how much work does it take to pump all the water over the top edge of a cylindrical tank of radius 6 meters and height 14 meters that is filled with water to a depth of 5 meters? round to the nearest kilojoule.

According to combinations formula there are 495 possible committees that can be selected from a group of 12 people.

To calculate this, you can use the formula for combinations

nCr = n!/(r!(n-r)!)

where n is the total number of people (12) and r is the number of people on the committee.
Therefore, the possible number of committees that can be selected is;

= {12!}/{4!8!}
= 12*11*10*9/4*3*2*1

= 11880/24
= 495
Therefore, 495 possible committees can be selected from a group of 12 people if a committee of 4 is to be selected.

Know more about combinations here:

https://brainly.com/question/28065038

#SPJ11

The overall height of the framed picture is 89cm in the total.

The mount is 6 cm across the top and sides and 9 cm across the bottom. As a result, the mount's overall height will be:

45 cm = 6 cm (top) + 30 cm (image height) + 9 cm (bottom).

The mount's entire breadth will be:

6 cm (left) + 40 cm (width of the image) + 6 cm (right) = 52 cm

To get the total height of the framed image, multiply the height of the mount by the height of the picture by twice the width of the frame (since the frame goes around all four sides of the picture).

As a result, the overall height of the framed image will be:

45 centimetre plus 40 cm plus 2(2 cm) Equals 89 cm.

Learn more about area and geometry at

https://brainly.com/question/13487289

#SPJ4

Answer: i am certain that the answer is -6

Answer:

1.   No, the side lengths 3, 5, and 9 cannot make a triangle.

2.  If you are scaling an object by ¹/₃, it makes the object smaller.

     If the real object is 30 inches long, it is 10 inches once it is scaled.

3.  A cube has 6 faces.

     To find the volume, cube the side length:  6³ = 216 in³

Step-by-step explanation:

According to the Triangle Inequality Theorem, the sum of any two sides of a triangle is greater than the length of the third side.

As the sum of the two sides measuring 3 and 5 is 8, and 8 is not greater than 9, the side lengths 3, 5, and 9 cannot make a triangle.

Scaling an object reduces or enlarges its size. When scaling an object:

Therefore, if you are scaling an object by ¹/₃, the object becomes smaller, since ¹/₃ is between zero and 1.

To scale length, simply multiply the length by the scale factor.

Therefore, if a real object is 30 inches long, its length once it is scaled is:

[tex]\implies \sf 30 \times \dfrac{1}{3}=\dfrac{30}{3}=10\;inches[/tex]

A cube is a three-dimensional solid shape with six square faces.

The volume of a cube is the product of its width, length and height.

If the side of a cube measures 6 inches, its volume is:

[tex]\begin{aligned}\implies \sf Volume &=\sf 6 \times 6 \times 6 \\&= \sf 36 \times 6 \\&= \sf 216\;in^3\end{aligned}[/tex]

Answer:

See below, please.

Step-by-step explanation:

Ans 1.

In order to make a triangle, three line segments are needed, and the sum of the lengths of any two sides must be greater than the length of the remaining side. The side lengths 3, 5, and 9 cannot make a triangle because 3 + 5 is less than 9, which violates the triangle inequality.

Ans 2.

Scaling an object by 3 makes the object larger, as each dimension (length, width, and height) is multiplied by 3. If the real object is 30 inches long and is scaled by 3, it will be 90 inches long.

Ans 3.

A cube has 6 faces. To find the volume of a cube when one side measures 6 inches, we use the formula V = s^3, where s is the length of one side. Plugging in s=6, we get V = 6^3 = 216 cubic inches.

Answer:

[tex]y = \frac{1}{7} x + 5[/tex]

Step-by-step explanation:

[tex]x - 7y = - 21[/tex]

[tex] - 7y = - x - 21[/tex]

[tex]y = \frac{1}{7} x + 3[/tex]

R carries inversely as the cube S . If R=9 when S=3 ,  S= 4, when R= 243÷64.

Inverse proportionality is a mathematical relationship between two variables, in which an increase in one variable leads to a decrease in the other variable in such a way that their product remains constant. In other words, if the value of one variable is multiplied by a certain factor, the value of the other variable will be divided by the same factor.

Mathematically, two variables x and y are said to be inversely proportional if their relationship can be expressed as:

x * y = k

where k is a constant, and the symbol * denotes multiplication.

For example, the distance travelled by a car is inversely proportional to the time taken to travel that distance, assuming the car maintains a constant speed. If we let d represent the distance travelled and t represent the time taken, then we can express their relationship as:

d * t = k

where k is a constant

If R varies inversely as the cube of S, then we know that:

R ∝ [tex]\frac{1}{S^{3} }[/tex]

We can express this relationship using a proportionality constant k:

R = [tex]\frac{k}{S^{3} }[/tex]

To find the value of k, we can use the given information that R = 9 when S = 3:

9 = [tex]\frac{k}{3^{3} }[/tex]

9 = [tex]\frac{k}{27 }[/tex]

k = 9 * 27

k = 243

Now we can use this value of k to find S when R = [tex]\frac{243}{64}[/tex]:

[tex]\frac{243}{64}=\frac{243}{S^{3} }[/tex]

Simplifying this equation, we get:

S³ = [tex]\frac{243*64}{243}[/tex]

S³ = 64

S = ∛64

S = 4

Therefore, when R = [tex]\frac{243}{64}[/tex], S = 4.

To know more about equation visit:

https://brainly.com/question/29266068

#SPJ1

I would suggest finding k first.

If [tex]k^2-3k+5=0\\[/tex],

[tex]k=\frac{-(-3)\pm\sqrt{(-3)^2-4(1)(5)}}{2(1)}[/tex] by the quadratic formula.

[tex]k=\emptyset[/tex] by the discriminant being negative.

So the expression in terms of k that you need to find cannot be determined.

Answer
Y. Answer:

y=30

Step-by-step explanation:

(3)^2 equals 9, so the first blank is 9.

You then multiply it by the 2, so second blank is 18.

18+15=33

33-3=30=y

Answer:

30

Step-by-step explanation:

first space should be 9 since 3² is 9

second space should be 18 since 2×9=18

final space should be 30 since 18+15 is 33-3=30

Ally could have started with any whole number, including 0, 1, 2, 3, 4, etc. Whole numbers are numbers that don't contain any fractions, decimals, or negative numbers.

For example, 1/2 is not a whole number, but 2 is a whole number. When Ally chooses a whole number, she could choose any number that fits this criteria. For example, she could choose 0, 1, 4, 17, 100, or any other whole number.
Ally chooses a whole number. The whole numbers are integers that are greater than zero. It includes all the natural numbers (1, 2, 3, ...) and zero. Let's assume Ally selected a whole number as the question mentioned, we will have to determine the possible number options that Ally could have chosen.One whole number that Ally could have chosen could be 1. Since 1 is the first natural number, it is the smallest whole number. The other whole numbers are greater than 1. The next smallest whole number is 2, followed by 3, then 4, and so on.

There are an infinite number of whole numbers since they continue infinitely in both positive and negative directions. There is no limit to the largest or smallest whole number; therefore, Ally could have begun with any whole number.

For more such questions on whole number  

https://brainly.com/question/29207899

#SPJ11

Work Shown:

1 km = 1000 m

5*(1 km) = 5*(1000 m)

5 km = 5000 m

Step-by-step explanation:

let x= m

1 km=1000m

5km= x.m

1km.x/1km=5000.km/1km

x=5000m

therefore 5km=5000m

The amount of gas Karen has and the amount Karen needed to put into her boat obtained using basic arithmetic operations are;

Basic arithmetic operations include addition, subtraction, division and multiplication operations.

The amount of gas Karen has can be found using basic arithmetic operations as follows;

On Monday, Karen needed to put 5 gallons 3 quarts of gas into her boat. Since 1 gallon is equal to 4 quarts, this is equivalent to (5 × 4 + 3) = 23 quarts of gas

On Saturday, she needed to put twice as much gas into her boat as she did on Monday. So on Saturday she needed to put (2 × 23) = 46 quarts of gas into her boat.

Since, Karen had 18 gallon jug of gas available and 1 gallon is equal to 4 quarts, this mean she had (18 × 4) = 72 quarts of gas available.

Learn more on basic arithmetic operations here: https://brainly.com/question/31007191

#SPJ1

The statement that best describes the use of spaces in folders and files names in ArcGIS is "Using spaces in folder and file names in ArcGIS is permitted but strongly discouraged."

ArcGIS is a geographic information system software that is used for creating, editing, analyzing, and sharing spatial data. The software is widely used by GIS professionals, environmental scientists, geographers, and other experts to manage and analyze spatial data.

In ArcGIS, it is possible to use spaces in folder and file names, but it is not recommended. This is because spaces can cause problems when the software tries to access files with spaces in their names. Therefore, it is better to use underscores or hyphens instead of spaces when naming folders and files in ArcGIS. This helps to avoid issues when working with data in ArcGIS.
The statement "Using spaces in folder names in ArcGIS is permitted but strongly discouraged" is the best description of the use of spaces in folder and file names in ArcGIS.

To know more about the "ArcGIS": https://brainly.com/question/29981485

#SPJ11

gtrgrghtrhthjAnswer:

Step-by-step explanation:

g

Answer:

36

Step-by-step explanation:

4*9=36

9*4=36

6*5=36

The arithmetic mean return is 3.6%, and the standard deviation is 2.14%.

To find the arithmetic mean, we add up the five returns and divide by the number of returns (in this case, 5):

(3% + 6% + 0% + 6% + 3%) / 5 = 3.6%

To find the standard deviation, we first need to find the variance. We can do this by taking each return, subtracting the mean return (3.6%), squaring the result, summing these values, and dividing by the number of returns minus 1 (4 in this case):

((3% - 3.6%)^2 + (6% - 3.6%)^2 + (0% - 3.6%)^2 + (6% - 3.6%)^2 + (3% - 3.6%)^2) / 4 = 0.046

The standard deviation is the square root of the variance:

√0.046 = 0.214 or 2.14%

Therefore, the arithmetic mean return for security y is 3.6%, and the standard deviation (sample) is 2.14%.


To know more about arithmetic mean, refer here:

https://brainly.com/question/13000783#

#SPJ11

Option a) The finding that the reputation of lawyers with the general public has declined because of advertising is NOT supported by several studies about lawyer advertising.

Lawyer advertising refers to advertising or soliciting the services of lawyers. It is designed to attract potential clients to retain their services. Lawyer advertising may involve a wide variety of mediums, including television, radio, print media, billboards, and the internet. Legal professionals may advertise their services on a wide range of platforms in order to reach as many people as possible.

According to several studies about lawyer advertising, the public considers the ads a valuable source of information. However, the public objects when advertising is invasive. The findings show that the negative effects of lawyer advertising on the reputation of lawyers with the general public are not supported by empirical data. In other words, the reputation of lawyers with the general public has not declined because of advertising.

The following are some of the other findings of several studies about lawyer advertising:

However, the public also perceives lawyer advertising as an attempt to lure them into hiring a lawyer. Lawyer advertising can increase public awareness about the availability of legal services, but it can also lead to unrealistic expectations regarding the outcome of legal disputes.

Hence option a) is correct.

To know more about the "Lawyer advertising": https://brainly.com/question/14457086

#SPJ11

The probability that the average lifetime of 100 components is less than 4650 hours is 0.62%.

Using the Central Limit Theorem, we can find the probability that the average lifetime of 100 components is less than 4650 hours.

Let x represent the average lifetime of 100 components. The mean and standard deviation of x can be found using the following formulas:

Mean of x = 5000 hours

Standard Deviation of x = 200/sqrt(100) = 20 hours

To find the probability that the average lifetime of 100 components is less than 4650 hours, we need to use the normal distribution formula. This can be written as follows:

P(X < 4650)

⇒ P(Z < (4650-5000)/20)

⇒ P(Z < -2.5)

Using a standard normal table, the probability of Z being less than -2.5 is 0.0062, or 0.62%. Therefore, the probability that the average lifetime of 100 components is less than 4650 hours is 0.62%.

Learn more about probability here:

brainly.com/question/30034780

#SPJ11

The four uppercase letters of the alphabet in block style with rotational symmetry are H, I, O, and X. Rotational symmetry refers to the property of a figure or object that appears identical after being rotated around a central point by a certain angle.

In block style writing, letters are written with straight lines and sharp corners, creating a uniform and geometric appearance. H, I, O, and X are the only uppercase letters that have rotational symmetry and can be written in block style.

H has a rotational symmetry of 180 degrees, meaning it looks the same when rotated 180 degrees around its center point.

I has a rotational symmetry of 180 degrees as well, with the dot above the letter acting as its center point.

O has a rotational symmetry of 360 degrees, meaning it looks the same when rotated any number of degrees around its center point.

Lastly, X has a rotational symmetry of 180 degrees, with the intersection of the two lines acting as its center point.

For more such questions on Rotational symmetry.

https://brainly.com/question/1531736#

#SPJ11

False to say that "cos(0) = 0." Cos(0) is equal to 1, as the input yields the x-coordinate of the spot on the circle for each arc in right spot, where first side coincides positive x-axis or final side spins clockwise first side.

What does it mean to coincide?

occupying the same location in time or space; coinciding; taking up the same spots on a scale. 3. Exactly concur.

Nevertheless, if the query is changed to ask for the angle that measures between 0 & 2 radians for which cos(x) = 0, the response is:

When x is equal to 2 or 3, cos(x) equals 0. The unit circle's corresponding points at these angles are, respectively, (0, 1) and (0, -1).

b. The sin(x) values for these angle measurements are:

As the equivalent point is at (0, 1) just on unit circle, sin(/2) equals 1.Due to (0, -1) being the corresponding point on the unit circle, sin(3/2) = -1.

therefore, False to say that "cos(0) = 0." Cos(0) is equal to 1, as the input yields the x-coordinate of the spot on the circle for each arc in right spot, where first side coincides positive x-axis or final side spins clockwise first side.

To know more about radians visit:

https://brainly.com/question/7721249

#SPJ1

The answer is 1570. To evaluate the expression 547+233×5−142, we need to follow the order of operations, which is PEMDAS (parentheses, exponents, multiplication and division, and addition and subtraction).

There are no parentheses or exponents, so we start with multiplication and division from left to right.

233×5 = 1165

Then, we can simplify the expression to:

547 + 1165 - 142

Next, we add and subtract from left to right:

547 + 1165 = 1712

1712 - 142 = 1570

Find out more about PEMDAS

brainly.com/question/22161640

#SPJ4

Answer:

6.5

Step-by-step explanation:

3 + (and) 7/10 x 5 = 6.5

Hope this helps!

Answer:

Approximately 1.05 × 10⁹ pounds of food are consumed by African elephants in one day.

Step-by-step explanation:

Answer:

Step-by-step explanation:

its 7 or 6\

The conical mound of soil therefore contains 254.34 cubic meters of substance.

How much a receptacle contains can be determined by looking at its volume. Volume is calculated as follows: volume = length x breadth x height.

The following is the algorithm for a cone's volume:

V = (1/3)πr²ⁿ

where,

Substituting the given values, we get:

V = (1/3) x 3.14 x 9²*³

V = 254.34 cubic meters

Therefore, there are 254.34 cubic meters of material in the conical pile of dirt.

To know more about Volume visit:

https://brainly.com/question/463363

#SPJ1

Using Geometric Mean Theorem, In the given triangle, The length of altitude is 12.

The geometric mean theorem states that in a right triangle, the length of the altitude from the right angle to the hypotenuse is the geometric mean of the lengths of the two segments of the hypotenuse

In other words, the square of the length of the altitude from the right angle to the hypotenuse is equal to the product of the lengths of the two segments of the hypotenuse. And the length of the altitude itself is equal to the square root of this product.

Now,

As we know

using Geometric Mean Theorem,

hypotenuse=18+8=26

let base=a

then   26/a=a/8

a²=208

Now, using Pythagoras theorem

8²+(x+9)²=a²

(x+9)²=208-64

x+9=√144

x+9=12

Hence, The length of altitude is 12.

To know more about Geometric Mean Theorem visit the link

https://brainly.com/question/26257841

#SPJ1

According to a recent survey, nearly half of the respondents cited better pay as their primary reason for changing jobs.

The survey was conducted on a national level and the results indicate that a majority of people are looking to increase their earnings by switching jobs.

Other reasons are:

In conclusion, the survey clearly showed that the main reason for job changes among respondents was better pay. However, various other factors also play a role in an individual's decision to switch jobs, such as working conditions, career paths, and location.

To know more about changing jobs refer here:

https://brainly.com/question/20889936

#SPJ11

The above table represents the contents ( colored marble) of a bag. The probability that selected marble had a color other than white or blue is equals to the 0.766234 ( nearest to milinoth).

We have a bag that contains five different types of marbles. See the above table

number of red marbles in a bag = 16

number of green marbles in a bag = 23

number of blue marbles in a bag = 13

number of pink marbles in a bag = 20

number of white marbles in a bag = 5

So, total number of marbles in a bag= 16 + 23 + 5 + 13 + 20 = 77

Now, a single marble is selected and out of the bag. We have to determine probability that it is a color other than white or blue. Let X , Y and Z be three events defined as the following

X = selected marble is white

Y = selected marble is blue

Z = selected marble is other than blue or white

Probability of seclecting white marble, P(X) = 5/77

Probability of seclecting blue marble, P(Y)

= 13/77

Probability of seclecting blue or white marble, P(Y UX) = P(X) + P(Y) = 5/77 + 13/77 = 18/77

So, probability that selected marble has a color other than white or blue, P(Z) = 1 - P( X UY) = 1 - 18/77

= 59/77 = 0.76623376623

Hence, required probability is 0.766234.

For more information about probability, visit :

https://brainly.com/question/25688842

#SPJ4

Complete question :

The above table discribes the contents of a bag that contains red,green, blue,pink and white marbles if you select a single marble out of the bag, what is the probability that it is a color other than white or blue? express your answer as a fraction in lowest terms or a decimal rounded to the nearest millionth.

Certainly, there is a significant difference in the mean amount of e.coli bacteria detected by the two methods for this type of beef. This can be supported statistically by conducting a hypothesis test.

           The null hypothesis ([tex]H_0[/tex]) is that there is no significant difference in the mean amount of E. coli bacteria detected by the two methods. The alternative hypothesis ([tex]H_a[/tex]) is that there is a significant difference in the mean amount of e.coli bacteria detected by the two methods.

          The two-sample t-test can be used to test the hypothesis. The t-test compares the means of two independent groups and determines whether they are significantly different. The t-test assumes that the two samples are normally distributed and have equal variances.

          If the sample sizes are large, then the t-test can still be used even if the samples are not normally distributed.

          The formula for the t-test is:

                   [tex]t = (x_1 - x_2) / [s^2(1/n_1 + 1/n_2)][/tex]

       Where:

                     [tex]x_1[/tex] = the sample mean for method 1

                     [tex]x_2[/tex] = the sample mean for method 2

                     [tex]s^2[/tex] = the pooled variance of the two samples

                     [tex]n_1[/tex] = the sample size for method 1

                     [tex]n_2[/tex] = the sample size for method 2

        The t-value can then be compared to the critical value of  [tex]t[/tex] for the desired level of significance (usually 0.05).

         If the t-value is greater than the critical value of [tex]t[/tex], then the null hypothesis can be rejected and it can be concluded that there is a significant difference in the mean amount of E. coli bacteria detected by the two methods.

Learn more about a significant difference in the mean amount at: https://brainly.com/question/14724376

#SPJ11

In conclusion, the determinant of M being non-zero only guarantees that the equation has a unique solution, but it does not guarantee that it has a solution for every value of A.
If the determinant of M is not equal to zero, then A can be solved in terms of X or X can be solved in terms of A. This is because the matrix M is invertible when its determinant is non-zero. In other words, the matrix M has a unique inverse.
Here are the statements that are correct:
- Given any X, there is one and only one A which will satisfy the equation. This is because when the determinant of M is non-zero, the matrix M is invertible, and hence the equation can be uniquely solved for A in terms of X or for X in terms of A.
- Some values of A (such as A=0) will allow more than one X to satisfy the equation. This is because the determinant of M being non-zero only guarantees that the equation has a unique solution, but it does not guarantee that it has a solution for every value of A.
- Some values of X will have more than one value of A that satisfy the equation. This is true for any equation that has multiple solutions, regardless of the determinant of M.
- Some values of A will have no values of X that satisfy the equation. This is true for any equation that has no solution, regardless of the determinant of M.
- There is no value of X which satisfies the equation when A=0. This is because when A=0, the equation reduces to 0=0, which is true for any value of X.

for such more questions on  determinant

https://brainly.com/question/28207656

#SPJ11

The polynomial (D) y = x4 + 2x3 – 3x2 – 2x + 1 has the graph that passes through the points (–4, 89), (–3, 7), (–1, –1), (1, –1), (4, 329) respectively.

A polynomial is a mathematical statement made up of coefficients and indeterminates that uses only the operations addition, subtraction, multiplication, and powers of positive integers of the variables.

A polynomial is a mathematical equation that solely uses the operations addition, subtraction, multiplication, and non-negative integer exponentiation of variables.

Variables are sometimes known as indeterminates in mathematics.

x² 4x + 7 is an illustration of a polynomial with a single indeterminate x.

So, substitution and trial-and-error are the best ways to solve this problem given the various points and equations that are available as options.

In this regard, we change the equations' examples from 4 to x and see which one produces 89. The solution is D.

Therefore, the polynomial (D) y = x4 + 2x3 – 3x2 – 2x + 1 has the graph that passes through the points (–4, 89), (–3, 7), (–1, –1), (1, –1), (4, 329) respectively.

Know more about polynomials here:

https://brainly.com/question/2833285

#SPJ1

Complete question:

What polynomial has a graph that passes through the given points? (–4, 89), (–3, 7), (–1, –1), (1, –1), (4, 329)

a)y = 2x3 – 3x2 – 2x + 1

b)y = 1x4 – 2x3 – 3x2 + 2x + 1

c)y = x4 – 2x3 + 3x2 + 2x – 1.

d)y = x4 + 2x3 – 3x2 – 2x + 1

To convert Wendall's measurements from inches to feet, we need to divide each measurement by 12, since there are 12 inches in a foot. So, the measurements in feet are:Length (in)Length (ft)242363484605To convert Stacey's measurements from feet to inches, we need to multiply each measurement by 12. So, the measurements in inches are:Length (ft)Length (in)6727848969108Therefore, the measurements of the wooden planks Wendall measured in feet are 2, 3, 4, and 5 feet, and the measurements of the wooden planks Stacey measured in inches are 72, 84, 96, and 108 inches.