Answer:
4.5 × 1015 J
Explanation:
Energy was released through this form of mass.
The energy released if a sample loses 0.05 kg mass through
radioactive decay is 45 ×10¹⁴ J.
What is Energy?The ability to do work is called energy.
The Einstein's formula can be used to find the energy released. Energy is the product of mass and the velocity of light in a vacuum squared.
Given that the mass is 0.05 kg and speed of light in vacuum is 3×10⁸ m/s.
E = 0.05 × (3×10⁸)²
E = 45 ×10¹⁴ J
The energy is released if a sample loses 0.05 kg mass through
radioactive decay is 45 ×10¹⁴ J.
Learn more about Energy.
https://brainly.com/question/17858145
#SPJ2
Researchers are studying a fish population in a small pond that has algae as the only producer in the ecosystem. The scientists are concerned about what might happen to the fish, if the algae suddenly disappear. Why is this a concern? What might be done to prevent this from occurring?
Explanation:
Algae is a group of a photosynthetic eukaryotic organisms that plays a very important role on the ecosystem. It forms the lower base of the food chain and supports all the life forms of the ecosystem. It takes up water and carbon dioxide from the atmosphere to prepare food during the process of photosynthesis and maintains a balance in the ecosystem.
In the context, if the algae disappears, the fish might die as the small fishes feeds on this algae. This is a concern as the algae is main component of food source and forms the base of the food chain. If there will be no algae there will be no life form on earth, as all species depend on each other to survive.
In order to prevent this from occurring, we must protect our algae. We must plant more trees, keep our water bodies healthy, we should not litter our ponds and lakes. We should also help these algae to grow and survive so that other life forms can feed them and thus maintain the ecosystem.
When first mixed, concrete can be described as (Blank)
, which means it can take the shape
of the formwork provided.
One of the main components of an airbag is the gas that fills it. As part of the design process, you need to determine the exact amount of nitrogen that should be produced. Calculate the number of moles of nitrogen required to fill the airbag. Show your work. Assume that the nitrogen produced by the chemical reaction is at a temperature of 495°C and that nitrogen gas behaves like an ideal gas. Use this fact sheet to review the ideal gas law.
The number of moles of the gas is 0.016 moles
What is the airbag reaction?We know that in the airbag, nitrogen gas is obtained by the decomposition of sodium azide as follows; 2NaN3 -----> 2Na + 3N2
Since it is under ideal conditions;
P = 1 atm
V = 1 L
T = 495°C or 768 K
n = ?
R = 0.082 atm LK-1mol-1
From;
PV= nRT
n = PV/RT
n = 1 atm * 1 L/ 0.082 atm LK-1mol-1 * 768 K
n = 0.016 moles
Learn more about ideal gas law;https://brainly.com/question/13821925
#SPJ1
Isaiah rolls a tennis ball along the ground. Which of the following best explains what will happen if forces act on the ball?
Answer:
what are the following
Explanation:
what are the options?
Answer:
the ball will stop moving
Which fraction contains the largest molecules?
A) diesel
B)gasoline
C)kerosene?
Ice converts into water by absorbing heat. Explain
Here heat is absorbed to break the crystalline nature of ice and to make well separation between water molecules.
Explanation:
Latent heat, energy absorbed or released by a substance during a change in its physical state (phase) that occurs without changing its temperature. ... Ice cubes melting as their temperature rises. During melting, the ice absorbs latent heat, which is used to change the state of the water from ice to liquid water.
Review the chart of all the domesticated rabbits. The different types of rabbits are listed by their scientific names. If you were a
rabbit breeder, which rabbits could you breed to produce fertile offspring? Explain.
A)
All of the rabbits listed. They are all rabbits.
B)
None of these rabbits. They are all different species.
C)
Any of the cottontail rabbits They are the same species.
D)
Any of the rabbits on the same branch in the chart because that means
they are closely related.
Answer: None of these rabbits listed. they are all different species
Explanation:
I got it right on usatestprep
What the common uses for Rutherfordium???
Answer:
welcome
Explanation:
Uses of Rutherfordium
Because rutherfordium is made within the lab, there are not very many uses for this element commercially. On the other hand, rutherfordium has been used within the laboratory setting to conduct research. Most elements that are highly radioactive are used for nuclear power and medicinal purposes.
Somebody look at all the science questions i posted plzzz help ( i will give brainliest
Answer:
ok
Explanation:
what happens to the wavelength as frequency increases
Explanation:
The higher the wavelength, the lower its frequency and energy
Answer:
As frequency increases wavelength decreases in size
Explanation:
The wavelength of the wave is inversely proportional to the frequency of the wave as the speed of the wave remains constant.
v = fλ ( v - speed, f - frequency, -wavelength)
[tex]\frac{v}{\lambda}[/tex] = f
Therefore at constant speed:
f ∝ [tex]\frac{1}{\lambda}[/tex] (inversely proportional)
Convert 15.75 grams of Magnesium to atoms.
Answer: [tex]3.903\times 10^{23}[/tex]
Explanation:
Given
Mass of magnesium is [tex]m=15.75\ gm[/tex]
The molar mass of magnesium [tex]M=24.3\ g/mol[/tex]
No of moles in 15.75 g of magnesium is
[tex]\Rightarrow n=\dfrac{15.75}{24.3}\\\\\Rightarrow n=0.648\ \text{moles}[/tex]
1 mole contains [tex]6.022\times 10^{23}[/tex] atoms
So, 0.648 moles contain [tex]0.648\times 6.022\times 10^{23}[/tex]
[tex]=3.903\times 10^{23}\ \text{atoms}[/tex]
which do you think will warm up the plate more quickly?
A. Direct sunlight
B.Indirect sunlight
Answer: B
your welcome Bsbssnsnsmsllqql
are the bonds of OCl2 polar?
Answer: OCl2 is polar because the two O-Cl bond dipoles don't cancel each other.
Students in a science class prepared flash cards so that they could quiz one another about the
arrangement of the periodic table. One of the flash cards contained information about two
elements, Element L and Element M.
Qualities:
-Atom of element M has two more balances electrons than element atoms of L
- atoms of element L are more reactive than atoms of element M
-both elements are metals
The students had to use the information on n the flash cards to determine possible positions of the two elements on a blank periodic table. Which periodic table has the elements placed in the locations that match the information on the flash cards?
Answer:
the periodic table is G.
The periodic table has the elements placed in the locations that match the information on the flash cards is F.
What is periodic table?The term "periodic table" refers to an arrangement of all known elements in order of increasing atomic number and recurrent chemical attributes. The periodic table is organized into 118 elements.
The term "periodic table" can also refer to a table that lists all known chemical elements in rows and columns.
In the F table, L is found in alkaline earth metals while M is found in transition metals. M has more valence electrons than L, while L is more reactive than M.
Thus, the periodic table has the elements placed in the locations that match the information on the flash cards is F.
To learn more about periodic table, refer to the link below:
https://brainly.com/question/11155928
#SPJ5
Moseley discovered that elements with similar properties occurred at regular intervals when the elements were arranged in order of increasing
Moseley discovered that elements with similar properties occurred at regular intervals when the elements were arranged in order of increasing
" Atomic number "
This graph represents an endothermic reaction. What does it show about the potential energy of reactants and products? Abuzua nunuad in Reaction progress A. The comparison of potential energy depends on what the reactants and products are, B. The potential energy of the products is greater than the potential energy of the reactants C. The potential energy of the reactants equals the potential energy of the products D. The potential energy of the reactants is greater than the potential energy of the products,
Answer:
The potential energy of the products is greater than the potential energy of the reactants
Explanation:
i just took the test
In an endothermic reaction, activation potential energy of reactants is less than that of the products. Reactants in endothermic reaction are absorbing enough heat energy to overcome this barrier potential. Hence, option B is correct.
What is an endothermic reaction?An endothermic reaction is the one in which heat energy is absorbed by the reactants from the surroundings. In endothermic reactions, the enthalpy change is positive.
The minimum energy that the reactants have to acquire for effective collision and reaction is called the activation energy. By absorbing heat energy reactants becomes more energetic and overcome this activation potential.
Therefore, in an endothermic reaction, the activation potential of products will be higher than that of the reactants and the energy diagram clearly exhibit this transition in energy. Hence, option B is correct.
Find more on endothermic reaction:
https://brainly.com/question/23184814
#SPJ2
What is the difference between an imprint and an impression?
Answer:
As nouns the difference between impression and imprint
is that impression is the indentation or depression made by the pressure of one object on or into another while imprint is an impression; the mark left behind by printing something.
The term imprint is defined as to mark by or as if by pressure and the term impression is defined as the effect produced by impressing.
What is the difference between an imprint and an impression?The difference between an imprint and an impression is that the imprint is the mark left behind when anything is printed, whereas the impression is the indentation or depression caused by the pressure of one object against or into another.
While a shoe won't make an impression in loose sand, it will on a hard surface like concrete or linoleum. These imprints or impressions might be contrasted with the shoe of a suspect or the tire of a car to see if they belong to the same object.
Thus, The term imprint is defined as to mark by or as if by pressure and the term impression is defined as the effect produced by impressing.
To learn more about the imprint and the impression, follow the link;
https://brainly.com/question/20410964
#SPJ2
The pH of a solution with a Hydronium (H30+) ion concentration of 0.001M is
Answer:
The pH of a solution with a Hydronium (H₃O⁺) ion concentration of 0.001 M is 3.
Explanation:
pH, short for Hydrogen Potential, is a measure used to establish the level of acidity or alkalinity of a solution.
pH indicates the amount of hydrogen ions present in a solution or substance. Mathematically the pH is the negative logarithm of the molar concentration of hydrogen ions or protons (H⁺) or hydronium ions (H₃O⁺).
pH= - log [H⁺]= - log [H₃O⁺]
The pH scale goes from 0 to 14. Values less than 7 indicate the range of acidity and those greater than 7 indicate alkalinity or basicity. The value 7 is considered neutral.
In this case, [H₃O⁺]= 0.001 M.
Replacing in the definition of pH:
pH= - log (0.001 M)
Solving:
pH= 3
The pH of a solution with a Hydronium (H₃O⁺) ion concentration of 0.001 M is 3.
A solution is prepared by dissolving 150. grams of NaCl in 500 milliliters of water. What is the
molarity of the solution?
Answer:
Explanation:
The answer should be .00500M
The molarity of the solution is = 5.12M
Molarity of the solutionThe molarity of a solution is the measures the number of moles of a solute per liter of a solution.
Molarity = moles solute/Liter solution
Molar mass of sodium (Na) = 23g
Molar mass of chlorine (Cl) = 35.5g
Molar mass of NaCl = 23 + 35.5 = 58.5g/mol
To calculate the quantity of moles in 150g of NaCl,
1mol = 58.5g
xmol = 150g
Cross multiply,
xmol= 150×1/58.5
= 2.56mol
To convert 500mL to Liters,
500/1000 = 0.5 Liters
Substituting into the equation, Molarity = moles solute/Liter solution
Molarity= 2.56/ 0.5 = 5.12M
Learn more about molarity here:
https://brainly.com/question/14469428
____ occurs when the vapor pressure of a liquid is equal to the external atmospheric pressure.
Answer:
c
Explanation:
boiling
The extraction of zinc from zinc blend and explain how the zinc oxide be reduced using Carbon monoxide Electrolysis
Answer:
Zinc blend is Zinc sulphide, ZnS.
ZnS is roasted in air producing ZnO and Sulphur dioxide.
ZnO is reduced to Zn by CO.
Further purification is done by electrolysis.
In P plants the gene for the color of the sea has two alleys in the punnets square show me love the dominant alley Y represents yellow and recessive alley Y represents green based on the punnets square what percentage of offspring would be expected to have a green seeds
Answer:
25%.
Explanation:
In the F1 generation, the yellow colour is dominant so 75% of the seeds are yellow colour while on the other hand, 25% seeds are green in colour due to recessive allele. In the F1 generation, the ratio of dominant to recessive allele is 3:1. So on the basis of this 3:1 ratio we can say that there is 75% of yellow colour seeds and 25% of green colour seeds in the population of F1 generation.
1.
Events in which molten rock spews out of
the mantle as ash, lava, and gases
Answer:
Landslides, Volcanoes, Earthquakes, and Floods. A opening in the Earth's surface through which melted rock, gases, and ash escape. Events in which molten rock spews out from the mantle to the surface of Earth as ash, lava, and gases
Explanation:
what scientific term is uses to refer to the sharing of electrons between/ among atoms in order for the to attain stability?
Answer:
Covalent bonds
Explanation:
Covalent bonding
Covalent bond refers to mutual sharing of electrons between two atoms
How many grams of sucrose will I add to the water (0.100 L) in order to make the 3 molal solution.
Answer:
mass = 102.69 g of sucrose
Explanation:
First, you need to use the correct expression of molality (m) which is the following:
m = moles / kg solvent (1)
According to the exercise, we need to get the grams, in other words, the mass of the sucrose. To get the mass, we need the moles and molecular weight of sucrose and use the following expression:
moles = mass / MM (2)
Now, if we replace (2) in (1) we have:
m = mass / MM * kg solvent (3)
From here, we solve for the mass and then:
mass = m * MM * kg solvent (4)
Now, then density of water is 1 kg/L, so, the volume of the water will be the same as it's mass, and the molality is 3 m. The molecular weight of the sucrose is (according to several sources) 342.3 g/mol. Replacing all the data in (4) we have:
mass = 3 mol/kg * 0.1 kg * 342.3 g/mol
mass = 102.69 g of sucroseHope this helps
An aqueous solution has a hydroxide-ion concentration of 1.0x10^-3M. What is the pH of the solution?
a.11
b.3
c.-3
d.7
thermal conductors what
an example of no chemical reaction occurring
in gizmos
Answer:
Hydrogen + Helium
Explanation:
No reaction occurs
Put these events in order.
= Your phone contacts a base station in a cell.
= Once connected, a duplex system allows you to talk to the other person at the same time.
= You dial a number on your cell phone.
The MTSO then connects you to the other device.
= A base station contacts the Mobile Telephone Switching Office (MTSO).
Answer:
You dial a number on your phone
Your phone contacts a base station
The base station contacts the MTSO
The MTSO connects you to the other device
You talk to the person on the other device.
Speed is the rate of change of position expressed as _____ traveled per unit of time. A. direction B. meter C. displacement D. distance... Help!!!
Answer:
Distance
Explanation: