How much heat is needed to warm 250g of water from 22℃ to 98℃?

Answer:

The gas will occupy a volume of 1.702 liters.

Explanation:

Let suppose that the gas behaves ideally. The equation of state for ideal gas is:

[tex]P\cdot V = n\cdot R_{u}\cdot T[/tex] (1)

Where:

[tex]P[/tex] - Pressure, measured in kilopascals.

[tex]V[/tex] - Volume, measured in liters.

[tex]n[/tex] - Molar quantity, measured in moles.

[tex]T[/tex] - Temperature, measured in Kelvin.

[tex]R_{u}[/tex] - Ideal gas constant, measured in kilopascal-liters per mole-Kelvin.

We can simplify the equation by constructing the following relationship:

[tex]\frac{P_{1}\cdot V_{1}}{T_{1}} = \frac{P_{2}\cdot V_{2}}{T_{2}}[/tex] (2)

Where:

[tex]P_{1}[/tex], [tex]P_{2}[/tex] - Initial and final pressure, measured in kilopascals.

[tex]V_{1}[/tex], [tex]V_{2}[/tex] - Initial and final volume, measured in liters.

[tex]T_{1}[/tex], [tex]T_{2}[/tex] - Initial and final temperature, measured in Kelvin.

If we know that [tex]P_{1} = 121\,kPa[/tex], [tex]P_{2} = 202\,kPa[/tex], [tex]V_{1} = 2.7\,L[/tex], [tex]T_{1} = 288\,K[/tex] and [tex]T_{2} = 303\,K[/tex], the final volume of the gas is:

[tex]V_{2} = \left(\frac{T_{2}}{T_{1}} \right)\cdot \left(\frac{P_{1}}{P_{2}} \right)\cdot V_{1}[/tex]

[tex]V_{2} = 1.702\,L[/tex]

The gas will occupy a volume of 1.702 liters.

Answer:

I think the heat on the surface or the fire under the dish cost evaporation coz when the water got heat tge water evaporate or go to the upper part of dish and cool down then back to the bottom.

Explanation:

Plss correct me if im wrong

Explanation:

First Question

Group 18 elements. This is because the noble elements do not conduct electricity.

Second Question

Chewing in the mouth breaks food into small pieces

Third Question

How many atoms of each element are present in the molecule?

7 carbon atoms, 14 Hydrogen atoms and 1 oxygen atom

Answer:

True

Explanation:

Microscope is an instrument which is used to observe small objects. There are many types of microscope with a different magnitude.

As shown in the picture, the chemical formula for glucose is C6H12O6. This means that there are 6 carbons, 12 hydrogens and 6 oxygens in one molecule of glucose.

Your Answer: 12

Answer:

1.5

Explanation:

0.75M=Moles/2L

Answer:

An example of elevation is a plane flying at 36,000 feet above the ground. An example of elevation is a pope being raised to the position of saint. An example of elevation is a ballet dancer leaping three feet in the air. ... At 8,850 m (29,028 ft), the summit of Mount Everest is the highest elevation on Earth.

Explanation:

please mark me brainly!

hormone erythropoietin (EPO) is responsible for the production of red blood cells.

Answer: no

Explanation: because silicon cannot share over 3 bonds

Answer:

4.03 g

Explanation:

The mass in grams of the hydrogen gas is 4.0 g

From the question,

We are to determine the mass in grams of the hydrogen gas.

First, we will determine the number of moles of hydrogen gas present.

Using the formula,

[tex]Number\ of\ moles =\frac{Number\ of \ molecules}{Avogadro's\ constant}[/tex]

From the given information,

Number of hydrogen molecules = 1.204 × 10²⁴ molecules

Thus,

Number of moles of hydrogen gas present = [tex]\frac{1.204 \times 10^{24} }{6.02 \times 10^{23} }[/tex]

Number of moles of hydrogen gas present = 2 moles

Now, for the mass of the hydrogen gas

Using the formula,

Mass = Number of moles × Molar mass

Molar mass of hydrogen gas = 2.016 g/mol

Then,

Mass of the hydrogen gas = 2 × 2.016

Mass of the hydrogen gas = 4.032 g

Mass of the hydrogen gas ≅ 4.0 g

Hence, the mass in grams of the hydrogen gas is 4.0 g

Learn more on Stoichiometry here: https://brainly.com/question/2861244

Answer:

Earth

Strongest

Moon

Gravitational

Tide

Pulls

Bulge

Waves

Proximity

Low Tide

Answer:

The s-, p-, and d-block elements of the periodic table are arranged into 18 numbered columns, or groups. The elements in each group have the same number of valence electrons. As a result, elements in the same group often display similar properties and reactivity.

Explanation:

On the periodic table, a group refers to a vertical column of elements that share similar chemical properties.

For the main groups, the characteristic do the elements have in common is valence electron configuration and chemical reactivity.

On the periodic table, a group refers to a vertical column of elements that share similar chemical properties. These elements are arranged in such a way that they have the same number of valence electrons, which are the electrons in the outermost energy level (shell) of their atoms. The number of valence electrons is a critical factor in determining the chemical behavior and reactivity of elements, as it governs their ability to form chemical bonds with other elements.

Main group elements, also known as representative elements, are located in the s-block and p-block of the periodic table. These elements are found in Groups 1, 2, and 13 to 18. Each main group is labeled with a number from 1 to 18.

Here are the main characteristics that elements in the same main group (vertical column) have in common:

1. Valence Electron Configuration: Elements in the same main group have identical valence electron configurations. For example, elements in Group 1 (alkali metals) all have one valence electron in their outermost energy level (ns¹), while elements in Group 18 (noble gases) have a full outermost energy level.

2. Chemical Reactivity: Due to their identical valence electron configuration, elements in the same group show similar chemical reactivity. They tend to form similar types of chemical bonds and react similarly with other elements to achieve a more stable electron configuration.

3. Periodic Trends: Main group elements within a group exhibit predictable trends in their physical and chemical properties as you move from the top to the bottom of the group. For example, the atomic radius tends to increase, ionization energy tends to decrease, and metallic character tends to increase as you go down a group.

To know more about periodic table here

https://brainly.com/question/28747247

#SPJ2

Molarity is a unit of concentration defined as the number of moles of solute (the substance being dissolved) per volume of solution (the solvent in which all the solute is dissolved). Mathematically, molarity is expressed as

[tex]M = \frac{\text{ mol solute}}{\text{ L solution}}[/tex].

In this question, we are given the molarity and the volume of a solution of NaCl. We can use this information to calculate the number of moles of NaCl present in the solution. Rearranging the equation to solve for moles of solute, we multiply the molarity by the volume of the solution (the units for volume must be in liters, so 125 mL is expressed as the equivalent 0.125 L):

[tex](8.59 \text{ M})(0.125 \text{ L}) = 1.07 \text{ moles of NaCl}.[/tex]

The question asks for the number of moles of NaCl in this solution, so number 3 would be correct.

Answer: True

Explanation: It always has the same number because the both have or are using the same product.

Answer:

I think that would be true. The faster the wind, the longer it blows, or the farther it can blow uninterrupted, the bigger the waves. Therefore, a wave's size depends on wind speed, wind duration, and the area over which the wind is blowing

Answer: True.

Explanation: Yes, waves get energy from the wind through friction, so you see those waves get bigger each time. The longer the winds blows, the more friction, and energy it's getting, meaning better, and deadly waves. The wind can sometimes cause tsunamis if the its blowing too hard.

Answer: The answer is 4320

Explanation:

I got the answer correct

Answer: It takes more energy to break the bonds of the reactants than is released when the  bonds in the products are formed

Explanation:

Endothermic reactions are defined as the reactions in which energy of the product is greater than the energy of the reactants. The total energy is absorbed in the form of heat. Thus it takes more energy to break the bonds of the reactants than is released when the  bonds in the products are formed

Exothermic reactions are defined as the reactions in which energy of the product is lesser than the energy of the reactants. The total energy is released in the form of heat. Thus More energy is released when the bonds in the products are formed than is used to  break the bonds in the reactants

Answer:

plant cells and eukroyatic algae

Answer:

33.65%

Explanation:

total weight of solution=14.2+28=42.2g

benzene=14.2/42.2*100=33.65%

Answer:

b chemical - thermal and mechanical

Explanation:

energy stored in food in is chemical, so it would only make sense of b) was the answer