how minimising the use of cars can help save the ozone layer​

Answer:

[tex]K=1.12x10^9[/tex]

Explanation:

Hello there!

Unfortunately, the question is not given in the question; however, it is possible for us to compute the equilibrium constant as the problem is providing the concentrations at equilibrium. Thus, we first set up the equilibrium expression as products/reactants:

[tex]K=\frac{[NO_2]^2}{[NO]^2[O_2]}[/tex]

Then, we plug in the concentrations at equilibrium to obtain the equilibrium constant as follows:

[tex]K=\frac{(0.95)^2}{(0.0024)^2(0.00014)}\\\\K=1.12x10^9[/tex]

In addition, we can infer this is a reaction that predominantly tends to the product (NO2) as K>>>>1.

Best regards!

Bohr: Electrons move in circular paths that have different energies.

Thomson: Atoms contain electrons.

Dalton: Matter is made up of indivisible atoms.

Schrodinger and others: Electrons exist in a cloud of probability.

Rutherford: The mass of an atom is concentrated in its center.

Answer:

The screenshot shows all the answers

Explanation:

Explanation:

False, gray whales average 75 miles per day at a speed of 5 mph and is the longest annual migration of any mammal.

Answer:

That would be speed.

Explanation:

Answer:

jjjjajwhejwhswjiwiwvssvwvow9qiwgdvdbslw

Answer:

a) 226.6 grams of Cl₂

b) 19.2 grams of C

c) 303.2 grams of TiCl₄ and 70.4 grams of CO₂

Explanation:

The balanced chemical reaction is the following:

TiO₂(s) + C(s) + 2 Cl₂(g) → TiCl₄(s) + CO₂(g)

(a) What mass of Cl₂ gas is needed to react with 1.60 mol TiO₂?

From the chemical equation, 1 mol of TiO₂ reacts with 2 moles of Cl₂. So, the stoichiometric ratio is 2 mol Cl₂/1 mol TiO₂. We multiply this ratio by the moles of TiO₂ we have to calculate the moles of Cl₂ we need:

1.60 mol TiO₂ x 2 mol Cl₂/1 mol TiO₂ = 3.2 mol Cl₂

Now, we convert from moles to mass by using the molecular weight (MW) of Cl₂:

MW(Cl₂) = 35.4 g/mol x 2 = 70.8 g/mol

mass of Cl₂= 3.2 mol x 70.8 g/mol = 226.6 g

Therefore, 226.6 grams of Cl₂ are needed to react with 1.6 mol of TiO₂.

(b) What mass of C is needed to react with 1.60 mol of TiO₂?

From the chemical equation, 1 mol of TiO₂ reacts with 1 moles of C(s). So, the stoichiometric ratio is 1 mol C/1 mol TiO₂. We multiply this ratio by the moles of TiO₂ we have to calculate the moles of C(s) we need:

1.60 mol TiO₂ x 1 mol C(s)/1 mol TiO₂ = 1.60 mol C(s)

So, we convert the moles of C(s) to grams as follows:

MW(C) = 12 g/mol

1.60 mol x 12 g/mol = 19.2 g C(s)

Therefore, a mass of 19.2 grams of C is needed to react with 1.60 mol of TiO₂.

(c) What is the mass of all the products formed by reaction with 1.60 mol of TiO₂?

From the chemical equation, we can notice that 1 mol of TiO₂ produces 1 mol of TiCl₄ and 1 mol of CO₂. So, from 1.60 moles of TiO₂, 1 mol of each product will be produced:

1 mol TiO₂/1 mol TiCl₄ ⇒ 1.60 mol TiO₂/1.60 mol TiCl₄

1 mol TiO₂/1 mol CO₂ ⇒ 1.60 mol TiO₂/1.60 mol CO₂

Finally, we convert the moles to grams by using the molecular weight of each compound:

MW(TiCl₄) = 47.9 g/mol Ti + (35.4 g/mol x 4 Cl) = 189.5 g/mol

1.60 mol x 189.5 g/mol = 303.2 g

MW(CO₂) = 12 g/mol C + (16 g/mol x 2 O) = 44 g/mol

1.60 mol x 44 g/mol = 70.4 g

Therefore, from the reaction of 1.60 mol of TiO₂ are formed 303.2 grams of TiCl₄ and 70.4 grams of CO₂.

Answer:

canals and irrigation is the answer

Answer:

im gonna say A

Explanation:

i say A because i mean biotic potential is residing in the catagory birth rate which is how many the lay a year penguins have already reached the amount they are gonna lay robins the literally have no exact stop point its between 5 and 10 a year like said. so if u look at the amount they have each they have both reached there maximum point. but penguins only lay eggs once a year while robins well 5 to 10 reaching there maximum potential.

Answer:

I think it is either a or b

Explanation:

c or d has the correct names and Roman numerals.

I think the answer is: C. An endothermic reaction that decreases in entropy

An endothermic reaction that decreases in entropy. Hence, option C is correct.

Entropy is the energy of a system that is unuseful to do work.

For a reaction to be spontaneous, the Gibbs' Free Energy must be negative.

The equation for Gibbs Free energy is given by:

G= H-TS

Where, G = Gibbs free energy

H = Enthalpy of the reaction

T = Temperature of the system

S = Entropy of the system

Sign convention for all the quantities:

For H: It is negative for exothermic reactions and positive for endothermic reactions

For S:  It is positive when there is an increase in entropy and it is negative when there is a decrease in entropy.

If we want G to be negative, the conditions necessary are:

G= (-ve) - (+ve) = -ve

The product of temperature and entropy must be positive and that will be positive when there is increase in entropy at any temperature.

Hence, option C is correct.

Learn more about enthalpy and entropy, here:

brainly.com/question/8916312

#SPJ5

Answer:

Granite

Explanation:

Answer:

Granite

Explanation:

Igneous forms when rock is cooled and hardens by Magma.

And the option granite, which forms as magma cools deep underground

Hope it helps have a Good Day

Answer: Lithium, an alkali metal with three electrons, is also an exception to the octet rule. Lithium tends to lose one electron to take on the electron configuration of the nearest noble gas, helium, leaving it with two valence electrons. There are two ways in which atoms can satisfy the octet rules.

Explanation: Hope this helped! :)

Answer: 44.706g Al2O3

Explanation:

4A1 + 302 → 2Al2O3

3×(16×2) 2{(27×2)+(16×3)}

= 96 = 204

So

To produce 204g of Al2O3,We need . 96g of O2

To produce 1g of Al2O3,We need

. (96÷204)= 0.47g of O2

To produce 95g of Al2O3,We need

. (0.47×95)= 44.706g of O2

.

So, 44.706 grams of oxygen (O2)

are needed to produce 95 grams of

aluminum oxide (Al2O3).

Answer:

All igneous rocks the basis of the rock cycle are formed by plate tectonics. ... The heat from the mantle that fuels plate tectonics causes both igneous and sedimentary rocks to be turned into metamorphic rocks. The metamorphic rocks can be eroded into sedimentary rocks are remelted back into igneous.

Explanation:

Answer:

Explanation:  A conversion factor is a number used to change one set of units to another, by multiplying or dividing. When a conversion is necessary, the appropriate conversion factor to an equal value must be used. For example, to convert inches to feet, the appropriate conversion value is 12 inches equal 1 foot.

Answer: Hello, This is my most favorite class so I know this is right.

The most Reactive metal source is Copper.

Explanation:

This is the most reactive because it contains Lithium supplement.

Your Welcome! Mark me as Brainliest! :)

Answer:

B

Explanation:

Weathering is the physical and chemical breakdown of rock at the earth's surface. ... The physical breakdown of rock involves breaking rock down into smaller pieces through mechanical weathering processes. These processes include abrasion, frost wedging, pressure release (unloading), and organic activity.

Answer:

3, 2

Explanation:

Balanced equation:

N2 + 3 H2 = 2 NH3

Answer:

1.031atm

Explanation:

Answer:

The element is in group 7, the halogens. The element is in the third period or row of the table.

Explanation:

Chlorine is element number 17.

Answer:

156748

Explanation:

The first number is on the magnetism card 1

The combination  contains only the numbers found on the cards showing techniques to separate mixtures 1,5,6,7,8

The last number is on the filtering card

The red is in the middle half of 8 is 4

Answer: the answer is 12M

Explanation: 3.0mol/ 0.25L =12M

12M is the molarity of a solution made from dissolving 3.0 moles of Saline (NaCl) in 0.25 L of solution.

The amount of molecules of molecules divided by the quantity of liters in solution is the definition of molarity, a concentration unit in chemistry. It is crucial to comprehend how it is calculated as well as when to employ it in comparison to other units because it is among the most widely used concentration units.

A chemical solution's concentration is measured in molarity (M). It refers to the solute's moles per liter of solution. To be clear, this is not the same as the liters of solvents (a common mistake).

molarity = number of moles of solute/ volume of solution in litre

molarity =3.0mol/ 0.25L

             =12M

Therefore, 12M is the molarity of a solution made from dissolving 3.0 moles of Saline (NaCl) in 0.25 L of solution.

To know more about molarity, here:

https://brainly.com/question/29884686

#SPJ2

Answer: Nerves, Brain and spinal cord

Explanation:the other choices are either part of the cardiovascular system or the respiratory system

Molality = moles of solute/mass (in kg) of solvent

The solute here is NaCl, of which you have 40 g or 40/58.4428 = 0.6844 moles NaCl.

The solvent here is water, of which you have 1500 g or 1.500 kg H2O.

The molality of the resulting solution would thus be 0.6844 moles NaCl/1.500 kg H2O = 0.4562 mol/kg.

If you have to consider sig figs, then your final answer would have one sig fig (40 g has one sig fig). In that case, your final answer would be 0.5 mol/kg.

Answer:

Ture

Explanation:

Ture

True

True

True

Explanation:

Equiv means equivalent ...

Answer:

There were originally 8 atoms of Potassium-40.

Explanation:

The half-life of a radioactive material is the time taken for half the original material to decay or the time required for a quantity of the radioactive substance to reduce to half of its initial value.

If the original material formed without any Argon-40, it means that the atoms originally present were Potassium-40 atoms.

Presently, there are 7 Argon-40 atoms for every 1 of Potassium-40, we can deduce the number of half-lifes the Potassium-40 has undergone as follows :

After one half-life, (1/2) there will be one Potassium-40 atom for every Argon-40 atom.

After a second half life, 1/2 × 1/2 = 1/4: there will be one Potassium-40 atom for every three atoms of Argon-40.

After a third half-life, 1/4 × 1/2 = 1/8: there will be one Potassium-40 atom for every 7 atoms of Argon-40.

Since there are 1/8 atoms of Potassium-40 presently, there were originally 8 atoms of Potassium-40.

Answer:

1. B. Ammonia and hexane will not dissolve because one molecule is polar and the other is non polar.

2. 1400 mL

Explanation:

In chemistry, like dissolve like! Ammonia is a polar molecule having a significant dipole moment owing to its three N-H bonds. On the other hand, hexane is a purely non-polar hydrocarbon hence the two substances can never dissolve in each other.

From the dilution formula;

C1V1=C2V2

C1= Initial concentration of the solution

V1 = Initial volume of the solution

C2 = Final concentration of the solution

V2= Final volume of the solution

2.8 M * 750.0 mL = 1.5 M * V2

V2 = 2.8 M * 750.0 mL/1.5 M

V2 = 1400 mL