Answer:
9.0217g
Explanation:
the chemical formula must be after balancingknown as 92.55 (mass) of KOH+HCL will produce 74.55 (mass) of salt, KCLhence, 11.2g of KOH and HCL will produce (x)g of saltPLEASE HELP DUE BY FEB 4TH PLEASE HELP PICTURE IS ATTACHED
Answer:
4. is the troposphere
5. is the lithosphere
6. is the hydrosphere
7. this would be lithosphere (land), hydrosphere (water), biosphere (living things) and atmosphere (air)
8. this would be the goesphere and atmosphere.
note: hope this helps :)
Do you think that it is necessary and/or important to take a multivitamin everyday to maintain optimal health? What might help you answer this question? What types of things might influence your decision to take a multivitamin every day?
What's ur opinion with explanation???????!!!!!!!!!!
The weight of a box having a mass of 100 kg is N.
Explanation:
weight= mass* 9.8N
100 kg mass weighs about 980 Newtons on Earth.
Pluto has a diameter of 2 300 km.
How does this information suggest to scientists that Pluto is not a planet
Explanation:
it is too small to be a planet as the avrage planet size
can be around 20,000 the smallest planet in the solar system mercurey has more than pluto
If the density is 0.9g/cm3 and the volume is 1.5cm3 ? What is the Mass?
Answer:
1.35g
Explanation:
times the density and volume together to get the mass
0.9 x 1.5 = 1.35g
Please help fast! I will give brainliest!
Answer:(c)
Explanation:
9 of 16
9.
A student drops a ball from 5 feet above the ground. After bouncing once, it only reaches
a maximum height of 4 feet above the ground.
Use energy terms to explain why the ball did not reach its original height after bouncing
once.
A. Some energy was lost
B. Some energy was transferred to the floor and air
C. Some energy disappeared when it hit the floor
D. Some energy was destroyed
9
A 75 gram sample of water is initially at 30 degrees Celsius. What would it's temperature be if
it absorbed 2000 J of heat?
Answer:
T2 = 36.38°C
Explanation:
Given data:
Mass of water = 75 g
Initial temperature = 30 °C
Final temperature = ?
Heat absorbed = 2000 J
Solution:
Specific heat capacity of water is 4.18 J/g.°C
Formula:
Q = m.c. ΔT
Q = amount of heat absorbed or released
m = mass of given substance
c = specific heat capacity of substance
ΔT = change in temperature
ΔT = Final temperature - initial temperature
2000 J = 75 g×4.18 J/g.°C × T2- T1
2000 J = 313.5 J/°C × T2- T1
2000 J = 313.5 J/°C × T2 - 30 °C
2000 J / 313.5 J/°C = T2 - 30 °C
6.38 °C = T2 - 30 °C
T2 = 6.38 °C + 30°C
T2 = 36.38°C
According to kelper, which planet travels the fastest.
1. Earth
2. Jupiter
3. Mercury
4. Neptune
A process that releases heat, such as freezing or condensation is called?
Answer:
exothermic
Explanation:
An exothermic reaction gives off heat energy. Condensation is the process by which water vapor turns into liquid water. This typically occurs when water vapor molecules come into contact with cooler molecules. This causes the water vapor molecules to lose some energy as heat which is a exothermic reaction.
When water becomes a solid, it releases heat, warming up its surroundings. This makes freezing an exothermic reaction.
PLs help mweee Ill mark brainliest
Answer:
I'm pretty sure that it's plate movement...
what is the full name of the compund CuSO4?
Please can you help me? (✿◡‿◡)
CuSO4 is Copper Sulphate.
Car 1 has a body made from aluminium and car 2 has a body made from steel. Which car is likely to
have the better fuel economy?
Answer:
1
Explanation:
Um well if a car is made out aluminum keep in mind the engine = heat and stuff the type of stuff that would burn would cause chemicals/ white flame to form the trioxide aluminum(lll) oxide, Al small 2 O small 3. With Steel this would burn off bits of rust/ion oxide
I could be wrong but thats the best answer i can give sorry mate
Explain why atoms increase in size when the atom gains electrons.
i need help please this is due today
How do I know if hand soap is working properly and how are some methods I can test it?
Answer:
Part A) By seeing if your hands are clean and dont have germs
Part B) Dip your hands in mud and then wash your hands to see results
Explanation:
An atom has 9 protons and 7 electrons. What is its overall charge?
Answer:
Positive
Explanation:
If an atom has more protons than electrons, its overall charge will be positive. Protons have a positive charge, electrons have a negative charge.
1. Electronegativities of the elements Be, Mg, Ca, and Sr follow a specific trend within their group. Based on this trend, the atoms of which element will have the least attraction for an electron?
A) Be.
B) Mg.
C) Ca.
D) Sr.
2. Which element has a larger atomic radius than sulfur?
A) Chlorine.
B) Cadmium.
C) Fluorine.
D) Oxygen.
3. Which ion was formed by providing the second ionization energy to remove an electron?
A) Ca2+.
B) N3–.
C) Fe3+.
D) S2–.
4. The most negative electron affinity is most likely associated with which type of atoms?
A) Large nonmetal atoms.
B) Small nonmetal atoms.
C) Large metal atoms.
D) Small metal atoms.
5. Selected properties of antimony (Sb) and iodine (I) are listed in the table below.
Element AtomRadius(pm) 1st IonEnergy(kJ/mol) ElectroAffinity(kJ/mol) Electronegative
Sb 145 ? –103 2.05
I 140 1008 –295 ?
Which predictions can most likely be made?
Sb has a lower ionization energy but a higher electronegativity than I.
Sb has a higher ionization energy but a lower electronegativity than I.
Sb has a lower ionization energy and a lower electronegativity than I.
Sb has a higher ionization energy and a higher electronegativity than I.
6. Which correctly summarizes the trend in electron affinity?
A) It tends to be very high for group 2.
B) It tends to be more negative across a period.
C) It tends to remain the same across periods.
D) It tends to be more negative down a group.
7. Which explains the change in ionization energy that occurs between removing the first and second electrons from an atom?
A) The ionization energy decreases because the ratio of the protons to electrons increases.
B) The ionization energy increases because the ratio of the protons to electrons increases.
C) The ionization energy decreases because the ratio of the protons to electrons decreases.
D) The ionization energy increases because the ratio of the protons to electrons decreases.
8. Which element would most likely have an electron affinity measuring closest to zero?
A) Na.
B) Al.
C) Rb.
D) Ar.
9. Electronegativities of the elements Na, Al, P, and Cl follow a specific trend across the period. Based on this trend, an electron will be most strongly attracted to
A) Na.
B) Al.
C) P.
D) Cl.
10. Which best describes ionization energy?
A) Energy needed to add an electron to a neutral atom in the gas phase.
B) Energy needed to add an electron to a neutral atom in the liquid phase.
C) Energy needed to remove an electron from an atom or ion in the gas phase.
D) Energy needed to remove an electron from an atom or ion in the liquid phase.
Answer: B D B A C B E D A B
Explanation:
what are ions and how do they work please send me answer
Answer:
hope it helps
please mark me brainliest
Explanation:
An ion is a charged atom or molecule. It is charged because the number of electrons do not equal the number of protons in the atom or molecule. An atom can acquire a positive charge or a negative charge depending on whether the number of electrons in an atom is greater or less then the number of protons in the atom.
how many moles of sodium chloride are in a 122 gram sample
What is the yearly exposure from wearing a watch with a luminous dial?
What are polyatomic ions and how are they formed?
Answer:
Polyatomic ions are covalently bonded groups of atoms with a positive or negative charge caused by the formation of an ionic bond with another ion. Compounds formed from such ion combinations are called polyatomic ionic compounds, but the polyatomic ion behaves as a single uni
Explanation:
Problems 4-6 convert the measurements into moles.
4. 9.03 x1023 C atoms
5. 2.44x1023 H2O molecules
6. 6.02x1023 Li atoms
Answer:
4. 1.5moles
5. 0.405moles
6. 1 mol
Explanation:
To find the number of moles in each susbtance in this question, we divide each number of atom/molecule measurement by Avagadro's number (6.02 × 10^23 atoms)
That is; nA = n × 6.02 × 10^23 atoms
n = nA ÷ 6.02 × 10^23 atoms
Where;
nA = number of atoms
n = number of moles
4.) n of Carbon = 9.03 x 10^23 ÷ 6.02 × 10^23
n = 1.5 × 10^ (23-23)
n = 1.5 × 10^0
n = 1.5 × 1
n = 1.5moles.
5.) n of H2O = 2.44 x 10^23 ÷ 6.02 × 10^23
n = 0.405 × 10^ (23-23)
n = 0.405 × 10^0
n = 0.405moles
6.) n of lithium = 6.02 x 10^23 Li atoms ÷ 6.02 × 10^23
n = 1 × 10^ (23-23)
n = 1 × 10^0
n = 1 mol
Which of the following is a problem caused by acid rain?
1 -is a factor in global warming
2-causes depletion of the ozone layer
3-respiratory problems in humans
4-makes lakes and streams unsuitable aquatic life
Answer:
1
Explanation:
is a factor in global warming
Answer:
sulfur dioxide from coal fired plants in Tennessee
Explanation:
Got it right on the quiz :)
Can someone help me answer this ASAP !!!
Answer: Chlorine I think
Explanation:
Chlorine is added to the water to kill germs. When it is added to a swimming pool, it forms a weak acid called hypochlorous acid that kills bacteria like salmonella and E.
Answer: Chlorine!
Explanation:
When it is added to a swimming pool, it forms a weak acid called hypochlorous acid that kills bacteria like salmonella and E. coli, as well as germs that cause viruses such as diarrhea and swimmer's ear.
O energy flowing from the
krill to the blue whale
What is the form of energy that the blue whale consumes when it eats the point
krill that helps it survive?
thermal
radiant
Chemical
Answer:
thermal
Explanation:
Which of the following materials has the highest density?
A. O water vapor
B. O steam
C. O liquid water
D. O ice
Answer:
Answer is C. liquid water.
Explanation:
I hope it's helpful!
Liquid water has the highest density. Therefore, the correct option is option C among all the given options.
What is density?The density of a substance is defined just like its weight per unit volume. In other words, density is the mass-to-volume ratio or mass for every unit volume. It quantifies how much "stuff" a thing possesses in an unit volume (cubic meter or cubic centimeter).
Density is a measure of how closely stuff is packed together. The density principle was established by the Greek scholar Archimedes, which is simple to compute if one know the equation and its associated units. Lquid water has the highest density.
Therefore, the correct option is option C among all the given options.
To learn more about density, here:
https://brainly.com/question/29775886
#SPJ6
Atoms of which two elements have a combined total of 23 protons?
A.Sodium, Na, and magnesium, Mg
B.Boron, B, and carbon, C
C.Copper, Cu, and zinc, Zn
D.None of these
Answer:
A
Explanation:
Sodium has 11 electrons and Magnesium has 12 electrons. Since here you need to consider atoms, they must have equal amount of protons as electrons to be considered neutral, and so an atom.
So simply 11+12 =23
How many elements are in this chemical formula?
2(NH4)2SO4
Your answer
Answer:
4
Explanation:
Nitrogen (N)
hydrogen (H)
sulfur (S)
oxygen (O)
1. If a cell has waste it needs to store, it will store it: