Answer:
non of the above
Explanation:
Quantity of heat = mass× specific heat× change in temperature
m= 7kg c= 4.18 temp= 46-25=21°
.......H= 7×4.18×21= 614.46kJ
Answer:610 KJ
Explanation:A P E X answers
A 25.0 kg block is initially at rest on a horizontal surface. A horizontal force of 75.0 N is required to set the block in motion, after which a horizontal force of 60.0 N is required to keep the block moving with constant speed. Find
(a) the coefficient of static friction.
(b) the coefficient of kinetic friction between the block and the surface.
Answer:
(a) 0.31
(b) 0.245
Explanation:
(a)
F' = μ'mg.................... Equation 1
Where F' = Horizontal Force required to set the block in motion, μ' = coefficient of static friction, m = mass of the block, g = acceleration due to gravity.
make μ' the subject of the equation above
μ' = F'/mg............. Equation 2
Given: F' = 75 N, m = 25 kg
constant: g = 9.8 m/s²
Substitute these values into equation 2
μ' = 75/(25×9.8)
μ' = 75/245
μ' = 0.31.
(b) Similarly,
F = μmg.................. Equation 3
Where F = Horizontal force that is required to keep the block moving with constant speed, μ = coefficient of kinetic friction.
make μ the subject of the equation
μ = F/mg.............. Equation 4
Given: F = 60 N, m = 25 kg, g = 9.8 m/s²
Substitute these values into equation 4
μ = 60/(25×9.8)
μ = 60/245
μ = 0.245
A box experiencing a gravitational force of 600 N. is being pulled to the right with a force of 250 N. 825 N. frictional force acting on the box as it moves to the right what is the net force in the Y direction
Answer:A
Explanation:
Explanation:
Given that,
Gravitational force = 600 N
Frictional force = 25 N
Pulled by the Force = 250 N
We know that,
The gravitational force in downward and normal force act in upward. the frictional force in left side and the box pulled by the force to the right side.
The balance equation is along y-axis
The box will not move in y-axis therefore, the net force in the y-axis will be zero.
Hence, The net force in the y-direction will be zero.
A conventional current of 8 A runs clockwise in a circular loop of wire in the plane, with center at the origin and with radius 0.078 m. Another circular loop of wire lies in the same plane, with its center at the origin and with radius 0.03 m. How much conventional current must run counterclockwise in this smaller loop in order for the magnetic field at the origin to be zero
Answer:
I2 = 3.076 A
Explanation:
In order to calculate the current in the second loop, you take into account that the magnitude of the magnetic field at the center of the ring is given by the following formula:
[tex]B=\frac{\mu_oI}{2R}[/tex] (1)
I: current in the wire
R: radius of the wire
μo: magnetic permeability of vacuum = 4π*10^-7 T/A
In the case of the two wires with opposite currents and different radius, but in the same plane, you have that the magnitude of the magnetic field at the center of the rings is:
[tex]B_T=\frac{\mu_oI_1}{2R_1}-\frac{\mu_oI_2}{2R_2}[/tex] (2)
I1: current of the first ring = 8A
R1: radius of the first ring = 0.078m
I2: current of the second ring = ?
R2: radius of the first second = 0.03m
To find the values of the current of the second ring, which makes the magnitude of the magnetic field equal to zero, you solve the equation (2) for I2:
[tex]\frac{\mu_oI_2}{2R_2}=\frac{\mu_oI_1}{2R_1}\\\\I_2=I_1\frac{R_2}{R_1}=(8A)\frac{0.03m}{0.078m}=3.076A[/tex]
The current of the second ring is 3.076A and makes that the magntiude of the total magnetic field generated for both rings is equal to zero.
On Apollo missions to the Moon, the command module orbited at an altitude of 160 km above the lunar surface. How long did it take for the command module to complete one orbit?
Answer:
T = 2.06h
Explanation:
In order to calculate the time that the Apollo takes to complete an orbit around the moon, you use the following formula, which is one of the Kepler's law:
[tex]T=\frac{2\pi r^{3/2}}{\sqrt{GM_m}}[/tex] (1)
T: time for a complete orbit = ?
r: radius of the orbit
G: Cavendish's constant = 6.674*10^-11 m^3.kg^-1.s^-2
Mm: mass of the moon = 7.34*10^22 kg
The radius of the orbit is equal to the radius of the moon plus the distance from the surface to the Apollo:
[tex]r=R_m+160km\\\\[/tex]
Rm: radius of the moon = 1737.1 km
[tex]r=1737.1km+160km=1897.1km=1897.1*10^3 m[/tex]
Then, you replace all values of the parameters in the equation (1):
[tex]T=\frac{2\pi (1897.1*10^3m)^{3/2}}{\sqrt{(6.674*10^{-11}m^3/kgs^2)(7.34*10^22kg)}}\\\\T=7417.78s[/tex]
In hours you obtain:
[tex]T=7417.78s*\frac{1h}{3600s}=2.06h[/tex]
The time that the Apollo takes to complete an orbit around the moon is 2.06h
What is the length of a contention slot in CSMA/CD for (a) a 2-km twin-lead cable (signal propagation speed is 82% of the signal propagation speed in vacuum)
Answer:
1.99*10-4sec
Explanation:
Signal propagation speed=0.82∗2.46∗108m/s
d=2000 m
Tp=20000/0.82∗2.46∗108 sec
ContentionPeriod=2Tp=2∗20000/0.82∗2.46∗10^8
= 1.99* 10^-4seconds
In an undergraduate physics lab, a simple pendulum is observed to swing through 71 complete oscillations in a time period of 1.80 min. What are the period and length of the pendulum
Explanation:
We have
A simple pendulum is observed to swing through 71 complete oscillations in a time period of 1.80 min.
The frequency of a pendulum is equal to the no of oscillation per unit time. so,
[tex]f=\dfrac{N}{t}\\\\f=\dfrac{71}{1.8\times 60}\\\\f=0.65\ Hz[/tex]
Tim period is reciprocal of frequency. So,
[tex]T=\dfrac{1}{0.65}\\\\T=1.53\ s[/tex]
The time period of a pendulum is given by :
[tex]T=2\pi \sqrt{\dfrac{l}{g}}[/tex]
l is length of pendulum
[tex]l=\dfrac{T^2g}{4\pi ^2}\\\\l=\dfrac{T^2g}{4\pi ^2}\\\\l=\dfrac{(1.53)^2\times 9.8}{4\pi ^2}\\\\l=0.58\ m[/tex]
So, the period and length of the pendulum are 1.53 s and 0.58 m respectively.
A block is released from the top of a frictionless incline plane as pictured above. If the total distance travelled by the block is 1.2 m to get to the bottom, calculate how fast it is moving at the bottom using Conservation of Energy.
Complete Question
The diagram for this question is showed on the first uploaded image (reference homework solutions )
Answer:
The velocity at the bottom is [tex]v = 11.76 \ m/ s[/tex]
Explanation:
From the question we are told that
The total distance traveled is [tex]d = 1.2 \ m[/tex]
The mass of the block is [tex]m_b = 0.3 \ kg[/tex]
The height of the block from the ground is h = 0.60 m
According the law of energy
[tex]PE = KE[/tex]
Where PE is the potential energy which is mathematically represented as
[tex]PE = m * g * h[/tex]
substituting values
[tex]PE = 3 * 9.8 * 0.60[/tex]
[tex]PE = 17.64 \ J[/tex]
So
KE is the kinetic energy at the bottom which is mathematically represented as
[tex]KE = \frac{1}{2} * m v^2[/tex]
So
[tex]\frac{1}{2} * m* v ^2 = PE[/tex]
substituting values
=> [tex]\frac{1}{2} * 3 * v ^2 = 17.64[/tex]
=> [tex]v = \sqrt{ \frac{ 17.64}{ 0.5 * 3 } }[/tex]
=> [tex]v = 11.76 \ m/ s[/tex]
The upward velocity of a 2540kg rocket is v(t)=At + Bt2. At t=0 a=1.50m/s2. The rocket takes off and one second afterwards v=2.00m/s. Determine the constants A and B with units.
Answer:
The value of A is 1.5m/s^2 and B is 0.5m/s^³
Explanation:
The mass of the rocket = 2540 kg.
Given velocity, v(t)=At + Bt^2
Given t =0
a= 1.50 m/s^2
Now, velocity V(t) = A*t + B*t²
If, V(0) = 0, V(1) = 2
a(t) = dV/dt = A+2B × t
a(0) = 1.5m/s^²
1.5m/s^² = A + 2B × 0
A = 1.5m/s^2
now,
V(1) = 2 = A× 1 + B× 1^²
1.5× 1 +B× 1 = 2m/s
B = 2-1.5
B = 0.5m/s^³
Now Check V(t) = A× t + B × t^²
So, V(1) = A× (1s) + B× (1s)^² = 1.5m/s^² × 1s + 0.5m/s^³ × (1s)^² = 1.5m/s + 0.5m/s = 2m/s
Therefore, B is having a unit of m/s^³ so B× (1s)^² has units of velocity (m/s)
Two large, parallel, metal plates carry opposite charges of equal magnitude. They are separated by a distance of 40.0 mm, and the potential difference between them is 370 V
A. What is the magnitude of the electric field (assumed to be uniform) in the region between the plates?
B. What is the magnitude of the force this field exerts on a particle with a charge of 2.40 nC ?
C. Use the results of part (b) to compute the work done by the field on the particle as it moves from the higher-potential plate to the lower.
D. Compare the result of part (c) to the change of potential energy of the same charge, computed from the electric potential.
Answer:
Explanation:
A )
electric field E = V / d where V is potential difference between plates separated by distance d .
putting the given values
E = 370 / .040 V / m
= 9250 V / m
B )
Force on charged particle of charge q in electric field E
F = q E
F = 2.4 x 10⁻⁹ x 9250
= 22200 x 10⁻⁹
= 222 x 10⁻⁷ N .
C ) since field is uniform , force will be constant
work done by electric field putting up this force
= force x displacement
= 222 x 10⁻⁷ x 40 x 10⁻³
= 888 x 10⁻⁹ J
D )
change in potential energy
= q ( V₁ - V₂ )
= 2.40 X 10⁻⁹ x 370
= 888 x 10⁻⁹ J .
(a) The magnitude of electric field in the region between the plates is 9,250 V/m.
(b) The magnitude of the force the field exerts on a particle with the given charge is 2.22 x 10⁻⁵ N.
(c) The work done by the field on the particle as it moves from the higher potential plate to the lower is [tex]8.88 \times 10^{-7} \ J[/tex].
(d) the change of the potential energy is [tex]8.88 \times 10^{-7} \ J[/tex].
The given parameters;
distance between the two metal plates, d = 40 mmpotential difference between the plates, V = 370 V(a) The magnitude of electric field in the region between the plates is calculated as;
[tex]E = \frac{V}{d} \\\\E = \frac{370 }{40 \times 10^{-3} } \\\\E = 9,250 \ V/m[/tex]
(b) The magnitude of the force the field exerts on a particle with the given charge is calculated as follows;
F = Eq
F = 9,250 x 2.4 x 10⁻⁹
F = 2.22 x 10⁻⁵ N
(c) The work done by the field on the particle as it moves from the higher potential plate to the lower is calculated as follows;
[tex]W = Fd\\\\W = 2.22 \times 10^{-5} \times 40\times 10^{-3} \\\\W =8.88 \times 10^{-7} \ J[/tex]
(d) the change of the potential energy is calculated as;
[tex]\Delta U = q \Delta V\\\\\Delta U = q(V_1 - V_2)\\\\\\Delta U = 2.4 \times 10^{-9}(370)\\\\\Delta U = 8.88 \times 10^{-7} \ J[/tex]
Learn more here:https://brainly.com/question/13014987
5. Two men, Joel and Jerry, push against a car that has stalled, trying unsuccessfully to get it moving. Jerry stops after 10 min, while Joel is able to push for 5.0 min longer. Compare the work they do on the car
Answer:
The work done by both Joel and Jerry is equal to 0 J.
Explanation:
The work done on a body by an external agency is the product of the force applied on the body and the distance through which the body moves. Therefore,
W = F.d
where,
W = Work Done on the Body
F = Force Applied on the Body
d = displacement covered by the body
In the given case of both Joel and Jerry, they are unable to move the car. It means that the displacement covered by the car is zero. Hence,
W = F(0)
W = 0 J (For both Joel and Jerry)
Two charged particles are projected into a region where a magnetic field is directed perpendicular to their velocities. If the charges are deflected in opposite directions, what are the possible relative charges and directions? (Select all that apply.)
Answer:
*If the particles are deflected in opposite directions, it implies that their charges must be opposite
*the force is perpendicular to the speed, therefore it describes a circular movement, one in the clockwise direction and the other in the counterclockwise direction.
Explanation:
When a charged particle enters a magnetic field, it is subjected to a force given by
F = q v x B
where bold letters indicate vectors
this expression can be written in the form of a module
F = qv B sin θ
and the direction of the force is given by the right-hand rule.
In our case the magnetic field is perpendicular to the speed, therefore the angle is 90º and the sin 90 = 1
If the particles are deflected in opposite directions, it implies that their charges must be opposite, one positive and the other negative.
Furthermore, the force is perpendicular to the speed, therefore it describes a circular movement, one in the clockwise direction and the other in the counterclockwise direction.
A 32-cm-long solenoid, 1.8 cm in diameter, is to produce a 0.30-T magnetic field at its center. If the maximum current is 4.5 A, how many turns must the solenoid have?
Answer:
16,931 turnsExplanation:
The magnetic field produced is expressed using the formula
[tex]B = \frac{\mu_0NI}{L}[/tex]
B is the magnetic field = 0.30T
I is the current produced in the coil = 4.5A
[tex]\mu_0[/tex] is the magnetic permittivity in vacuum = 1.26*10^-6Tm/A
L is the length of the solenoid = 32 cm = 0.32 m
N is the number of turns in the solenoid.
Making N the subject of the formula from the equation above;
[tex]B = \frac{\mu_0NI}{L}\\\\BL = \mu_0NI\\\\Dividing\ both\ sides \ by \ \mu_0I\\\\\frac{BL}{\mu_0I} =\frac{\mu_oNI}{\mu_0I} \\\\[/tex]
[tex]N = \frac{BL}{\mu_0I}[/tex]
Substituting the give values to get N;
[tex]N = \frac{0.3*0.32}{1.26*10^{-6} * 4.5}\\\\N = \frac{0.096}{0.00000567} \\\\N = 16,931.21[/tex]
The number of turns the solenoid must have is approximately 16,931 turns
g Doppler Radar gathers information about precipitation by sending out pulses of ______ energy that is reflected back by the precipitation towards the radar. Group of answer choices
Answer:
Doppler Radar gathers information about precipitation by sending out pulses of ___Radio wave___ energy
A 60 kg person is in a head-on collision. The car's speed at impact is 15 m/s . Estimate the net force on the person if he or she is wearing a seat belt and if the air bag deploys.
Complete question:
Seat belts and air bags save lives by reducing the forces exerted on the driver and passengers in an automobile collision. Cars are designed with a "crumple zone" in the front of the car. In the event of an impact, the passenger compartment decelerates over a distance of about 1 m as the front of the car crumples. An occupant restrained by seat belts and air bags decelerates with the car. In contrast, a passenger not wearing a seat belt or using an air bag decelerates over a distance of 5mm.
(a) A 60 kg person is in a head-on collision. The car's speed at impact is 15 m/s . Estimate the net force on the person if he or she is wearing a seat belt and if the air bag deploys.
Answer:
The net force on the person as the air bad deploys is -6750 N backwards
Explanation:
Given;
mass of the passenger, m = 60 kg
velocity of the car at impact, u = 15 m/s
final velocity of the car after impact, v = 0
distance moved as the front of the car crumples, s = 1 m
First, calculate the acceleration of the car at impact;
v² = u² + 2as
0² = 15² + (2 x 1)a
0 = 225 + 2a
2a = -225
a = -225 / 2
a = -112.5 m/s²
The net force on the person;
F = ma
F = 60 (-112.5)
F = -6750 N backwards
Therefore, the net force on the person as the air bad deploys is -6750 N backwards
A wheel has a rotational inertia of 16 kgm2. Over an interval of 2.0 s its angular velocity increases from 7.0 rad/s to 9.0 rad/s. What is the average power done by the torque
Answer:
128.61 WattsExplanation:
Average power done by the torque is expressed as the ratio of the workdone by the toque to time.
Power = Workdone by torque/time
Workdone by the torque = [tex]\tau \theta[/tex] = [tex]I\alpha * \theta[/tex]
I is the rotational inertia = 16kgm²
[tex]\theta = angular\ displacement[/tex]
[tex]\theta = 2 rev = 12.56 rad[/tex]
[tex]\alpha \ is \ the\ angular\ acceleration[/tex]
To get the angular acceleration, we will use the formula;
[tex]\alpha = \frac{\omega_f^2- \omega_i^2}{2\theta}[/tex]
[tex]\alpha = \frac{9.0^2- 7.0^2}{2(12.54)}\\\alpha = 1.28\ rad/s^{2}[/tex]
Workdone by the torque = 16 * 1.28 * 12.56
Workdone by the torque = 257.23 Joules
Average power done by the torque = Workdone by torque/time
= 257.23/2.0
= 128.61 Watts
HELP ILL MARK BRAINLIEST PLS!!!!
A patch of mud has stuck to the surface of a bicycle tire as shown. The stickiness of
the mud is the centripetal or tension force that keeps the mud on the tire as it spins.
Has work been done on the mud as the tire makes one revolution, if the mud stays
on the tire? Explain.
Answer:
Yes, work has been done on the mud.
Explanation:
Work is done on a body, when a force is applied on the body to move it through a certain distance. In the case of the mud, the tire exerts a centripetal force on the mud. The centripetal force moves the mud along a path that follows the circle formed by the tire in one revolution of the tire. The total distance traveled is the circumference of the circle formed. The work done on the mud is therefore the product of the centripetal force on the mud from the tire, and the circumference of the circle formed by the tire, usually expressed in radian.
The electric field strength is 1.70 × 104 N/C inside a parallel-plate capacitor with a 0.800 m spacing. An electron is released from rest at the negative plate. What is the electron's speed when it reaches the positive plate?
Answer:
Here, "v" is the velocity of electron and "V" is the potential.
Two carts connected by a 0.05 m spring hit a wall, compressing the spring to 0.02 m. The spring constant k is
N
100
m
What is the elastic potential energy stored from the spring's compression?
Choose 1 answer:
-3.0J
-0.045 J
0.090 J
0.045 J
Answer:
0.045 J
Explanation:
From the question,
The elastic potential energy stored in a spring is given as,
E = 1/2ke²...................... Equation 1
Where E = elastic potential energy, k = spring constant, e = compression.
Given: k = 100 N/m, e = 0.05-0.02 = 0.03 m
Substitute these values into equation 1
E = 1/2(100)(0.03²)
E = 50(9×10⁻⁴)
E = 0.045 J
Hence the right option is 0.045 J
Two carts connected by a 0.05 m spring hit a wall, compressing the spring to 0.02 m.The spring constant k is 100 N/m.
What is the elastic potential energy stored from the spring’s compression?
Answer: 0.045 J
An electromagnetic wave is propagating towards the west. At a certain moment the direction of the magnetic field vector associated with this wave points vertically up. What is the direction of the electric field vector?
Answer:
the electric field is pointing horizontal direction and in south direction
Explanation:
In an electromagnetic wave, the magnetic field and electrical field are perpendicular to each other and these are perpendicular to the direction of the waves.
Air is cooled in a process with constant pressure of 150 kPa. Before the process begins, air has a specific volume of 0.062 m^3/kg. The final specific volume is 0.027 m^3/kg. Find the specific work in the process.
Answer:
The pressure is constant, and it is P = 150kpa.
the specific volumes are:
initial = 0.062 m^3/kg
final = 0.027 m^3/kg.
Then, the specific work can be written as:
[tex]W = \int\limits^{vf}_{vi} {Pdv} \, = P(vf - vi) = 150kPa*(0.0027 - 0.062)m^3/kg = -5.25 kPa*m^3/kg.[/tex]
The fact that the work is negative, means that we need to apply work to the air in order to compress it.
Now, to write it in more common units we have that:
1 kPa*m^3 = 1000J.
-5.25 kPa*m^3/kg = -5250 J/kg.
The fastest pitched baseball was clocked at 47 m/s. Assume that the pitcher exerted his force (assumed to be horizontal and constant) over a distance of 1.0 m, and a baseball has a mass of 145 g.(a) What force did he produce on the ball during this record-setting pitch? (b) Draw free-body diagrams of the ball during the pitch and just after it left the pitcherâs hand.
Answer:
Explanation:
F ×1 = 0.5×0.145×47×47
F = 160.15 N
A meat baster consists of a squeeze bulb attached to a plastic tube. When the bulb is squeezed and released, with the open end of the tube under the surface of the basting sauce, the sauce rises in the tube to a distance h, as the drawing shows. Using 1.013 105 Pa for the atmospheric pressure and 1200 kg/m3 for the density of the sauce, find the absolute pressure in the bulb when the distance h is (a) 0.15 m and (b) 0.10 m.
Answer:
(a) P = 103064 Pa = 103.064 KPa
(b) P = 102476 Pa = 102.476 KPa
Explanation:
(a)
First we need to find the gauge pressure:
Gauge Pressure = Pg = (density)(g)(h)
Pg = (1200 kg/m³)(9.8 m/s²)(0.15 m)
Pg = 1764 Pa
So, the absolute Pressure is:
Absolute Pressure = P = Atmospheric Pressure + Pg
P = 1.013 x 10⁵ Pa + 1764 Pa
P = 103064 Pa = 103.064 KPa
(b)
First we need to find the gauge pressure:
Gauge Pressure = Pg = (density)(g)(h)
Pg = (1200 kg/m³)(9.8 m/s²)(0.1 m)
Pg = 1176 Pa
So, the absolute Pressure is:
Absolute Pressure = P = Atmospheric Pressure + Pg
P = 1.013 x 10⁵ Pa + 1176 Pa
P = 102476 Pa = 102.476 KPa
The absolute pressure in the bulb is approximately 1.031 x 10⁵ Pa when h = 0.15 m and 1.025 x 10⁵ Pa when h = 0.10 m.
Absolute pressure is the total pressure exerted by a fluid, including both the pressure from the fluid itself and the atmospheric pressure. It is the sum of the gauge pressure, which is the pressure above atmospheric pressure, and the atmospheric pressure. Absolute pressure is measured relative to a complete vacuum, where the pressure is zero.
In fluid mechanics, absolute pressure is important for determining the forces and behaviors of fluids in various systems. It is commonly expressed in units such as pascals (Pa), atmospheres (atm), pounds per square inch (psi), or torr.
The absolute pressure in the bulb can be calculated using the following formula:
P = P₀ + ρgh
where:
P is the absolute pressure in the bulb,
P₀ is the atmospheric pressure (1.013 x 10⁵ Pa),
ρ is the density of the sauce (1200 kg/m³),
g is the acceleration due to gravity (9.8 m/s²), and
h is the height of the sauce in the tube.
(a) When h = 0.15 m:
P = 1.013 x 10⁵ Pa + (1200 kg/m³) x (9.8 m/s²) x (0.15 m)
P ≈ 1.013 x 10⁵ Pa + 1764 Pa
P ≈ 1.031 x 10⁵ Pa
(b) When h = 0.10 m:
P = 1.013 x 10⁵ Pa + (1200 kg/m³) x (9.8 m/s²) x (0.10 m)
P ≈ 1.013 x 10⁵ Pa + 1176 Pa
P ≈ 1.025 x 10⁵ Pa
Learn more about Absolute Pressure, here:
https://brainly.com/question/13390708
#SPJ6
Suppose that 300 keV X-ray photons are aimed at a zinc cube (Zinc, Z = 30). According to the chart below, what effect will predominate when the X-rays hit the metal?
a) Photoelectric Effect 3
b) Compton Effect 3
c) Pair Production
Answer:
the answer is option A = photoelectric effect
Explanation:
If the threshold frequency of a metal is lower than the energy of X-rays, then photoelectric effect will happen.
Passengers in a carnival ride move at constant speed in a circle of radius 5.0 m, making a complete revolution in 4.0 s. As they spin, they feel their backs pressing against the wall holding them in the ride. A. What is the direction of the passengers' acceleration? a. No direction (zero acceleration) b. Directed towards center c. Directed away from center d. Directed tangentially B. What is the passengers' linear speed in m/s? C. What is the magnitude of their acceleration in m/s^2? D. What is their angular speed in rad/s?
Answer:
A. b) Directed towards center
B. [tex]v = 7.854\ m/s[/tex]
C. [tex]a_c = 12.337\ m/s^2[/tex]
D. [tex]w = 1.57\ rad/s[/tex]
Explanation:
The "force" that they feel pressing their backs against the wall is because the reaction to the centripetal acceleration .
A.
This acceleration has its direction towards the center of the circle. (option b)
B.
Their linear speed can be calculated with the equation:
[tex]v = (\theta/t)*r[/tex]
Where [tex]\theta[/tex] is the total angular position moved in radians ([tex]1\ rev = 2\pi\ radians[/tex]), 't' is the time elapsed for the angular position moved and 'r' is the radius. So we have that:
[tex]v = (2\pi/4)*5 = 7.854\ m/s[/tex]
C.
The centripetal acceleration is given by the equation:
[tex]a_c = v^2/r[/tex]
[tex]a_c = 7.854^2/5[/tex]
[tex]a_c = 12.337\ m/s^2[/tex]
D.
Their angular speed is given by the equation:
[tex]w = \theta/t = 2\pi/4 = \pi/2 = 1.57 \ rad/s[/tex]
The magnetic field strength at the north pole of a 2.0-cm-diameter, 8-cm-long Alnico magnet is 0.10 T. To produce the same field with a solenoid of the same size, carrying a current of 1.8 A , how many turns of wire would you need
Answer:
The number of turns of the solenoid is 3536 turns
Explanation:
Given;
magnetic field of the solenoid, B = 0.1 T
current in the solenoid, I = 1.8 A
length of the solenoid, L = 8cm = 0.08m
The magnetic field near the center of the solenoid is given by;
B = μ₀nI
Where;
μ₀ is permeability of free space = 4π x 10⁻⁷ m/A
n is number of turns per length
I is the current in the coil
The number of turns per length is calculated as;
n = B / μ₀I
n = (0.1 ) / (4π x 10⁻⁷ x 1.8)
n = 44203.95 turns/m
The number of turns is calculated as;
N = nL
N = (44203.95)(0.08)
N = 3536 turns
Therefore, the number of turns of the solenoid is 3536 turns
How much work is needed to move an object from one position to another when both positions are located the same distance from the center of the earth
Answer:
The product of the object's weight and the horizontal distance between the two positions.
Explanation:
Work is the product of force and the distance through which this force is moved. The distance moved can be vertical, or horizontal. For two bodies located the same distance from the center of the earth, the work done will be the product of the weight of the product and the horizontal distance between the two positions. If the vertical work is needed, then the work is zero, since there is no height gradient between them.
A particle accelerator fires a proton into a region with a magnetic field that points in the x-direction. (a) If the proton is moving in the y-direction, what is the direction of the magnetic force on the proton
Answer:
The magnitude of the magnetic field will act in a direction towards me.
Explanation:
When a charged particle enters a magnetic field, it is deflected. The direction of travel of the particle is deflected, but the kinetic energy of the particle is not affected. The force experienced by a charged particle as it enters a magnetic field that acts perpendicular to the path of the velocity of the particle, will produce a force that is perpendicular to both the direction of travel of the particle and the direction of the magnetic field. In this case, the proton moves in the y-direction, the magnetic field is in the x-direction, therefore the force experienced by the particle will be towards me.
Unpolarized light enters a polarizer with vertical polarization axis. The light that passes through passes another polarizer with transmission axis at 40 degrees to the horizontal. What is the intensity of the light after the second polarizer expressed as a fraction of the original intensity
Answer:
I = 0.2934 I₀
Explanation:
The expression that governs the transmission of polarization is
I = I₀ cos² θ
Let's apply this to our case, when the unpolarized light enters the first polarized, the polarized light that comes out has the intensity of
I₁ = I₀ / 2
this is the light that enters the second polarizer
I = I₁ cos² θ
we substitute
I = I₀ / 2 cos² 40
I = I₀ 0.2934
I = 0.2934 I₀
Which scientist's work led to our understanding of how planets move around
the Sun?
A. Albert Einstein
B. Lord Kelvin
C. Johannes Kepler
D. Edwin Hubble
Answer:
Johannes KeplerExplanation:
He made rules about planetary motion.The scientist Johannes Kepler was a German astronomer.He found out that the planets evolved around the Sun.He also made the laws of planetary motion.Hope this helped,
Kavitha
what is the largest star in our night sky