothermal process.
4 - 1 = isochoric process.
(b). Recall that the process from 1 to is an adiabatic expansion process.
NB: b = 5/3 for a monoatomic gas.
Then, the workdone = (1/ 1 - 1.66) [ (p1 × v1^b)/ v2^b × v2 - (p1 × v1)].
= ( 1/ 1 - 5/3) [ (101 × 5^5/3) × 10^1 -5/3] - 101 × 5.
Thus, the workdone = 280.305 J.
(c). P2 = P1 × V1^b/ V2^b = 101 × 5^5/3/ 10^5/3 = 31.81 kpa.
T2 = P2 × V2/ R × 1 = 31.81 × 10/ 8.324 = 38.36k.
(d). The process 2 - 3 is an Isochoric process, then;
T3 = T2/P2 × P3 = 38.26/ 31.82 × 20 = 24.05K.
(e). The process 3 - 4 Is an isothermal process. Then, the temperature at 4 will be the same temperature at 3. Tus, we have the temperature; point 3 = point 4 = 24.05k.
The pressure can be determine as below;
P4 = P3 × V3/ V4 = 20 × 10/ 5 = 200/ 5 = 40 kpa.
(f) workdone = xRT ln( v4/v3) = 1 × 8.314 × 24.05 × ln (5/10) = - 138.6 J
what is the mystery Greene discussion and why does he say it is something we should all care about
Answer:
The mystery that Greene discusses is that dark energy is causing the expansion of the universe to accelerate. However, this cannot be explained by the laws of Physics.
Explanation:
I majored in Physics
How can you tell whether an object is neutral
or charged? What would you have to do to test
that object?
Answer:
The number of electrons that surround the nucleus will determine whether or not it is electrically charged or electrically neutral
Explanation:
The dielectric constant of the interior of a protein is considerably smaller than that of water. How would this difference in dielectric constants affect the strength of an electrostatic interaction between two opposite charges with the same distance between them if the charged groups were located in the interior of the protein rather than on its surface
Answer:
the interaction in the protein is greater than the surface with water
\frac{F_i}{F_s} = \frac{\epsilon_s}{ \epsilon_i} \ > 1
Explanation:
The electric force for a charge is
F = [tex]\frac{1}{4\pi \epsilon} \ \frac{q^2}{r^2}[/tex]
In the exercise indicate that the charge is q and the distance r is maintained, the test charge is another
therefore if we use the index i for the dielectric constant ([tex]\epsilon_i[/tex]) in the protein
[tex]F_{i} = \frac{1}{4\pi \epsilon_i} \frac{q^2}{r^2}[/tex]
the electric force in water with dielectric constant ([tex]\epsilon_s[/tex])
[tex]F_s = \frac{1}{4\pi \epsilon_s} \frac{q^2}{r^2}[/tex]
[tex]\epsilon_i < \epsilon_s[/tex]
if we look for the relationship between these forces
[tex]\frac{F_i}{F_s} = \frac{\epsilon_s}{ \epsilon_i} \ > 1[/tex]
therefore the interaction in the protein is greater than the surface with water
Which statement best compares coal and ores?
Both are burned for energy.
Both take millions of years to form.
Both require oxygen to form.
Both are used to make coins.
Answer:
Option 2 both take millions of years to form
Explanation:
Both coal and ores take millions of years to form.
What are ores?Ore is a naturally occurring rock or silt that has precious minerals in it that may be extracted, processed, and sold for a profit. These minerals are usually metals. Mining is the process of removing ore from the soil. The valuable metals or minerals are then removed by treating or refining the ore, frequently through smelting.
The concentration of the desired ingredient in an ore is referred to as its grade. To decide if a rock has a high enough grade to be worth mining and is therefore regarded as an ore, the value of the metals or minerals it contains must be evaluated against the expense of extraction.
Typically, oxides, sulphides, silicates, or native metals like copper or gold are the minerals of interest. To separate the valuable components from the waste rock, ore must be treated. Numerous geological processes collectively known as ore genesis are responsible for the formation of ore deposits.
Learn more about ore here:
https://brainly.com/question/4712893
#SPJ2
Galileo
o did not believe friction existed
o believed that friction stopped objects in motion
o believed that friction kept objects in motion
О
assumed that in a frictionless environment objects would never move
Answer:
object would move but it could be difficult to slow down or stop.
1 What is a vector field?
2 How do you know that potential energy is converted into kinetic energy in certain force fields?
3 What is the rule on electric charges attracting or repelling?
Opposites attract, equals repel
4 How can atoms use electric charges to bond?
5 Where is the potential energy of a magnet stored?
6 How can you tell which pole is the north and which pole is the south in a magnet?
7 How can you increase the potential energy of a magnetic field?
8 If you have two charges alone in space, what will they do to each other?
9 What must occur in magnets to have it generate a magnetic field?
10 What is an electromagnet? A magnet that is made from metal and electrified and with a coil
Answer:
1. a vector field is an assignment of a vector to each point in a subset of space.
2. The direct answer is that it happens through Newton’s second law. If an object is in a potential field that is different at different points in space, then the object will experience a force in the direction in which the potential energy decreases. Newton’s second law says that a force causes a change in motion, which changes the kinetic energy.
3. According to Coulomb, the electric force for charges at rest has the following properties: Like charges repel each other; unlike charges attract. Thus, two negative charges repel one another, while a positive charge attracts a negative charge. The attraction or repulsion acts along the line between the two charges.
4. Ions are charged atoms that form when an atom donates or accepts one or more negatively charged electrons. Cations (ions with a positive charge) are attracted to anions (ions with a negative charge). This attraction is called an ionic bond.
5. Magnetic Field
Hope it Helps!!!!
difine precision and accuracy
Animals conduct_______.
A. cellular respiration
B. photosynthesis
C. both cellular respiration and photosynthesis
two small identical conducting spheres have charges of 2.0x10-9C and - 0.5x109 C respectively when they are placed 4cm apart, what is the force between them? If they are brought into contact and then separated by 4cm, what is the force between them?
Answer:
6
Explanation:
nothingnsbejejjdbsbzbawkje
Help with both questions I’ll mark brainliest
Answer:
gas, liquid, solid
sound cannot travel in space
Answer:
1. gas , liquid , gas
2.sound cannot travel in space
Magnus has reached the finals of a strength competition. In the first round, he has to pull a city bus as far as he can. One end of a rope is attached to the bus and the other is tied around Magnus's waist. If a force gauge placed halfway down the rope reads out a constant 2100 Newtons while Magnus pulls the bus a distance of 1.30 meters, how much work does the tension force do on Magnus
Answer:
Workdone = -2730 J
Explanation:
Formula for workdone is;
W = Force × Displacement
Now, according to Newton's 3rd law of motion, to every action, there is an equal and opposite reaction.
In the question given, we are told that a force gauge placed halfway down the rope reads out a constant 2100 Newtons while Magnus pulls the bus. This means that the force exerted by the rope on Magnus acts in an opposite direction to that which Magnus does to the rope.
Therefore, the force will be in the negative direction.
So;
Workdone = -2100 N × 1.3 m
Workdone = -2730 J
In a physics lab experiment for the determination of moment of inertia, a team weighs an object and finds a mass of 2.15 kg. They then hang the object on a pivot located 0.163 m from the object's center of mass and set it swinging at a small amplitude. As two of the team members carefully count 113 cycles of oscillation, the third member measures a duration of 241 s. What is the moment of inertia of the object with respect to its center of mass about an axis parallel to the pivot axis
Answer:
0.339 kgm²
Explanation:
We know the period of this pendulum, T = 2π√(I/mgh) where I = moment of inertia of the object about the pivot axis, m = mass of object = 2.15 kg, g = acceleration due to gravity = 9.8 m/s² and h = distance of center of mass of object from pivot point = 0.163 m.
Since T = 2π√(I/mgh), making I subject of the formula, we have
I = mghT²/4π²
Now since it takes 241 s to complete 113 cycles, then it takes 241 s/113 cycles to complete one cycle.
So, T = 241 s/113 = 2.133 s
So, Substituting the values of the variables into I, we have
I = mghT²/4π²
I = 2.15 kg × 9.8 m/s² × 0.163 m × (2.133 s)²/4π²
I = 15.63/4π² kgm²
I = 0.396 kgm²
Now from the parallel axis theorem, I = I' + mh² where I' = moment of inertia of object with respect to its center of mass about an axis parallel to the pivot axis
I' = I - mh²
I' = 0.396 kgm² - 2.15 kg × (0.163 m)²
I' = 0.396 kgm² - 0.057 kgm²
I' = 0.339 kgm²
A shuttle bus slows down with an average acceleration of -2.4 m/s2. How long does it
take the bus to slow from 9.0 m/s to rest?
Answer:
[tex]\boxed {\boxed {\sf 3.75 \ seconds }}[/tex]
Explanation:
Average acceleration is found by dividing the change in acceleration by the time.
[tex]a=\frac{ v_f-v_i}{t}[/tex]
The shuttle bus has an acceleration of -2.4 meters per square second. It slows from 9.0 meters per second to rest, or 0 meters per second. Therefore:
[tex]a= -2.4 \ m/s^2 \\v_f= 0 \ m/s \\v_i= 9 \ m/s[/tex]
Substitute the values into the formula.
[tex]-2.4 \ m/s^2=\frac{0 \ m/s - 9 \ m/s}{t }[/tex]
Solve the numerator.
[tex]-2.4 \ m/s^2 = \frac{-9 \ m/s}{t}[/tex]
We want to solve for t, the time. We have to isolate the variable. Let's cross multiply.
[tex]\frac{-2.4 \ m/s^2}{1} = \frac{-9 \ m/s}{t}[/tex]
[tex]-9 \ m/s *1= -2.4 \ m/s^2 *t[/tex]
[tex]-9 \ m/s=-2.4 m/s^2*t[/tex]
t is being multiplied by -2.4. The inverse of multiplication is division, so divide both sides by -2.4
[tex]\frac{-9 \ m/s }{-2.4 \ m/s^2} =\frac{ -2.4 \ m/s^2*t}{-2.4 \ m/s^2}[/tex]
[tex]\frac{-9 \ m/s }{-2.4 \ m/s^2} =t[/tex]
[tex]3.75 \ s=t[/tex]
It takes 3.75 seconds.
On Earth, the number flux of solar neutrinos from the p-p chain is:
f_neutrino = 2fo/2.62MeV
Other nuclear reactions in the Sun supplement this neutrino flux with a small additional flux of higher-energy neutrinos. A neutrino detector in Japan, named SuperKamiokande, consists of a tank of 50 kton of water, surrounded by photomultiplier tubes. The tubes detect the flash of Cerenkov radiation emitted by a recoiling electron when a high-energy neutrino scatters on it.
Required:
a. How many electrons are there in the water of the detector?
b. Calculate the detection rate for neutrino scattering, in events per day.
Answer:
Explanation:
The volume of the tank = 50 kton
50 kton = 5 × 10⁷ kg
Since 18 grams of water will contain: 10 electrons × 6.023 × 10²³
Then;
5× 10⁷ kg will contain [tex]( \dfrac{5 \times 10^7 \times 10^3}{18}) \times 10 \times 6.023 \times 10^{23}[/tex]
= 1.67 × 10³⁴ electrons
(b)
Suppose:
[tex]f_{neutrino} = \dfrac{2f_o}{26.2 MeV} = 6.7\times 10^{10} \ s^{-1} cm^{-2}[/tex]
Then;
10⁻⁶ of [tex]f_{neutrino} = 6.7 \times 10^{10} \times 10^{-6} \ s^{-1} cm^{-2}[/tex]
[tex]=6.7 \times 10^{4}\ s^{-1} cm^{-2}[/tex]
Thus, the number of high energy neutrinos which will interact with water is:
= [tex]6.7 \times 10^4 \times \sigma[/tex]
= [tex]6.7 \times 10^4 \times 10^{-43}[/tex]
= [tex]6.7 \times 10^{-39} s^{-1}[/tex]
For 1.67 × 10³⁴ electrons, the detection rate is:
[tex]6.7 \times 10^{-39} \times 1.67 \times 10^{34}[/tex]
[tex]= 11.19 \times 10^{-5} \ s^{-1}[/tex]
= 9.668 per day
[BWS.02]If the same experiment is repeated in different parts of the world by different scientists,
the results will be the same
the results will become invalid
the outcome of the experiment will be non testable
the outcome of the experiment will be non observable
Answer:
the results will be the same.it may be
If the same experiment is repeated in different parts of the world by different scientists, the results will be the same.
What is scientific experiment?An experiment is a procedure that is carried out to support or refute a hypothesis, or to determine the efficacy or likelihood of something that has never been tried before. Experiments shed light on cause-and-effect relationships by demonstrating what happens when a specific factor is changed.
Controls are typically included in experiments to minimise the effects of variables other than the single independent variable. This improves the reliability of the results, often by comparing control measurements to the other measurements. Scientific controls are an essential component of the scientific method.
Hence, If the same experiment is repeated in different parts of the world by different scientists, the results will be the same.
Learn more about experiment here:
https://brainly.com/question/11256472
#SPJ2
Any change in the cross section of the vocal tract shifts the individual formant frequencies, the direction of the shift depending on just where the change in area falls along the standing wave. Constriction of the vocal tract at a place where the standing wave of a formant exhibits minimum-amplitude pressure oscillations generally causes the formant to drop in frequency; expansion of the tract at those same places raises the frequency. Three other major tools for changing the shape of the tract in such a way that the frequency of a particular formant is shifted in a particular direction are the jaw, the body of the tongue and the tip of the tongue. Moving the various articulatory organs in different ways changes the frequencies of the two lowest formants over a considerable range [18].
One way to increase formant frequency is to ________ the vocal tract at a place where the standing wave of a formant frequency exhibits minimum-amplitude pressure oscillations.
a. Stretch
b. Vibrate
c. Contract
d. Expand
Answer:
The correct answer is option D.
Explanation:
It is stated in the question that constriction of the vocal tract at a place where the standing wave of a formant exhibits minimum-amplitude pressure oscillations generally causes the formant to drop in frequency so to increase formant frequency, the vocal should expand where the standing wave of a formant exhibits minimum-amplitude pressure oscillations. The answer is D.
I hope this helps.
Plzz help me with this
Answer: d
Explanation:
Stacy collected the data shown in the table.
Number of Washers Total Mass Total Force
0.6 kg 5.9 N
2
1.2 kg 11.8 N
3
1.8 kg 17.6N
4
2.5 kg 24.5 N
5
3.2 kg 31.4 N
What's the general relationship between mass and gravitational force?
Answer:
1.8 Kg 17.6N
Explanation:
I don't know the explanation hahaha
Answer:
The gravitational force on an object increases as the object’s mass increases.
Explanation:
This is the answer on Edmentum. :)
Tyler and Jim race each other up a mountain on their bicycles. Tyler rides a road bike on the switchbacks of the twisting and turning mountain road. Jim rides a mountain bike and follows a direct, but steeper, straight-line path up the mountain. They start at the same time and place at the bottom of the mountain and finish at the same time and place at the top of the mountain. From start to finish a. whose distance traveled was longer? b. whose displacement was longer? c. which rider had the faster average speed? d. which rider had the faster average velocity? e. who won the race?
Answer:
Explanation:
Displacement is minimum distance between initial and final point .
Distance is total length of path covered in a journey .
a )
Tyler covered a longer distance in the journey because total length of path covered by him is longer due to curved path .
b )
Both have same displacement , because minimum distance between initial and final point in both the case is same .
c )
average speed = distance / time
as time is same for both the case ,
average speed ∝ distance
As distance covered by Tyler is more , his average speed is more .
d )
average velocity = displacement / time
As both displacement and time are same in both the case , average velocity in both the case is same .
e )
They start at the same time and place at the bottom of the mountain and finish at the same time , both have tie and nobody won the race , in spite of speed of Tyler being greater .
a 6.25-gram bullet traveling at 365 ms strikes and enters a 4.50-kg crate. The crate slides 0.15 m along a wood floor until it comes to rest. What is the change in kinetic energy of the system after the collision
Answer:
the change in kinetic energy of the system is 0.577 J
Explanation:
Given;
mass of the bullet, m₁ = 6.25 g = 0.00625 kg
initial velocity of the bullet, u₁ = 365 m/s
mass of the crate, m₂ = 4.5 kg
initial velocity of the crate, u₂ = 0
distance moved by the system after collision, d = 0.15 m
Determine the final velocity of the system after collision;
m₁u₁ + m₂u₂ = v (m₁ + m₂)
0.00625 x 365 + 4.5 x 0 = v(0.00625 + 4.5)
2.2813 + 0 = v(4.5063)
2.2813 = v(4.5063)
v = 2.2813 / 4.5063
v = 0.506 m/s
The change in kinetic energy of the system after collision is calculated as;
ΔK.E = ¹/₂ (m₁ + m₂)v²
ΔK.E = ¹/₂ (4.506) x 0.506²
ΔK.E = 0.577 J
Therefore, the change in kinetic energy of the system is 0.577 J
a surfer talks about riding a 20-foot wave. Which measurement of waves is the surfer describing?
frequency
amplitude
wavelength
speed
60 POINTS!!
Answer:
C. Amplitude
Explanation: Amplitude is the maximum displacement from the equilibrium of a wave. Basically the height.
A diet is to contain at least 2400 mg vitamin C, 1800mg Calcium, and 1200 calories every day. Two foods, a dairy-based meal and a vegan option are to fulfill these requirements. Each ounce of the dairy-based meal provides 50 mg vitamin C, 30 mg Calcium, and 10 calories. Each ounce of the vegan option provides 20 mg vitamin C, 20 mg Calcium, and 40 calories. If the dairy-based meal costs $0.042 per ounce and the vegan option costs $0.208 per ounce, how many ounces of each food should be purchased to minimize costs? What is that minimum cost (per day)?
Answer:
The answer is below
Explanation:
Let x represent the number of ounce of dairy based meal and let y represent the number of vegan option in ounce.
Since the diet must contain at least 2400 mg vitamin C, therefore:
50x + 20y ≥ 2400
Since the diet must contain at least 1800 mg Calcium, therefore:
30x + 20y ≥ 1200
Since the diet must contain at least 1200 calories, therefore:
10x + 40y ≥ 1200
Therefore the constraints are:
50x + 20y ≥ 2400
30x + 20y ≥ 1200
10x + 40y ≥ 1200
x > 0, y > 0
The graph was drawn using geogebra online graphing tool, and the solution to the problem is at:
C(30, 45) and D(48, 18)
dairy-based meal costs $0.042 per ounce and the vegan option costs $0.208 per ounce. The cost equation is:
Cost = 0.042x + 0.208y
At C(30, 45); Cost = 0.042(30) + 0.208(45) = $10.62
At C(48, 18); Cost = 0.042(48) + 0.208(18) = $5.76
The minimum cost is at (48, 18). That is 48 dairy based meal and 18 vegan
A vertical wire carries a current straight up in a region of the magnetic field directed north. What is the direction of the magnetic force on the current due to the magnetic field
Answer:
The direction of the force on the vertical wire is towards the East or right.
Explanation:
Using Fleming's right hand rule, the current is the middle finger pointing straight up, the magnetic field is the fore-finger pointing Northwards and then the thumb is the direction of the force on the vertical wire.
Following these conventions, the thumb points towards the East. So, the direction of the force on the vertical wire is towards the East or right.
Which example is correctly matched with its type of friction?
A. Pushing a car that isn't moving is an example of slkiding friction.
B. A plane flying through the air is an example of static friction.
OC.
A skateboard wheels on cement is an example of rolling friction.
OD.
A sled sliding down a grassy hill is an example of fluid friction.
Answer:
A. pushing a car that isn't moving
If a wave has a speed of 1000 m/s and frequency of 500 Hz, what is the wavelength?
• 1500 Hz
• 2 m
• 0.05 m
Answer:
2 m
Explanation:
speed=frequency×wavelength
wavelength=speed/frequency
wavelength=1000/500
=2 m
Which is an example of positive peer pressure?
O A parent telling her son to wear his seatbelt.
O A student asking others to join the leadership club.
O a teen encouraging a friend to drink alcohol.
O A teacher telling his students to have a safe weekend.
Answer:
B. A student asking others to join the leadership club.
Explanation:
A parent isn't a peer, therefore can't be peer pressure. Drinking is negative for your body, therefore not positive peer pressure. A teacher isn't a peer, therefore the only answer left is B.
How far can a bus carrying small children, travel at a rate of 60 km per hour travel in 2 1/2 hours?
Explanation:
speed = 60km/hr.time = 2¹/2 hr = 5/2 hrdistance = speed × time = 60 ×5/2 = 150kmMARK ME AS BRAINLISTMatter is made of small particles to small to be seen. Which of these best describe evidence of this statement? 1. Tara’s crayons melted when she left them under the sun. 2. Kerris glass of water overflowed when she added ice. 3. Sams basketball expands as he pumps air into it. 4. Stephanie dropped a vase and it broke into pieces.
Answer:
Explanation:
I think the answer is statement no 3.
Hope it helps.
Answer:
1 Tara's crayons melted when she left them under the sun